Problem Activating Contribute 3 - computer clock not synched
Recently installed Windows 7 and needed to install Contribute 3. Previously using Contribute 2 but lost serial number. When trying to activate I receive 'It appears that your computer clock is not current. Please adjust time and date settings and then click Activate to attempt activating this software again'.
This I have done and checked but to no avail.
Any suggestions please before my wife loses patience with me, it's her website I am trying to manage.
Regards
Greenrobzo
Contribute 3 is not certified and tested with Windows 7 64 bit Operating system. Also Activation server for the Old Macromedia products has been disabled. Please check the document linked below and use the serial key available for Contribute 3 for activation. It may works.
https://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
Regards,
Rajeev.
Similar Messages
-
My iphone is activated in my computer but not on iphone whats the next step
my iphone is activated in my computer but not on iphone whats the next step
It sounds to me like you either got defective parts or otherwise did not make the repair correctly. We cannot help with self-repairs here, the iPhone officially not user servicable, but you can ask for advice in the forums on ifixit.com, a site which is dedicated to those attempting their own repairs.
Regards. -
my ipod is not synching. i plug in usb cable and it asks for id and password. i enter these and it then asks if i want to authorize, dont authorize or cancel. I click autorize it says synching ipod. then comes up that this computer is 2 of 5 that is authorized. However it is not updating any new playlists or purchasded material. I dont want to click dont authorize as I'm afraid I will lose music
Delete them from your library including files, the go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free
-
Media on computer is not synching onto the ipod
Previously downloaded music on my computer shows up in the ITUNES Library but does not synch onto my IPOD Touch.
Recently downloaded the newest version of ITunes on my Windows 8 Ultrabook (ACER) 64 bit.
Copied my music from my backup drive after ITUNES install wiped my IPOD clean.
Now, my IPOD won't synch and pickup my music from my computer.Hello Virginian,
Thanks for the question and welcome to Apple Support Communities.
I understand you are having issues with iTunes Wi-Fi Syncing. The following article outlines potential symptoms and resolutions:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/TS4062
Thanks,
Matt M. -
ipod nano won't synch, i haven't purchased anything in a long time and haven't synched with the computer just charged on car charger. when i plugged the nano in it tried to install a driver and that failed and now the computer and itunes won't even recognize that the nano is plugged in.
REPOST (this solved my problem!!)
originally posted by shootme78
"The device manager just needed to be prompted to use the driver for an Apple Mobile Device instead. The Apple driver was already in my PC - I just had to prompt the device manager to use it instead of the camera driver it kept installing. Here's what I did:
I right-clicked the iPhone in Device Manager and chose Update Driver (for me, the iPhone was showing up in the Device Manager under Imaging Devices).
I selected "Install from a list or specific location (Advanced)" and clicked Next.
I chose "Don't search. I will choose the driver to install" and clicked Next.
In the next window there were 2 drivers to choose from: the "Digital Still Camera" driver that my PC kept thinking the iPhone was, and Apple Mobile Device USB Driver. I selected the Apple Mobile Device driver.
The driver installed, and at that point iTunes 9.2 could finally detect the iPhone. Yay!"
if you still confused, this is the real post by shootme78
https://discussions.apple.com/message/11761418#11761418?messageID=11761418
this solution worked with every itunes version
* i tried this on itunes 10.6.3.25
Hope this will also solve your problem -
The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Hi
I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer. Any suggestions.? Anyone have any suggestions?
-
When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).
This is normally to do with activation. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ensure you have your serial number.
Click here to get help now Contact Customer Care -
Computer clock resets to 1969. PRAM battery probably not the issue.
I have a PowerMac G4 mirrored doors computer running Tiger 10.4.11 that occasionally starts up with that error message saying: "Your computer's clock is set to a date before March 24th, 2001. This may cause some applications to behave erratically."
I know all about resetting the PRAM, resetting the NVRAM, and replacing a weak, or expired battery. I've read the relevant posts on the subject, in which well-intentioned guides say that the problem is "usually" or "generally" related to the PRAM battery. Well, I wish it could be that simple, because I have already had a new battery installed, and the problem continues. It is intermittent; it's been occurring for about six months now; and it persists.
I seek technical assistance and successful, problem-solving suggestions that go beyond merely suggesting that I zap the PRAM or replace the battery.
If there are potential SOFTWARE problems, please direct me to those potentially damaged files. None of the disk utilities that I have used—including Disk Warrior, TechTool Pro, OnyX, Cocktail, or Drive Genius— find anything wrong with my hard drive or the files on it. No corrupted resources are reported. Additionally, Intego's Virus Barrier finds no infected files either.
However, a FileBuddy search of files modified before 3/25/2001 finds several dozen files with improbable dates of 12/31/1969 or 1/1/1970. Fewer files dated 12/31/1969 occur after I go to the Date/Time preferences pane and reset the clock to the current date/time and then restart my computer, especially in regards to system-related files. Nonetheless, several dozen files with a 12/31/1969 still remain, even after the date/time reset and the system restart.
I do not know if any of those pre-historic files are playing a role in this chronic problem, so I offer that information for the technically more astute to ponder upon and factor in to any solutions which might be offered. I have read posts where someone might suggest a re-install of Tiger, but the original poster almost always reports that re-installing Tiger did not eliminate problem, so I would prefer suggestions that rely on a scalpel rather than a sledge hammer.
If someone suspects that there may be hardware problem, I would like to hear theories along that line, too, although I am unlikely to consider gutting the hardware items just to retain the attractive computer case. Even though I do have other computers (an iMac G5 and a MacBook Pro), the PowerMac G4 is my preferred workhorse, and it is the only one configured to run Final Cut Pro (version 4.5; I can't afford to upgrade now), so I want to keep it functional without a major investment into an older machine.
When the computer clock problem first reared its irritating head several months ago, it was accompanied with kernel crashes that turned out to be related to the nVidia video card. I brought the machine in to a local shop, because it was refusing to power on. They installed a new battery to replace the original, probably weak original battery, and they replaced the probably defective nVidia video card with a used nVidia card I found on eBay. The shop also claimed that I needed to replace the motherboard and the power supply to ensure that the G4 would power on and that it would present a desktop without the warning message about the computer clock being set to 12/31/1969.
I decided to reject their assessment, since the whole repair job would have amounted to about $1,100. It seemed like an excessive solution. Since taking the G4 back about three months ago with only the new battery and the replacement video card installed, the computer has powered on every single time without fail, which, to my non-technician mind, would appear to indicate that the power supply is OK. However, I do still get an occasional warning about the computer clock being set to a date before March 24th, 2001.
I do not have the technical expertise or repair knowledge to know if the problem is hardware-related, software-related, power supply-related, or a complex interaction between all of them. If someone can suggest a permanent fix to eliminate the computer clock error problem WITHOUT requiring me to make a major investment in repairing or replacing hardware components, that would be ideal. On the other hand, if this clock problem is merely is an irritant, but not a sign of something more serious or expensive, then I am willing to live with it and get around the problem by going through the steps of resetting the clock when required and then restarting the computer with a correctly set clock.
My main goal, of course, is to have a reliable, stable computer. If it costs too much to eliminate the computer clock irritation on a permanent basis, then I am willing to live with the problem, as long as its presence does not disrupt my work flow. In that case, I would appreciate it if someone could explain what might be going on, so that I know what to expect and what to do about it.
I hope this is sufficient information with which to make a diagnosis and recommendation. If not, ask for more. Thanks.
bowlerboyShort answer =
5) Upon reboot after re-connection and re-start, the Date & Time shows...
a) in the Date & Time pane: 12/31/1969 at 7:00 PM, and counting
b) in the Finder's menu bar: 7:00 PM, and counting
What do the results of this test tell you? Is this a software or a hardware problem?
======================================================================
Long answer =
Thanks, BDAqua, for offering your help. I'm not exactly new to these forums, but somehow my previous contributions have all been wiped out, so I've restarted under a new account name.
I've had my G4 MDD for five years, and it's always been quite stable for me, so I'm not quite sure that this model is "cantankerous." I do find the computer clock error message irritating, though, so it would be nice to know the source of the problem and its permanent solution.
Since my original posting, I elected not to Shut Down the G4 to see what would happen. It functioned just fine since then, allowing me to create some short Final Cut Pro movies as Christmas presents to family members. With one exception, all other applications also functioned without problems. The only problem I'm encountering has to do with H-P Photosmart Studio, an application bundled with the HP All-in-one model C7280. It will not settle down to work, forcing me to Force Quit it every time. Since that app works fine on my iMac G5, I decided to trouble-shoot it by reinstalling the HP software, a process that requires me to Shut Down. (If possible, I want to see if the problem is with the HP software, or with Tiger on my G4.)
However, before I can get even get to trouble-shooting the HP Photosmart, the G4 gives me that computer clock error upon re-boot. In the past, the Date & Time error message has appeared upon a cold reboot, no matter whether I had reset the Date & Time in the preference pane via the Network clock or manually. However, I never conducted my tests in conjunction with disconnecting the A/C power cable. So, I decided to try the the test you suggested. Here are my observations and the results of the test.
1) Upon Shut Down, cool down, and restart, I get the computer clock error message mentioned at the beginning of my original post, telling me that my clock is set to a earlier date.
2) When I open the Date & Time preferences pane, however, the date and time shown there (as well as on the Finder's menu bar) is current.
3) The Network setting was ON, so, to comply with this test, I unchecked the "Set date & time automatically" box. I do not need to reset date and time manually, because, as I mentioned they ARE set correctly, even though the message I got upon restart said that they are not. (If memory serves me correctly, though, the Date & Time panel would actually show 12/31/69 as the computer clock's read-out, so this discrepancy is somehow connected to this problem. )
4) I shut down the G4 for 2 hours, and I disconnected all cables and plugs to it, including A/C power.
5) Upon reboot after re-connection and re-start, the Date & Time shows...
a) in the Date & Time pane: 12/31/1969 at 7:00 PM, and counting
b) in the Finder's menu bar: 7:00 PM, and counting.
6) I take screen captures of the error message and the menu bar: both .PNG files are time-stamped as of 12/31/1969 at around 7:01 PM.
7) I will now reset the clock to the current Date and Time by turning the Network time feature back on, so I can get on with my work while the trouble-shooting process continues.
What do the results of this test tell you? Is this a software or a hardware problem?
If it's a software problem, then should I do I clean install of Tiger? If I do that, is there any evidence that a clean install will do any good to eradicate the problem?
On the other hand, if this is a hardware issue, is it contained to merely being an irritant that I can fix merely by adjusting the Date & Time whenever the problem occurs (which I can live with, as long as the system is stable after that fix), or is this error message regarding a sign of something more ominous failing on the motherboard?
bowlerboy -
Hello,
I'm trying to get my 2008 R2 server (physical server) to synch with an external time server. I've read other threads on the topic but have not found a solution. I'm sure i'm missing something.
First the step leading to the error:
w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.
Following is the history:
Here are the steps
C:\>netdom /query fsmo
Schema master DC-01.coastal.local
Domain naming master DC-01.coastal.local
PDC DC-01.coastal.local
RID pool manager DC-01.coastal.local
Infrastructure master DC-01.coastal.local
The command completed successfully.
next:
w32tm /config /manualpeerlist:time.nist.gov,0x1 /syncfromflags:manual /reliable:yes /update
The command completed successfully.
next:
net stop w32time && net start w32time
The Windows Time service is stopping.
The Windows Time service was stopped successfully.
The Windows Time service is starting.
The Windows Time service was started successfully.
Next:
w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.
Next:
Did a restart of the server and repeated:
w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.
Next:
Ran the following:
w32tm /query /configuration
C:\>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Policy)
AnnounceFlags: 10 (Policy)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Policy)
MaxPollInterval: 10 (Policy)
MaxNegPhaseCorrection: 172800 (Policy)
MaxPosPhaseCorrection: 172800 (Policy)
MaxAllowedPhaseOffset: 300 (Policy)
FrequencyCorrectRate: 4 (Policy)
PollAdjustFactor: 5 (Policy)
LargePhaseOffset: 50000000 (Policy)
SpikeWatchPeriod: 900 (Policy)
LocalClockDispersion: 10 (Policy)
HoldPeriod: 5 (Policy)
PhaseCorrectRate: 1 (Policy)
UpdateInterval: 100 (Policy)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
CrossSiteSyncFlags: 2 (Policy)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NT5DS (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Any feedback/guidance appreciated!!Hi,
You may need to update command w32tm /config /syncfromflags:domhier /update, to change the IntranetServer w32time type to nt5ds (this sets the service to pull from the AD).
For more detailed information, please refer to the thread below:
The computer did not resync because no time data was available (w32tm)
http://social.technet.microsoft.com/Forums/windowsserver/en-US/127e7fe7-6fff-469d-8536-8da1c9825cb0/the-computer-did-not-resync-because-no-time-data-was-available-w32tm
You could refer to the article below to configure time in Active Directory:
“It’s Simple!” – Time Configuration in Active Directory
http://blogs.technet.com/b/nepapfe/archive/2013/03/01/it-s-simple-time-configuration-in-active-directory.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Using home share, I can import some songs from my son's computer but not others. All the songs were purchased with the same apple id. Err msg:"There was a problem downloading ... You do not have enouggh access privileges for this operation. Please check that the connection to the network is active and try again." The network appears to be fine . I can import other songs from his library. The same songs cause me a problem each time I try. My husband had no trouble importing the same songs I have trouble with. I get the same error message if I try to import the same songs from my husbands computer as well. "Command I" appears to show the same protections on both the songs I can import & the ones I cannot. My husband and son are both running OS 10.6, while I am running 10.7. I think I had this problem even before I upgraded, but I am not certain.
x0SiN0x:
Welcome to Apple Discussions..
My first suggestion is to Repair Disk. Here's how:
Insert Installer disk and Restart, holding down the "C" key.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please post back and let me know how that goes.
Here are a few links that may help you to identify the issues:
Resolving Disk, Permission, and Cache Corruption
Tuning Mac OS X Performance
Mac OS X System Maintenance
Please don't hesitate to post back should you have further questions or comments, or with update.
Good luck.
cornelius -
IPod Touch 4th Gen iOS5 not synching on 64-Bit Windows 7 computer
I've been plagued with this problem ever since the iOS 5 update. To begin with I could not update to iOS5 with my main computer(Windows7 64-Bit) at ALL(the update would stop making progress when attempting to backup). I was having the same problem that many people on here have had anddecided to try updating with my auxiliary computer(running Windows XP) and Ifinally had iOS 5! After I updated my iPod, I had hoped that the synching issueI had been having would have resolved itself but that was not the case. After Irealized that it wouldn't sync with my main computer I decided to sync it withmy old computer and restore it to factory default settings and then do the"initial sync" and restore from my backup on my main computer.Finally I was getting my media from my main computer onto my iPod running iOS5,I thought this was fantastic and you can't imagine how happy this made me aftera month of dealing with this irritation. However, to my dismay, I came hometonight only to find that when I try to synch my iPod to my main computer itattempts to synch and then freezes in the second step of the synch while tryingto back up, just like it had when I was trying to update to iOS5. This has really caused way too much trouble for me and I've spent way too much time andeffort trying to remedy this problem.
- As asked for the versions since many users think that have the "latest" when they do not have the latest version/
- Q4: I said no that the iPod Touch 4G does not show up in iTunes/My Computer in my post. Please My question read my post.
My queston is does your iPod show up in iTunes when you conenct the iPod to another computer.
"If you connect the 4G iPod to another computer does it show in iTunes/My Computer?"
If no:
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My new iPhone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete the email on my phone and vice versa. Is there any way to get a true synch?.
POP does not support synchronization between the server and clients. You will need to use IMAP or Exchange Active Sync if your email provider supports it.
-
Hey i have my iphone is not synching with itune, how can i solve this problem..
Hey my iphone is not synching with itune, how can i solve this problem?
It can sync with a 32-bit, so long as you have the correct version of iTunes installed. I'm assuming that you are referring to a Windows based computer, so check out this support document regarding the device not being recognized by Windows. http://support.apple.com/kb/TS1538
Maybe you are looking for
-
Default page size settings in TEXT FILES SAVED FROM MAIL
I regularly save emails as rtf files (either with or without attachments) and sometimes return to print them with TextEdit. I'm in Ireland, where our standard paper size is as most European countries, i.e. A4. My 'Default Paper Size in Page Setup' is
-
How to implement Google Analytics in iRecruitment version 11.5.10
Hi We have a requirement to implment google analytics in iRecruitment. Cany you please let me know the steps to do so. thanks srimathi
-
JadClipse & jad - (Loaded now how to get it to work)
I have downloaded JadClipse and 'jad' tp decompile .class files into java text files. using my eclipse editor. I have followed all the instructions to implement this feature. I have set the JAD_HOME and path of 'jad'. When I try to open the .class fi
-
Displaying Static Variable in Title view.
Hi, I have defined a static variable bank with the value of 'Bank of India' in 10g and have to mention it in the title. How to define the variable in the title. valueof("bank"), @{biserver.variables["bank"]}, @{"bank"} don't work, then how to achieve
-
HI Experts, I have a problem. I have uploaded the file in csv format using Open dataset. But they want in csv tab delimited format. I really dont understand how to do in this format. I know only csv (the file will be separated by ',') and if tab deli