Problem connecting 3250 to a pc through pc suit

from last couple of weeks i am having problems when i try to connect my nokia 3250 to a pc through nokia pc suit (using cable)
as soon as i connect my mobile it gives a error which says
app.closed
nsmijobthread-93
211c19
any suggestions
regards
Tanveer
Message Edited by celandine on 28-Nov-2008 11:50 AM

yes i have the right usb. it came with my nokia 3250. pc suite mobile only gives error when i try to refresh messages in pc suit

Similar Messages

Hi I am having problem connecting my mac and iphone6 through AirDrop

HI I am having problem connecting my mac and iphone6 through Air Drop

You don't give any information about your Mac but note the quote below which states that it must be a 2012 or later model with Yosemite installed. The quote is from Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support which also contains some other things that may help.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.

Problems connecting powerbook to ipod touch through wifi

Hi,
I searched for previous posts but couldn't find a solutuion. I have been using the high speed internet from my powerbook to connect to my iPod Touch through wifi to be able to use the internet on my ipod close to my computer.
I have been using the advise of "mrtotes" on another apple discussion. I copied the URL and the part of the discussion that I use.
http://discussions.apple.com/thread.jspa?threadID=1240824
"Hello and Welcome to Apple Discussions,
OS X's IP firewall is probably blocking incoming Port 80 requests (i.e. web traffic).
Go to  menu > System Preferences... > Sharing > and under Services check "Web Sharing".
I assume you already have switched on Internet Sharing on the Internet section under Services on the Sharing pane and are "Sharing your connection from": "Built-in Ethernet". To computers using "Airport".
To secure the connection (recommended) go to  menu > System Preferences... > Sharing > Internet section. Click on "Airport Options..." and check "Enable encryption (using WEP)". Then enter a password twice. Users will need to enter this password to share your connection, although you should be aware even 128bit WEP isn't all that secure.
cheers
mrtotes"
I have been using these instructions successfully to connect my ipod to my powerbook for several months but now it has stopped working. When I get to System preferences>sharing>interenet and I select "Share yur connection from: Built-in ethernet", the only opions I have for "To computers using:_______" are "Built-in Ethernet" and "buildt-in Firewire" nothing about airport. Also at the bottom of the sharing window the "Airport Options" is greyed out and I can't select it. So I went to system preferences>network and my airport is listed but "Airport is currently off" So I click "Connect..." and the "Internet connect" window opens to the "airport" tab. "Airport Power: Off" and everything is greyed out so I can't select anything. And at the bottom of the window. "Status: No Airport Hardware found". So I went to the system profiler clicked on "network" on the left hand side, then clicked on "Airport" at the top right under "active services" and then looked a the information on the lower right side of the window:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Strangely, If instead of clicking on "Network" on the left side, I open up the drop down list under "network" (i.e. Airport card, firewiall, locations, modems, volumes) and click on "airport Card", I'm told "no information found"
Any solutions?
I am using:
30GB iPod Touch (5GB free) - software version 1.1.5
iTunes 7.7 (43)
Mac OS X 10.4.11
1.67 Ghz PowerPC G4 (15GB free on my 100GB drive)
1GB DDR SDRAM
750 GB Lacie external drive (200GB free)

optoma dv-10 and DVI are not compatible VGA works fine exchanged it for something else

Problems connecting to sync my N8 with ovi suite

I really need urgent help on this , I installed the ovi suite 3.0 and when I try to sync my phone it tells me to change the USB mode to Nokia Ovi suite and I do it , actually it also selects automatically but I hit again sync and it gives me again the message that I need to select the USB Nokia ovi suite .
What can be wrong ? Do I need to re install the ovi suite , do something to my N8 settings , please help , I really need to sync my info.
Regards
Attachments:
SYNC PROBLEMS.docx ‏244 KB

Ia ma lso having the same problem. I have tried posting in another thread quite a while ago about this and I have also emailed Nokia about this but I have still not had a solution. Even the most recent update hasn't helped.
I have tried uninstalling and reinstalling Ovi Suite and ALL Nokia products on my computer but this hasn't helped.

Problems connecting to remote host via DreamWeaver's FTP

I am having problems connecting to my remote host through DreamWeaver. I can connect via File Zilla Client and could connect before my hard drive crashed. Now w/new hard drive, I recieve an error msg. I tried to create a new site, which connets when I test the connection, but when I go to view the files, a dialog box appears saying "cannont get remote folder info, access denied, etc) I tried selecting different settings and combinats of the following settings:Use firewall, secure ftp, passive ftp. Not sure what else to try at this point. I have WIN XP, Adobe Creative Suite CS3. I would appreciate any help, thanks!

Sigh, it worked for a few days then started acting up again...would connect every other time, now not at all. FileZilla can't connect now either. I have not changed any of the settings - I just get a msg about a "critical error, unable to connect" in FileZilla and an "an ftp error occured, cannot make connection to host. your login or password is incorrect. please check the info and try again" msg in DreamWeaver. I have rebooted my pc, double & triple checked the spelling of my host name, login, and password. The only thing I've done is downloaded a plug-in for Photoshop to covert an image to a .ico. Unless going back and forth b/t DreamWeaver's ftp and FileZilla's would mess it up. I also tried using the alt. host with no success. I can, however, still connect using Yahoo's Web Hosting client....I don't know, sorry to keep bothering you, just very frusterated right now. Been messing with it for two days now....
Thanks.

Problems connecting to internet through airport extreme

Hi everyone I am tyring to connect to the internet. I have Charter Digital at the highest speed. When I connect directly through the cable modem using DHCP i can connect to the internet just fine, but when I use the Airport using assing multiple IP addresses i cannot get the internet. When I run diagonostics, Everything works fine up to ISP after that (internet, Server) cannot connect. I've read through the boards and found nothing, so I could really use some help. I have the CAT 5 cable from the modem going to the WAN plug in the Airport.
Thanks for any help you can give

Thank you - some of the materials linked to that may have helped isolate my problem. Unfortunately, nothing's solved it yet. Pinging the Apple IP address gives me: No route to Host, with 100% packet loss on all attempts. I'm using an Airport Express card in a 1GHz G4 eMac running OSX 10.3.9, trying to connect to a Linksys BEFCMUH4 wireless broadband gateway modem/router. As stated above, all 4 ethernet ports are functioning correctly. All initial diagnostics on my end show there's a connection. Further diagnostics and attempts to get online show a lack of a connection but don't give any detail as to where it's encountering difficulty (or, if a traceroute shows something I'm not qualified to decipher it). It's even told me it's unable to configure succesfully. I've made sure the router itself is configured so there is no password necessary (it checks for an automatically logged number from my computer) and it shouldn't be locking me out from there (I hope). I was told running Airport Express with a non-Airport wireless router would be fine, but is it possible I was misinformed? The setup procedures available to help facilitate this all assume there's an Apple AirPort to search for and don't turn up my current router when they scan, leaving me with nothing to select from in that stage of the setup, and thus I cannot proceed. Am I doomed? Are there any gracious, exceedingly capable souls out there with the time and expertise to assist me? I'll be very grateful if someone can get me past this hurdle (I need to go wireless so I can get my air conditioner installed).

I have a problem connecting my Nokia 3250 to my co...

ok, heres the thing. I have a nokia 3250 phone. I tried connecting it to the computer with the usb cable, but there is a problem. it detects the phone and even shows up in pc suite. for like 5 seconds. then it detects sumthing else and a windows baloon pops up saying "Nokia Device Bus connected in non-compatible mode. Change it from UI" and then whr it says "nokia 3250 connected" on pc suite...it says multiple phones connected. Also, before, when I used to actually use this phone alot..i used to connect it to the computer and use it as a modem and use my service providers internet on my computer..but now it says "no modems found" when i try to connect. another problem is, when ever i start pc suite...it asks me to connect to the internet before it can run...and if i cancel that, pc suite crashes. please advice me on this one. thanks.
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United States)
Input language: English (United States)
Nokia PC Suite:
Version 6.80.21
Language: English

23-Sep-2008 08:17 PM
fishergimp wrote:
but I don't want to waste money if its a phone setting issue
Hi fishergimp
It is a phone UI issue that you are currently having as answered in your other post but repeated here:
Select Menu> Connect. > Data cbl.. Select what the USB data cable connection is used for: Media player, PC Suite, or Data transfer. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection.
For Data transfer and Media player connections the phone is in the offline mode, and no incoming or outgoing calls are possible.
After transferring data, ensure that it is safe to unplug the USB data cable from the PC.
Happy to have helped forum in a small way with a Support Ratio = 37.0

We are on holiday in Mexico. Our iPad has no problem connecting to the Internet through a subscription WiFi network. But, both of our laptops can not with the same password. What can we try?

We are on holiday in Mexico. Our iPad2 has no problem connecting to the Internet through our hotel's subscription WiFi network. But, both of our macbookpros can not with the same password. What can we try?
We can join the network, but can not access the Internet. The password is correct. We have tried network assistant and diagnostics, restarting the laptops, re-joining the network. Our iPhone 4s also works all the time.
Same location. Signal strength is good.

Since I couldn't figure out a way to edit our original post, here's another potential clue.
Our laptops, when in System Preferences>Network, say "WiFi has the self-assigned IP address of XXXXXXXXX and will not be able to connect to the Internet".
Strangely, my six year old MBP running OS 10.6.8 accessed the Internet straight away, just by opening Safari to my home page. My wife's six month old MBP running OS 10.7.2 could not.

Why wont my netflix connect to HD TV through chromecast. No problem connecting youtube from apple mini ipad

My apple mini ipad will connect you tube to my HD TV through chromecast. Why won't my netflix on my mini ipad connect to my HD TV through chromecast?

Could you specify what brand, model, and ports the TV has?
Perhaps the maker of the digital TV has customer support.
Unless that's part of the issue, a general lack of it there, too.
However remote that may be, a few have a web page with
pictures of the back or end of their product with ports in view.
And/or a schematic of the kinds of gremlins they have inside.
Was your MB/Pro a certified Apple Store refurbished 'special deal' or bought at a retail store from existing stock that may have been an older model?
In either case, the ability to return the item has a limited duration from the date of purchase; unless there is a technical issue whereby they may choose to repair or replace a failed component or device. Perhaps someone with more experience with the device and adapters will offer their take on what to attempt next.
Sorry you've had so much trouble...
Good luck in any event.

I have money on account at iTunes. I cannot access it through my games, especially The Hobbit game. It give me an error messages saying there is a problem connecting to iTunes account. I have changed my password now and I still cannot get into the account

I have money on my iTunes account. I cannot purchase premiums for the games I play! Especially the Hobbit Middle Earth game. I get an error message saying there is a problem connecting to my iTunes account. I have changed my password and still cannot use the account. I purchase my iTunes and App cards at Food Lion and Walmart and don't use a credit card. Can anyone help?

Try loging out of and back into your AppleId: (Settings app > iTunes&App Stores > [tap on your account] > Sign out. Then sign back in.
Contact iTunes support: http://www.apple.com/support/itunes/contact/

Problem connecting to ISP through AE Modem

So far, I been able to set up a wireless network in my home using an AirPort Extreme Base Station, but I'm unable to connect to an ISP via a dial-up connection through Airport's built-in modem.
Airport on my MacBook is on and attempts to connect, but, after several attempts, it notes that my password and/or username are invalid--despite reentering them several times in Airport Utility. I am using a MacBook, Airport Extreme, and AT&T Worldnet® as my ISP. I am connected to the internet now through Worldnet and my Indigo iMac. I've double checked my configurations--why can't I connect?
Thanks in advance.
Andrew L.

Crawling under a rock... I incorrectly typed my password--caps lock mistake, oops.
Andrew L.

"There was a problem connecting to the server" in iTunes after migrating to new mac

I have a problem that is driving me crazy with my brand new iMac. I see many other people posting similar issues, but none of the other solutions seem to work for me.
I had a MacPro and bought a new iMac, on which I used Migration Assistant to set up. So the new iMac is virtually the same as my old machine in terms of appearance and installed applications. Both machines have Mountain Lion 10.8.2. All software on both machines has been through Software Update and is fully up to date, as are the connected devices (iPhone and iPad).
The problem is with iTunes. Every time I start iTunes (I think at the moment it checks my two connected devices) I get a pop up dialogue saying:
There was a problem connecting to the server "MacPro".
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
This dialogue continues to pop up constantly as long as iTunes is open, interrupting my work and frustrating me no end. The old machine is of course turned off and indeed is not available -- but I can't find what on the new iMac is so desperate to connect to it.
So far I have tried completing erasing my iTunes library, deleting all the preferences, reinstalling iTunes from a fresh download of the dmg, safe rebooting several times with no peripherals connected at all, and deleteing other preferences like the Login Items, iPhone config and iPhoto. I have also cleared Recent Items from the apple menu and opened "Connect to Server" in the finder and cleared all servers from the dropdown menu.
Last night I also completely restored my iPhone from scratch to see if that would clear away the issue and I have connected both iPhone and iPad to go through any apps that have permission to write content to my computer and deleted all of them completely from the devices.
Nothing has changed at all after all that, and I have run out of ideas. Clearly there is something somewhere that has my old machine's name hard coded in it but I can't see any way to search for it. I would grep my Library folder but I think a lot of the files are binary so I'm not sure that would unearth anything. I've seen many posts saying that Apple phone support (which I would qualify for) can't help with this issue and so I have put off phoning them to simply run through all the things I've already tried.
Any advice that anyone could offer would be extremely helpful. I can't use iTunes at all like this as it disrupts everything I try to do on the new machine.
many thanks!!

Nothing at all? Can't anyone help with this issue at all? I would be grateful for any suggstions as it is driving me crazy. It happens every time I open iTunes and also every time I open Mail.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

On submit button type - There was a problem connecting to the server.

Hi,
Please give me a solution for server connection issue. I am new to the adobe live cycle designer ES4.
I created a web form use of adobe live cycle es4 v.11.0 to retrieve the data from web service method. So, I created the WSDL type data connection in data view menu to invoke the .asmx?wsdl service and connection is established successfully. Then, I dragged and drop a button from object library window to invoke the service method and changed the type as submit button. In the submit button URL, I given the web service url as eg. http://<localhost>:<port>/Web_serive.asmx?wsdl. Finally, I saved it has a PDF file.
When I click the submit button, a pop up window is openning as 'preparing for submit..' and 'Receving data..' and finally, it shows a pop up error message as 'An error occured during the submit process. There was a problem connecting to the server'. I tried all possiblities and if any bad english grammer, sorry for that.
Please give me a proper solution for this issue.
With Regards,
G. Prabakaran.

After trying these suggested actions several times success has not been reached.
I understand you are getting unable to connect to server error message on your printer. I would first unplug router and printer for about 1 minute. I would plug router up first then printer. I would then try to enable web services. If not successful and you get same error message. I would follow these steps.
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.
8. Try again to access ePrint.
Let me know how it goes.
I am able to print wirelessly to the printer, print through eprint, scan, and copy things. The only thing that is not working is the printer itself connecting to the hpeprintcenter.com.
Kyle

Problem while access database by JSTL through JSP.

I am trying to connect database by using JSTL through jsp.I am getting an exception.Please advise.
Error:
org.apache.jasper.JasperException: XML parsing error on file /WEB-INF/jsp/c.tld: (line 2, col 8): Document is invalid: no grammar found.
     at org.apache.jasper.xmlparser.ParserUtils.parseXMLDocument(ParserUtils.java:140)
     at org.apache.jasper.compiler.TagLibraryInfoImpl.parseTLD(TagLibraryInfoImpl.java:200)
     at org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:140)
     at org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:309)
     at org.apache.jasper.compiler.Parser.parseDirective(Parser.java:336)
     at org.apache.jasper.compiler.Parser.parseElements(Parser.java:750)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:77)
     at org.apache.jasper.compiler.ParserController.parse(ParserController.java:157)
     at org.apache.jasper.compiler.ParserController.parse(ParserController.java:111)
     at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:183)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:327)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:427)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:142)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:144)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:445)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2358)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:133)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:127)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
JSP:
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jstl/fmt" %>
<sql:setDataSource scope="application"
driver="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:oracle:thin:@3.173.130.12:1521:cup"
user="sUerName"
password="sPassword"
/>
<sql:query var="Result">
select * from imtinv.imi_error_message
</sql:query>
<html>
<head>
<title>
Error Message Details
</title>
</head>
<body bgcolor="white">
This is the information stored in the Error Message Table in Depot Automation Systems
<table>
<c:forEach items="$(Result.rows)" var="row">
<c:forEach items="$(rows)" var="column">
<tr>
<td align=right>
<b><c:out value="$(column.key)" />:</b>
</td>
<td>
<c:out value="$(column.value)" />:</b>
</td>
</tr>
</c:forEach>
</c:forEach>
</table>
</body>
</html>
Web.xml:
<taglib>
<taglib-uri>
http://java.sun.com/jstl/xml
</taglib-uri>
<taglib-location>
/WEB-INF/jsp/x.tld
</taglib-location>
</taglib>
<taglib>
<taglib-uri>
http://java.sun.com/jstl/fmt
</taglib-uri>
<taglib-location>
/WEB-INF/jsp/fmt.tld
</taglib-location>
</taglib>
<taglib>
<taglib-uri>
http://java.sun.com/jstl/sql
</taglib-uri>
<taglib-location>
/WEB-INF/jsp/sql.tld
</taglib-location>
</taglib>
c.tld:
<?xml version="1.0" encoding="UTF-8" ?>
<taglib xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee web-jsptaglibrary_2_0.xsd"
version="2.0">
<description>JSTL 1.1 core library</description>
<display-name>JSTL core</display-name>
<tlib-version>1.1</tlib-version>
<short-name>c</short-name>
<uri>http://java.sun.com/jsp/jstl/core</uri>
<validator>
<description>
Provides core validation features for JSTL tags.
</description>
<validator-class>
org.apache.taglibs.standard.tlv.JstlCoreTLV
</validator-class>
</validator>
<tag>
<description>
Catches any Throwable that occurs in its body and optionally
exposes it.
</description>
<name>catch</name>
<tag-class>org.apache.taglibs.standard.tag.common.core.CatchTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
Name of the exported scoped variable for the
exception thrown from a nested action. The type of the
scoped variable is the type of the exception thrown.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Simple conditional tag that establishes a context for
mutually exclusive conditional operations, marked by
<when> and <otherwise>
</description>
<name>choose</name>
<tag-class>org.apache.taglibs.standard.tag.common.core.ChooseTag</tag-class>
<body-content>JSP</body-content>
</tag>
<tag>
<description>
Simple conditional tag, which evalutes its body if the
supplied condition is true and optionally exposes a Boolean
scripting variable representing the evaluation of this condition
</description>
<name>if</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.IfTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
The test condition that determines whether or
not the body content should be processed.
</description>
<name>test</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
<type>boolean</type>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
resulting value of the test condition. The type
of the scoped variable is Boolean.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Scope for var.
</description>
<name>scope</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Retrieves an absolute or relative URL and exposes its contents
to either the page, a String in 'var', or a Reader in 'varReader'.
</description>
<name>import</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.ImportTag</tag-class>
<tei-class>org.apache.taglibs.standard.tei.ImportTEI</tei-class>
<body-content>JSP</body-content>
<attribute>
<description>
The URL of the resource to import.
</description>
<name>url</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
resource's content. The type of the scoped
variable is String.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Scope for var.
</description>
<name>scope</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
resource's content. The type of the scoped
variable is Reader.
</description>
<name>varReader</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the context when accessing a relative
URL resource that belongs to a foreign
context.
</description>
<name>context</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Character encoding of the content at the input
resource.
</description>
<name>charEncoding</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
The basic iteration tag, accepting many different
collection types and supporting subsetting and other
functionality
</description>
<name>forEach</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.ForEachTag</tag-class>
<tei-class>org.apache.taglibs.standard.tei.ForEachTEI</tei-class>
<body-content>JSP</body-content>
<attribute>
<description>
Collection of items to iterate over.
</description>
<name>items</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>java.lang.Object</type>
</attribute>
<attribute>
<description>
If items specified:
Iteration begins at the item located at the
specified index. First item of the collection has
index 0.
If items not specified:
Iteration begins with index set at the value
specified.
</description>
<name>begin</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>int</type>
</attribute>
<attribute>
<description>
If items specified:
Iteration ends at the item located at the
specified index (inclusive).
If items not specified:
Iteration ends when index reaches the value
specified.
</description>
<name>end</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>int</type>
</attribute>
<attribute>
<description>
Iteration will only process every step items of
the collection, starting with the first one.
</description>
<name>step</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>int</type>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
current item of the iteration. This scoped
variable has nested visibility. Its type depends
on the object of the underlying collection.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
status of the iteration. Object exported is of type
javax.servlet.jsp.jstl.core.LoopTagStatus. This scoped variable has nested
visibility.
</description>
<name>varStatus</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Iterates over tokens, separated by the supplied delimeters
</description>
<name>forTokens</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.ForTokensTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
String of tokens to iterate over.
</description>
<name>items</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
<type>java.lang.String</type>
</attribute>
<attribute>
<description>
The set of delimiters (the characters that
separate the tokens in the string).
</description>
<name>delims</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
<type>java.lang.String</type>
</attribute>
<attribute>
<description>
Iteration begins at the token located at the
specified index. First token has index 0.
</description>
<name>begin</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>int</type>
</attribute>
<attribute>
<description>
Iteration ends at the token located at the
specified index (inclusive).
</description>
<name>end</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>int</type>
</attribute>
<attribute>
<description>
Iteration will only process every step tokens
of the string, starting with the first one.
</description>
<name>step</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>int</type>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
current item of the iteration. This scoped
variable has nested visibility.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the exported scoped variable for the
status of the iteration. Object exported is of
type
javax.servlet.jsp.jstl.core.LoopTag
Status. This scoped variable has nested
visibility.
</description>
<name>varStatus</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Like <%= ... >, but for expressions.
</description>
<name>out</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.OutTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
Expression to be evaluated.
</description>
<name>value</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Default value if the resulting value is null.
</description>
<name>default</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Determines whether characters <,>,&,'," in the
resulting string should be converted to their
corresponding character entity codes. Default value is
true.
</description>
<name>escapeXml</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Subtag of <choose> that follows <when> tags
and runs only if all of the prior conditions evaluated to
'false'
</description>
<name>otherwise</name>
<tag-class>org.apache.taglibs.standard.tag.common.core.OtherwiseTag</tag-class>
<body-content>JSP</body-content>
</tag>
<tag>
<description>
Adds a parameter to a containing 'import' tag's URL.
</description>
<name>param</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.ParamTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
Name of the query string parameter.
</description>
<name>name</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Value of the parameter.
</description>
<name>value</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Redirects to a new URL.
</description>
<name>redirect</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.RedirectTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
The URL of the resource to redirect to.
</description>
<name>url</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the context when redirecting to a relative URL
resource that belongs to a foreign context.
</description>
<name>context</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Removes a scoped variable (from a particular scope, if specified).
</description>
<name>remove</name>
<tag-class>org.apache.taglibs.standard.tag.common.core.RemoveTag</tag-class>
<body-content>empty</body-content>
<attribute>
<description>
Name of the scoped variable to be removed.
</description>
<name>var</name>
<required>true</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Scope for var.
</description>
<name>scope</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Sets the result of an expression evaluation in a 'scope'
</description>
<name>set</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.SetTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
Name of the exported scoped variable to hold the value
specified in the action. The type of the scoped variable is
whatever type the value expression evaluates to.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Expression to be evaluated.
</description>
<name>value</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Target object whose property will be set. Must evaluate to
a JavaBeans object with setter property property, or to a
java.util.Map object.
</description>
<name>target</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the property to be set in the target object.
</description>
<name>property</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Scope for var.
</description>
<name>scope</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Creates a URL with optional query parameters.
</description>
<name>url</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.UrlTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
Name of the exported scoped variable for the
processed url. The type of the scoped variable is
String.
</description>
<name>var</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
Scope for var.
</description>
<name>scope</name>
<required>false</required>
<rtexprvalue>false</rtexprvalue>
</attribute>
<attribute>
<description>
URL to be processed.
</description>
<name>value</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<description>
Name of the context when specifying a relative URL
resource that belongs to a foreign context.
</description>
<name>context</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
<tag>
<description>
Subtag of <choose> that includes its body if its
condition evalutes to 'true'
</description>
<name>when</name>
<tag-class>org.apache.taglibs.standard.tag.rt.core.WhenTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<description>
The test condition that determines whether or not the
body content should be processed.
</description>
<name>test</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
<type>boolean</type>
</attribute>
</tag>
</taglib>
Thanks and Regards,
Velrajan T.

For installing JSTL, all you need are the jar files in the web-inf/lib directory.
- No entries in web.xml
- no tld files lying around
- no problems!
I think you may have a versioning problem here.
What version of Tomcat are you using?
With JSP1.2 (eg Tomcat 4), you should be using JSTL1.0. <%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
With JSP2.0 (eg Tomcat 5), you should use JSTL1.1. <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
Note the difference in the URIs. - the second one includes a /jsp
Currently you are using the URI for JSTL1.0, but you look to have the tld from JSTL1.1. If you are using a JSP1.2 container, I don't think it could read this tld file, hence the error.
Try installing the correct version of JSTL, properly (ie as they tell you in the readme file) and it should all work.
Cheers,
evnafets

Problem connecting 3250 to a pc through pc suit

Similar Messages

Maybe you are looking for