Problem Connecting Philips Pegoda Reader

Hi,
This is in reference to my earlier post, listed below.
I figured out that the tclpcd32.dll is present in the MifareWnd Application Installation directory, so I added this location in the environment Path Variable.
After this when I restarted eclipse, I get the following message box:
"javaw.exe - Entry Point Not Found.
The procedure entry point _PcdTransTmrGetCurrent@4 could not be located in the dynamic link library MfGeneric.dll"
Please guide. What should I do to get this reader running smoothly with JCOP 3.1.1b.
**************************EARLIER POST**********************
Hello,
I have just installed JCOP Tools v3.1.1b on Eclipse v3.1.1.
I have a Philips Pegoda Reader MF RD 700. And a JCOP Engineering Sample Card JCOP v2.2 41.
My problem is that when I try to select the Philips Pegoda Reader on "Connect" button of JCOP Shell, I get a message box which says -
"javaw.exe - Unable to locate Component"... ..."tclpcd32.dll was not found..."
Where can I find tclpcd32.dll ?? What does this dll do?? Do I need to add something to Eclipse Classpath??
I am new to JavaCard development.
Please help !!

hello,
Can you please tell me where you purchased your card and the Philips Pegoda Reader. I urgently need to activate my toolkit. Looking forward to your reply

Similar Messages

Pegoda reader or card problem

Hi I am using Eclipse 32. with JCOP plugin and philips pegoda reader.
Still now I was using JCOPV4 cards all thing working fine, but I have got JCOPV3 cards and in that I am frequently getting error on /card that
Communication problems: T=CL communication error: T=CL: Transmission error. Failed to halt PICCI dont understand what is problem with JCOP3 cards. I have to keep /card to get it done, I am sending you some stack so you may have idea what is the problem - (Inconsistency). Please let me know if anyone have any clue for this.
cm> /terminal "tcl:10"
--Opening terminal
/card--Waiting for card...
jcshell: Error code: -6 (Card terminal error)
jcshell: Communication problems: T=CL activation failed: T=CL error message: Reader: No Card in RF-Field (-1)
/card--Waiting for card...
jcshell: Error code: -6 (Card terminal error)
jcshell: Communication problems: T=CL activation failed: T=CL error message: Reader: No Card in RF-Field (-1)
/card--Waiting for card...
jcshell: Error code: -6 (Card terminal error)
jcshell: Communication problems: T=CL activation failed: T=CL error message: Reader: No Card in RF-Field (-1)
/card--Waiting for card...
ATS=0A 38 77 B1 4A 43 4F 50 33 30                      .8w.JCOP30
ATS: FSC=256, DS=1,2,4,8/DR=1,2,4,8, FWI=11 (FWT=0.618 sec), SFGI=1, Hist="JCOP30"
=> 00 A4 04 00 07 A0 00 00 00 03 00 00 00             .............
(16536 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E    o..............n
    06 40 51 30 85 30 1A 9F 65 01 FF 90 00             [email protected]....
Status: No Error
cm> init-update 255
=> 80 50 00 00 08 75 22 E9 A4 50 74 D5 87 00          .P...u"..Pt...
jcshell: Error code: -6 (Card terminal error)
jcshell: Communication problems: T=CL communication error: T=CL: Transmission error. Failed to halt PICC

It's probably more a hardware problem on the reader side. The Pegoda is not an actual product, it's more a prototype that has never really matured all that much. For example, the Pegoda is known to produce weak fields. This could explain why you run into problems when crypto is used during authentication, which causes more current to be drawn by the chip. For serious contact-less applications, I'd suggest switching to a different reader manufacturer. I would recommend SCM's SDI010.

JCOP + Eclipse + pegoda reader

Hi all,
i have written one java card applet with the help of eclipse plugin of JCOP,but i don't have philips pegoda reader to test my applet.
is there any other way of testing applet without use of reader?
or any other reader is available?
Divyesh.

You should use the JCOP (or some other) JavaCard simulator. You may also use any PCSC compliant reader.
Regards,
Aleksandar

Can't connect to terminal Pegoda Reader via JCOP eclipse

Hi,
I have just installed JCOP plugin 3.2.8 under Eclipse 3.2 with the scope to connect to Pegoda MF RD 700 (Philips Smartcard Reader), But even I try to launch JCOP Debug -> Target:NXP SCComm Reader TCL, I had this message :
- /term "SCComm:2"
jcshell: Cannot init/open terminal: java.lang.RuntimeException: Open terminal failed: Failed to enable requested reader type, further info: The firmware of the CL RD70x (Pegoda) does not support this function. Update the firmware to fix it (0x80121007); (The firmware of the CL RD70x (Pegoda) does not support this function. Update the firmware to fix it (0x80121007))
- /card -a a000000003000000 -c com.ibm.jc.CardManager
jcshell: Error code: -8 (Failed (no diagnosis))
jcshell: Command failed: No ATR
Unexpected error; aborting execution
Any Idea Please ?

Hi Shane,
Thank you again :)
In the Run configuration Dialog , I have to choose between NXP SCComm Reader PSSC and NXP SCComm Reader TCL . The Pegoda External Reader correspond to the NXP SCComm Reader TCL.
I notice that when I use JCShell, I can connect to the Reader by launching command /term tcl:10 , therefore, when I launch this command from JCOP Shell (from Eclipse) I had this error
jcshell: Cannot init/open terminal: T=CL open failed - Wrong base address?
T=CL error message: HostRdCom: No overloaded function found
I will send a request to NXP for a probable firmware update.
Your suggestion was very helpful :)
Miriam

I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?

Could be that the servers are overloaded today.

Problem connecting (read only) to Sybase Server using Crystal XI

Hi,
I'm having a very similar problem to Renuha in the thread 'Problem connecting to Sybase Server using Crystal XI-Version-11.0.0.1994'
The thread is marked as assumed answered but I suspect not!
I am experiencing this issue in Crystal XI R1 11.0.0.2495, post SP4 install.
Though the issue was exactly the same pre SP4 install, when it was a vanilla install @ version 11.0.0.1282.
I am trying to connect to a Sybase database via Crystal > Start Page > Standard Report Wizard > Standard Report Creation Wizard > Sybase Server > Make New Connection
I enter the details, of my read only user account, and select my desired database, from the (successfully) populated 'Database' drop down.
After some time, in the 'Standard Report Creation Wizard' window I get the server listed under the Sybase Server branch, but, on expanding the server I only get '...no items found...'. However ,if I use the sa account, after selecting a particular database, I can see all the available database objects under the Sybase Server > [server] node.
I am on Windows XP Pro SP3, with Sybase Open Client v12.5.2
I assume my Sybase Open client is correctly installed as I am able to successfully connect using the sa account.
I am trying to connect to a Solaris 10 (5.10) system running Sybase @@version= Adaptive Server Enterprise/15.0.3/EBF 16548 ESD#1/P/Sun_svr4/OS 5.8/ase1503/268
Our database vendor/supplier has said:
"...Crystal reports is not handling the granularity of the Sybase revoke permissions and assuming we've revoked all access to any table where we have revoked only write access.
Is anyone able to assist?
Thanks,
Matt

Don,
Thanks again for the response and my apologies for the delay in reply - they keep giving me other work to do!!
Anyway.
CR XI R2 SP6 successfully installed.
Same outcome on Sybase connect, with a full read/write sa account
i.e. successfull connect and sight of all database objects within my chosen database.
Same outcome on my restricted read only account
i.e. I am able to successfully authenticate and choose which database I wish to select but subsequently, still, 'no items found' is displayed when I expand my database node.
I believe it is a problem with the read only account as both accounts are able to connect, as shown by the availablilty of the dropdown, listing the available databases within the specified Sybase instance.
The reasons for going down this path are as you suspect - I've been asked to provide access which is not full!
As far as the testing via test tbl creation.
I know very little of Sybase (?!) and all our Sybase DBA activities are carried out by our system/dB vendor/supplier.
To do further testing I would have to go back to our dB vendor/supplier but, as mentioned, (I get the impression) they already beleive they have carried out all required of them by providing locked down read only access.
I ought to mention that the database trying to be accessed is a restored copy of "the previous days" live data, on an MIS server. The read-only account comes over as with full privileges, and it is a script, subsequent to database restore, which knocks down the accounts privs, to read-only. Given this scenario what would I have to ask of them re further testing/troubleshooting?
Thanks,
Matt

I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next

I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next

Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer.

WSDL data connection problem, error attempting to read from file...

Hi, I got the exact same error messsage as described in this thread:
http://forums.adobe.com/message/3136286#3136286
I tried all the suggestions in the thread, but nothing worked.
My process is like this:
At the process initiator step, it uses form "A" (and Webservices calls work perfectly there),
the initiator fills up form "A", "Complete"s it,
and it goes to the next person, where it uses form "B",
and Webservices calls fail to work from the form "B".
However, when I replace form "A" with form "B",
that is, use form "B" at the initiator step,
the Webservices calls on form "B" work just fine.
Any idea why this happened?
thanks.

I found a solution to this. The 'DataDescription' elements in the data XML are the cause of the problem. Apparently Acrobat/Reader is not able to handle the elements from form 'A' when loading that data into form 'B'.
My solution was to modify my process to:
1.) Create an xml variable (call it 'xmlData')
2.) Create an XDP "wrapper" by setting the value of xmlData in a 'Set Value' operation. Since my top-level form element is called 'TopLevelFormElement', my "wrapper" (the value for 'xmlData') was:
deserialize('<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:dd="http://ns.adobe.com/data-description/"
xmlns:impl="http://adobe.com/idp/services" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
        <xfa:data>
            <TopLevelFormElement>
            </TopLevelFormElement>
        </xfa:data>
    </xfa:datasets>
</xdp:xdp>')
3.) Copy the form data from the original (call it 'originalXmlData') to 'xmlData' by setting this mapping in a 'Set Value' operation:
//process_data/xmlData//TopLevelFormElement = /process_data/originalXmlData//TopLevelFormElement
4.) At this point, you have a set of data (xmlData) that contains all of your form data but is free of the 'DataDescription' elements that cause problems. Pass 'xmlData' into form 'B'.
5.) Data should be processed as expected in form 'B', and web service calls should be operational.

I'm trying to set up my Ipod, but when I go to sign in with an apple ID it says 'Could not sign in: there was a problem connecting to the server'.

I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?

I also encountered the same problem. Try using a different email address or try signing in later.

I am having problems connecting to home wifi. It was working, but now all I get is a blank white screen. I re-booted with no success.

I am having problems connecting to home wifi. It was working, but now all I get is a blank white screen. I re-booted with no success.

Hi, blank white screen where exactly?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Problems connecting multiple macs to an Airport Extreme network.

I think this problem is similar to a previous post, but is individual in some ways.
I have 2 Airport Extreme basestations covering a large flat connected by Ethernet extending a single network. I did try to extend the network wirelessly, but this was plagued with problems where the network would work for 10 mins, then drop out as I think the basestations are slightly too far apart.
Connected to the network are a number of machines:
Wirelessly we have 3x iPhones, 1x G4 Cube, 1x iMac (current model), 2x MacBook Pro (previous model) & 1x PC.
Wired via a hub is an Apple TV, PS3, Nintendo Wii, Denon Home Cinema Amp, PS2
For aprox 6 months I have had major problems connecting all the wireless machines at the same time. I have played around with the security as per previous posts with varying degrees of success.
I seem to have the most problems with the iMac. The iMac will not join the network when there is any form of wireless security. Every time I try to set up a password it hangs when trying to join and I finally get the "There was a error joining xxxx network".
After more playing around I managed to get all the machines working by having no security on the network and locking the network down by MAC addresses.
Since last Thursday I now have a new problem. The iMac joins and stays on the network perfectly, but the second my second MacBook Pro is switched on and joins the network, the internet connection on the iMac drops out. In addition, as we use the iMac as a media server, all other machines connected to the iMac for either file sharing or iTunes sharing then get the error "the remote machine is failing to respond. Please check firewall settings if there are any". What is strange is that the iMac remains on the network, full signal, independent IP address and the second the MacBook Pro is switched off, works perfectly again.
I have tried wiping both the iMac & the MacBook Pro and re-installing their operating systems, but this only solves the problem for aprox 24 hours then all of a sudden the issue re-appears.
Can anyone out there help?

Let's double-check the AirPort Express Base Station's (AX) settings ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, check the following settings:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing AEBSn's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

Having problems connecting MacBook Pro 2010 TO vizio 60 " tv

having problems connecting MacBook Pro 2010 TO vizio 60 " tv using mini displayport to VGA adapter
non support warning appears pn tv monitor

However, I still don't get a view of anything on the desktop except for the standard Apple swirl.
Can you drag windows to the other display?
In the "Arrangement" tab of "Displays" system preference, you can drag the display pictures to match the actual arrangement, drag the menu bar to the other display, or enable mirroring.

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Problem Connecting Philips Pegoda Reader

Similar Messages

Maybe you are looking for