Problem downloading the ddl script

Hi all,
I am trying to upload a DDL script to execute it on my new apex application.
It doesn't work, I get an error, I realised that I have to copy and past the code of the creation of a table one by one.
Do you have any idea how to fix that ? to execute the ddl script at once ?
I cannot execute hundreds of queries one by one
Thank you, it is urgent

Moun wrote:
Hi all,
I am trying to upload a DDL script to execute it on my new apex application.
It doesn't work, I get an error, I realised that I have to copy and past the code of the creation of a table one by one.
Do you have any idea how to fix that ? to execute the ddl script at once ?
I cannot execute hundreds of queries one by one
Thank you, it is urgentYour problems are no more or less "urgent" than any others on this forum, and the volunteers here are free to use their time as they see fit. Making claims of "urgency" is the best way to get your question ignored.
However in this case the problem is quite simple: you have not bothered to consult the documentation. Use the SQL Workshop SQL Scripts page.

Similar Messages

  • TS3694 Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out.

    Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • Error while downgrading from ios6(beta4) to ios5.0.1.. i am getting error "there was a problem downloading the software for the iphone" any idea???

    Hi,
        I tried to downgrade my iphone4s os from ios6 (beta 4) to ios 5.0.1(factory settings).
    but all the time i am getting the following error.
    "there was a problem downloading the software for the iphone "rams's iPhone" "
    pls help me to downgrade my device.
    I am from india, ios6 maps are not at all working for india so i want to go for old version so that i can have google maps.
    Regards
    Ram

    You couldn't go back to 5.0.1 even if you wanted to, it would have to be 5.1.1 but if you had a signed copy of the iOS 6 beta on your iPhone I don't believe you can go back.
    You can try Google to see if you can find a workaround. Despite the map issue, if you are a developer don't you need the Beta on your iPhone?

  • Restore error message: "There was a problem downloading the iPod software"

    I am trying to restore my iPod and keep getting this message when I try: "There was a problem downloading the iPod software for the iPod "iPod". The requested resource was not found." HELP! What do I do next???
      Windows XP  

    Hi BigIRv,
    Actually, a "requested resource" error message (which I believe you are getting) most of the time has to do with iTunes having a problem with connecting to your iPod, rather than the iPod software update server (although a more rare possibility of this error message could occur in that sense).
    See my post here, which contains a couple of things to try if you have that error message:
    http://discussions.apple.com/thread.jspa?messageID=4741036&#4741036
    -Kylene

  • I receive the following error message when trying to download and update my software on my iPod touch and iPad - "there was a problem downloading the software for the iPad/iPod "Mikki's iPad". T

    When trying to download and update the operating system software for my iPad and iPod I get the following message - "ERROR MESSAGE" There was a problem downloading the software for the iPad "Mikki's iPad". The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again. later." Is this a setting on my computer - my network is working fine.  I didn't have any trouble before but have just started having trouble.  Please help...

    Hi Robertfrom Denver.
    Did you try the solution given, and if yes, did it work?
    I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
    I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
    HelenfromBroughton Astley

  • How to generate the DDL script of all the schema objects.

    Hi All,
    I just wanted to make centralized repository for Oracle database and to create a base version, I need to create the DDL scripts of all the database objects so that i can check in the same ddl scripts (sql) files in to my central repository.
    I need do this schedule job which will generate the ddl scripts once in a month(This should be automated process)
    Please help me out about this.
    Oracle version - 9i
    Thanks in advance.
    Thanks,
    Santosh
    Edited by: Santosh_Oracle on Feb 23, 2011 10:26 PM

    It is definitely possible to revise the script.
    Look at it, you already have 80 percent of it for free, and you didn't even need to Google.
    Just ask a FAQ in a forum loaded with FAQs!
    And Toad can save everything to one script per object.
    Sybrand Bakker
    Senior Oracle DBA

  • I am trying to download an update for my iphone, but in the middle of the download I get an error message that says, 'There was a problem downloading the software for iphone. The network connection timed out.' Any ideas on how to resolve this issue?

    I am trying to download an update to my iphone, but in the middle of the download, I get an error message that reads, 'There was problem downloading the software for the iphone. The network connection timed out'. Any idea how to reslove this issue?

    Hi Robertfrom Denver.
    Did you try the solution given, and if yes, did it work?
    I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
    I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
    HelenfromBroughton Astley

  • TS1814 "There was a problem downloading the software fot the iphone. The network connection timed out.there's no pblm with my connection but this error keeps on showing,  what to do?

    "There was a problem downloading the software fot the iphone. The network connection timed out."
    there's no pblm with my connection but this error keeps on showing, 
    what to do? please help....

    Stop with the silly and pointless fonts.
    A simple search of the forums for the actual error would have revealed the resolution.
    Temporarily disable all security software on the computer.

  • I've iPhone 4s, and I am trying to update it to iOS 5.1 I've downloaded the software from iTunes, but when I click to install it, it says: "There was a problem downloading the software for the iPhone 'Donnbjj1's IPhone'. An unknown error occurred (1480)"

    I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks

    HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks

    Yep, me to exactly the same problem,  the error message keeps telling me to check my internet connection  or try later.  Nothing wrong with my internet connection.  Is it an apple server problem?

  • There was a problem downloading the software for the iphone. An unknown error occured (-23)

    Hi,
    I cant seems to restore my iphone or even downloading the latest iOS 5 update. The error message is as per subject: "there was a problem downloading the software for the iphone. An unknown error occured (-23)"
    Anyone know how to resolve this?
    I have no issue with my network connection.
    thanks
    Alexis

    i had this problem too, check security updates, itunes update to 10.5, disable firewall and antivirus but still the same problem. Seems there is no answer to it.

  • "There was a problem downloading the software for the iPhone....An unknown error occurred (-23)." What should I do?

    "There was a problem downloading the software for the iPhone....An unknown error occurred (-23)." What should I do?

    i have the same problem:
    I have an iphone 4s and I have been trying for months to update my phone from iOS 6.1.3 to the new one.
    I recently got a new computer (my old harddrive crashed and will not work at all) and I just now copied all my music and photos to the computer.
    Now I have been trying to update to the iOS 7.1 both on iTunes and on the iPhone but neither one work. I keeps saying "unknown error" .
    I am wondering if I restore it to factory settings and then update it will the install work?
    also since i have backed up to the iCloud and my computer..will i be able to recover my music, contacts, notes and photos???
    thanks in advance.

  • Ipad ios 4.2 update error - "there was a problem downloading the software..

    Hi All -
    Super excited to get 4.2.1 up and running. I had the buggy beta of 4.2 running on my iPad but now when I try to restore my iPad to get the most recent version of 4.2.1 running, I get this error:
    "There was a problem downloading the software for the iPad. The requested resource was not found.
    I've restarted iTunes and the computer and I'm still getting the same error. I've looked for the .ipsw file online but can't seem to find it anywhere. It's not an Apple's Support/Downloads section either.
    Anyone know where to download the new update? I'm dying without Airplay, Airprint and so on not working here.
    Thanks!
    CH

    Hi,
    this should have been addressed by Apple I guess, but luckily we found out the solution in the company. Yesterday all our iPads (with 4.2 beta iOS for dev) stopped working, displayed the Connect to iTunes scrren and throw errors when trying to sync like 'The requested resource was not found' (when tried to Restore) and Error Code: 0xE800005D (when iTunes first just tried to reinstall apps).
    Here is what we did to reanimate all four iPads in the company:
    First you need to enter Recovery mode with the iPad, then recover the iOS software (probably the latest). Here is how to do it:
    1) Fire up iTunes on your computer, and plug in the USB cable in the computer, but not in the iPad!
    2) Do a hard reset, ie. press and hold down Sleep/Wake and Home buttons simultaneously, don't bother with the switch off prompt, just keep pushing the buttons.
    3) When the screen goes blank, but before the Apple logo comes up, release the Sleep/Wake button and quickly plug in the USB into the iPad too. Keep pushing the Home button, until the Recovery mode dialog in iTunes comes up.
    4) Act according to the prompts, and wait for the image to download and extract (can be 10-15 minutes depending on your internet connection, the image is some 550Mb).
    That's it, you can safely restore your apps and other content to your recovered iPad.
    Hope this helps,
    David

  • IPad update Error- There was a problem downloading the software for the iPad .... network settings

    "iPad update Error- There was a problem downloading the software for the iPad X you do not have enough access privileges for this operation. Make sure your network settings are correct and your connection is active, or try again." is the error. The rest of iTunes, sycning, and ipad operations work. I am on OSX 10.6.8. iTunes is the most recent addition.
    I've been having this problem for a while but it has yet to go away. Any help please?

    OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

Maybe you are looking for

  • ITunes has encountered a problem and needs to close

    Just downloaded latest version of itunes with quicktime. Won't run. Get the Itunes has encountered a problem and needs to close error to Microsoft message. Have latest Windows XP updates as well as latest Ipod updater. Have Norton Antivirus. Looked a

  • On bank web site opening a check shows in a new window and cannot access the print capability in Firefox

    When I open a check picture from my bank register it opens in a new window and I cannot print from that window. I want to be able to print to the pdf printer so that I can save a copy of my check to the hard drive. I do not have any access to any pri

  • BO Webi: How to populate a variable with the set of static values for Graph

    Hi All, I have the data: Order number, Order Date, processing time coming from the SAP Bex query in the below format: Order No    Order Date    Processing time (Days) 1                 Jan-2011      4 2                 Jan-2011      5 3              

  • MBP slow to boot and WILL NOT boot from external drive

    I have two problems. First my friends MacBook Pro which is less than a month old is taking long to load. So I did a clean install without installing anything other than what came. Still slow to boot. Sometimes I see a light blue screen for a while be

  • Opening a selection screen in display mode

    I have an ALV grid created in OOPS. Each line of this ALV has name of a report and its variant name. Here I have created a button on toolbar. When a user selects a line and clicks this button, selection screen of the selected report is to be opened i