Problem during burning multiplexing/burning error appers, please help!

I made a movie in imovie that is 1 hour long and contains still pictures and video. It also contains music all the way through it. I exported it to idvd then tried to burn it. It took almost 7 hours for it to get to the burn phase and then it pops up an error saying "problem during multiplexing/burning".
I have made movies in the past and this never has occured, and I have 30GB of HD space.
Any thoughts??

you can use mp3 ...it will simply take longer to encode though ......
http://docs.info.apple.com/article.html?artnum=61636
btw ... don't convert mp3 to aiff (that would be doing things backwards). For example, read these links:
http://discussions.apple.com/thread.jspa?messageID=795036&#795036
http://discussions.apple.com/thread.jspa?messageID=1049799&#1049799
Hope this helps.

Similar Messages

  • Can't burn - error 4261 - please help!

    I keep getting error 4261 when I try to burn audio CDs. I was able to do it for awhile just fine and then it stopped working and each time I try now I get partway through burning when it stops, the disk is ejected, and I get error 4261 message.
    Here's what I have tried so far with no luck:
    1. Decreased burn speed to 2x, on both iTunes and my CD burner
    2. Turned off my virus scanning software (Live One)
    3. Tried various makes of disks
    4. Tried burning a new mix with just songs that I had ripped from my own CDs (i.e., no "protected" iTunes)
    5. Updated to latest version of iTunes (7.3)
    6. Tried going back to version 7.2
    7. Ran diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Dell DM051
    iTunes 7.2.0.34
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    Connected Device Information:
    DiskDrive, WDC WD2500JS-75NCB1, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
    Audio CD in drive.
    Found 13 songs on CD, playing time 56:25 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:20:25
    Track 3, start time 09:03:00
    Track 4, start time 12:43:17
    Track 5, start time 16:09:07
    Track 6, start time 20:03:02
    Track 7, start time 24:53:57
    Track 8, start time 29:09:72
    Track 9, start time 33:22:52
    Track 10, start time 38:01:52
    Track 11, start time 42:28:17
    Track 12, start time 47:01:25
    Track 13, start time 52:02:35
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
    Any suggestions???
    Dell E510   Windows XP Pro  

    I got an Error 4261 message on my computer some months ago while attempting to backup my iTunes music ---about Dec. 2006. Hopefully, the problem is now solved. This was a difficult and time consuming issue to resolve. I shall provide some details of this resolution (worked for me) as I know some others are having the same problem. I hope to post this message to others with 4261 errors.
    I have a Dimension E510 computer bought in 2006. I am using Windows XP. My CD ROM burner is as follows: HL-DT-ST DVD +-RW GWA4164B. I wonder if you have the same type CD ROM.
    At first, several thoughts came to mind. Google? Never listen to music again. Invest in a sledge hammer? I decided to try and fix the problem and would work on this for the next eight months. Recently, I decided that this problem had to go away. I tried various things to correct the problem often with technical assistance as the following indicate:
    Changed copy speed//Did a restore on my computer (no help)// reversed restore
    Updated iTunes files//Did virus scans
    Contacted a company techie—Discovered my warranty was still good. Cdrom driver was updated. We got the iTunes program to copy a disk. Problem solved?? Time passes.
    The problem reoccurs. I contacted a techie again. He was able to get another program to copy on the cdrom I was using to copy iTunes music. I was told that I should contact an iTunes rep. $$. Says cdrom hardware is OK. (One can save files (ex. photos) to a new file created on the desk top and copy them to a cdrom---a test method used.)
    I read suggestions about updating my BIOS and chipset on the iTunes message board. Not being a techie I wasn’t so sure about this. (Also Techies did not go in this direction.) Time passes.
    I didn’t buy music.
    I read messages saying that I should backup my iTunes music.
    Called techie again. Updated cdrom driver. We were able to copy data using the same cdrom used for the iTunes copy. (Again this was not a fix. It was indicative of an intermittent/partial cdrom failure which occurred over time, and one manifesting itself in iTunes.) I asked him to try to copy another. Amazingly, this copy failed. Something was wrong. Now we’re getting somewhere. Techie eliminated some startup files to try to determine source of a software error, if one. This did not fix the problem.
    Techie deleted a couple registry files. I don’t like deleting registry files because they serve a valuable purpose, but I’m not a techie. Later I was told that this is a routine test procedure. (After the fix I would have to do an update of my iTunes program. iTunes has a repair feature which was on my desktop—a holdover from a previous attempt to fix things with an iTunes update. I ran this repair without harming my music files, and this repaired the program.)
    Techie said I may have a problem with my current brands of CD-R disks. I bought and tried other brands---four all total. This did not work.
    I happened to attempt to copy some pictures as I was interested in having some developed. To my surprise, my computer stopped the copy citing an error with the copy process. The problem now manifested itself with another software program. Heretofore, I could successfully copy pictures using the same cdrom but not iTunes music.
    I called the techie again. I told him what I had done and new error in copying other files to the cdrom. We attempted to use other programs to copy music and picture files on the cdrom. (My thinking is, if they had worked, then the cdrom was OK, and the problem was a software problem and likely involving iTunes---software and not hardware Obviously I wanted a cdrom replacement as this would be easier for me than pursuing imbedded software program issues.) We could not get any software programs to copy files to the cdrom in question. This was a clear indication that the cdrom was defective. We likely used up ten CD-R disks in these latest attempts.
    Looking back, there was a subtle indication of a problem with the cdrom. There was a problem with one of the songs I had copied to a new disk (No. 24 of 24 songs on a disk). The song was copied with errors. This shouldn’t have happened.
    The company replaced cdrom free of charge the next morning in about 5 minutes. Wow!
    I tried the new cdrom and began burning iTunes music right away. No 4261 error message. I also copied pictures to the same cdrom without any error messages. I also successfully used other brands of CD-R disks.
    I had problems with iTunes and a photo program after cdrom installation but fixed them with updates. I also experienced problems with Windows Media Player and Roxio/Sonic. They didn’t want to recognize the new cdrom in drive (E:). Restore made things worst so I undid this. I spoke to a tech again about these issues as I wasn’t certain of the scope/nature of problem. Issue of ownership of problem came up again. Software vs hardware. We updated both programs with updates from company support pages. This fixed the problem. Point learned here was the need to keep files updated with the latest and greatest. I am skeptical of too many changes because of risk of problems. Now, it seems, I have no choice but to do this---critical changes at least. Many thanks to Techie.
    The thought in my mind now is whether performing updates and specifically on Windows Media Player would have fixed the error to begin with. Well, I did run an update on my iTunes prior to, and there are no updates for my photo program. Looking back I would try the updates/repair first (the easy stuff) before I replaced the cdrom. I spent about 9 hours on phone with techies(caution not to delete music). Without warranty, I couldn’t have afforded this. Luckily for me it was a hardware issue.
    Replacing the cdrom on my computer fixed the 4261 error on my computer. I hope something here will be of help to some of you who have the same problem.
    Kindest regards. 08/14/07

  • Disk Utility DVD+R DL Burn Error..Please Help

    I am trying to burn my backup image of Retail OS X Leopard 10.5.6 onto a DVD+R DL so that I can re-format my macbook because I have been experiencing some issues lately. The image is verified but about half way through the disk writing process, it says that it is finishing the burn, closing the disk, and than I get an error.
    I have tried to burn the image on 2 different brands of disks wondering if that may be the issue (Verbatim and Memorex), but I am still having problems. My macbook is about a year old so I'm hoping that its not a hardware issue because the drive works for everything else.
    I'm hoping that someone can help me figure out how to get the leopard image on a dvd since disk utility is not working properly. I also have an external usb hard drive, but I'm not sure if I can use that to boot my macbook with??
    Here is the disk utility log excerpt:
    2009-08-31 19:25:53 -0700: Disk Utility started.
    2009-08-31 19:31:50 -0700: Burning Image “Mac OS X Install DVD.dmg”
    2009-08-31 19:31:57 -0700: Image name: “Mac OS X Install DVD.dmg”
    2009-08-31 19:31:57 -0700: Burn disc in: “HL-DT-ST DVDRW GSA-S10N”
    2009-08-31 19:31:57 -0700: Erase disc before burning: No
    2009-08-31 19:31:57 -0700: Leave disc appendable: No
    2009-08-31 19:31:57 -0700: Verify burned data after burning: Yes
    2009-08-31 19:31:57 -0700: Eject disc after burning
    2009-08-31 19:31:57 -0700:
    2009-08-31 19:31:57 -0700: Preparing data for burn
    2009-08-31 19:33:23 -0700: Opening session
    2009-08-31 19:33:31 -0700: Opening track
    2009-08-31 19:33:31 -0700: Writing track
    2009-08-31 19:46:35 -0700: Finishing burn
    2009-08-31 19:47:35 -0700: Closing session
    2009-08-31 20:03:20 -0700: Finishing burn
    2009-08-31 20:03:26 -0700: Burn failed
    2009-08-31 20:03:26 -0700: The device failed to respond properly, unable to recover or retry.
    2009-08-31 20:03:26 -0700: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
    2009-08-31 20:03:26 -0700: Unable to burn “Mac OS X Install DVD.dmg”. (The device failed to respond properly, unable to recover or retry.)
    2009-08-31 20:03:26 -0700:
    Thanks!!!

    Ok I have been experiencing the same issue when trying to create a back up copy of my retail version of MAC OSX Leopard. What I have finally figured out is that you need to create the copy from a image with a .cdr extension. I don't know the details but it works. I blew through too many DVD+R DL disk than i am comfortable with.. they're **** expensive. So this is what I did:
    -First create a new image with the disk utility app in your Utilities folder.
    -under the format drop down menu, choose "Master DVD, CD". Encryption set to None.
    -after you have created the image, then go back to Disk Utility and select the .cdr image that you just created and select Burn. Place a DVD dual layer into the mac and i chose the slowest burn speed.. (2.4). it should burn flawlessly.
    Good Luck and hope that helps!

  • Burning error message please help.

    I have a disc image I created and I burned it successfully the first time I tried it. Now everytime I try to burn the same disc image I am getting the below error message. I don't understand how it could have burned the first time, but now I have 12 unusable DVD's. I am burning at 1x speed. Any help would be great.
    Thanks,
    Doug

    Strange...
    Can you play the disk image with your Mac with Apple's DVD Player application (you have to double-click on the image to mount it to play it)?
    Was the disk image created in iDVD?
    You also might try 2x or 4x burning.
    What kind media DVD-R or DVD+R) and brand are you using?
    F Shippey

  • Problem upgrading Vision:M firmwear; error? please help

    Windows XP wasn't recognizing my ZVM when i plugged it into the usb port to upgrade the firmwear. so, i opened systems>drivers>hardware and reinstalled the software. the computer immediately found software that allowed the player to be recognized by the computer--triumph!?i downloaded the firmwear v..62.02_0.0.23 and thought it wasn't going alright. unfortunately, when it was done,?the computer?said there was an error and that it could not fully download the firmwear. when i restared the player, though there wasn't a firmwear error anymore, it still wouldn't turn on. so, i put it into safety mode and saw that the firmwear was supposedly downloaded.?if the new firmwear is downloaded, why isn't the player working?!
    i've had it for a little over 6 months, and this is ridiculous. can anyone help me find use for this nearly $300 paper weight?

    Download Mac OS X 10.6.8 Update Combo v1.1
    You downloaded an incremental updater. You needed the combo updater above. The updaters cannot install a full version of OS X. For that you need the Snow Leopard installer DVD that came with your computer.

  • Problem during startup of NWDS - Error while opening NWDS -

    Hi,
    iam unable to start up NWDS.problem during startup of NWDS
    Error when double click the NWDS to open.
    Error in .log file of workshop[--
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: java.lang.reflect.InvocationTargetException
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
         at org.eclipse.swt.SWT.error(SWT.java:2330)
         at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
         at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
         at org.eclipse.swt.widgets.Display.release(Display.java:1782)
         at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         ... 8 more

    Hi nayab,
                     Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder  & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
    regards
    Sumit

  • After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

    After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

    Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
    Get help with iOS update and restore errors
    If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
    To narrow down the issue, you can try different equipment:
    Use the USB cable that came with your device, or a different Apple USB cable. 
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    Solve other issues with the USB connection, then with your security software.
    If you still see the error message, check for hardware issues by following the next section.
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

    Hi i have problem  with my hp mini is giving me a error CNU9391WZR PLEASE HELP
    Hp mini 110 1140el

    Yes  bios password, i forgot  my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help 

  • TS3694 I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

    I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

    nomibutt wrote:
    ... its showing 1015 error.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • It says "error 7, windows error 127" Please help

    It says "error 7, windows error 127" Please help

    I tried that, got this error:
    An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
    Please help!

  • Hello, i have a problem with this number code  213:19,  please help me!

    Hello, i have a problem with this number code  213:19,  please help me!

    dan
    What version of Premiere Elements and on what computer operating system is it running?
    If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
    What type of user account are you using....local administrator or domain type?
    Please review the following Adobe document on the 213.19 issue. Have you read that already?
    Error 213:19 | Problem has occurred with the licensing of this product
    ATR

  • HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

    i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

    While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did.  Error 1015 occurs by attempting to restore a previously jailbroken phone. 
    It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
    Terms of Use of this forum prohibit the discussion of jailbroken phones.  You'll have to scour the internet for a solution to your problem, if indeed one exists.

  • Error messages please help !!!!

    Hi.
    It is driving me mad. It is not possible neither to install  NW_JAVA_700SP14_SR3 nor
    NW_JAVA_700SP09. Always the same error ?
    Please help what is wrong, I get these error messages:
    ERROR 2008-07-11 13:53:02.750
    CJS-30051  Cannot insert a key value pair in the secure store files. SOLUTION: See output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    ERROR 2008-07-11 13:53:02.796
    FCO-00011  The step insertAdminDataInSecStore with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .

    ever been faced with the same problem ?
    Why deleting ? It that only one way to fix this problem ?
    What are the others doing in such cases. Or am I the only one person
    where has this special problem on the world. Becides I dont believe
    in solving the problem through removing mentioned directory and
    reinstalling. Nevertheless I will try it. I let you know about the result.
    bye
    sas

  • TS3212 I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

    I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

    latest message indicates I need Apple Application Update
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS3899 Yahoo email account sync error. Please help!

    Does anyone know what this error is and how to fix it...I changed my Yahoo password and am trying to sync my email account and it will not let me. Error says 'the operation couldn't be completed (mfmessageerrordomain error 1032) Please help!!

    Thanks for the advice Lawrence. However, I tried everything you said and it still is giving me the same error. I'm honestly not sure what the problem is. I've changed passwords numerous times over the years and never had this issue before

Maybe you are looking for