Problem during Database Creation of 8.1.7 in Linux7.2

hello folks,
i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
after successful installation,,and after even successfull listener configuration,,
when database creation assistant is creating database; On 82%
At "Initializing database"
it comes::
ORA-03114: not connected to ORACLE
and if we keep on ignoring it ,then it comes:
end of file communication channel.
plz help me what i would do,,
regards.

Hi,
seems that your oracle database went down. just check if oracle is running or not by using ps command.
if its not running go to $ prompt and start the database either using sys or internal user i.e
$svrmgrl
connect internal
$startup or startup force
let me know the result.
Yogi
[email protected]

Similar Messages

Problem during database creation of 9.2.0 in RedHat 7.3

hello
I installed successful the 9.2.0 release on Linux7.3 RedHat, and I want to create a database.
ERROR:
ORA-01043: ORACLE not available
ORA-27101: shared memory realm does not existI try to start the database:
sqlpus /nolog
connect / as sysdba
startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started
Total System Global Area 99815684 bytes
Fixed Size 450820 bytes
Variable Size 88080384 bytes
Database Buffers 10485760 bytes
Redo Buffers 798720 bytes
Database mounted
ORA-01092: ORACLE instance terminated. Disconnection forcedplease help me!
what to do???
regards.

Hi,
seems that your oracle database went down. just check if oracle is running or not by using ps command.
if its not running go to $ prompt and start the database either using sys or internal user i.e
$svrmgrl
connect internal
$startup or startup force
let me know the result.
Yogi
[email protected]

JumpStartKit install hangs at 87% complete during database creation / instance configuration

Hello folks, I'm wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already gave a quick try in the VDI provided by Oracle).
So I found out about this Jump Start Kit, which installs each required piece once you've got a properly configured Linux environment. I had some fun with the prereqs but now that's all completed and I got SO EXCITED to make it past "STEP 4".
So now I'm encountering the same issue during installation -- in STEP 6 of 22 Configuration of Database Instance (Completing Database Creation) it gets to 87% complete and then nothing seems to happen, it never gets beyond that point even if I wait 10 more hours:
NOTE: I suspect my issue is not specific to the "Jump Start Kit", but rather it is something others have encountered during the Database creation/configuration step of the Oracle Universal Installer in general. And hopefully others have solved it.
"/opt/oracle/portal" is my INSTALL_DIR ; I had launched the JSK installer with this command:
./runme INSTANCE_PASSWORD=apwd ROOT_PASSWORD=rpwd DOWNLOAD_DIR=/media/sf_Downloads/JSKfiles INSTALL_DIR=/opt/oracle/portal
- The installer makes it this far, before it seems to get "stuck" -- even after many hours there is no change, HD is not doing anything, CPU stays at <5% usage:
rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
I am using VirtualBox on Windows 7, I have tried it multiple times, first with the guest OS as Oracle Linux 6, and then Oracle Linux 5 (fun learning about updating the version of Java!).
It always gets to the same point and then it just seems to do nothing -- no progress, but no error message on-screen (see log files below). But it seems to be using less than 5% CPU usage... and waiting 10 hours makes no difference.
Based on what I found in tons of Google searching, I tried increasing my swap file, adding more memory and HD space (12GB RAM and 10GB sap and 20GB free hard drive space) but still nothing changed.
In post #2 of this thread I will separately provide the logging details, which I hope will be helpful.
Thanks in advance!
Darren.
PS: moderator, I attempted to create this thread in other Spaces because I did not know about this "Portal JSK" specific one -- was that why my thread was rejected? NO REASON WAS GIVEN. If that WAS the reason, I have to say that it will be nearly impossible for anyone who is able to help me to actually FIND this thread here because as I said I do not think it specific to ONLY the Portal JSK. (But I will post it only here just in case that's the reason for the previous rejections)

First off, thank you very much for not just deleting the other 2 threads -- I intentionally created them in the other 2 spaces that MIGHT find a set of eyes that can help -- but in both I linked to THIS thread because this is the specific product. So this is the only place replies will be found therefore no "duplication" to worry about... but as I said this is likely not specific to PortalJSK since others on the internet have described a similar problem during the Oracle database installation.
Second of all. here we go, the log contents...
...So in the hope that I could troubleshoot based on some error logging, I had a look inside "/opt/oracle/portal/db/OraInventory/logs/"...
- "/opt/oracle/portal/db/OraInventory/logs/oraInstall2014-06-10_03-27-37PM.err" is empty (0 bytes),
- "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log" * (2.3MB) ends with...
INFO: Terminating all background operations
INFO: Terminated all background operations
INFO: Successfully executed the flow in SILENT mode
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
[eof]
I am not sure of the value of the additional log files inside "/opt/oracle/run/logs/", here is what they contain...
- all of the "/opt/oracle/run/logs/xyz_NofN.zip.unzip.out" files are empty (0 bytes).
- "/opt/oracle/run/logs/install_commands.log" is tiny, it just has this:
/media/sf_Downloads/JSKfiles/DB/database/runInstaller -invPtrLoc /opt/oracle/run/linux64/dborainst.loc -ignoreSysPrereqs -ignorePrereq -force -silent -waitforcompletion -responseFile /opt/oracle/run/linux64/db_generated.rsp
/opt/oracle/portal/db/ohome/bin/netca /orahome /opt/oracle/portal/db/ohome /orahnam orcl /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /responseFile /opt/oracle/run/linux64/netca.rsp /silent
/opt/oracle/portal/db/ohome/bin/dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
- "webtier_prereqs.log" and "ecm_prereqs.log" and "wcprereqs.log" all say that all tests passed.
(Tests for HD and RAM space and swap size and # of processes etc. are all SUCCESS; and all required packages are installed and high enough version, etc.)
- "/opt/oracle/run/logs/dbprereqs_log.txt" says this:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB.   Actual 8855 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 4031 MB    Passed
Preparing to launch Oracle Universal Installer from /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-26-23PM. Please wait ...[WARNING] [INS-13014] Target environment do not meet some optional requirements.
   CAUSE: Some of the optional prerequisites are not met. See logs for details. /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log
   ACTION: Identify the list of failed prerequisite checks from the log: /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
- "/opt/oracle/run/logs/wls-install.log" is the most confusing, maybe this is the reason for getting "stuck"?
2014-06-10 15:24:38,139 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
2014-06-10 15:24:38,143 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
2014-06-10 15:24:38,206 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
2014-06-10 15:24:38,209 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
2014-06-10 15:24:38,225 WARN [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - /opt/oracle/portal/fmw directory is not empty. Proceed with installation?
2014-06-10 15:24:39,223 WARN [ocmCredVerify] com.bea.plateng.wizard.installer.helpers.OCMInstallHelper - Failed test connection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:92)
at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.bea.plateng.wizard.installer.helpers.OCMException: Connection failed in SSL peer verificaition.
at com.bea.plateng.wizard.installer.helpers.OCMHelper.testSimpleConnection(OCMHelper.java:54)
at com.bea.plateng.wizard.installer.helpers.OCMHelper.testConnection(OCMHelper.java:145)
... 8 more
2014-06-10 15:24:39,228 WARN [ocmCredVerify] com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask - OCMInstallException:
com.bea.plateng.wizard.installer.helpers.OCMInstallException
at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:96)
at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
2014-06-10 15:25:49,347 INFO [Thread-13] com.oracle.cie.domain.TemplateImporter - Domain Extension Successful!
2014-06-10 15:25:49,350 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-06-10 15:25:49,351 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-06-10 15:25:49,351 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
2014-06-10 15:25:49,405 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
2014-06-10 15:25:49,405 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: update domain
2014-06-10 15:25:49,406 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-06-10 15:25:49,406 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-06-10 15:25:49,743 INFO [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull!
^ ^ ^ BUT IT SEEMS TO END AS A "SUCCESS"!?
- "install_setup.log" ends with the following -- and so does "JSKDownloader.log" (the "master log"? it contains basically what shows up on-screen)
rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
* Here are the final 261 lines of "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log"...
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Configuration Manager
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: HAS Common Files
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Netca Client
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Database 11g
INFO: The Top level Aggreage File = /opt/oracle/portal/db/ohome/inventory/ContentsXML/ConfigXML/oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
INFO: cf session will be created for OH: /opt/oracle/portal/db/ohome/ TLAggr: oracle.server instancePath: inventory/ContentsXML/ConfigXML/
INFO: cf session for OH: /opt/oracle/portal/db/ohome/ TL Aggr: [oracle.server] instancePath: inventory/ContentsXML/ConfigXML/
INFO: aggr ref length : 6
INFO: cf session hashcode: 620301082
INFO: cf session saved with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_createResponseFile is not added to the global context map
INFO: This variable s_ps is not added to the global context map
INFO: This variable s_oraName is not added to the global context map
INFO: This variable s_ccrJarDestination is not added to the global context map
INFO: This variable b_localInstall is not added to the global context map
INFO: This variable b_doConfigCCR is not added to the global context map
INFO: This variable b_ccrUpgrade is not added to the global context map
INFO: This variable s_rspFilePath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: for oracle.has.common no aggregate found by cf: no configuration
INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the global context map
INFO: This variable s_shareName is not added to the global context map
INFO: This variable s_runtimeLib is not added to the global context map
INFO: This variable s_runTimeJar is not added to the global context map
INFO: This variable s_responseFileName is not added to the global context map
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_netcfgName is not added to the global context map
INFO: This variable s_netcahelpName is not added to the global context map
INFO: This variable s_netcaUpgradeFlag is not added to the global context map
INFO: This variable s_netcaClass is not added to the global context map
INFO: This variable s_netCA_Args is not added to the global context map
INFO: This variable s_netCAInstalledProtocols is not added to the global context map
INFO: This variable s_netAPIName is not added to the global context map
INFO: This variable s_ldapclnt9 is not added to the global context map
INFO: This variable s_ldapclnt11 is not added to the global context map
INFO: This variable s_ldapclnt10 is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable s_jreJarFile is not added to the global context map
INFO: This variable s_jreJar is not added to the global context map
INFO: This variable s_jewtName is not added to the global context map
INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
INFO: This variable s_icebrowserName is not added to the global context map
INFO: This variable s_helpName is not added to the global context map
INFO: This variable s_ewtcompatName is not added to the global context map
INFO: This variable s_ewtName is not added to the global context map
INFO: This variable s_ewtFile is not added to the global context map
INFO: This variable s_ewtCompat is not added to the global context map
INFO: This variable s_cfgMethod is not added to the global context map
INFO: This variable s_caHelpZhTwJar is not added to the global context map
INFO: This variable s_caHelpZhCnJar is not added to the global context map
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /opt/oracle/portal/db/ohome/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 1
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Number of root scripts to be executed = 1
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <finish>
WARNING: Validation disabled for the state finish
INFO: Completed validating state <finish>
INFO: Terminating all background operations
INFO: Terminated all background operations
INFO: Successfully executed the flow in SILENT mode
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
----------that is all----------
re. PROCESSES/TASKS at the ending:
Also I had a look in System Monitor and noticed there a TON of processes ("Sleeping") that show up in System Monitor at this time of "freezing" or "hanging" or whatever you want to call it (where nothing is visibly happening anymore).
-The most recent shell script is "install_db_instance.sh" (not surprising) with Waiting Channel "do_wait".
#!/bin/bash
export JSK_DIR=${PWD}
. $JSK_DIR/setup_env.sh
export ORACLE_HOME=$DB_ORACLE_HOME
export ORACLE_BASE=$DB_ORACLE_BASE
echo ""
#$DB_ORACLE_HOME/bin/dbca -createDatabase -templateName $JSK_DIR/General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword $SCHEMA_PASSWORD -systemPassword $SCHEMA_PASSWORD -emConfiguration LOCAL -dbsnmpPassword $SCHEMA_PASSWORD -sysmanPassword $SCHEMA_PASSWORD -datafileJarLocation $DB_ORACLE_HOME/assistants/dbca/templates/ -storageType FS -datafileDestination $DB_ORACLE_DATA -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -oratabLocation ORATAB -recoveryAreaDestination NO_VALUE -silent
echo "$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp -sampleSchema true -oratabLocation ORATAB" >> $LOGS_DIR/install_commands.log
$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp -sampleSchema true -oratabLocation ORATAB
cat $JSK_DIR/dbca.rsp | grep -v -i PASSWORD > $JSK_DIR/dbca_saved_no_passwords.rsp
rm -f $JSK_DIR/dbca.rsp
echo ""
-Immediately after that is "java" with this Command Line:
/opt/oracle/portal/db/ohome/jdk/jre/bin/java -DORACLE_HOME=/opt/oracle/portal/db/ohome [parameters] -DJDBC_PROTOCOL=thin -mx128m -classpath /opt/oracle/portal/db/ohome/assistants/dbca/jlib/dbca.jar:[otherJarFiles]:/opt/oracle/portal/db/ohome/dv/jlib/dvca.jar oracle.sysman.assistants.dbca.Dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
-There are 7 named "oracleorcl" where the Command Line is simply "oracleorcl (LOCAL=NO)" or "oracleorcl (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))" -- Waiting Channel is "sk_wait_data".
-There are 52 named "oracle" with various similar-looking Command Lines. The Waiting Channel for these varies: "poll_schedule_timeout", or "hrtimer_nanosleep", or "sys_semtimedop" (the 2 highest ProcessIDs -- aka most recent -- have this, with Command Line "ora_w000_orcl" and "xe_w000_XE").
-There are 3 named "sqlplus", their Command Lines are "/opt/oracle/portal/db/ohome/bin/sqlplus -S -N" (the oldest 2), or "/opt/oracle/portal/db/ohome/bin/sqlplus" (the most recent) -- Waiting Channel is "pipe_wait".
Message was edited by: DarrenAg (added PROCESSES/TASKS info)

Installation stops during Database Creation at 45%

Hi all,
I am trying to install Oracle 10g on Windows 2003 Server but whenever i installed it I faced this problem that after installation during configuration proccess when it creats database it stucks on 45% showing status clone databse creation in progress... i have checked log files and i see this
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 289406976 bytes
Fixed Size          1248576 bytes
Variable Size          92275392 bytes
Database Buffers     188743680 bytes
Redo Buffers          7139328 bytes
USERS
specify password for SYS as parameter 1:
specify password for HR as parameter 2:
specify password for OE as parameter 3:
specify password for PM as parameter 4:
specify password for IX as parameter 5:
specify password for SH as parameter 6:
specify password for BI as parameter 7:
specify INPUT metadata import file as parameter 8:
specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
specify OUTPUT log directory as parameter 11:Sample Schemas are being plugged in ...
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
20070625 04:41:09
1 row selected.
old 1: CREATE USER hr IDENTIFIED BY &&password_hr
new 1: CREATE USER hr IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER oe IDENTIFIED BY &&password_oe
new 1: CREATE USER oe IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER ix IDENTIFIED BY &&password_ix
new 1: CREATE USER ix IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER sh IDENTIFIED BY &&password_sh
new 1: CREATE USER sh IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER pm IDENTIFIED BY &&password_pm
new 1: CREATE USER pm IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER bi IDENTIFIED BY &&password_bi
new 1: CREATE USER bi IDENTIFIED BY change_on_install
User created.
Directory created.
Directory created.
Directory created.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
PL/SQL procedure successfully completed.
Grant succeeded.
Could anyone please let me know how can i fix this issue...

The key of the problem may be found here:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
Which means the dbca is not recognizing some parameter. Initial database creation assumes you are able to connect as sysda without a password, Which means you should be able to connect as a valid user with ORA_DBA and connect as batch privileges. If you are installing with domain related authentication issues, then it could be the most likely reason dbca is not able to go ahead with installation.
1. Determine if you are connected with the ORA_DBA group privilege. It should be so if you are locally connected (not with a domain account)
2. Verfiy if you are able to connect as sysdba, open a sql prompt this way:
sqlplus / as sysdba
3. If you are able to connect, it means your authentication mechanism is properly working.
4. Verify the contents of the alert.log associated with the instance, some error message there will bring light on this issue.
Please feedback on the results of this initial troubleshooting procedure.
~ Madrid.

SHMAT( ) call failed during database creation

I am new to Linux, but have installed and administered Oracle on other Unix platforms. After I have completed the installation, and I am about to run the first database creation script, oracle connects internal and then tries to attach itself to the shared memory segments, and then chokes and I get this error:
ORA 27123 unable to attach to shared memory segment
followed by
LINUX ERROR 22 Invalid Argument
oerr yields:
CAUSE: shmat() call failed
ACTION: check permission on segment, contact Oracle support.
I ran ipcs on Linux, and there were no shared memory segments to report on. Is there some other way to see the permissions on shared memory in Linux. Like I said, I am very new to this OS, so any help is appreciated. If you have overcome this problem could you contact me via email at [email protected] I've never had a harder time installing Oracle than on Linux. I though this Linux thing was supposed to be the next big thing. It is about as friendly as a porcupine with hemmorhoids!!
Thanks
JMC

I dont know what you can do instead of trying to install it again.
I have installed Oracle Database 10g Express Edition on my XP laptop but seems not to be able to manage the Database in any way...
It would be nice with a simple manual for configuring the installation.
Also in need of some help...

Index problem during the creation of a new partition

We have a range partitioned table, with a local spatial index on each partition. While trying to use the alter table command to add a new partition we get the following errors.
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Error in R-tree: [mdrcritbl]
ORA-13231: failed to create index table [MDRT_D789CC$] during R-tree
creation
ORA-29400: data cartridge error
ORA-01031: insufficient privileges
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
ORA-06512: at "LPDAACECS_PART.UPDATE_METADATA", line 1937
ORA-06512: at "LPDAACECS_PART.UPDATE_METADATA", line 3625
ORA-06512: at line 1

I just wanted to expand on this for the sake of others who may need a bit more detail, having just resolved my similar problem.
In Oracle Enterprise Manager, in the left-hand tree view, expand Security then Users inside the relevant Databases entry.
Then select the name of the user/schema which needs to be able to perform the required task (in my case, create a spatial index from within a stored procedure).
On the System tab in the right-hand pane, highlight
Create Any Table
Create Any Sequence
Create Any Index
(depending on the task that needs to be performed)
Click the arrow to move these items into the "Granted" area. Click apply and your prayers have been answered. Mine were, anyway!
Regards
Stuart

Problem during site creation

Hi SAP gurus,
I've tried to create a site i.e R/3 from crm middle ware , but when ever I selected the RFC destination each times the error came i.e "the logical system already assigned with another site".
Can you please help on this, that why this error is coming and how to solve this.
Thanks and Regards
Rahul

Hello Rahul,
I think the RFC destination you're associating your new site with is already assigned. Please check the Sites maintained in tables SITESELECT , SMOF_ERPSH and SMOHSITEID. You may as well check the same from txn. SMOEAC as well. Try to see which R/3 site is associated with that destination your're trying to allot.
Thanks,
Rohit

Number range skip problem during material creation

Hi MM expert,
When we are creating material, its number is skipping by interval of 10.
kindly tell the solution.
Regards,
Santosh

Hi,
Please check which number range assigned to the Materiial type you are creating at sprologistics generalmaterial masterbasic settings-material type .and for the number range at the transaction code MMNR .
Regards,

Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Database creation in oracle 9i

can any one tell me step of database creation in oracle 9i
i try many times from 2 days through script because my DBCA is not open
when i click it. DBCA created orcl during instalation but now
it is not running. will i have to install it ?
1)i add db_name=mukesh below db_name=orcl and run script but errors
2)i crete initm.ora by copy init.ora and change db_name=orcl by db_name=mukesh
in initm.ora but errors
1)when i use init.ora without adding db_name=mukesh
i also change undo_management by AUTO to manual i get
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup pfile=D:\oracle\admin\orcl\pfile\init.ora nomount
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
SQL> create database mukesh
2 datafile 'D:\oracle\oradata\mukesh\system01.dbf' size 325m
3 logfile
4 group 1 ('D:\oracle\oradata\mukesh\redo01.log') size 100m,
5 group 2 ('D:\oracle\oradata\mukesh\redo02.log') size 100m,
6 group 3 ('D:\oracle\oradata\mukesh\redo03.log') size 100m;
create database mukesh
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-01504: database name 'mukesh' does not match parameter db_name 'orcl'
after that i add db_name=mukesh below db_name=orcl
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup pfile=D:\oracle\admin\orcl\pfile\init.ora nomount
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
SQL> create database mukesh
2 datafile 'D:\oracle\oradata\mukesh\system01.dbf' size 325m
3 logfile
4 group 1 ('D:\oracle\oradata\mukesh\redo01.log') size 100m,
5 group 2 ('D:\oracle\oradata\mukesh\redo02.log') size 100m,
6 group 3 ('D:\oracle\oradata\mukesh\redo03.log') size 100m;
create database mukesh
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: 'D:\oracle\oradata\orcl\CONTROL01.CTL'
ORA-27038: skgfrcre: file exists
OSD-04010: <create> option specified, file already exists

Hi,
If you getting a problem with DBCA go for manually process:-
I had listed steps which I follow
Step 1: Decide on Your Instance's System Identifier (SID)
Step 2: Create the Initialization Parameter File
Note:- Name the copied init.ora file init<SID>.ora because this is the default naming convention that the Oracle server looks for when it tries to start up the instance ORACLE_HOME/dbs directory (exists over the prefered path)
Edit this file's parameters so that your database and your instance will run effectively on your system.
DB_NAME Must be set to a text string of eight characters or less. During database creation, the value assigned to DB_NAME is recorded in the database's datafiles, redo log files, and control files. If, when you attempt to start the database instance, the value of DB_NAME as recorded in the initialization parameter file and the database name in the control files are not the same, the database will not start.
DB_DOMAIN A text string that specifies the network domain where the database is created.
CONTROL_FILES Is assigned the comma-separated list of control file names to use for the new database. When you execute the CREATE DATABASE statement, the control files listed as values assigned to this parameter are created. If you fail to specify a filename for the CONTROL_FILES parameter, Oracle creates a file with a default operating system dependant filename.
DB_BLOCK_SIZE Specifies the standard block size of the database. This size is used in the creation of the system tablespace and by default in any other tablespaces created. Take care when determining what this value should be because after the database is created, the value cannot be changed.
UNDO_MANAGEMENT Determines whether the database starts in automatic undo management mode. A value of AUTO enables automatic undo management; MANUAL enables manual undo management mode. In 9i, AUTO is suggested, but MANUAL is default.
UNDO_TABLESPACE When the instance starts in automatic undo management mode, it needs to have a tablespace in which to store its undo information. The default is SYS_UNDOTBS and is automatically created if you execute a CREATE DATABASE statement with the UNDO_MANAGEMENT initialization parameter set to AUTO and no UNDO TABLESPACE statement in the CREATE DATABASE statement.
Step 3: Connect to and Start the Instance
Connect to the instance as SYSDBA either using operating system authentication or the password file method of authentication and start up the instance using the STARTUP command.
sqlplus '/ as sysdba'
If your parameter file is not in the default location or is not named init<SID>.ora, you may need to specify the PFILE clause in the STARTUP command for the instance to start.
Because you do not yet have a database attached to the instance, you need to start up the instance in NOMOUNT state:
startup nomount;
The instance is now started and ready for the CREATE DATABASE command.
Step 4: Issue the CREATE DATABASE Statement
create database mydb1 controlfile reuse
Logfile
Group 1 ('/mydb1/log1/log01a.log',
'/mydb2/mydb1/log01b.log') size 50M,
Group 2 ('/mydb1/log1/log02a.log',
'/mydb2/log1/log02b.log') size 50M,
Group 3 ('/mydb1/log1/log03a.log',
'/mydb2/mydb1/log03b.log') size 50M
Datafile '/mydb1/mydb1_system.dbf' 250M
AUTOEXTEND ON MAXSIZE 500M
Undo tablespace mydb1_undo1
Datafile '/mydb/mydb1/mydb1_undo1.dbf' 50M
Default temporary tablespace mydb1temp tempfile
'/mydb/mydb1/mydb1temp1.dbf' size 75M
Extent management local
Character set US7ASCII
MAXLOGFILES 10
MAXLOGMEMBERS 10
MAXLOGHISTORY 1
MAXDATAFILES 500;
Thanks
Pavan Kumar N

Checks on vendors during the creation of PO with ME21N

Hi all,
i have this problem:
during the creation of a Purchase Order, for some types of them i have to bypass some checks that are made by standard on the Vendor.
Is it possibile to do? if it is, how can i do it?
Thanks
Lello

Hi
If they are standard controls, probably it'll mean to change the standard program: if your SAP release is ECC 6.00 u can try to use the Implicit Enhancement in order to change the standard else u need to register the standard to OSS in order to get the access key for modification.
Max

Budget exceeded error during delivery creation

Dear All,
We are facing a problem during delivery creation. Our business scenario is engineered to order and every customer order is created as a Project in PS module. the sales order is linked to the WBS element. While creating an outbound delivery for the sales order the system gives error message that "Budget exceeded for the WBS." This is for first time such error has occurred during the delivery creation. Logically delivery creation and PGI indicates negative incurrence on the WBS elements so even if the budget is not there or exhausted still then system should allow to create the delivery.
Please let me know if anybody has face this problem and solved it.
regards'
Preetam

Preetam,
What you are saying is correct. Delivery creation and PGI indicates negative incurrence on the WBS elements, the system should not check budget of the WBS.
Just for checking manually, read the details of the error and note the amount. Check budget availability of wbse and compare this amount with available budget.
Regards,
Amol Sarode

Database creation best practices.

Hi,
We are planning to setup new database, oracle-10G on Sun and AIX. It is a datawarehose environment.
Can anyone please share me the documents which speaks about best practices to be followed during database creation/setup. I googled and got some douments but not satisfied with them, so thought of posting this query.
Regards,
Yoganath.

YOGANATH wrote:
Anand,
Thanks for your quick response. I went thru the link, but it seems to be a brief one. I need a sort of crisp/summary document for my presentation, which speaks about:
1. Initial parameter settings for an datawarehouse to start with, like block_size, db_file_multiblock_read_count, parallel server etc...
2. Memory parameters, SGA, PGA (say for an sever with 10GB RAM).
3. How to split tablespaces, like Large, small.
If someone has a just a crisp/outline document which speaks about the above mentioned points, it will be grateful.
Regards,
YoganathYou could fire up dbca, select the 'data warehouse' template, walk through the steps, and at the end do not select 'create a database' but simply select 'create scripts', then take a look at the results, especially the initialization file. Since you chose a template instead of 'custom database' you won't get a CREATE DATABASE script, but you should still get some stuff genned that will answer a lot of the questions you pose.
You could even go so far as to let dbca create the database. Nothing commits you to actually using that DB. Just examine it to see what you got, then delete it.
Edited by: EdStevens on Feb 10, 2009 10:41 AM

Problem during creation of shipment document and shipment cost document

Hi
My client facing problem during creation of shipment document and shipment cost document at the time of Batch Job
Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
Shipment costs on 1.12 (VI01).
the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
pleas advice.

Hi,
Please check the batch job processing log.
As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
Analyse the batch jobs and timing of the job process.
Let us know your feedback...
Best Regards,
MKumar

Problem during Database Creation of 8.1.7 in Linux7.2

Similar Messages

Maybe you are looking for