Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Similar Messages

Database creation problems

Help!! I have installed 8i on RH Linux 6.1 and followed the "Friendly" guide steps, it worked perfectly. However when I try to create a database using the Database assistant, I get an error "Oracle Not Logged on" I've reinstalled twice and still have the same problems - can anyone help?
Thanks for any suggestions/help!
null

This problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts.

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

BAM database creation problem in Enterprise Server

Hi,
We are trying to create a new database and config BAM inside the Enterprise Server. We have already created the engine db and the directory service db but we did not start the BAM or create any db or configure anything for BAM inside the Enterprise Server.
Now when we create a new external resource to create a new db for BAM and then goto Process Monitoring ---> Manage Database
and then create a new database and a new data structure and enter the Database Administrator User and the Database Administrator Password, it gives us an error:-
Username and password already exists and it could not be created..
We have tried all usernames and passwords but could not create the BAM..
We also used the system user and the password..
What could be the possible problem? Do we have to create the BAM db while configuring the engine db and directory service db or can we start and configure BAM later?
How do we resolve this problem?
The documents do not specify what is the
Database Administrator Password
and
Database Administrator User is?
What are these?
Anybody knows?

Hi,
Lilach's tip should get you going.
Suspect you won't need it, but here's a link to a BAM installation document I wrote that might also help you with your Oracle BPM 10g installation - http://www.4shared.com/file/136283546/ca086174/ALBPM_60_-Configuringthe_BAM_Updater.html. It's an update of the excellent ALBPM 5.7 BAM installation document that Gustavo in Customer Support wrote a few years ago. Although it was written for ALBPM 6.0, the steps will work with Oracle BPM 10g.
Here's another thread on this forum regarding BAM installation - Re: Problems with the albpmwarehouse service
Hope this helps,
Dan

LiveCache Installation (Database creation) problems

We are trying to install liveCache 7.6.29 (SCM 5.0 SR2), during the database creation phase we are encountering the below error;
Execute Command : /sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Start subprocess as user with uid: root
> Subprocess stops at 20070522205211
ERR
-24875,ERR_NEEDADMI: The operating system user is not a member of the database administrators group
-24994,ERR_RTE: Runtime environment error
20145,UNIX password ********
Please let me know if any of you have faced this issue and resolved the same.
Eagerly waiting for your reply, as this is a high priority for me.
Regards,
Thilaka

Hi Thilaka,
hm, why are you now askig the forum when you've direct email contact with me?
Anyway, this really should be handled over OSS...
Just fyi:
It seems that SAPINST is trying to issue the following command:
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Can you try and see if you can issue it from the commandline on your machine (with the same user, i.e. probably root)? Please do not forget to add the password of the ql1adm, which is either not visible in the above command or forgotten (by SAPINST):
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,<b><password></b>
After issueing this, please try to continue using SAPINST (and please update the OSS message accordingly).
Regards,
Roland

DATABASE CREATION PROBLEM

I followed the oracle press dba 8 book 2.
I create the password file with password a.
I also create the database with instance u16.
When i start with my database using svrmgrl
the said password does not work.
what may be the possible reason.
null

yes u are right, i check my initu16.ora
and it is shared, i will change it
then i will be able to send the right
reply.
but very very thnaks for so quick reply.
if u don't mind if u will tell me in which
category i will place my dba problems questions because the list is so completed that
oracle 8i value is not available
null

New database creation problem

While we are trying to create new database in test server it getting below error.
Error:

Hello,
There may be session accessing the model database, and that prevents the creation of the new database. This is by design; an exclusive lock is required on model database by SQL Server, since it needs to create the new database from a copy of the model database.
Run the sp_who2 to know which session has opening the model database.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Standby Database Creation problem

Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616

Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616

WLI 7.0 samples database setup problem

I have just installed WL Platform 7.0. I want to run the WLI samples and did the following:
1. Started "Integration Database Wizard" for WLI samples and performed "SwitchDB"
- provided valid database properties for oracle. Completed successfully - config.xml
for samples is updated.
2. Ran RunSamples script - Gives database connect problems and database is not created.
The user/pwd/machine name/SID are all correct.
I observed that as part of "RunSamples", it again invokes "SwitchDB" (command I see
is "switchdb oracle"). This resets the database properties in config.xml to the defaults
- so obviously this is causing the connection problem.
Pls let me know what is going wrong here?
Thanks

Garf,
You are correct in your analysis. When you run the 'RunSamples' script,
it will call switchdb and this causes the 'defaults' to be set in
config.xml. Running the wliconfig utility is the customer experience
BEA would like to have with regard to setting up the database. However,
the RunSamples script has not been updated to correctly reflect that the
customer would have already performed this step. When RunSamples calls
switchdb, it is getting the defaults from the following location:
<USER_DEFINED_DOMAIN>/dbInfo/<DATABASE>/setDBVars and setDBVarsExt files
So for example, if you accepted the default user directory and your
BEA_HOME is C:/bea and you were using the EAI Domain template calling
your domain eaidomain and your are using Oracle, you should update the
following files:
C:\bea\user_projects\eaidomain\dbInfo\oracle\setDBVars.cmd and
setDBVarsExt.cmd
Edit these files to reflect your DB connection properties.
When RunSamples calls switchdb, these properties will be used to update
the wliPool in config.xml. I hope this helps and sorry for the
inconvenience.
Cheers,
Chris
Garf wrote:
I have just installed WL Platform 7.0. I want to run the WLI samples and did the following:
1. Started "Integration Database Wizard" for WLI samples and performed "SwitchDB"
- provided valid database properties for oracle. Completed successfully - config.xml
for samples is updated.
2. Ran RunSamples script - Gives database connect problems and database is not created.
The user/pwd/machine name/SID are all correct.
I observed that as part of "RunSamples", it again invokes "SwitchDB" (command I see
is "switchdb oracle"). This resets the database properties in config.xml to the defaults
- so obviously this is causing the connection problem.
Pls let me know what is going wrong here?
Thanks

Problem during Database Creation of 8.1.7 in Linux7.2

hello folks,
i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
after successful installation,,and after even successfull listener configuration,,
when database creation assistant is creating database; On 82%
At "Initializing database"
it comes::
ORA-03114: not connected to ORACLE
and if we keep on ignoring it ,then it comes:
end of file communication channel.
plz help me what i would do,,
regards.

Hi,
seems that your oracle database went down. just check if oracle is running or not by using ps command.
if its not running go to $ prompt and start the database either using sys or internal user i.e
$svrmgrl
connect internal
$startup or startup force
let me know the result.
Yogi
[email protected]

Problem with database tool kit, and MS Office Tool kit.

One of my programmer's who has the Office tool kit noticed this on Monday, and we haven't been able to find the problem yet.
We use the database connectivity reads and writes to a MS Access database. This program reads the data from a Symbol Scanner, and then inputs it into the database. He then has a query that to create a data table to pump into the MS Toolkit to build a MS World file (This is for a Bill of Lading).
What we found it that it works really well the first time, and on any further runs it will not update the database with any new data. It starts working again if we do a restart on the computer. It seems like something is not freeing up the database. He is freeing all the tables and closing the DB connection at each process, and everything else seems to be doing everything else right. I think the problem is that it goes into this MS Toolkit to make the table that goes on the Bill of Lading.
I did a modification that makes it read from an excel file on my desktop, and I found that it is doing the same thing. I deleted the report generator part of the program, and found that it will update the database properly. I have no clue.
here is the machine specs:
labview 8.6
Database connectivity toolkit 1.0.2
Report generator toolkit MS Office 1.1.3
MS Office 2007, the file is a Office 2003 format,

Given that the code still fails when talking to a excel file it sounds like this isn't really related to the database. Can you post a bit of your that shows the problem. Beyond that, be looking for things in the code that change between subsequent interations -- things like shift registers, globals, etc.
On the other hand, the fact that you have to restart the computer would tend to indicate that there is something going on with the MS Office side of things. To be clear: shutting down and restarting LV is NOT sufficient to clear the problem?
When the problem is occurring, if you shut down LV and open the Task Manager do you see (on the Processes tab) any MS Office components still running?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

CRM Solution database How to main the problems and solution types

Hi
Can anyone tell me how to maintain problems and solutions in the CRM solution database , after setting up the TREX and SAF for the IC webclient .
we are unable to maintain the problem types with 1200 words in the problem description in IS01 Transaction We are unable to assign the codes to the problem type at the time of maintaining the problems and solutions in the IS01 transaction for solution database . after maintaining the problems and solutions the SAF indexing with full compilation and cluster compilation . the list of documents were showing successful status but when we search by the attribute type in the knowledge search the message is showing no search refinement found .kindly expedite the solution for the the above description
The TREX connectivity has been established successfully and the SAF is configured successfully without any errors in it but but we are unable to search the text based and attribute based search in the IC webclient knowledge search .
Regards
Vikas dinaker

Dear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit

Solution Database - Maximum number of Problems and Solutions

Hi everyone,
I´m new at CRM and I was wondering if you could help me sharing your knowledge and experience on this.
I completed the SAF and solution database configuration , I was wondering if there´s a maximum number of problems when creating problems and solutions on IS01? Also Can I have 2 or more solution data bases (with different problems and solutions) assigned for a business role?
comments are appreciated
thanks!

http://help.sap.com/saphelp_crmhana/helpdata/en/a4/9fa471b41f44828da6ea1490f02e2b/frameset.htm
What about this?
Best regards,
Thomas Wagner

Problems from oracle designer to database creation

i am getting the following problem when creating a database using oracle designer:
"has no role cannot regenerate"
this is specific to the primary keys of each table
has anyone come across this before? any ideas guys?
Andy

I think this belongs in another forum, but could you answer this question: Are you trying to generate database creation scripts by select Create Oracle Database in the DB Admin tab of the Design Editor?
Kind regards,
Russ Cannon

Managed Metadata (Failed to read from or write to database. Refresh and try again. If the problem persists, please contact the administrator)

When creating a new site column of the managed meta data type in SharePoint2010, and you select "customize your term set", you are presented with one of the following errors:
- This operation cannot be completed. The term store may be unavailable.
- Failed to read from or write to database. Refresh and try again. If the problem persists, please contact the administrator

Hi,
I have been facing the same issue, however managed to resolve it.
This is due to the uncommitted statements. From Powershell try running the following script
#Connect to Central Admin, Replace the url with the environment specific URL
$taxonomySite = get-SPSite http://centraladmin:40000
#Connect to Term Store in the Managed Metadata Service Application, Ensure you put the right Metadate service application name
$taxonomySession = Get-SPTaxonomySession -site $taxonomySite
$termStore = $taxonomySession.TermStores["Managed Metadata Service"]
write-host "Connection made with term store -"$termStore.Name
#Connect to the Group and Term Set
$termStore.RollbackAll()
Hope it would help

Database creation problems and parition consolidation

Similar Messages

Maybe you are looking for