Problem elements 8 red river paper and Canon Pro 9000MKII

I am using a Canon Pro 9000 MKII, Red River arctic polar gloss and Elements 8. I believe I have followed all instructions correctly: I have installed the profile for the paper and disabled color management where it is indicated but all my prints are coming out decidedly too red with the result that browns look purple and greens look almost brown. Can anyone make any suggestions?
TIA
DG

Okay, here is where things stand: First I have calibrated my monitor with a Spyder Elite calibrator. I have downloaded and installed the latest driver for the printer. I have tried both "no color management" and "always optimize colors for computer screens". Selected "printer manages colors". Still getting a reddish tint, but marginally better. Have tried to manually adjust color by reducing the magenta which theoretically allows more green and yellow and less red. Interestingly the printer status shows of the eight cartridges, the red, green, black, light magenta and dark cyan are showing virtually no useage even after thirty five to for prints, a good number of which were 8.5 x 11. I have printed a test page and done the check nozzle for clogging tests and everything appears to be working fine.
I have seen some discussions of this issue on other boards with no resolution. I am going to try printing with another software package- probably some shareware rather than spend a bunch of money on software when the problem could be the printer. I really appreciate your taking the time to help. Any other suggestions would definitely have my attention.

Similar Messages

My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

I have Windows 7 x64 on a desktop PC. I have Photoshop Elements 13. I bought the Canon PRO-10 PRINTER on 2/3 and at first it worked fine. Then I tried to install it as a plug-in in Elements 13, and everything went bad. When I click on AUTOMATION TOOLS it does say "Canon Easy Photo Print Pro" like it should, but when I click on that I get an error message NO SUPPORTED PRINTER FOUND. CONNECT A PRINTER SUPPORTED BY THIS SOFTWARE AND THEN INSTALL A DRIVER. I also tried the FILE > PRINT command which also said there was no printer installed.
I reinstalled the Canon software and driver. Then I called Canon. I got a real live tech person who checked everything out and asked me to print from a different program. That worked fine and he said, the printer is fine. It's a problem with Adobe. Contact them. I uninstalled my Adobe Photoshop Elements 13 and reinstalled it. But the whole situation remains the same. I can't find how to contact a live technician for help so I'm appealing to ANYONE to help me with this. If you can 't help me with the printer problem, can you tell me how to reach a live tech support person at Adobe??
Message was edited by: Fran Cornelius
Made editing changes at 4:05 pm.

Hi,
After talking to 3 different Canon techs who didn't know anything about
this and told me it was Adobe's fault, a 4th Canon tech e-mailed me a list
of the Elements software that is "compatible" with the Canon Pro-10
printer. The list stops at Elements 12! In other words, Canon has not
written the software for their plug-in to work with Elements 13 yet. I
personally am stunned by this. Considering how popular Adobe Elements is,
you'd think Canon would be up-to-date on having their new printer's plug-in
work with Elements 13, which has been out there for some time.
Not only that, Canon's more expensive printer, the Canon PRO-100, also has
the same problem. My friend just bought one and told me the plug-in doesn't
work with Elements 13.
I have figured out a solution, if it will be of help. I had just
uninstalled Adobe Elements 12 and when I saw that Canon's plug-in worked
with Elements 12, I quickly reinstalled it. Sure enough, when I clicked on
AUTOMATION TOOLS there was the Canon plug-in, and when I clicked on it, the
Canon print screen opened. So I decided I would do my photo editing in
Elements 13, and when ready to print I would open the photo in Elements 12
and print it there. Hope that helps.
F
On Sat, Feb 28, 2015 at 4:08 PM, BMonahan9905 <[email protected]>

Adobe Photoshop Elements 7 - Comparison with Picasa and Canon Zoom Browser

I have recently bought a new computer and connected it to a USB hard drive which contained all my photos and a copy of an Adobe Photoshop Elements (APE) 4 catalog which permitted me to run APE 4 directly from the USB drive. The new computer runs on Windows 7 with Adobe Photoshop Elements 7. When I attempted to open the old catalog, created in APE 4 APE 4, APE 7 needed to convert it. The converted catalog then needed to reconnect with files and this took hours because APE seems to be incapable of sorting this out automatically. On the other hand Picasa 3 dealt with the matter in minutes and Canon Zoom Browser dealt with it in seconds. Why is this? What are the advantages of using APE 7 over Picasa 3 or Canon Zoom Browser?

John McQuade wrote:
I avoid keeping photos on the C Drive of my computer because of adverse past experiences of losing data when problems arose and it was necessary to reinstall Windows. I prefer to use two separate hard disc drives connected to my computer using USB ports so that I have all photos and catalogs on each drive. PSE catalogs appear to be drive letter specific so that a catalog created on one drive will not function if simply copied to the other. In PSE-4 I overcame this problem by opening the copied catalog and changing all references to drive letters. In PSE-7 I am unable to open the database and my goal is to find a quick and efficient way of modifying a copied catalog so that it functions on a drive different to the one on which the catalog was created.
Finally, and at long last, a kindred spirit that won't keep photos on the OS drive. I was told as recently as >> yesterday << that my post about saving photos anyplace else but "C:/" was "non-sequitur".
Second, I'm sort of accustomed to "USB drive", as a synonym for "flash drive", and "Ext HDD" referring to an external HDD, (this makes sense, at least in my twisted individual perception), so accordingly, I apologize for my knee-jerk lecture about it. (In hindsight, perhaps the only child in me is expecting too much also).
I never use external HDDs, but rather install additional HDDs internally to accomplish the same net result. My sensibilities here are, they are quite a bit less expensive, they do the same job, and you don't have addional s*** laying all over the place.
IMO, you are overthinking the database issue. I get to say that since I have no such ability to do so, and additionally, I have never been unable to reconnect a catalog other than within the normal Windows environment.
Therefore, I suggest changing the drive letter(s) to that of the old drive(s), and remain in blisslful ignorance as to whether PSE-7 is using the SN# or Drive letter to do its "dirty work".
As Mr. Ellis has pointed out, you're trying to do too many things at once. I'm going to suggest an "experimental" fix which is sort of backwards from Mr. Ellis', but retains the same spirit.
Install PSE-4 on the NEW machine! Insert its catalog file into its (PSE-4) correct folder. This location can be found by "Help" > "System Info".
Upon installation, PSE-4 will generate a new catalog, "My Catalog", therefore you must change the old catalog's name, (say "My Catalog 2"), to avoid a conflict.
You might have to change the "compatibility" mode for PSE-4 several times, before PSE-7 will be able to follow the file path.
As an additional note, since PSE-7 is technically, (according to Adobe), "incompatible", you can match its compatibility mode with PSE-4's, at the onset. After you have stabilized the system, change PSE-7's mode back to whatever works best.
If you need any more info on these operations, please feel free to post back.
I would like to add, that my PSE-7 in Windows 7 runs poorly in comparision with the same program in the XP environment. This seems not to be "typical", but IMO, worth mentioning.
Please also bear in mind that you can paste the entire catalog file into the "Open Catalog" dialog box, and PSE will place in its folder for you...!
Then, assuming the HDD letters are the same, it will reconnect "instantly", or in the case of a PSE-4 ".psa" cat file, PSE-7 will convert it, then open it instantly.
As an afterthought, by changing the drive letters, then pasting the .psa file into the "Catalog Open" dialog box, you do not have to make any additional installations of PSE, nor muck about in any database.

Challenges on using Photoshop Element 6, G4 with Leopard and Canon S9000 printer

Unable to find the Print Dialog Box when using Photoshop Element 6, G4 with OS Leopard(10.5.8) and Canon S9000 printer in order to choose the media type(paper type) to print photos.

Okay, let's try it this way. You've got that dialog box onscreen. Click PRINT (see circle and arrow):
Then you should see this:
Click that arrow and that window should expand to show you this:
Your actual choices in the last menu may read a little differently but that's the pulldown where you choose.

Printing Problem with CS 6 extended and Canon Pro 9500

My prints are no longer coming out centered. I have the "center" box checked in the CS6 print dialogue box. The prints are not centered left to right or top to bottom.
This seems to be a problem since I upgraded to CS 6 extended and or newest print driver for my Canon Pro 9500.
I believe that since I did one or both of these changes there is a border (consitst of slanted hash marks around the perimiter of the print dialogue picture) in the preview of the print.
The border segments left and right are not equal and are very uneven in width. The top and bottom borders are closer but still not even in width.
Can anyone help me with this issue?
Thanks,
Dennis

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
You will be able to continue your current conversation with PECourtejoie without inturruption.

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

Iphoto 9.6.1 deleted printer paper choices (Canon Pro 100)

Hello,
I fear the iPhoto 9.6.1 update may have other issues with printers beside freezing, and would appreciate any suggestions -- otherwise, I'm passing on some information.
Using a MBProRet 15" with OS X 10.10.2 and a Canon Pro-100 hardwired connection (not wi-fi), I have installed iPhoto 9.6.1 yesterday and, today, in addition to suffering some printer freezes, I no longer have all the Canon paper choices that were available with the Print command pre 9.6.1 -- fine art paper, platinum, luster, matte, and all the others are gone, deleted, just not there any more in iPhoto. The Canon paper choices are still available in Aperture 3.6 (and even MS Word 14.4.8!). I have not installed any printer software updates recently.
Unfortunately, I didn't realize this until I had spent some 5+ hours earlier today re-organizing my library which will be lost if I restore the library from TM. Since I can still print quality paper from Aperture it's not a total disaster, but ... an aggravation.
Hopefully this isn't a sign of what's to come with the New & Improved Photos. Is there a permanent Opt-Out available?

Try the directions in this Apple document: OS X Yosemite: Reset the printing system

Resolved Color Correction issue with MAC OS X and Canon pro 9000

Problem: Unable to set the Color Correction option to NONE. I have looked all over the net and it seems that there are lots of people with this problem. After months and months of battling with this issue I have finally come up with the answer. Its all down to the fact that MAC OS X comes with a pre installed driver for the Canon Pixma Pro 9000. To cut a long story short this driver needs to be deleted from your system files before you update your driver, which you need to download from the canon website. I downloaded version 4.8.6. The new driver does not seem to work with the default driver still on the comp. After following directions below you should finally be able to get your Color Correction option on your driver working.
First things first... go to the following location and delete the canon pro 9000 driver.
Location: /Library/Printers/PPDs/Contents/Resources
File Name: CanonIJPro900series.ppd.gz
(make a backup of this file if you wish )
Once you have deleted the driver you need to restart your mac.
After rebooting install the new Canon Pro 9000 driver. I suggest installing version 4.8.6(this one worked for me)
Reboot Mac again just for good measure then do a test print and you should now be able to set COLOR CORRECTION to NONE.
I know there are a lot of people out there having the same problem so if you are reading this please pass the solution on to others.

Hi Japamac,
Indeed a new cable just bought solved this problem.
Still wandering why my MacbookPro was able to print and my PowerMac not, maybe another driver issue?
Thank's anyway for your reply.

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

Problems with sync between iphone 5 and macbook pro

Never been able to sync macbook pro and iphone5.
mac dosn't recognise it in anyway. done all normal stuff check for updates, deleted itunes through terminal and re-downloaded it. still no luck.
iphone does sync with other laptops. and the usb port on my mac does work properly, i have no problems with the sync between it and an iphone 4s or even a usb memory stick.
os x 10.8.5 macbook
ios 7.0.4 iphone5

Basics from the manual are restart, reset, restore
Follow the 3R's- if a restart does not solve your problem proceed
User troubleshooting is:
1.restart, ie power off/on,
2. reset http://support.apple.com/kb/HT1430,
3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414

Problem with Time Capsule/Time Machine and MacBook Pro

I have run Time Machine against a Time Capsule for some time without problems. Suddenly I get an error message saing the disk in my Time Capsule is full. When entering Time Machine I can only see one "step" back in history despite the backup file using 650 GB on my Time Capsule.
My iMac that I havn't used much yet uses 46 GB and the disk in the Time Capsule is 1 TB so there should be plenty space... IF I undestand the file naming correctly...
Isn't Time Machine supposed to delete oldest backups when the disk is starting to get full? I hoped this system would be maintance free
As I can only see one step back in Time Machine I suspect some kind of error. Anyone have an idea what this could be?

Nick,
My first, suggestion is, mount the TCs hard disk and see how many disk images there are. There should only be one. If there are more than one, then at some point Time Machine lost track of its' previous backups and performed another Full Backup.
Alternatively, are you sure TM isn't backup up additional hard disks attached to your Mac?
Consider the following as it might give you some other ideas to explore.
*_Incremental Backups Seem Too Large!_*
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” [http://discussions.apple.com/thread.jspa?threadID=1209412]
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
*Events-Based Backups*
Time Machine does not compare file for file to see if changes have been made. If it had to rescan every file on your drive before each backup, it would not be able to perform backups as often as it does. Rather, it looks for EVENTS (fseventsd) that take place involving your files and folders. Moving/copying/deleting/saving files and folders creates events that Time Machine looks for. [http://arstechnica.com/reviews/os/mac-os-x-10-5.ars/14]
Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your directories. Every one of these changes is recorded by the OS as an event. Time Machine will backup every file that has an event associated with it since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if the above helped.
Cheers!

Canon Pro-100 Problem end of paper

Can someone please help, This printer is Brand New only printed about 8-10 photo's . All of the sudden no matter what type of paper I use, luster, glossy, matt, I even tried cleaning the bottom plate and rollers using the Canon maintence program. It prints fine but once it gets to the bottom of any paper this happens , On this photo luckly there is white border but this happens on the prints itself if printing full image or if there is very little border. You can see black marks on the bottom of the print (white border) in this case. Also printer sounds fine except when it gets to the end of the paper starts making a funny sound and this happens. The print just get's ruined , anyone?

Yeah, my suspicion was, dark ink was getting where it shouldn't. The Canon cleaning system will only do so much. And if too much fouling gets where it's not supposed to be, it can be a nightmare to get out.
Perhaps the paper is not able to absorb that much ink?
I should have asked if you were using Canon paper? The best way to get going is to make sure you use Canon brand paper and Canon brand ink. Get it right and than experiment with other papers. Never, never use anything but Canon brand ink.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Clash between mountain lion and canon mp640 printers

Has apple sorted out the problem with clash between mountain lion and canon mp640 printers? And if so, where are the drivers to download?

This is what I found on the Canon site:
About imagePROGRAF iPF605
See Other imagePROGRAF Series
Large Format Printer
Item Code: 3034B017
Overview
Brochures & Manuals
Drivers & Software
Reviews
Features
What's in the Box
Service & Support
Specifications
Supplies & Accessories
Accessibility (VPAT)
Drivers & Software
Select an Operating System and OS Version from the drop down menu below then click on a category to view the latest supported files for your product. Click on the file description to navigate to download, then click on "I Agree - Begin Download" to start downloading.
Select Operating System
Windows
Mac OS
Linux Select OS Version Select OS Version
Windows 7
Windows 7 (x64)
Windows Vista
Windows Vista (x64)
Windows XP
Windows XP (x64)
Windows Server 2008
Windows Server 2008 (x64)
Windows Server 2008 R2 (x64)
Windows Server 2003
Windows Server 2003 (x64)
Windows Server 2003 R2
Windows Server 2003 R2 (x64)
Windows 2000
Windows NT
Windows Me
Windows 98
Windows 95 Select OS Version
OS X v10.8 Mountain Lion
OS X v10.7 Lion
OS X v10.6 Snow Leopard
OS X v10.5 Leopard
OS X v10.4 Tiger
OS X v10.3 Panther
OS X v10.2 Jaguar
OS X v10.1 Puma
OS X Server
OS X
OS 9
OS 8 Select OS Version
Linux How to find your OS?
Show All
Drivers
There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. Refer to our FAQ section for connectivity issues.
In such a case as this I offer the following solution:
People who need to SCAN and/or PRINT without a compatible Lion or Montain Lion driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
Click the Apple menu ( ), and then click System Preferences .
Click Print & Scan ( ).
Click Print .
The next window looks like this:
Hope this helps

I'm working mostly with CS6 Photoshop, Indesign, Illustrator and Acrobat Pro X. Can I update from 10.6.8 to Mavericks without any problems?

Can I update to Mavericks without any problems for CS6 Photoshop, Indesign, Illustrator and Acrobat Pro X?

I can't guarantee it, but I think it's very likely you'll have no problems. Mavericks is now up to 10.9.3, and it's extremely stable.

ICloud Sync problems on iMac and MacBook Pro

When I add files to my iCloud/pages folder on my iMac, those files will not download on my MacBook Pro. When I add files to iCloud/pages folder on my MacBook Pro, those files will not download on my iMac. The files do show up on iCloud.com. I am using the same apple id on both computers. If I create a file on my iMac it shows up on my MacBook Pro but there is a cloud with a down pointing arrow next to it, but it never downloads. Vice versa is true if creating files on my MacBook Pro. If I create a folder on iCloud drive (iCloud/Folder) and put files in it they seem to sync properly, but files in subfolders created inside iCloud/Pages are the ones that do not sync properly. This makes iCloud Drive very unreliable for me. Help please? Thinking of going back to Google Drive to keep my files in sync across my iMac, MacBook Pro, iPhone 6, and iPad Air.

I have the exact same problem. iCloud drive on my iMac and macbook pro contain some of the same files, but not all.
Files that haven't synced are several days old rather than weeks to months old, so possibly this is a verrrry slow sync issue hopefully.

Problem elements 8 red river paper and Canon Pro 9000MKII

Similar Messages

Maybe you are looking for