Problem extracting fields for customer master data upload
Hello,
I have a list of fields that I need to extract into a file to be used in a customer master upload. I am having a problem with two fields. they are MOB_NUMBER in SZA1_D0100 and KTONR in RF02D. I am not sure how to retrieve these fields. I do not know if there are FM's that will retrieve the data for me or not. if anyone knows if there are FM's or another way to retrieve this data, can you please let me know.
thanks in advance for the help
this has been corrected
Similar Messages
-
Reg lsmw for customer master data transfer
Hello All,
I want to know while transfering data by lsmw for customer master data .
Scenario : There are more then one ship-to-party and bill to party so how to upload the data in this case?????
Thanks,
Sunnyhi
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
<b>step by step procedure with screen shots</b>
regards
vijay
<b>plz dont forget to reward points if helpful</b> -
Search for BAdi for Customer Master Data (XD01)
Hi experts,
i am looking for a BAdi for Customer Master data (XD01). Can anyone suggest me which one can i use?
thanks in advance.
Regards,
akshhi
execute this report
*& Report ZNAGBADI
REPORT ZNAGBADI.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
reward for useful answers
regards
Nagesh.Paruchuri -
Change Message Control for Customer Master data
Hi Friends,
I have to choose/populate a message when the user is about to create an already existing customer.
In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
OK...
When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
Now .....
I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
I want to have the same message with message types 'E','E', and 'I' respectively.......
How is this possible (or) what should i do to meet my requirement :-|
Expecting ur answers
Thanks in advance ........
Cheers,
R.Kripa.Hey yes it is not possible (as of now
I ve met the requirement by just using message statement in the program itself ............
My requirement is met but still if anyone knows about this do answer / reply
Thanks
Cheers,
R.Kripa. -
Are there any set guidelines for customer master data cleansing.
1) I was wondering if there are any set guidelines for customer master data cleansing.
2) Part of the cleansing effort involves consolidating number of divisions etc. Any pointers to this regard?
3) Also how do we deal with open docs, billing plans etc?The data cleansing requirement will take place, while move the data from legacy system to new target ERP / system. I.e. need to cleanse, enrich, de-duplicate, & standardize.
The existing data may not have consistent format since it is often being derived from various sources. It may contain duplicate information as well missing or incomplete information. Cleanse and normalize content to achieve accuracy, consistency and proper understanding of the data.
Also its a process of organizing the data, which will ensure enrichment of your data which are up-to-date, accurate, and complete. These processes are manual / labor intensive and require a fair bit of specialization.
If you need to have more details please feel free to interact with us as per below.
Thanks
Kumar
www deebrostech.com -
New SAP Tools for faster Master Data Upload?
Hi All!
I am interested in getting some detailed information on different tools that are used for faster master data upload. Please let me know about the tools apart from LSMW, BAPI, eCATT and BDC.
We basically want to know the following things:
1.Which are the tools available for this master data upload?
for eg. SAP MDM, Info Shuttle, other available new age tools etc........
2. Their performance / feature comparions?
Please provide performance / feature comparison for different new age tools in detail.
Thanking you in advance.
Regards,Hi Amar,
regarding SAP MDM you can read advantages and characteristics here: http://www.sap.com/platform/netweaver/components/mdm/index.epx
Hope this help you,
Vito -
Query in customer master data upload ....?
Hi Guru's,
I am uploading the customer master data from presentaion server to customer tables using functional module SD_CUSTOMER_MAINTAIN_ALL.
while check the Function module separatly and it working properley and i am able to ctere customer...
and i am using the same function module in the program i am unable to upload ..could please check and let me know where i am doing mistake in the below program logis..and values also moving properly before calling function module..while calling the functinal module the controle comming out of the loop and program went to dump i am able to see the message in dump as like this(it may helpfull for resolve):
Name of function module...............: "SD_CUSTOMER_MAINTAIN_ALL"
Name of formal parameter..............: "O_KNA1"
Technical type of actual parameter....: "C"
Technical length of actual parameter..: 20 bytes
Technical type of formal parameter....: "u"
Technical length of formal parameter..: 3634 bytes
Name of formal parameter at caller....: "O_KNA1"
*& Report ZERP_CUSTOMER_CREATE_UPLOAD
REPORT zerp_customer_create_upload.
PARAMETERS:p_files TYPE string.
*DATA :xkunnr(10) LIKE kna1-kunnr. "unique KUNNR
DATA: gs_i_kna1 TYPE kna1,
gs_i_knb1 TYPE knb1,
gs_i_knvv TYPE knvv,
gs_return TYPE bapireturn1,
gs_i_bapiaddr1 TYPE bapiaddr1,
gt_t_xknvi TYPE STANDARD TABLE OF fknvi,
gwa_t_xknvi TYPE fknvi,
gt_t_xknbk TYPE STANDARD TABLE OF fknbk,
gwa_t_xknbk TYPE fknbk,
gt_t_yknvp TYPE STANDARD TABLE OF fknvp,
gwa_t_xknvp TYPE fknvp.
TYPES:BEGIN OF gty_itab1,
abc(305),
END OF gty_itab1.
DATA: gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES :BEGIN OF gty_itab2,
ktokd(4), "customer account grp kna1
kunnr(10), "customer kna1
name1(35), "name1 kna1
sortl(10), "sort filed kna1
stras(35), "house number and adres kna1
pstlz(10), "postal code kna1
ort01(35), "city kna1
land1(3), "country kna1
telf1(16), "tele phone no kna1
telfx(31), "fax num kna1
kukla(2), "cust classificaion kna1
bukrs(4), "company code knb1
akont(10), "reconcilation acct knb1
vkorg(4), "sales org knvv
vtweg(2), "distr chan knvv
spart(2), "division knvv
zterm(4), "terms of payment knvv
bzirk(6), "sales district knvv
vkbur(4), "sales office knvv
vkgrp(3), "sales grp knvv
kdgrp(2), "cust grp knvv
waers(5), "currency knvv
konda(2), "price grp knvv
kalks(1), "pricing procedure assign knvv
lprio(2), "delivery plant knvv
vsbed(2), "shipping conditions knvv
vwerk(4), "delivering plant knvv
inco1(3), "inco1 knvv
inco2(28), "inco2 knvv
kkber(4), "cred control area knvv
ktgrd(2), "acc assgn grp knvv
taxkd(1), "tax classification 4 cust knvi
bankn(18), "bank account number knbk -
xkunnr(10),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_files
filetype = 'ASC'
TABLES
data_tab = gt_itab1
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_itab1 INTO gwa_itab1.
gwa_itab2 = gwa_itab1-abc(305).
APPEND gwa_itab2 TO gt_itab2.
ENDLOOP.
LOOP AT gt_itab2 INTO gwa_itab2.
SPLIT gwa_itab2 AT ',' INTO gwa_itab2-ktokd
gwa_itab2-kunnr
gwa_itab2-name1 gwa_itab2-sortl
gwa_itab2-stras gwa_itab2-pstlz
gwa_itab2-ort01 gwa_itab2-land1
gwa_itab2-telf1 gwa_itab2-telfx
gwa_itab2-kukla gwa_itab2-bukrs
gwa_itab2-akont gwa_itab2-vkorg
gwa_itab2-vtweg gwa_itab2-spart
gwa_itab2-zterm gwa_itab2-bzirk
gwa_itab2-vkbur gwa_itab2-vkgrp
gwa_itab2-kdgrp gwa_itab2-waers
gwa_itab2-konda gwa_itab2-kalks
gwa_itab2-lprio gwa_itab2-vsbed
gwa_itab2-vwerk gwa_itab2-inco1
gwa_itab2-inco2 gwa_itab2-kkber
gwa_itab2-ktgrd
gwa_itab2-taxkd
gwa_itab2-bankn.
*moving files values from ITAB2 work area to global structure related to FM.
gs_i_kna1-ktokd = gwa_itab2-ktokd.
gs_i_kna1-kunnr = gwa_itab2-kunnr.
gs_i_kna1-name1 = gwa_itab2-name1.
gs_i_kna1-sortl = gwa_itab2-sortl.
gs_i_kna1-stras = gwa_itab2-stras.
gs_i_kna1-pstlz = gwa_itab2-pstlz.
gs_i_kna1-ort01 = gwa_itab2-ort01.
gs_i_kna1-regio = gwa_itab2-land1.
gs_i_kna1-telf1 = gwa_itab2-telf1.
gs_i_kna1-telfx = gwa_itab2-telfx.
gs_i_kna1-kukla = gwa_itab2-kukla.
gs_i_knb1-bukrs = gwa_itab2-bukrs.
gs_i_knb1-akont = gwa_itab2-akont.
*I FOR GOT TO INCLUDE THE ZTERM VALUE IN EXCELL SHEET SO INCLUDED HARD CODE HERE
gs_i_knb1-zterm = '0001'.
gs_i_knvv-vkorg = gwa_itab2-vkorg.
gs_i_knvv-vtweg = gwa_itab2-vtweg.
gs_i_knvv-spart = gwa_itab2-spart.
gs_i_knvv-zterm = gwa_itab2-zterm.
gs_i_knvv-bzirk = gwa_itab2-bzirk.
gs_i_knvv-vkbur = gwa_itab2-vkbur.
gs_i_knvv-vkgrp = gwa_itab2-vkgrp.
gs_i_knvv-kdgrp = gwa_itab2-kdgrp.
gs_i_knvv-waers = gwa_itab2-waers.
gs_i_knvv-konda = gwa_itab2-konda.
gs_i_knvv-kalks = gwa_itab2-kalks.
gs_i_knvv-lprio = '02'. "gwa_itab2-lprio.
gs_i_knvv-vsbed = gwa_itab2-vsbed.
gs_i_knvv-vwerk = gwa_itab2-vwerk.
gs_i_knvv-inco1 = gwa_itab2-inco1.
gs_i_knvv-inco2 = gwa_itab2-inco2.
gs_i_knvv-kkber = gwa_itab2-kkber.
gs_i_knvv-ktgrd = gwa_itab2-ktgrd.
gwa_t_xknvi-tatyp = 'UTXJ'. "HARD CODE
gwa_t_xknvi-aland = 'US'. "HARD CODED
gwa_t_xknvi-kz = '0'. "HADR CODE
gwa_t_xknvi-taxkd = '0'. "gwa_itab2-taxkd.
APPEND gwa_t_xknvi TO gt_t_xknvi.
gwa_t_xknbk-bankn = gwa_itab2-bankn.
APPEND gwa_t_xknbk TO gt_t_xknbk.
gs_i_knb1-lockb = 'X'.
gs_i_knvv-kzazu = 'X'.
gs_i_knvv-kztlf = 'X'.
gs_i_knvv-perfk = 'X'.
gs_i_knvv-prfre = 'X'.
gs_i_kna1-spras = 'EN'.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
EXPORTING
i_kna1 = gs_i_kna1
i_knb1 = gs_i_knb1
i_knvv = gs_i_knvv
I_BAPIADDR1 =
I_BAPIADDR2 =
I_MAINTAIN_ADDRESS_BY_KNA1 = ' '
I_KNB1_REFERENCE = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE = ' '
I_NO_BANK_MASTER_UPDATE = ' '
I_CUSTOMER_IS_CONSUMER = ' '
I_RAISE_NO_BTE = ' '
PI_POSTFLAG = ' '
PI_CAM_CHANGED = ' '
PI_ADD_ON_DATA =
I_FROM_CUSTOMERMASTER = ' '
IMPORTING
e_kunnr = xkunnr
o_kna1 = xkunnr
E_SD_CUST_1321_DONE =
TABLES
T_XKNAS =
t_xknbk = gt_t_xknbk
T_XKNB5 =
T_XKNEX =
T_XKNVA =
T_XKNVD =
t_xknvi = gt_t_xknvi
T_XKNVK =
T_XKNVL =
T_XKNVP =
T_XKNZA =
T_YKNAS =
T_YKNBK =
T_YKNB5 =
T_YKNEX =
T_YKNVA =
T_YKNVD =
T_YKNVI =
T_YKNVK =
T_YKNVL =
t_yknvp = gt_t_yknvp
T_YKNZA =
T_UPD_TXT =
EXCEPTIONS
client_error = 1
kna1_incomplete = 2
knb1_incomplete = 3
knb5_incomplete = 4
knvv_incomplete = 5
kunnr_not_unique = 6
sales_area_not_unique = 7
sales_area_not_valid = 8
insert_update_conflict = 9
number_assignment_error = 10
number_not_in_range = 11
number_range_not_extern = 12
number_range_not_intern = 13
account_group_not_valid = 14
parnr_invalid = 15
bank_address_invalid = 16
tax_data_not_valid = 17
no_authority = 18
company_code_not_unique = 19
dunning_data_not_valid = 20
knb1_reference_invalid = 21
cam_error = 22
OTHERS = 23.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error Message:', 'error in creation'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'costomer', gwa_itab2-kunnr, 'created'.
ENDIF.
ENDLOOP.please let me know if my qestion is not clear...
and please cinfirm me ..that can i use the function module (SD_CUSTOMER_MAINTAIN_ALL) instead of BAPI (BAPI_CUSTOMER_CREATEFROMDATA1) for uploading customer master data.
please respond me ASAP.
thanks in advance and will give full points
thanks®ards
Srinivas. -
How to maintain the e-mail field in customer master data
Hi to all,
i need to do the field e-mail obligatory in the customer master data when i create a new customer(transaction FD01), but in customizing and in the user exit SAPMF02D this field is not present in the various structure/tables enabled (the table is ADR6 but not is in the list).
How i can do? Thanks in advance for any reply!!Dear,
Check the Functional Module through SE37 : BPAR_M_FI_MODIFY_EXECUTE_NEU
And also check the Note: 703094.
Hope it will solve.
Regards,
Kishore K
Edited by: kishore babu on Dec 21, 2009 3:38 PM -
Change Logs for customer master data in 3.1 H version
Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K -
How to use Resever Field for Customer Master
Hi
My Client Requirement. Price should be determine with Sales ORG, Distribution channel, Division, Districts, Talukas and Villages.
But Talukas and villages are not available in SAP standard systems.
Is it possible to use reserver field in Customer Master for this purpose?
If it is ok then please give suggestion how to use this reserve fields.
Thanks in Advance
MadhuHello,
the system-behavior that you describe is standard behaviour, because
the fields which you are describe (village and ..) doesn't exist in structure KOMG.
For using this field in the field catalog you can proceed like this:
1. create a new field for example ZZvillage...
2. add the new field in the table T681F for the application 'V' and the
usage 'A'
3. add the field to the include-structure KOMKAZ
4. fill the new fields in the userexit for pricing
(Pricing_Prepare_TKOMK (TKOMP)
I hope that the information are helpful for you.
regards
Claudia -
Non-editable mode for customer master data in VA01 and VA02
Hi all,
User requirement is they don't want to give permission to change customer master data (payer & ship-to ). I didn't find any user exit to do screen non-editable.
Can any one help me in this..
Regards,
SudhakaraHi Sudhakar Reddy,
For this transaction code user exits available :
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For ur requirement whixh exit is suitable plz check it out. other wise put breakpoint for userexit and check it out.
Rewards somr points.
Rgds,
P.Nag -
Table name for Customer Master data-Changes
Hi,
I want to see the changes made in Customer Master Data where i can get this
Scenario is like someone has changed the customer master data in past, We want to know who has changed it or when it has been changed
from WHICH Table I can get this information?
Note:
I need the Table name only in which we can know who has changed it or when it has been changed or What are changed by them
Thanks in advance,
Best Regards,
ChandramohanDear Chandramohan,
Try this option you can get the change details clearly
Go to XD03 transaction enter your customer number and other details then go in to the general data from here you to Menu>Environment>Account changes-->Click on All fields now system will give the list of fields which were changed from these list you double click on the single field system will take you to the details of that again you double click on that now system will take you to more details about the changes.
I hope this will help you,
Regards,
Murali. -
Addition of new field to customer master data
Hi
Is it possible to create a new field in customer master table screen and
to have the same field in sales order creation screen.
can we do it in Ideas version of ECC.
please guide me step by step.
Regards
JaiHello,
Information about the latest enhancement technology to change the standard SAP funcionalities can be found here :
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/94/9cdc40132a8531e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw2004s/helpdata/EN/94/9cdc40132a8531e10000000a1550b0/frameset.htm]
This technology is also included in ECC 6.0, you can add fields, add fields to screens, ...
Hope this is usefull.
Wim -
Customer Master data upload with Ref Customer Master
Hi all,
I want to extend all the Customer master records of a particular Sales area to another new Sales area (copy from one sales area to other). What is the easiest way to do this?
Am trying to copy by giving referrence number, but still i had to give all the relavant data which i suppose shold not be. So plz guide me the best way to copy the master data of all the customers.
Thanks in advance.
Cheers,
Anil.We have had the similar issue. I simply downloaded the customer master sales area data and replaced the distribution channel with new one in excel then division and recorded the LSMW for this only thing u have to be careful is while extending u have to use the current customer number as refernce which has to be recorded. this entire process till execution took about 30 mins + upload time.
It works perfect. -
LSMW for Customer master text upload
Hi
I would want to upload the customer master text using LSMW. I see a message type /DSD/HH_CUSTMASTEXT (Customer master additions) being available.
has anybody used this for text upload??
I am not sure how it works, i dont see the provision to enter the text unlike the "SAVE_TEXT function module.
If any one of you have used it, kindly let me know.
Thanks
ManjuHi Srinivas,
yes we could do the text upload using direct input method. I need to invoke it from web methods, it would be difficult with direct input method and hence i was looking for using IDOC's.
Regards
Manju
Maybe you are looking for
-
Oracle (64 bit) on Windows 2003 ( 64 bit )
Hi Guys, Im trying to install Oracle Release 2 (9.2.0.2) on Windows 2003 (64 bit) , but failed. It pops up following error. "The image file setup.exe is valid, but is for a machine type other than the current machine." Can somebody help on this. rgds
-
Af|table::control-bar
Hi, In my af:table , if i mention a range and if there is more data rows, one control bar is comming on the right top of the table which is used to navigate the row page inside the table.Now i want to put this range navigation control bar in top- lef
-
Change Color for metal furnitures
Newbie here....I need some advices. Currently I'm designing a laptop cover that comes with a default black glossy color and I want to change it to red, blue, green, pink, and some other finishes. I want to keep the existing glare and surface lighting
-
How can I adjust two displays for correct color matching? I have an HP w1907, which is my main computer monitor, and a Samsung SyncMaster P2370HD. The Samsung is connected to a Matrox MX02 Mini for external monitoring as well as to the pc for desktop
-
How to cancel automatic printing of crossword puzzles
when we first used the printer, we tested the crossword/puzzle app...now everytime I print something two puzzles print out. How do I stop it from happening?? I cannot remember how I started it in the first place! please help..thanks jodi This questi