Customer Master data upload with Ref Customer Master

Hi all,
I want to extend all the Customer master records of a particular Sales area to another new Sales area (copy from one sales area to other). What is the easiest way to do this?
Am trying to copy by giving referrence number, but still i had to give all the relavant data which i suppose shold not be. So plz guide me the best way to copy the master data of all the customers.
Thanks in advance.
Cheers,
Anil.

We have had the similar issue. I simply downloaded the customer master sales area data and replaced the distribution channel with new one in excel then division and recorded the LSMW for this only thing u have to be careful is while extending u have to use the current customer number as refernce which has to be recorded. this entire process till execution took about 30 mins + upload time.
It works perfect.

Similar Messages

The sort key in the master data G/l account and master data customer

Sort Key
Hi All,
in the master data (control data) of the G/l account XXXXXX (it's a reconciliation account) I've filled in the sort key the value ZZ1 (XBLNR).
Instead, in the master data of a certain customer which has its Reconciliation Account equal to xxxxxx, I've filled in the sort key ZZ2 (BELNR).
Posting a document, I need that the Assignment number is equal to XBLNR.
How could I obtain this?
Thanks a lot
G.

Hi,
You are assign short key with Customer master in ZZ1 (Account Management Tab Bottam).
I think it is helpful to you.
Regards,
Spradip

Master data upload into SAP system

Hello,
I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
Thanks in advance,
CMV

Hi,
Define the following attributes, using the F4 input help and F1 field help:
Report
Name of a registered program for this program type
Variant
You can only specify a variant with programs that are started directly.
With direct input, data from the data transfer file undergoes the same checks as with the online transaction and is then transferred directly into the SAP System. The database is updated directly with the transferred data.
For the documentation of other transactions please refer the correponding program documentation..which is more helpful,
<b>Reward points if helpful,</b>
Regards,
jinesh

FI Master data upload sequence

Experts,
Please excuse me if my post sounds vague. I am a Technical Consultant working off-site independently. I couldn't think of a better forum to get functional advice.
Please look at the below list of FI Master data upload objects, and suggest:
a. the recommended sequence in which the objects are to be uploaded
b. points to consider/tips for uploading/recommendations (LSMW/BUS*/BAPIs, etc)
FI Objects:
1. Cost Centers
2. Profit Centers
3. GL Accounts- COA,CC
4. Fixed Assets
5. Bank Data
6. Cost Elements
7. Activity Groups
8. Activity Types
9. Activity Prices
Thanks in advance.
NW

Hi,
we have to upload first the Master such as G/l Accounts , Primary Cost Elements & Secondary cost elements.then upload the open items , then p/l balances, then B/S balances , finally asset master with balances
Pre-Check LSMW: To-Do-List Before Using the Tool
The LSM Workbench is a tool that supports the transfer of data from non-SAP systems to R/3. Basic functionality of the LSM Workbench:
1. Import old data from spreadsheet tables or sequential files.
2. Convert the data from source format into target format.
3. Import the data into R/3.
Before using the LSM Workbench, you need a concept for data migration. In particular, note the following items:
· Make sure that R/3 customizing is complete.
· Analyze the data existing in the legacy system to determine which data will be needed in the future (also from a business-operational point of view).
· Consider whether usage of the tool makes sense with regard to the data volumes to be transferred. In case of very small data quantities, it may be easier to carry out the transfer manually. With very large data volumes, however, batch input technology may lead to excessively long runtimes. Rough estimate for the required time: 10000 records per hour; this value, however, may vary strongly depending on the hardware.
· Identify the transaction(s) in R/3 you want to use for bringing the data into the SAP System. Here, it may also be relevant whether the data is required for statistical (evaluation) purposes or for further processing in the system.
· Test the relevant transaction in R/3 manually with test data from the old system and make sure that all required fields are filled. There may be required fields that do not correspond to any data window in the legacy system. In such a case, assigning a fixed value or defining the field as optional for data transfer may be appropriate.
· Check the interfaces provided by the application. Is there a batch input program and an IDoc (for example)? Which method should be used in your project?
· Develop a mapping plan in written form: Assign the legacy system fields to the R/3 fields.
· Determine the form (e.g. via u201EMOVEu201C or assigned according to a rule) in which the legacy system data shall be transferred to the SAP System.
· If applicable, define the allocation rules (LSM-internal name: u201Etranslation rulesu201C).
· Define the way for extracting the data from the legacy system. (Note: LSMW does not extract data.)
· Describe the form in which the old data are available: Will the host or the spreadsheet interface of the LSMW have to be used?
· If only a part of your legacy system will be replaced by R/3, define the functionalities to be provided by the SAP System and those to be provided by the legacy system. If required, create a concept of the data flows and interface architecture.
These questions can only be answered individually for every customer; as a matter of course, this should be done before the tool is used!
SKS

Migration of Equipment Master Data together with PRT data

Hello Experts,
we need to migrate Equipment Master Data which have activated the view PRT data. Most of the fields in this view are stored in table CRFH. Is there a way to migrate Equipment Master Data together with the PRT data of the Equipment? All the BAPI's I found do not have an import structure for those fields. Is a batch-input the only way?
Does anybody know a mass change transaction for Equipments?
Thank you and Regards
Christian

Hi Krishna,
You can use the standard batch input program RFBIDE00 in LSMW to update the customer master data. However, there might be scenarios where you might be required to update the fields which do not get updated by the standard bacth input program. If any of such fields are defined as mandatory, then you wont be able to use this method directly.
In such cases you will have to either create a recording to poplate the fields which do not get updated by the standard program and use both the recording and the standard batch input program to update the customer master data OR create a recording for customer master create and use the same in LSMW.
Best regards,
Harsh

LSMW used only for master data upload?

Hi
Can you please let me know if LSMW is used only for master data upload or we can also use it for transaction data ?

Hi Christino.
I have come across a standard SDN thread which deals with the uploading master data, refer it:
[SDN Reference for uploading master data using LSMW|how can we upload master data by using LSMW;
[SDN reference for which uploading is preferred (Master data or Transaction data)|Which one is better for uploading data LSMW or ECATT ?;
Good Luck & Regards.
HARSH

Master data Uploading using QTP

Can any one explain detail about QTP master data uploading.If possible send me the materials abt QTP uploding.

Hi
You won't get ready made template.
You have to prepare the layout according to your requirements.
First check it with the business requirements, and make note of the details and find the relevant fields in the relevant tables of the master data.
Prepare the layout as below:
Say your doing for the Chart of accounts load - Table is SKA1 - take the important fields technical name, character type and length of the field. Enter the data and save it in the desired format.
VVR

Master data uploading

Hi friends,
1.Please send me the prerequisites for HR Master Data Uploading?
2.Also tell me is it mandatory to create the jobs and positions, on OM?, If no what is the option?
since we have to use the imp. Infotype Org Assignt 0001>position field. We have 133 positions and jobs. how to do it?
Please reply.
Thanks,
milinds

Hi Milind,
1.Please send me the prerequisites for HR Master Data Uploading?
>>You need to first understand what all data need to be uploaded i.e. which all infotype you will be maintaining for the master data.
Then the second step is to identifying the fields for different infotypes, so while doing this you can create the template for each infotype. Along with this you also need to understand the source data means will it get directly uploaded or do any translation logic is required.
After this you can create LSMW's or BDC program.
2.Also tell me is it mandatory to create the jobs and positions, on OM?, If no what is the option?
since we have to use the imp. Infotype Org Assignt 0001>position field. We have 133 positions and jobs. how to do it?
>>If you want authoraizations and workflows for approvals. also if FI is integrated then its always best to have positions, organizational units, cost centers in place and the rellevant relationships between the objects.
You can create BDC using TCODE PP02 for creating positions, Jobs and their relationships.
Regards,
gusd

Function module Vs BDC for master data upload

Hi ,
Please advice we should use the following function modules for master data upload or we should go for BDC.
MP_RFC_SINGLE_CREATE
MP_RFC_INACT_CHANGE
MPLAN_CREATE
MPLAN_CHANGE
MPLAN_SET_DELETION_INDICATOR
ASSET_MASTERRECORD_MAINTENANCE
MPLAN_ITEM_CREATE
MPLAN_ITEM_CHANGE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
Actually, we have already used these function modules in our upload program, but we are not sure if these function modules will create any data inconsistency.
Please let me know, if we should continue using the FMs, or there is any risk using the FMs and we should replace them by BDC.
Thanks in advance.

HI Vikram,
Better to serch for the BAPI for uploading the master data.Becuase we have problems with BDC and FM's.
If you use FM's it does n't contain all the fields which you want.IF you go for BDC this is not maintainable for future releaseas.IF you upgrade then screen may change.
IF don' have any BAPI then better go for BDC.
Thanks

Master data attributes with direct update...its very urgent

Hi all,
Could anyone tell me how to laod the master data attributes with direct update in the infopackge..
provide steps to create master data attributes and how to load..
Thanks,
Manjula

Hi Manjula,
Flexible Uploading
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
honor with points if this helps,
Sudhakar

Master data records with one key

Hello All,
I have scenario that I need to load the master data records with one key.
For ex--
Cluster            Dcode               version
5000                 DC1                  2008
5000                 DC1                  2008
5001                  DC1                  2009
Could you please let me know possible ways.
Thanks

In your case if Cluster is the key then the underlying attributes data will be overwritten when the same cluster key comes.
as per you example data finally it loads only two records in to the target, since first two records key is same.
Hope this helps.
Veerendra.

HR Master Data Upload

Hi All,
I am doing the HR master data upload, I found one idoc HRMD_A but i am unable to find the infotypes PA2001,PA2002,PA2010,PA2012 in this idoc type.
Could you please let me know in which type i can get all inoftypes including these .
Thanks,
Satheesh

Check these threads.
Need ur helps on - HR master data upload Thru LSMW
about HR data upload

Add new bank account in master data client with idoc DEBMAS.

Hi friends,
I have an issue.
I am trying to add new bank account in master data client with idoc DEBMAS.
But when I submit, then just overwrite the bank data but not add.
I try playing with MSGFN code with value '009' or '004' but nothing done.
Someone has met this issue ?
Thanks for your answers.

Thanks,
But what do you mean ? where can I find this path , in img ?
Fields->Set Qualified Update ->Append Option
I think we have to use another idoc :
BUPA_C_BANKDETAIL_ADD01 SAP BP, BAPI: Add Bank Details
I'll try...

Can any one tell me what is the master data upload sequence in sap pm...? i am new to sap pm module..

Hi experts,
Please help me to get the sequence for master data upload in sap pm ......

Probably yet another Blog/Document for someone to create..
Here's my offerings:
Finance data: chart of accounts, g/l accounts cost centres, profit centres, activity types, etc
Configuration data
Classes/characteristics
Inspection characteristics
Master Warranties/Permits/Partners/Documents
HR masters
Work centres
Materials
Functional locations
Equipment (serial numbers)
Measurement points/documents
BOMs
Task Lists
Maintenance items/plans
Maintenance plan schedule
Historical orders (if required)
Historical notifications (if required)
Historical Measurement documents (if required)
PeteA

Problems in master data upload

Hi all,
What r the problem we will face in master data upload?
Plz explain this as very urgent.
Thanks in advance
Venkat

Hi Venkat,
My suugestion is Before Posting a new Post Please close u r previous threads if u r satisfied...
Then everone will be interested to answer to u r queries..
Regards,
Sridhar

Customer Master data upload with Ref Customer Master

Similar Messages

Maybe you are looking for