Problem facing with BC-Set activation while doing servicedesk configuration

Hi All,
I have installed Solution Manager 4.0,And i applied all the latest service pack (both abap and java service packs).I try to activate some BC-sets(ex: Service_desk_change_request_32A,Service_desk_change_request_32F2).When try to activiation it is giving Runtime errors like DATA_LENGTH_0
and Exception CX_SY_RANGE_OUT_OF_BOUNDS
Can some one help how to activiate the BC-Sets in the process of configuring the Service desk userin the SolutionManager system.
regards
srujan

Hi JP,
The BC sets in note 898614 are in IMG activity "Activate Service Desk BC Set". I put this together for myself just to track what the heck is going on while I configured this.
Cofiguration of Basic Settings:
SAP Solution Manager Implementation Guide
..SAP Solution Manager
....Configuration
......Basic Settings
........Standard Configuration of Basic Settings
..........Solution Manager
............Activate Maintenance Optimizer BC Set
................SOLMAN40_MOPZ_TTYP_SLMO_000
................SOLMAN40_CHARM_PROXYFACT_001
............Activate Service Desk BC Set
..............This task refers to the BC sets in note 898614:
................SOLMAN40_SDESK_BASICFUNC_000
................ZSOLMAN40_SDESK_ACT_ADVCLOSE_001
................ZSOLMAN40_SDESK_ACTIONLOG_001
................ZSOLMAN40_SDESK_TPI_ACT_AST_001
..............Then note 898614 says apply BC sets in note 931196:
................ZSOLMAN40_SDESK_TEXTTYPES_001 << This errors out
................SOLMAN_CORPF_TEXTTYPES_001 << Should I?
For me activating BC Set ZSOLMAN40_SDESK_TEXTTYPES_001 gets the error:
COMV_TEXT_CUST No data found for writing activation links for object COMV_TEXT_CUST.
Also, I think I may have blown it by not doing the piece lists. I have heard differently whether to do it or not and in which client and how to get it form dev to prod.
Also, I could be wrong but I thought SERVICE_DESK_CHANGE_REQUEST_32A was from SolMan 3.2.
Please post if you get it all figured out.
Good luck,
David

Similar Messages

Problems Faced with Partitions in Oracle 9i.

I have a doubt regarding the partitions in Oracle 9i can you please help me regarding this?
Create table t1
( x number,
y number,
z number);
insert into t1 values (1,1,1);
insert into t1 values (2,2,2);
insert into t1 values (3,3,3);
Create table t2
x number,
y number,
z number
partition by range(x)
partition p1 values less than(2),
partition p2 values less than(3),
partition p3 values less than(4),
partition p4 values less than(maxvalue)
alter table t2 exchange partition p1 with table t1;
SQL> alter table t2 exchange partition p1 with table t1;
alter table t2 exchange partition p1 with table t1
ERROR at line 1:
ORA-14099: all rows in table do not qualify for specified partition
WHAT DOES THIS ERROR MESSAGE MEAN? I AM NOT ABLE TO UNDERSTAND THIS? WHAT NEED's TO BE DONE TO RESOLVE THIS?
alter table t2 exchange partition p1 with table t1 WITHOUT VALIDATION;
SQL> SELECT * FROM T2;
X Y Z
1 1 1
2 2 2
3 3 3
SQL> SELECT * FROM T2 PARTITION(P1);
X Y Z
1 1 1
2 2 2
3 3 3
SQL> SELECT * FROM T2 PARTITION(P2);
no rows selected
SQL> SELECT * FROM T2 PARTITION(P3);
no rows selected
(i) Why i am facing this error ORA-14099: while partitioning? Can you please brief me about this ?
(ii) why there is not data's in the PARTITIONS p2 &p3 after the partitions is exchanged WITHOUT VALIDATION options?
what is going with this method?
(iii) Also can you please explain me with an example how to partitions a table having milliion of records with EXCHANGE PARTITION Options with MULITPLE partition segment's (say partition based on status id column with 6 differnt values i am thinking to use list partitions using status_id as partition key) ?
Also i have tried the below approch is this a right approch? please correct me if i am wrong.
Create table t1
( x number,
y number,
z number);
insert into t1 values (1,1,1);
insert into t1 values (2,2,2);
insert into t1 values (3,3,3);
commit;
Create table t2
x number,
y number,
z number
partition by range(x)
partition p1 values less than(2),
partition p2 values less than(3),
partition p3 values less than(4),
partition p4 values less than(maxvalue)
SQL> insert into t2 select * from t1;
3 rows created.
SQL> commit;
Commit complete.
SQL> SELECT * FROM T2 PARTITION(P1);
X Y Z
1 1 1
SQL> SELECT * FROM T2 PARTITION(P2);
X Y Z
2 2 2
SQL> SELECT * FROM T2 PARTITION(P3);
X Y Z
3 3 3
SQL> SELECT * FROM T2 PARTITION(P4);
no rows selected
EXPLAIN PLAN
FOR SELECT * FROM T2 WHERE X = 1
| Id | Operation | Name | Rows | Bytes | Cost | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 9 | 2 | | |
| 1 | TABLE ACCESS FULL | T2 | 1 | 9 | 2 | 1 | 1 |
Now my question is what is problem instead of using EXCHANGE PARTITION why caun't we follow this above approch?
to partition a non-partitioned table?
Thanks,
Rajesh.

The value of 3 should obviously should go into the partition P3.Then why are you putting it into p1?
Your command,
<tt> alter table t2 exchange partition <b>p1</b> with table t1;</tt>
will swap partition p1 with the contents of table t1, leaving you with partition p1 containing the three values that were in t1. At first it told you there were rows in t1 that did not belong in that partition, but you used FORCE so it put them in anyway.
btw there are notes in the FAQ about how to use ** tags to format your posts.
~Edited by: William Robertson on Oct 15, 2008 6:49 AM~

System status LKD is active while doing ME21N

Hi,
While doing ME21N transaction system showing
"Error: System status LKD is active ( ORD 300303)"
Thanks and Regards
SK

Hi,
First of all ,please make sure if the status lkd is already exist for
the orders in koko4.If that's the case it is necessary to revoke the
status LKD on these orders e.g. with transaction KO02.
Best Regards,
Arminda Jack

Error while doing BAM configuration in JDeveloper

Hi,
I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
"Server is not set up correctly SOA1"
I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
Host Name: SOA1(system name)
Port Number: 80
User Name: Administrator
Password: <windows domain pwd>
Domain Name: DOMAINNAME
Any help would be highly appreciated.
Regards,
Shaily

hi Shaily
It looks like suggesting a different forum is not needed, because you already tried that ...
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
I hope you get some answers.
success
Jan Vervecken

Issue with 32 bit mapping while doing the job configuration.

Hello,
From my end, facing a strange issue while execution of job in 32-bit mode.
As part of the solution implementation, do have one excel file which has to be imported to my database. For this activity, have created a package in SQL 2012 and changed the project properties to 32-bit (by setting False from the Run64bitRuntime). With this
implementation, It has worked fine without having an issue.
As we are going with the project deployment model, have deployed this package to Integration Services Catalogs. From my end, have executed the package by choosing the option to execute in 32-bit Runtime and It is also worked fine.
From my end, have configured the same package through job by mapping the package from SSIS Integration Catalog. Now, the job is getting failed as the package is not running in 64-bit mode. Have tried to configure the package in 32-bit mode. But, I
could not be able to configure the same. I am getting the option of 32-bit run time when I am going with File System,SSIS package store not with the SSIS Catalog.
From your end,could you please help me in resolving this issue?
SSIS Package Store--> Execution Options
SSIS Catalog--> ????
Regards,
Pradeep.

But it is a job property, not the catalog:
Arthur My Blog

Ended with return code: === 8 === while doing transports from Dev to Test

Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request   : BD1K900065
System              : BQ1
tp path             : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.

Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu.

Problem Importing with Channel setting in Auto mode

I had the impression that if I chose the "auto" mode on channel selection under Edit-Preferences-Burning - Custom, then Itunes could tell if the recording was mono or stereo and upload accordingly thus saving space for mono recordings. But with "auto" all of my uploads are in stereo - only when I change the setting to Mono will Itunes upload a mono recordng as mono. Was I wrong in my assumption of the Auto setting or is something wrong - I am usung the latest version of Itunes 7 Thanks in advance for any help Jay

Also, I am not using a multi-channel output, only built-in output (stereo). Still, does not seem to work.
Another test -- opened file in Soundtrack Pro. I see the four channels, though they are grouped in some way that I cannot separate at present. I save the file as aiff, and this time Logic will open it, though it seems somehow corrupted, won't play.

System status INCM is active while doing the confirmation from SRM

Hi,
User is getting the below error while trying to create confirmation in SRM for some of the PO's.
Partner XXX not found
System status INCM is active (Confirmation XXXX)
Partner not found XXX (Item 1)
The version is SRM 4.0 (Classic scenario). We have already checked the user profile and it is consistent in the system. The BP record for this user in table BUT000 is all fine. User is able to create the confirmation for other PO's. Also we have checked the G/L account for any posting period issue. Everything is fine. The error is coming while user is trying to do the confirmation for some of the PO's.
Any help is highly appreciated.
Warm regards,
Aswini

The error is coming while user is trying to do the confirmation for some of the PO's.
Check these POs to see if any of the partners are invalid. You could do this through "process purchase order" transaction. Sometimes this error occurs when one or several of the PO partners no longer exist, e.g. left the company, etc.

Problem facing with file upload in webdynpro

hi
this is sathya, i very thank ful to your answers, coming to my problem
i have written the code for file upload action method, in this below code there is no syntax problem.
but there is a run time error , i.e convt_no_number
kindly rectify that.
data: lt_final type table of zalvtab,
         ls_final type zalvtab,
         "t_table1 TYPE STANDARD TABLE OF str_itab,
         "fs_table TYPE str_itab,
         i_data TYPE STANDARD TABLE OF string,
         lo_nd_zalvtab TYPE REF TO if_wd_context_node,
         lo_el_zalvtab TYPE REF TO if_wd_context_element,
         l_string TYPE string,
         l_xstring TYPE xstring,
         fields TYPE string_table,
         lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_sel_node,
         data_table TYPE if_main=>elements_sel_node.
" get single attribute
    wd_context->get_attribute(
       EXPORTING
       name = `upload`
       IMPORTING
         value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
    EXPORTING
      in_xstring = l_xstring
    IMPORTING
      out_string = l_string.
    SPLIT l_string AT cl_abap_char_utilities=>newline INTO TABLE i_data.
" Bind With table Element.
   LOOP AT i_data INTO l_string.
    SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE fields.
    READ TABLE fields INTO lv_field INDEX 1.
    ls_final-ebeln = lv_field.
     READ TABLE fields INTO lv_field INDEX 2.
    ls_final-ekorg = lv_field.
     READ TABLE fields INTO lv_field INDEX 3.
     ls_final-bukrs = lv_field.
     READ TABLE fields INTO lv_field INDEX 4.
     ls_final-ebelp = lv_field.
      READ TABLE fields INTO lv_field INDEX 5.
     ls_final-menge = lv_field.
     READ TABLE fields INTO lv_field INDEX 6.
     ls_final-netpr = lv_field.
     READ TABLE fields INTO lv_field INDEX 7.
     ls_final-aedat = lv_field.
     READ TABLE fields INTO lv_field INDEX 8.
     ls_final-waers = lv_field.
     READ TABLE fields INTO lv_field INDEX 9.
     ls_final-description = lv_field.
      APPEND ls_final TO lt_final.
ENDLOOP.
lo_nd_zalvtab = wd_context->get_child_node( 'sel_node' ).
lo_nd_zalvtab->bind_table( lt_final ).

Hi Sathya,
         I guess you are trying to upload data from excel file(XLS format).
         If it is correct then you cannot do this in webdynpro, first you save the excel file as tab delimited.
         Open your excel file->save as->other formats->give file type as TEXT(Tab delemited).
         Now use this file to upload. It should work perfectly.

Problems faced with VL10D transaction in sap

Hi,
   I am using BADI to generate error message for VL10D transaction.The error message is generated properly.But it is exiting the transaction.The user wants that it should come back to the initial screen of the VL10D transaction.
   I have tried to do this with warning messages displayed as error message.But it is not working properly.The delivery is getting
created with errors.
    Please help me out. <removed by moderator>
Thanks and regards,
Raka.
Edited by: Thomas Zloch on Sep 28, 2011 1:06 PM

Hi
Combine your BADI as a warning message and with older userexits (see Note 198137 - VL10: Customer-specific enhancements / user exits). Use the include LV50R_VIEWG06 and set cf_subrc = 1 for the deliveries that you must not create because they hava an error.
I hope this helps you
Regards
Eduardo

Problem facing with Transient in View Object

Hi Friends,
I had created a new table in the database and create an Entity Object for that table,
i had add this entity object in one of the View Object and when i was trying to add attributes from Available List to the Selected List.
The Attributes are changing to Transient and that particular attribute Mapped to column got unchecked, even tho i check it manually it is turning unchecked automatically when i click on Apply Button.
* In Entity Object Attributes are checked with >Persistent and Queryable and Type is NUMBER Updatable checked to Always.
Can you please suggest me where am i going wrong, i had done me best to solve this problem.
Please help me out from this problem.
Thanks in advance,
Rahul

Rahul,
Your question is related to ADF Business Components, not to JHeadstart.
Please use the JDeveloper forum for this question.
Thank you,
Steven Davelaar,
JHeadstart team.

Problem faced with setContentType

Initially i am sorry for posting this here as this is not a Swings topic.
I am facing a prob. of the foll. type :
I have a string with me which has some content for eg strA =
To:
123/456
239.
Items Qty.
2 8
Thanks,
ABC.
Lets suppose the content is as above.I am using setContentType(strA,"text/plain").I can use text/html but there is a certain requirement due to which i have used plain text & the final format is as I have printed above.
I am mailing this text.
My prob. is that i receive the same format thru Microsoft Outlook ,hotmail & yahoo accounts.
But am facing a prob. with the format when i receive it thru Outlook Express.
The text gets typed without any alignment.,spaces ....
What could be the reason & is there any way to solve this.Is my MIME type wrong?

\n...is the only tag i have used...i have avoided even \t........
basically the string spaces r maintained by means of spaces.....
as no tags were wanted to be kept...as i said this is plain text......
but even the spaces r not taken properly...........the text get's printed the way it wants to .......in outlook express...i believe that text/plain cud be replaced by something else but that is what i don't know....

PIONEER DVR-105 problem only with one set of CDs

My PIONEER DVR-105 works fine with most CDs, but when I bring NOVA Art Explosion CD set home from work, I can't get them to appear on my desktop. I've checked Pioneer website for firmwear upgrades & the last one is for Mac Classic.

This sometimes just happens - a drive won't like a certain set of media. Happens to me with client-provided CDs/DVDs.. There's not much you can do but upgrade the drive to a newer unit.
-Douggo

Problem faced with Jtable

I have a row added to JTable.I am trying to edit column 2 in it.Now i keep my cursor in the same column which is being edited (i.e the focus remains in the column being edited) & click on Cancel Button
By means of this button i clear the Jtable.i.e delete the row which is added to it.
Now i add 1 more row to this Jtable.
The same column of the newly added row displays the contents which had been edited previously.
Eg : Row consists of 3 columns Col. 1 : Name
Col 2 : Roll No
Col 3 : Place .
Assume that i add a row with name pradeep Roll No. 2 & Place - Mumbai.
I edit col. 2 having roll no. 2 & make it 3.Keeping the focus here only i click on cancel.
This row has been thus deleted.Now i add a new row..which has name : Manish Roll No : 5 & Place : Mumbai.But Column 2 shows 3 instead of 5.
I have tried Jtable..repaint();
jtable.updateUI();
jtable.lostFocus();
jtable.getCellEditor().stopCellEditing();
however still this happens...is there any way to make jtable lose focus externally.....or any other way to handle this.

It's the same what i have explained, though it's not real stuff..the idea is the same....yet i have clarified things below also...i have an textfield wherein i enter the main code.I click on enter & the details related to this code get added to the grid.Like in the example given be4...Let's assume i enter 1 i.e the code in the textfield & click on enter.The details related to 1 are Name : Pradeep Roll No. : 2 & Place : Mumbai.(Note that Name,Roll No & Place are column names)
This gets added to the grid.Now i change the Roll No. which is currently 2 to 3.My focus is in this column.For some reason i don't need this record & click on cancel button.
Now i enter 2 in the Textfield & click on enter. The details expected to be seen in the added row are Name : Manish , Roll No. 5 & Place Mumbai.But what is seen instead of this is Name : Manish , Roll No. 3 & Place : Mumbai.Also the focus is already in column 2.
When we edit a column the code added changes the column data & then calls
jTable.getCellEditor().cancelCellEditing().
The code on clicking cancel calls
jtable.repaint();
jtable.updateUI()
if (jtblBarCodeDetails.isEditing()) {
jtblBarCodeDetails.getCellEditor().stopCellEditing();
well.....that is it..

Problem facing with iphone camera

Hi Guys
I am using iphone 4 from last 3 years, from last 6 months i am not able to use camera of my phone. When I try to open cam shutter it keep shut. I am not able to option shutter. Can you guys help me to sort out this problem..
Regards
Parveen

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problem facing with BC-Set activation while doing servicedesk configuration

Similar Messages

Maybe you are looking for