Problem from alpha conversion in bi report input screen

Hi Experts,
we have implemented standard MM module and loaded data. Everything is ok, but problem is while running any bi report for MM, at selection screen when we provide material (0MATERIAL (18)) value is 11, it is not excepting instead of it accept 000000000000000011.
User requirement is he should provide 11 not 000000000000000011.
Please guide me for this.

For 0 material info-object the conversion routine used must ne MATN1 .
Trying to use this conversion routine through the general tab of the info-object and activate the info-object .
By using 0matn1 as the conversion routine you should be able to put only 11 in the selection screen and execute the report.

Similar Messages

  • What are the commonly used conversion routines apart from alpha conversion?

    hi all,
    Can any one let me know the commonly used conversion routines apart from alpha conversion routines ?
    thanxs ina dvance
    hari

    Hari
    There are lot of conversion routines, like
    BUCAT Conversion Routine. eg. The BUCAT conversion routine converts the internal presentation of the budget type
    (0BUD_CAT) into the external presentation (0BUD_CAT_EX), using the active entries in the
    master data table for the budget type InfoObject (0BUD_CAT).
    see the link below for all the routines.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9119290-0201-0010-69af-96fe3bf00243
    assign points if helpful
    Kalyan

  • Problem from FCE conversion to burned DVD

    I've edited a 15 min. film on FCE 3.5. Use quicktime conversion, self-contained to go to IDVD. The self contained film looks fine, burn it, play DVD and the DVD has in some scenes, a "ripple" effect and alot of "interlace" problems. Brought hard drive with film to mac store, burned on their computer same thing happened. So I know its' not mechanical problem with my burner. Something in the conversion, except that when you play converted film in IDVD before burn, it looks fine?
    Help, need to get this film to someone and can't figure out problem.

    What does this mean? Is this a question? Yes, play it back on a TV set. Or does this mean you did play it back on a TV set. If the latter you'll need to go through your entire process to see where the interlacing is being damaged. It should play correctly on a interlaced display.

  • InfoObject Help taking more time in BI web report Input screen

    Hi all,
    i am having a report consist of 3 variables .So, when ever i will execute it, variable screen will pop up.
    Now, There is an object name as "Master Location" , and it is having variable .
    Now, the problem is when i click on the help of Master Location , it will take 15-20 minutes to open the help window.
    "Master Location" is the navigational attribute of the Object "Location".
    Also, If i will not select the help button on the initial screen and directly executes the query and if i will open the Filter value screen for Master Location , it will open the same help window within the 3 sec.
    Please suggest .
    Regards,
    Macwan James.

    Hi,
      This is usually due to some backend select statement failure ie due to inconsistencies in master data. Sometimes if you run RSRV you can fix the issue. At the worst case if you can clean up the master data and load them newly you will get this issue fixed. We have faced this where the selection screen never returned a value and clean up of master data helped us in fixing the issue.
    Hope this helps.
    Thanks,
    Arun

  • Substitute of alpha conversion routine

    Hi,
    Is there any routine as a substitute for the alpha conversion routine. I am getting problem in alpha conversion and the info object is filled by routine to infocube.
    I cannot overcome the problem by checking in the transfer rule.
    Please provide some input to resolve the problem.
    Thanks and regards,
    V.Satyanathan

    Write your code in start routine to convert it to upper case.
    Thanks
    Nilesh

  • Alpha Conversion  in node 00000010 for info object 0COSTCENTER

    Hi Masters,
    I am getting the problem in process chain hirachies. Info Object 0COSTCENETER  hier loading the data through process chain sucessfulyy completeed, when saving that hieracies process chain i am getting the error . the  problem is " Alpha conversion in node 00000010 for info object 0COSTCENTER".
    please give me some solutions
    thanks in advance.....
    kk

    kk,
    You can solve by writing an alpha conversion routine in the transfer rules for that infoobject and then load the data.
    DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = TRAN_STRUCTURE-0COSTCENTER
      IMPORTING
       OUTPUT        =  RESULT.
    returncode <> 0 means skip this record
      RETURNCODE = 0.
    abort <> 0 means skip whole data package !!!
      ABORT = 0.

  • Does Alpha Conversion work in new Release(SP14-16)?

    Hi guys,
    we have problem with Alpha conversion:
    we have an InfoObjekt, which includes an alpha conversion, but error occur with data loading in BI, when we have data value like "123", it can not be converted to "000123". Instead that, an error occurs and the data can not be loaded, we have to manuell change this value and then load...
    Is this because of new release (we have this new release since Feburar 2008)?
    Any hint is appriciated.
    Regards,
    Liying

    Yes, it does work still.
    Make sure that in the infosource (transfer rule), that the conversion flag is set for the infoObject.
    matt

  • Report Selection screen variable validation

    Hi
    I have three customer selection on my report input screen. My requirement is I need to check uniqueness of those there customers during input itself.
    i.e. input for cust 1 != cust 2 != cust3. those must be distinct.
    How can I do. Please help.
    Regards
    Dolly

    CASE i_step.
        WHEN 3.
    data: wa_cust1(10),  "assuming 10 is the size of customer.
            wa_cust2(10),
            wa_cust3(10).
          READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam = 'VAR1'. "First Variable
          wa_cust1 =  wa_i_t_var_range-low.
          READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam = 'VAR2'. "2nd Variable
          wa_cust2 =  wa_i_t_var_range-low.
         READ TABLE i_t_var_range INTO wa_i_t_var_range WITH KEY vnam = 'VAR3'. "3rd Variable
          wa_cust3 =  wa_i_t_var_range-low.
        IF wa_cust1 = wa_cust2 OR wa_cust1 = wa_cust3 OR wa_cust2 = wa_cust3.
              CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
              EXPORTING
                i_class  = 'CD'
                i_type   = 'E'
                i_number = '121'
                i_msgv1  = 'Please enter 3 different customers'
              EXCEPTIONS
                dummy    = 0
                OTHERS   = 0.
          RAISE no_processing.
        ELSE.
              EXIT.
        ENDIF.
    ENDCASE.
    please use this code as it is and put ur customer size in declaration and 3 varaibles as shown above..

  • Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

    Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

    I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

  • I have a Power MAC G5 dual 2ghz that has a peculiar problem.  The monitor will not report until the machine is stopped and started 5 or 6 times.  Once booted it will restart without problem if done so from the apple menu.  Swapped out all hardware

    My Power MAC G5 has a peculiar problem.  The monitor fails to report until the machine is started and shut down 5 or 6 times.  Once it has booted it can be restarted without incident from the Apple menu.  I have swapped out all of the hardware.  Monitor, Memmory,Video Card and reset the PRAM.  After resetting the PRAM it booted on the first attempt and I thought it was solved.  But the next day it was back to starting and stopping until the Monitor came on.  Does anyone have a suggestion?  Thanks

    It could be a bad PRAM battery corrupting your PRAM.  Typically when I have monitor issues on startup it is a bad PRAM battery.
    Texas Mac Man's PRAM, battery, PMU tutorial - https://sites.google.com/site/macpram/mac-pram-nvram-cuda-pmu-battery-tutorial
    Apple's PRAM reset directions - http://docs.info.apple.com/article.html?artnum=2238
    If you have a digital multimeter you can check the condition of your present battery.  It should read at least 3.2V if it is the 3.6V half-AA battery type.  A new battery provides 3.67 Volts DC. A bad battery provides under 3.2 Volts DC.  Ideally this should be measured while the battery is under load; added recommendation from Hans777:
    >I have recently found out that an exhausted battery will still indicate >3.6 V with a high internal resistance VM.
    >
    >Checking incircuit: powercord disconnected press PMU reset button for >about 5 sec before measuring.
    >
    >Checking outside: load the battery with a 1500 Ohm resistor when measuring.
    Alternatively, test the battery while it is still in the computer.
    If the battery is more than 5 years old, especially if you totally disconnect the computer from the power regularly, or have left it unplugged for several months at one time, it is likely the battery is dead.
    Sometimes you have to do a more intensive reset of hardware management:
    [Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3|http://support.apple.com/kb/HT1939]
    [How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)|http://support.apple.com/kb/HT1436]
    [iMac G5: How to Reset the SMU|http://support.apple.com/kb/HT1767]

  • ALPHA Conversion Exit Problem

    Hi,
    I have an InfoObject ZPRODUCT1 with ALPHA Conversion Exit in RSD1 definition.In the Infosource and in the DataSource/Trans. Structure TAB when i check for the corresponding field it has some other Conversion exit called 'PRID1' and i couldn't change it.
    When i load the data i get the error at the PSA level itself and the message is,
    InfoObject /BIC/ZPRODUCT1 does not contain alpa-conforming value 80001909.
    How to fix this problem?
    Thank you
    arun

    Thanks,
      I already did that and it worked properly.
      Can you explain how come the conversion exit in Data source transfer structure and the InfoObject can be different?How did this worked?
      Will i be able to modify the Conversion exit assignment in the infoobject or Data Source/Trans. Structure TAB? How do i do this, it looks display only in RSD1?
    Thank you
    arun

  • Find report input from spool request

    hi,
    i have spool request in sp01 for some zreport output which was ran in background.
    but how can know the report input which was given by user and ran report.
    please help me out.

    Hi Jony,
    in sm37 first check the status of ur job ,
    if it is active means ongoing
    finshied means over
    if it is finished then u double click on th job
    then click on the button job log
    then u can see spool request number
    now go to sp02 and click on ur spool request number
    cheers,
    Hema.

  • InfoObject - Alpha Conversion

    We have a custom InfoObject INNUM (Invoice Number) in BW 3.0B.  It is defined as CHAR 10.  Many of our customers send invoice numbers with leading zeros.  We need to store and retrieve these invoice numbers as sent.
    Unique invoice numbers are as follows:
    123
    00123
    0000123
    I have tried 2 options:
    With ‘Alpha Conversion’ the numbers are padded with leading zeros to length 10.  They can then be retrieved and displayed as ‘123’, without any leading zeros.
    Without ‘Alpha Conversion’ the numbers are padded with leading zeros to length 10 but can only be retrieved by searching with all leading zeros in the search string (0000000123).
    Is the Alpha Conversion functioning as advertised?  Is there a way to store, retrieve, and report on the invoice numbers as sent by our suppliers without adding leading zeros?
    Best regards,
    Mike

    It depends on the realeases: in fact to Upgrade to 3.x it was NECESSARY to carry out a massive ALPHA Conversion (so as to remore previous conversion errors). A BW installation born in 3.x (not Upgraded from 2.x) could still have some APLHA problem.
    With Aplha it seems to work right (from what you say), without NO! Without Alpha if you store the follwing values:
    123
    00123
    0000123
    each of them sholud be retrieved ONLY with the necessary leading zeros (so 123, 00123, 0000123) ... You say that "can only be retrieved by searching with all leading zeros in the search string (0000000123)": this is unusual. In fact if you store 123 on a CHAR 10 InfoObject you will see in S Table /BIC/SINNUM the same value "123" and NOT "0000000123". When attempting with NO Alpha Conversion did you deleted the InfoObjects value?
    Hop it helps
    GFV

  • Removing Alpha conversion routine

    Hi All,
    We have an object which was created with alpha conversion routine and master data is alredy loaded to the same.
    Will there be an impact if we remove the alpha routine from the object now. Will this cause any data inconsistency?
    Thanks
    Jeevitha

    Hi,
    Check with the following programand implement it in TransferRules/Transformations.
    REPORT  ZALPHA_INPUT.
    DATA: ZI(18) TYPE C,
          ZO(12) TYPE C.
    DATA: ZS(12) TYPE C,
          ZR(18) TYPE C.
          ZI = '000000099999889925'.
          ZS = '099999889925'.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT         = ZI
       IMPORTING
         OUTPUT        = ZO.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          INPUT         = ZS
       IMPORTING
         OUTPUT        =  ZR  .
    Write:/   ZI.
    Write:/   ZO.
    Write:/   ZS.
    Write:/   ZR.
    Thanks
    Reddy

  • Customer Alpha Conversion

    Hi All,
    I have customer ID's being used from sales data(DataSource ), GL data (Attribute of 0PROJECT), Cost for Controlling (Routine which picks the same table of 0PROJECT).
    I have checked this table /bi0/PProject here I see the customers having values such as 00000R1010, 00000R4000 when these should be R1010, and R4000.
    0CUSTOMER is a CHAR 10 Field with ALPHA.
    Customer numbers with just numeric values are correct while customer numbers starting with charecter i.e. (R) is having the problem.
    All suggestions are appreciated.
    Kind Regards
    James

    hi,
    The Alpha conversion will only work for Numeric values, for Alpha numeric values it does not do anything.
    The data in IO 0PROJECT is being loaded from the R/3 system and the values itself are coming with appended zeros in the beginning. You can write the ABAP code in the transformation to 0PROJECT to delete the leading zeros while loading customer values in 0PROJECT.
    SHIFT CUSTOMER LEFT DELETING LEADING '0' .
    This will delete leading zeros and store values in 0PROJECT as R4000
    regards,
    Arvind.
    Edited by: Arvind Tekra on May 4, 2011 7:46 AM

Maybe you are looking for