Problem Granting access on Business Area to Role

Hello everybody,
I am trying to grant access on a Business Area to a role but when I try to do so, the role does not appear in role list. It only shows role connect and resource.
The version of Discoverer I am using is 10.1.2.
Anyone has the same issue?
Phil
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Similar Messages

Revoke access to Business Areas while loading data

Hi,
What is the best practive to restrict access to business areas (or entire EUL) while data is being loaded?
Currently users could use Discoverer to query the tables being loaded. What would be an efficient way to make sure they are not able to query the database while loading the data? We load using OWB (PL/SQL).
Thanks,

Hi
In the first step of your data load revoke select rigths from your eul and in the last step grant it back.
Ott Karesz
http://www.trendo-kft.hu

Problems viewing folders under business area

Hi:
I am using 9i Discoverer. I created a business area with the Administrator and granted access to the public. However, when I log on as a user using the Desktop I can only see the business area in the list box but no folders are shown in the available window. Any idea? Thanks.

Well I checked previous postings and found somebody suggested refreshing the business area. When I first tried it I got the business area displayed but not the folders. I then refreshed it again and was able to see the folders too.

Any problem if we use Business area concept other than Profit Centr

Hi,
what are the problems and difficulties if we use Business area concept other than Profit Center.
Kindly give me brief deatils,,,will assign points
thanks
Sap Guru
kischowdary*gmail.com

Hi:
Business area will not be supported by SAP in the future
The problem of splitting of account balance is more pertinent in case of tax accounts.
In month end procedures, there are big problem in reconciliation.
Not Efficient in Reporting.
SAP Recommends Profit Center Accounting instead of Business area
Please let me know if you need more information.
Assign points if useful.
Regards
MSReddy

Problem in changing the Business Area?

Hi,
I have a discoverer report where the eul folders are in one business are. Now I need to change the business area. By manage folder option I can do that.
Now my query is as the business are is changed for the folder what should I do for the workbook. Do I need to recreate it because the business area definitions are changed.
Could anyone please help....
Thanks

Hi,
You don't need to change the workbook at all. However, make sure the business area security is correct so that the workbook owner can still access the folder. The workbook references the folder and so the folder will be shown in the new business area when you inspect the workbook items.
Rod West

Problem while changing Business Area in Cost Center Master Data

I am having a problem while changing the Business area in cost center master data, the system does not allow to change the business area due to the following reasons;
1. The transactional data already exists for that cost center
2. The desired date required to be changed, falls between analysis period 01.01.2000 to 31.12.2999
Can anyone help me in order to reslove this issue
Thanking in anticipation
Edited by: Arshad Iqbal on May 24, 2010 2:10 PM

Dear Dejan !!
Thanks a lot for resolving my problem actaully i have tested the scenario in Testing Server by changing the fiscal year and the system allowed to change the business area before any transactional data posted.
Thanks Once Again
Regards
Ch. Arshad Iqbal

Having Problem in access to Source Code Control System (URGENT help needed)

I am using JDeveloper 9i first time. The repository is in Oracle 8i.
I have established a connection from JDeveloper 9i to Oracle 8i repository running on Sun Solaris.
We have created a shared area and my colleague have checked-in some files. I have all access to shared area and I can see the checked-in files, but I am not able to check-out to the local folder.
I need help to resolve this problem urgently. Please consider this as an SOS call. Thanks

Hi,
The JDeveloper help system strongly recommends that you don't use shared workareas in this way. In fact, it's not possible in the beta release of JDeveloper to work this way at all, because there is no way for you both to get the files on to your file system in a way that JDeveloper will recognize.
The JDeveloper documentation on Repository is a very good source of information on the best way to organize developer workareas (particularly the section on best usage recommendations). The Repository is a very complex product originally intended for much more than just source control and there are many ways of using it. We have necessarily had to focus on a subset of this functionality in JDeveloper, mainly to keep the UI from being excessively complex for new users.
Here's a summary of the way we recommend working:
o Create a workarea in the RON which will be used as the basis of developer workareas (developers will not actually use this workarea directly). Make this workarea shared by granting access rights to the PUBLIC role.
o Each developer uses the Workarea wizard in JDeveloper (Source Control->Configure... in the beta release) to create a developer workarea based on the shared workarea.
Thanks,
Brian
JDeveloper Team
null

SQL to retrieve business areas, users and their reports?

Hi,
I've been able to retrieve by sql, users and their reports or business areas and thier users, but I'm unable to retrieve business areas, users and reports in the same sql.
I've been looking in eul tables without success. I guess someone has already done that?
Thanks

Hello
The problem you have is that you are trying to mix objects that don't go together.
As you have already determined, you can have a script to query users who have access to business areas, and you can also have a script to query users who have access to or own reports. However there is no link between business areas and reports.
Discoverer reports are validated against folders, not business areas. If a report uses 2 folders and there are 10 business areas that contain those folders which business area do you think the report was written against? The answer is none of them. You just happened to have a business area open at the time the report was written but truthfully you could have used any of them. Therefore, if a user reopens a workbook that uses folders found in multiple business areas, Discoverer will default to the first business area by name that contains all of the folders used and that the user has been granted access to.
Hope this helps
Best wishes
Michael

I can't see my own business area

Hi!
I have a big problem because I can't see my own business area in Discoverer Desktop. I'm the EUL owner and I have all the privileges grant, I don't know what happend with my business area.
When I create a new user to access the business area, this can work in a good way, but when a I try to access to the Business Area with my id this is not available for me. What can i do?
Please, somebody help me...

Hi!
I have Discoverer Administrator Oracle 9i DS Release 2 and Discoverer Desktop Oracle 9i Ds Release 2, and this Discoverer Desktop is the same to the other users.
I have DBA privileges in the Database and all the privileges grant in the Discoverer Administrator.
I don't understand what happend to my business area, please help me

Business Area for Vendor Line Items during Payroll Posting

Dear All
We are in ECC 6 version of SAP. We are using Business Area for Internal Financial Statement. We are facing a problem with regard to Business area in Payroll posting. Business area does not appear in vendor line items when we make posting of payroll for multiple business area. We have setting technical accounts for HR. We read SAP note 203276 and it seems that it is possible. Can someone tell us what is the reason that business area not coming in vendor line item while payroll posting.

Hi
That part we have already done. The problem only come when we run payroll and there are vendors belonging to several business area in that case system keep the business area field blank. In case if we set field status required system give error. That is why we run payroll by each business area we also have maintained technical account for 1001.
Regards

Customisation for business area in vendor balances

Hello friends,
what is the customisation tht needs to be configured to make business area option available in dynamic selection tab in vendor balances report like f.42
I want to show business area wise vendor balances report.
Pls let me knw the path to do it.
Thanks
Sunny

I am also facing the same problem. I need business area wise vendor balances. However as a temporary solution, I have used
S_ALR_87012079 - Transaction Figures: Account Balance for the business area wise transactions to ascertain the business areawise balances.

F.27 to be run by Business Area

hi,
I need to run f.27 by business area, how to do this.
sugesstions required.
sudha

As there are no user-exit, and you don't want to duplicate the standard (You have already performed an upgrade project ?)
You only solution is to divert a field of its standard use to fill it with Business Area.
But, problems arise when
- GSBER (business area) is not in the view VF_DEBI used by the trabsaction
- None of the parameter "divertable" is in BSEG
Actually i fear that you have to build a specific report that select data per your need, and then submit report SAPF140 (look at END-OF-SELECTION block in RFKORK00)
Regards

F.27 by business area

hi,
I need to run f.27 by business area, how to do this.
sugesstions required.
sudha

As there are no user-exit, and you don't want to duplicate the standard (You have already performed an upgrade project ?)
You only solution is to divert a field of its standard use to fill it with Business Area.
But, problems arise when
- GSBER (business area) is not in the view VF_DEBI used by the trabsaction
- None of the parameter "divertable" is in BSEG
Actually i fear that you have to build a specific report that select data per your need, and then submit report SAPF140 (look at END-OF-SELECTION block in RFKORK00)
Regards

Assignment business area

hello all,
the scenario is my client has 2 plants and one gl account for both and they want to see plant wise report and i had created business area for all plants which can be assign to all income and expanse accounts through primary cost element. but the problem is ican see business area wise gl report for one plant only , is it possible to assign two cost center in one gl account.each cost center is linked with different business area.i think i cannot be possible.
suggest.

Hi
Assigning more than one cost object to a document is possible but assignment of two cost centers to the same document is not possible.
Because when two cost objects are assigned to one transaction one cost object will receive the real posting and the other will have the statistical posting.
In your case assigning two cost cnters to the one line item is not possible.
Hope this helps
Good Luck
Hari

Problems using Role for Security to business area

I have a role set up with several users in it. User A and user B are both in this business area. When I grant access to a business area using this role, they are unable to see the business area in the user edition. If I specify User A to the business area they can see the business area. This does not seem to happen all of the time. Any solutions for this ?
Has anyone else come across it ?
Thanks
Dennis

You could try this- Tools -> Priviliges -> (Show Privilege for the ROLE not the USER), then see if "Desktop & Plus Privilege" is checked
I was just creating/removing EUL's in my test instance and the same thing happened to me.

Problem Granting access on Business Area to Role

Similar Messages

Maybe you are looking for