Adding custom table

Hello,
The goal is to add a table where some custom parameters will be stored in order to speed up custom SQL queries.
Is it allowed/recommended to add a custom table to the HDS database?
Is it possible to add a table to the CUIC database? Is it possible to access the CUIC database?
Thanks,
Justine.

I would not add any tables to the HDS DB, pretty sure it's not supported. As for the CUIC database, I don't think you have access to the actual DB itself. Why don't you just build the table in another DB and create a new datasource in CUIC to pull data from this table?
david

Similar Messages

Problem in adding custom table's field in MM46

Hi,
I have a complex requirement of adding fields of custom table in MM46 for mass maintance.
I did most of the part but dont know what is missed.
Steps that i followed
1. used tcode MASSOBJ- I Added Ztable name to application table for Object type - BUS1001001.Here i dont know what to provide in other attributes of entry example Number, DB table etc. [SCREENSHOT OF MASSOBJ|https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
2. Used tcode OMSR- I added entry of Ztable'field here i gave selection group as 211, maint status as KDEVALBQPSZXCFG
alv group- blank. [screen shot of OMSR |https://plus.google.com/photos/114088763388693559922/albums/5704943614516268609]
After doing these steps Table name and field of table is visible in mm46. But problem is Field is not editable that is in display mode only.
Pleae see this snapshot - [error image|https://plus.google.com/photos/114088763388693559922/albums/5704938582830478801]
Please help me by telling what i missed and am i adding right attributes for entries in MASSOBJ AND OMSR?
Thanks.
Waiting for expert's comments.
Reagards
Rahul
Please do not use words like 'urgent'
Edited by: Rob Burbank on Feb 3, 2012 11:31 AM

Hi Rahul,
Wellcome to SDN. Perhaps you know it, and although it's for older releases, perhaps it could help you. Please, see SAP Note 381942 - Mass changes for logistics data in the article master.
I hope this helps you
Regards
Eduardo

How to manage data in a custom table added in SBO?

Hello,
I'm developing a addon for one client that needs to control an aditional step, after each Invoice is posted.
Since SBO does not allow me to add additional fields to Invoice header table (OINV), I thought to add a custom table to SBO database to control the process for each Invoice (simple table with 2 columns: DocNum to hold the Invoice number, and Status to keep track if the Invoice was processed or not).
When I added a Custom Table in SBO and checked the table definition in SQL Manager, I found that SBO added automatically 2 new columns (Code and Name).
Since the PK is defined at Code column (and not the DocNum has I wanted), I found that it not very handy to manage data (insert, delete & update) with this table definition.
I tried to find a DI object that could manage easily the data of this table type but had no sucess.
Then I thought in adding the custom table directly in SQL Manager, and manage it directly with Recordet objects.
However this seems not a standard process to manage data since it interacts directly with the DBMS, which can be dangerous...
Is there any way or DI object to manage this custom tables added in SBO?
Thanks all!
Manuel Dias

Hi Manuel,
What do you mean by SBO does not allow me to add additional fields to Invoice header table (OINV).
Have you tried it add a UDF to OINV,if so what is the exception you got while adding.
If you Have not tried Use the following code to create.
Dim oUserFieldMD As SAPbobsCOM.UserFieldsMD
        oUserFieldMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
        If (Not isColumnExist(TableName, ColumnName)) Then
            oUserFieldMD.TableName = "OINV"
            oUserFieldMD.Name = ColumnName
            oUserFieldMD.Description = Description
            oUserFieldMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
            oUserFieldMD.EditSize = Size
            (objUserFieldMD.Add() )
        End If
if the field is added successfully.
Then open the Invoice screen and goto View menu and click on user defined fields then it will show you one form which contains the field you added,
You can access this field using DIAPI of Invoice object
regards
Vishnu

Adding button to a custom table cell (and handling them)

Hi
I'm wondering if it's possible to add a button on each row of a table view using a custom table cell view. If it's possible, I'm really wondering how I can handle the click events on these buttons.
Thanks

No.
Try creating a view and adding it to a cell. Let us know what problems you have, and we can try to help.

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Adding custom fields to DB table

Hi,
I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table, I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
It should be done in easy way but not able to get breakthrough.
Please let me know your suggestions.
Thanks

Hi Sai,
Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
After that, try deleting the local object and adjust the table using SE14.
If still it does not work, ask your BASIS consultant to do an "Alter table".
May be that works!
Thanks & Regards,
Anshumita.

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Adding Custom Fields to BSEG and BKPF Tables

Hi All,
My customer would like to add around 5 fields to BKPF table and 6-7 fields to BSEG table. Can you all suggest me whether it would be a good idea to add any custom field to these tables ? I would like to mention that standard fields available in these tables will not be used for the requirements of the customer and he is insisting on adding custom fields. I need your expert advice on this matter.
Regards,
Rohit

Hi Friend,
Please do not add any custom fields in those tables.
These two tables are pillar of accounting entries in SAP, if you want to push them then it is OK, otherwise find some other way.
Regards
Krishnendu

Adding a customer table (e.g zcust) to a transaction

Hi,
A limitation i EEW is that you can not add a customer tables to a transaction (maintainable in transaction CRMD_ORDER) as one can do to a business partner (maintainable in transaction BP). Does any one know how to accomplish that with out EEW.
KR
Jan

Hi,
I have worked on a similar scenario where I added a table conttrol on the custom tab at contract line item.
As you already have a custom screen, please follow the following steps;
1. Create a new global internal table (git_cust) that corresponds to the your custom table.
2. Create a table control on the custom screen and link that with the global internal table (git_cust).
3: populate git_cust in the PBO of the custom screen with data of current transaction.
4. Use statement
LOOP at git_cust INTO wa_cust WITH CONTROL contrl.
to fill table control with data from the internal table.
5. In PAI, use
LOOP AT git_cust.
chain
endchain
ENDLOOP.
to update the internal table with the modified data.
6. Create a subroutine (subX) that should be called on commit. In this subroutine, update the custom table with data in the internal table.
7. Create a function module and link it to 'SAVE' event for object ORDERADM_H. In the function module, call the subroutine (subX) on commit.
These are the basic steps required. Please letme know the specific requirements so thatI can help you point by point.
Regards
Kaushal

Adding new field in customized table ZPM_QMEL_EXT

Hi all,
My requirement is to add a new field in ZPM_QMEL_EXT table numeric field no of months due (ZZ_CO_MON_DUE) .
Its value will be calculated as the # of invoices that were paid vs. what has not been paid and then from there, value of this field will be fetched.It has to be populated during the time of notifcation screen entry (iw51). The logic will be similar to this
SELECT FAEDN FROM DFKKOP INTO TABLE IT_DU_DT
                              WHERE GPART EQ WA_QMEL-KUNUM AND
                                    VKONT EQ WA_QMEL-ZZ_VKONT.
    SORT IT_DU_DT BY FAEDN ASCENDING.
    READ TABLE IT_DU_DT INTO WA_DU_DT INDEX 1.
    MOVE WA_DU_DT-FAEDN TO DUE_DT.
    CALL FUNCTION 'HR_MONTHS_BETWEEN_TWO_DATES'
      EXPORTING
        I_DATUM_BIS = SY-DATUM
        I_DATUM_VON = DUE_DT
      IMPORTING
        E_MONATE    = NO_MT.
    IF NO_MT IN P_DU_MT.
      WA_QMEL-DUE_MONTHS = NO_MT.
Awaiting your kind help .
Thanks
hariom.

Hi,
There is only one option to include extra field for standard tables that is Append Structure other than we don't have any option.
For Customizing tables we can use Append structure as well as Include Structure.
Rules: Append Structure should be in last in Field column but include structure you can insert in any where it means between the fields.
Delivery class option and data class will take care automatically while upgrading the sap system one version to Another version.(upgrading).
For that you should maintain the those properties when data base table creation.
i hope the above information may helpful to you.
Best Regards
Sreenivas Pachva

Prompt for transport request if records are added/modified for custom table

Hello Experts,
A couple of questions,
1. How do we prompt user to create a TR whenever he changes a record in my custom table
via SM30? my custom table has a maintenance type of 'C' - customizing already.
2. How do we transport the custom table contents to another client?
Thank you guys and take care!

Hello
Regarding (1) just have a look at a standard maintenance view like V_T001W (SE11 -> menu Utilities -> Table Maintenance Generator ):
Here you can see that the option Standard Recording Routine is chosen which is responsible for prompting for a transport request as soon as records of the table/view are changed.
Regards
Uwe

Adding custom fields to Embedded Search

Hi All,
I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
Many thanks,
Luke

Hi Luke,
I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
It would look like this once selected
OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
Hope it helps!
Regards,
Ricky Shah

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

"500 internal server error" after adding custom fields to Address page

I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
we also extended the Badi HRPAD00INFTYUI
custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
we get the following error:
"500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
"Area8" is one of the custom fields we added in PA0006 (Address infotype).
any idea what is wrong? maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
T.

Hi Sasu,
Its clearly saying contect binding error. Have you mapped correctly from FcComponent to VcComponents.
FcCompoenets for Model logic.
Check the mappings correctly.
If it is complete custom or new field then there will be could of steps.
1) Reimport the model
2) map new field to FcComponent
3) Bind new Fields from Fc to Vc
Rgds
-SS

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Adding custom table

Similar Messages

Maybe you are looking for