Problem in calling a Panel while calling a cell in a JTable using Mouse.

Hai there
I am working in swing and trying to create an application that is displaying data using Table. Now, I have a requirement where in upon click on one of the column in the table i wish to display a panel which contains JTable. I am unable to get this functionality. The same functionality is successfully handled if i call it from a text field instead of a cell in JTable.
Can any one suggest what the error could be??

What data are you wanting to display in the JPanel? You can have the setColumnSelectionAllowed() method to true and that will allow you to select a column. Then you can use the getSelectedColumn() method to get the column number, then get all the row data for that column using the getValueAt(int row, int column) method and load it into your JPanel anyway you choose.

Similar Messages

Speaker crackles while calling firmware 2.2

Have any of you had a problems with a crackling noise while calling since the 2.2 update?
I think I have this problem since I've updated to 2.2, but i'm not sure.
I do not have the crackling sound when using the "speaker" function so it probably isn't a problem with the cellular network.

Try the following troubleshooting steps:
Hard reset - press home and sleep/wake buttons simultaneously until the Apple icon appears (ignore the red slider).
Restore in iTunes to a backup.
Restore as "New iPhone"
If it still happens there is a defect in your phone and you need to take it to an Apple store Genius Bar.

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
iphone 4
SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using
hope will never return. Thanks

We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Problem while Calling a CGI pgm From Java with code sample

Hey guys,
I am calling a CGI program from java servlet, while calling cgi program I am passing encoded(Base64) content via post process,
My problem is the encoded data is not posted as expected, the encoded data is corrupting. But when I send encoded data in a text file, cgi program is perfectly decoding and working fine.
Here I am doing Base64 encoding as per requirement, I cannot avoid this encoding.
My doubt is about OutputStreamWriter constructor argument , In OutputStream Constructor I am passing one argument is OutputStream object and another argument is encoding type. I tried with ASCII, US-ASCII & UTF-8 .
My code is as follows, please help me to resolve this issue.
URL url = new URL("CGI server path");
URLConnection urlConnection = url.openConnection();
urlConnection.setDoOutput(true);
OutputStream os = urlConnection.getOutputStream();
BufferedOutputStream buffer = new BufferedOutputStream(os);
OutputStreamWriter writer = new
OutputStreamWriter(buffer, "US-ASCII");
writer.write(encodedPDF-Content);
writer.write("\r\n");
writer.flush();
writer.close();
here encodedPDF-Content is String and it's size is 9565 bytes

Whenever you read something in java into string (with Reader implementation) it expects source to contain text in encoding you specified. It then decodes it and makes 16 bit unicode string from it. Whenever you store string using Writers it does reverse operation with specified encoding (may be different than this which you used to read source) and stores text as a sequence of bytes made of 16 bit unicode string. So, passing text back and forth between programs with the help of files or I/O you can make mistake at both reading and writing encoding. Check for it.
Now, when C programm or other application reads file it may take another assumptions about encoding or may even completly ignore it and read source as a binary file. Then, if you have a source text as a file and have to pass it to other application never do it using Reader/Writer. User raw InputStream/OutputStream instead what will preserve all information unchanged.
here encodedPDF-Content is String and it's size is 9565 byteHow id you get this info? String.length() gets you how many chars is in it, it will be half the number of bytes. If you see your input file beeing 9565 bytes long, see my above statements.

Problem while calling the FM FP_JOB_OPEN

Hi All,
I have a scenario where i need to attach multiple Forms(Adobe) to a work flow container.
While calling the FM 'FP_JOB_OPEN', i am passing the required parameters as below
wl_outputparams-nodialog = 'X'.
wl_outputparams-connection = 'ADS'.
wl_outputparams-dest = 'LP01'.
wl_outputparams-getpdf = 'X'.
the problem is that i get a Print preview pop-up even though i pass Nodialog = 'X', and more over after calling the actual Form function module the resultant parameter 'fpformoutput-pdf' is only filling up only after i process the print preview dialog and see the preview. other wise the field 'fpformoutput-pdf' is blank.
as i need to do this work in back ground(for work flow background step) i do not want the print preview pop-up window.
can some one help me in this regard.
PS. For multiple forms i tried calling the form functions modules in between every FP_JOB_OPEN n FP_JOB_CLOSE
as well as a single FP_JOB_OPEN and calling the multiple form function modules and FP_JOB_CLOSE.
thanks in anticipation .
Srinivas

@koolspy
Yes, i did specify the settings in the o/p options.
in addition to this, after debugging i could able to see some issue when calling form name via FM 'FP_FUNCTION_MODULE_NAME', in this FM it is appending '_IN' to the generated FM name and trying to check for existence check, obviously there wont be any FM as it is appending '_IN' to the generated FM.
but when calling the generate FM after FP_JOB_OPEN it is throwing sy-subrc = 1, which is Usage error.
Why is it behaving weirdly, is there any thing i am missing while calling the Form?
please help as this is on high priority
thanks
srinivas

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

Problem in getting the current value of the drop down while calling value change listener

I have 2 drop down list. I am trying to get the value of first drop down from other drop downs value change listener. Initially one drop down contains a default value. First time I got the value while calling the value change listener. But if I change the default value to other in the first drop down and call the value change listener of the second drop down then I got the old value in the bean. Can anyone suggest a process

If I use the following code it gives me the current index.
            valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
            System.out.println(valueChangeEvent.getNewValue());
This is also giving me current index.
BindingContainer container = BindingContext.getCurrent().getCurrentBindingsEntry();
AttributeBinding attrIdBinding = (AttributeBinding)container.getControlBinding("PersonTypeId1");
if(attrIdBinding.getInputValue()!=null)
               System.out.println(attrIdBinding.getInputValue().toString());
But at last I got some help from Shay Shmeltzer's Weblog.
BindingContainer bindings =
                BindingContext.getCurrent().getCurrentBindingsEntry();
                // Get the sepecific list binding
                JUCtrlListBinding listBinding =
                (JUCtrlListBinding)bindings.get("PersonTypeId1");
                // Get the value which is currently selected
                Object selectedValue = listBinding.getSelectedValue();
                  long value =0L;
                if(selectedValue!=null){
                    System.out.println("Sudip.. Person Type using bindings"+selectedValue.toString());
But this returns "ViewRow [oracle.jbo.Key[300000860721156 ]]"
300000860721156 is the original value.. Would you please help me to figure it.

Nokia 5230 - problem: SILENT while calling!!

Hi!
I've been using my nokia 5230 about a month. Recently i'm faced with a very annoying problem:
When i call somebody or receive a call the phone gets SILENT. That means i don't hear the voice whom i'm calling (or who is calling me). But the person whom i'm calling (or who calls me) hears my voice. This problem doesn't appear every time but occasionally. I've the latest firmware on my phone.
I'm really frustrating about it. Imagine you get an very important call and your phone doesn't work properly.
I'm very thankful if somebody can help me!
Solved!
Go to Solution.

Thanks.
I had the exact same problem.
I did a full backup using the updated OVI suite, and then followed your directions:
back up all your data first type in *#7370# security code is 12345
It performed the reset, but I could still not hear callers using the handset; my volume is turned all the way UP.
The speaker phone works fine, and music plays fine, the only problem being I am unable to hear a caller through the phone unless I turn it on speaker.
Do you have any other suggestions?
Just an FYI for others; after the reset all text messages were wiped out. When using the RESTORE function on the updated OVI suite, NOT all of the text messages that were backed up were restored.
Thank you.

Problem while calling smartform in webdynpro

Hi Experts,
I am calling a smartform in webdynpro abap. It was working fine in development server. I have ported the same request to Quality Server, there it was not working.it is giving sy-subrc = 1 and it is displaying a blank screen
I m following the following steps for calling smartform in webdynrpo.
I am calling the smartform by
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM_NAME'
importing
fm_name = fname
exceptions
no_form = 1
no_function_module = 2
others = 3
if sy-subrc 0.
Error MESSAGE
endif.
call function fname
exporting
control_parameters = lv_control_parameters
output_options = lv_output_options
user_settings = space
pernr = stru_input1-zpernr
reinr = stru_input1-zreinr
pdvrs = stru_input1-zpdvrs
importing
job_output_info = lv_ssf_output
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5
if sy-subrc 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
But it is not passing otfdata and it is returning 1 in sy-subrc.
Please help me to solve this issue.

I m not using any image.
I have checked through debug and the function module is not transfering any file to OTF table.
Please suggest me..
Edited by: zakirriyaz on Nov 4, 2011 9:47 AM

Problem while calling PDF file from java

Hi,
In my Java standalone application i need show PDF files.
By using following code I can be able to show PDF files.
String theUrl=""//location of the
Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + theUrl);
This is working fine with Acrobat 5, Acrobat 6 and Acrobat 7.
But problem with Adobe Acrobat 8
Cant be able to show PDF files using the above code.
Please help me to resolve to this issue.
Thanks & Regards
TKR

I have the exact same problem as TKR. How do we fix the problem so ADOBE 8.1.2 will work for PDF files?

Error while calling utl_dbws.create_service

hi,
i get following error
"ORA-29541: class SYS.oracle/jpub/runtime/dbws/DbwsProxy could not be resolved"
while calling a webservice from utl_dbws.create_service
Can any on help me.
kiran

Done That,
Thanx a ton Dave, it worked.
So I am finally moving on :-)
Just one question Dave, I happened to work on the Beta release of this version too, the problem was not there. How come we have been able to get it in dev preview.

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

Problem in my MacBook Pro Video Calling in Facebook

I have problem when trying to start video calling in facebook, it always says "The video calling software encountered an error while starting."
and it's very annoying because I can't use video call on facebook.
I tried to follow instructions on how to uninstall video calling in facebook and I've tried to follow this instructions in
https://www.facebook.com/help/247662461917444/
For Mac OS X:
In the Finder, go to your Home directory which is labeled with a house icon and your username.
Open the Library folder.
Open the Internet Plug-Ins folder.
Delete the FacebookVideoCalling.bundle file.
When I tried to look for the said file, it is not inside the Internet Plug-Ins folder.
Is there any problem with my mac? I am using MacBook Pro mid 2012, 10.8.3
I hope someone could help. Thank you.

Have you enabled the service yet? Here's a link to enable it on 10.7:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Should be much the same.

Problem in calling a Panel while calling a cell in a JTable using Mouse.

Similar Messages

Maybe you are looking for