Problem in CFL Title

Hi All,
I have a problem in the CFL.
1. I have set an object Type 20 ( oPurchaseDeliveryNotes)  for getting a List of Goods Receipt details in the CFL in that  for status column it shows the heading as Qty how to change Heading as status.
2. I have set an object Type 59 (oInventoryGenEntry)  for this CFL i am getting the title as 'List of Goods Receipt' as same as for  oPurchaseDeliveryNotes how to change the title for this.
Thanks in Advance,
Madhavi

Hi David,
I created a new object for the cfl form and gave the object no to the form but not getting the result. The code i used follows:
Private oFormCFL As SAPbouiCOM.Form
Inside the CFL Function:
      oFormCFL = SBO_Application.Forms.Item("10058")
      oFormCFL.Title = "List Of SubContract"
Madhavi

Similar Messages

  • Problem in CFL

    Hi,
    I have a problem in CFL. I am taking the GRN No in the CFL. If i choose the GRN No automatically vendor code and item code should display to the particular GRN No if i choose from the CFL its displaying correctly in the text fields. But instead of going to the CFL screen if i type the GRN No in the GRN No text and press tab its not taking the correct grn no.
    For GRNNo i am setting the Docnum to that field so while choosing its mapping the docnum correctly to the GRN text field. if i type the GRN No and press tab means it is not mapping correctly.
    for example:
    I want to inspect for the GRN No 314 so i am typing it in the text and press tab. i want the record for docnum 314 but when i press the tab it changes to 4 and taking the details of docnum 4. For docnum 4 the docentry is 314. What happens is if i type docnum 314 and press tab its taking docentry 314 and gives the details for docnum 4.
    What i want is if i type 314 docnum it should not change to 4 i want the details of 314 docnum itself how to solve this problem.
    Regards,
    Madhavi

    hi,
    I used the following code plz verify it and tell where i go wrong
       val = oDataTable.GetValue(1, 0)
                                        val1 = CDate(oDataTable.GetValue(10, 0)).ToString("yyyyMMdd")
                                        If (pVal.ItemUID = "txtgrnno") Then
                                            Dim oDS As SAPbouiCOM.DBDataSource
                                            oDS = oForm.DataSources.DBDataSources.Item("@PSSIT_NQCHDR") 'add your dbdatasource here
                                            oDS.SetValue("U_grnno", oDS.Offset, val)  ' val1 is the value you are setting
                                            oDS.SetValue("U_grndate", oDS.Offset, val1)
                                        End If

  • Problems with the Title Option in Adobe Premiere

    I am having a problem with this option because when it shows the title panel, it is very incomplete; it doesn't have as many option as it had before, such as color or shape options. It started happening when I tried to blur our somebody and pick an hoxigonal shape from the panel and a sign showed up saying that there was a problem and then the program would shut down and wouldn't open later on unless I restarted the computer. Now, it opening without any problem but the title panel is still very basic.

    What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
    For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
    If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • Problems sending mail-titles of Billing docs to the same Sold-to-party

    Problems with mail-titles in sending Billing documents to the same Sold-to-party.
    If we send, by using VF04, different Invoices to the same Sold-to-party, we expect in the mail-title not always the last Invoice (XVBRK-VBELN).
    Mail-title: Invoice &XVBRK-VBELN& (your ref. &VBRK-BSTNK_VF&)
    In transaction SOST we see:
    Invoice 900014179 (your ref.)
    Invoice 900014179 (your ref.)
    The result should be:
    Invoice 900014178 (your ref.)
    Invoice 900014179 (your ref.)
    How can we solve this problem ....

    Hello,
    You have this problem sending via external mail?  If yes, had collegue with same problem & as I understand here's what was done to solve:
    -- in output condition master set dispatch to be via scheduled job (previously had been immed) -- trans VV31 or VV32
    -- set up the job itself -- trans VF31
    I've not tested myself, but maybe you could try in your dev system to see if it works.  Good luck

  • Problem in displaying title in smartform

    hi all,
    I m developing a smartform in dev server. While i m directly checking the output by executing smarform i  able to see the main title ( hard coded in title window, with no condition, font size 16, bold, arial) .
    While i test the same in testing server, its not showing the main title.I asked the Funtional Consulatant to chk for the configration but as per his comments everything is ok.
    Apart from this, rest all other windows are dispalying properly.
    Can anybody guess where might be the problem.
    thanks

    hi
    r u uasing any language for the text elment or text module.. i think u r giving the language dynamic based in the SPRAS or customer Language. may be the text is not existed in that language,
    ru givung the language as 'EN' or u r giving it in any variable &Language&
    if u r uisng any varaible then once check whether the text is avilable in that language.

  • Problem in JavaScript - Title missing for showmodel dialog

    Hi All:
    I have a problem to get the tilte in a model window. Here is the problem in detail
    My application is in struts. I have a home page which is a JSP and opening a modalDialog one(screen1) using showModalDialog(An action forwarding to a jsp). from there(screen1) I am again opening another modal dialog(screen2) using showModalDialog(another action forwarding to a jsp).
    The problem I have is I am not able to get the title for the last window that is screen2 even though I am giving title tag in that jsp as <TITLE>Model Dialog</TITLE> as like others. Its not coming only the screen which are coming in 3rd level like screen2.
    I am using IE6 browser, its working in IE7 and firefox. But I need to make it work in IE6.
    Can any body help in this problem.
    Thanks

    In my previous answer i mentioned composer parameters actually they are the output option which u've alreeady passed.
    also u set this value
    MOVE space TO wa_control-preview.
    this sap help will also help u
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/6243ea8a4111d4b605006094192fe3/content.htm
    Edited by: kartik tarla on Jan 17, 2009 10:11 AM

  • IDVD problem with "Show title and comments"

    I am making a DVD for a neighbor. He has given me CDs with scanned old slides. He has over 1000 photos.
    I've got the DVD made in iDVD and everything is fine except in one of the slideshows.
    In iPhoto I have 22 albums of photos. When I'm in iDVD I go to "media" and I drag an album into the theme. After it is there I drag another album into that album I just drug. So what I'm doing is combining 2 albums into one slideshow thus having 11 slideshows in my theme. I then go into each slideshow while in iDVD and add music and go to "settings" and unclick "Show title and comments".
    After I have completed this for all slideshows I watch each slideshow before burning and everything looks fine. After the DVD burns (which takes 5 hours) I again watch the DVD on my television. In the first slideshow, and only the first slideshow, the first half is fine and then when it comes to the pictures that were in the second iPhoto album that I drug in the titles of each photo are coming up on the screen. All of the other 10 slideshows that I combined are just fine.
    I pitched the first DVD and tried to fix this by going into iPhoto and making a separate album that had all the pictures of thos first two initial albums. I then went into iDVD, deleted that problem slideshow and then added the slideshow that I had combined all the photos into that one album. I again make adjustment adding music and going into "settings" and unclick "Show title and comments". I watch the slideshow while in iDVD and everything looks fine.
    I burn another DVD and when I watch it on my television again that first slideshow has the first half of the pictures just fine and then the second half are showing the titles of each photo on the screen.
    Everything else in the DVD looks fine.
    The only other thing that might be of importance is when the DVD is ejected from the burner the screen says:
    "Current Operation"
    "Image Incomplete"
    I click Cancel and then it says:
    "Cleaning Up"
    "Image Incomplete"
    I again click Cancel.
    At this point iDVD freezes and I have to go up under the Apple symbol and do a Force Quit.
    Does anyone have any suggestions? I know I should try to make 2 DVDs out of all these photos instead of 1 but my neighbor was really hoping he could have all of them on 1.
    Thanks in advance for any and all help.

    Just drag them from the iPhoto Trash bin onto the Library icon just above it.
    OT

  • Mail problem with long titles using utl_smtp / mixed content / attachements

    Hello,
    I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...).
    For the body i got it working.
    And the title works fine too, untill the encoding passes a certain length, then goes all wrong and my mail header starts showing up in the mail body.
    Could anyone help me in finding a solution?
    Thanks in advance
    Below my code:
    DECLARE
       v_From       VARCHAR2(80) := 'test@localhost';
       v_Recipient  VARCHAR2(80) := 'test@localhost';
       v_Cc         VARCHAR2(80);
    -- long subject causing problems
       v_Subject    VARCHAR2(32000) := '123456789111111111111111111111118888888888888111111111111111991234567891111111111111111111111188888888888881111111111111119912345678911111111111111111111111888888888888811111111111111199';
       v_body       VARCHAR2(32000) := '<a href="#">tester</a><br><br>en nog wat éékes en ççkes';
       v_Mail_Host  VARCHAR2(30) := 'localhost';
       v_Mail_Conn  utl_smtp.Connection;
       crlf         VARCHAR2(2)  := chr(13)||chr(10);
    BEGIN
      v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
      utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
      utl_smtp.Mail(v_Mail_Conn, v_From);
      utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
      utl_smtp.Data(v_Mail_Conn,
    -- write header
        'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
        'From: '   || v_From || crlf ||
        'Subject: ' || utl_encode.MIMEHEADER_ENCODE(v_Subject) || crlf ||
        'To: '     || v_Recipient || crlf ||
        'Cc: '     ||  v_Cc || crlf ||
        'X-Mailer: Mailer by Oracle UTL_SMTP' || crlf ||
        'X-Priority: 1' || crlf ||
        'MIME-Version: 1.0'|| crlf ||       -- Use MIME mail standard
        'Content-Type: multipart/mixed;'|| crlf ||
        ' boundary="-----SECBOUND"'|| crlf ||
        crlf ||
    -- add message body
        '-------SECBOUND'|| crlf ||
        'Content-type: text/html; charset=UTF-8'|| crlf ||
        'Content-Transfer-Encoding: base64'|| crlf ||
        crlf ||
        utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw(v_body)))||
        crlf ||
    -- add csv attachment
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/plain;'|| crlf ||
        ' name="excel.csv"'|| crlf ||
        'Content-Transfer_Encoding: 8bit'|| crlf ||
        'Content-Disposition: attachment;'|| crlf ||
        ' filename="excel.csv"'|| crlf ||
        crlf ||
        'CSV,file,attachement'|| crlf ||   -- Content of attachment
        crlf ||
        '-------SECBOUND--'                            -- End MIME mail
      utl_smtp.Quit(v_mail_conn);
    EXCEPTION
      WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
        raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
    END;
    /

    Hi,
    I did not think the characterset and database would matter for this problem, but here is the info you requested.
    The database is an Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    The characterset : NLS_CHARACTERSET     AL32UTF8
    And i don't have a clue about the characterset of the operating system (not even sure what the operating system is), but i think that will be utf-8 aswell.
    I'm not sure what i did, to come over as rude, but i didn't mean to and i apologize for it.

  • Perplexing Problem with Boris Title Crawl

    This has been an ongoing problem that occurs whenever I use Boris Title Crawl to create very simple titles (i.e lower third, scolling titles, etc). Within the HD sequence, the titles work as intended, but when I down convert the sequence or export the sequence containing the titles to a QT file (whether via QT conversion or compressor) this is where I get the problems. Titles which were once centered become right justified or visa versa. It doesn't occur with all of the titles and there seems to be no recognizable pattern. Sometimes the title will flip back and forth between centered and justified. Sometimes I go back into the sequence and re-edit the title. This may solve it, but then another title will be effected. This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.

    *This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
    Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
    rh

  • FCP7 Problem rendering crawl titles...

    hi folks,
    big problems here...
    i am trying to create a crawl title that runs smooth (worked fine in FCP6!)...
    i also tried "boris title crawl generator". same problem!
    seems that FCP doesnt render fields in text generators anymore...
    no problems with normal camera-footage...
    dont know why... anybody with the same problem?
    Is that a new "nice" bug in FCP7?
    i am editing DVCAM via firewire connected to Sony DSR-11 --> connected to CRT-Monitor.
    sequenz-setting DV 48kHz
    thanks

    thanks. interesting article but it wont help...
    it doesnt matter how long my titles are or how big they are...
    in ANY case! FCP7 dont render moving titles with fields anymore.
    in FCP6 i could create crawl and roll titles without any problems...
    it wont work in FCP7. where is the difference?
    please, maybe there is somebody who can try to create a crawl title with FCP7?
    let me know if it works for you (or even not!).

  • Problem with inserting title sheet in sequence

    Hi everyone,
    I've recently started using Premiere Pro CS5 so I've only mastered the basics, but up untill now everything went well.
    My problem is as follows:
    To add a title in a sequence, I could drag it from the Project Menu in my sequence or click on the right mouse button and select the option 'insert' or 'overlay'.
    Currently however, the right mouse menu does not display these options, i.e. they're grey and unclickable. Moreover, when I drag a title to the sequence, it automatically 'overlays' instead of 'inserting'.
    In order to insert a title in my sequence, I now have to open in in te Source Monitor (that option is clickable), choose 'insert' and drag the title in the sequence. It's quite laborious and frustrating, since I have a feeling it's just a matter of changing my settings...
    Could you please help me out on this one?
    Thanks!

    When editing from the Project Panel via right-click or keyboard shortcut, you must have tracks targeted in your sequence. Here's a comparison:
    Basically, you have to tell Premiere where you want the clip to be inserted or overlaid, and that's accomplished with the track selectors being on or off.
    Moreover, when I drag a title to the sequence, it automatically 'overlays' instead of 'inserting'.
    Hold down the Control/Command key to do an insert edit; you'll see the mouse pointer change to indicate the different type of edit.

  • I have a printing cd cover problem the track titles overprint and I can't read the track titles, what can I do please

    I have a problem when printing cd covers, which has only just started happening, the track titles overprint so I can't resd them correctly, what can I do to fix this please.

    When I try and open my original catalog, I get the following error:
    Lightroom encountered an error when reading from the preview cache and needs to quit. 
    Lightroom will attempt to fix this error the next time it launches.
    But, when Lightroom opens, the error shows again and the program crashes. I created another catalog that does open, but occasionally the same error occurs and the program crashes.  This is happening many times per day.

  • PLEASE put nature of problem in thread title

    I can't believe how many of you put thread titles like "AAARRGH" or "GRRRR" or "Help" or "Songs"....please briefly put the nature of your problem or comment in the title. It makes it a lot easier for folks who actually CAN help you find your thread. There, I've said it...I suddenly fee LOTS better!

    Nor only that.... how many times do we need to anwe the same "how do I put DVD's on my ipod" threads? There has to be some type of "sticky" that we can have newcomers read before the post the same questiosn over and over and over.

  • Problems with the Title

    I have problems in creating new titles. I did alreday a few titles but now it is not possible to create new ones.
    I can only press the button preview, but the update button is not active.

    Hello Galfi,
    the update button should only be active when selecting an already created title and thus trying to change it's settings. have you tried simply dragging and dropping the title in the desired location?
    hope this helps
    viva la mela

  • Problems with Boris Title 3D (Imbedded Software in Final Cut Express 2.0)

    Thanks for all your help on my previous problem...I have run into another though.
    As I mentioned before, I recently upgrade to OS X Tiger. I am running FInal Cut Express 2.0, as my editing software. (The following problem was not an issue before I upgraded.) Whenever I try to edit or creat on Title 3D graphic, which used the Boris Title 3D software, the software opens, but the editor does not, and therefore I cannot edit or create any graphics using this software.
    If you have any ideas on a solution, please let me know!

    No longer have FCE 2.0

Maybe you are looking for