Problem in creation of Maintenance Notification.

Hi All,
I have a requirement to create a maintenance notification through BAPI. When I tried to create it by bapi  'BAPI_ALM_NOTIF_CREATE' , I am having one issue.
Whenever we create a notification by T-code 'IW21' there is one flag for 'Put in Progress' which changes the phase of notification from 'Outstanding' to 'In Progress'. But whenever I am creating with the help of BAPI this notification is deirectly going to 'In progress' Phase. I have checked all the parameters of this BAPI but didn't found any such flag.
So If anybody have solution like how to create initially notification in Outstanding phase and later if we need to change it how to change it, please help me out.
Thanks in Advanced.

Deepak,
Can you please elaborate your query.
What all fields are you passing in this BAPI and what the program you are using this BAPI.
Regards,
Chin2.

Similar Messages

  • Skip the Creation of Maintenance Notification

    I would like to know the effect if i will skip or remove the process of creation of Maintenance notification in SAP PM. The process will start with the creation of Order, if there's an external service required the Maintenance Order will be converted into PO if no external service or material will close the Order.
    Since the Creation of Maintenance Order will generate Notification, we were thinking that creation of Notification is redundant if the system allows to create order and notification in one transaction.
    What would be the effect of this, thanks and God bless.

    Greetings Peach,
    As the experts, who had already answered observed, this is purely a business process consideration. If your (Client's) organization supports a "streamlined" process in which direct Order creation is beneficial you can go for it.
    As you've written "Since the Creation of Maintenance Order will generate Notification, we were thinking that creation of Notification is redundant if the system allows to create order and notification in one transaction." I assume you are still using Notification and Order integration. But as Yogesh Dhokne mentioned, this is optional as well.
    If you choose to create a Notification in the background, you can still register breakdown times for MTTF/MTBF calculations, Catalog Codes for tracking and any additional information once the Orders are created.
    But consider this: How is work requested, released for execution and reported? If you only create Orders, you have only Orders to go on. Therefore, you might require more verbose User Status management, and you may find yourself with Orders that are being created unnecessarily and have to be closed, Orders being released prematurely... You have to have a very "flat" process around this immediate Order creation.
    On the other hand, consider that having Notifications created prior means a more "deep" process and more overhead, but you can have a step to filter works to be released on the Notification level before Orders are created, if you have more than one Notification  for the same work, you can assign it to a single Order, and you have more options when designing roles and authorizations, since you can separate access and business transactions for Notifications and Orders for your Operations and Maintenance users, if necessary.
    Please ask further questions if you have any!

  • Planned maintenance notifications to MEB

    Good Morning Guys
    I have been having problems processing planned maintenance notifications when creating revisiom and creating orders from revised revisions.
    Am getting two errors
    1.Task list A ENG 01: no conversion rule found for work center MA00/1000
    2.Error creating order for task list 02000038  4000290 A ENG 01 in revisions
    This is what i got from perfomace assistance
    Task list A ENG 01: no conversion rule found for work center MA00/1000
    Message no. WPSOR004
    Diagnosis
    The system tried to create an order for main work center MA00/1000 from task
    list A ENG 01. No conversion was found for work center MA00/1000 (valid from
    15.04.2014).
    System Response
    The system cannot convert the work center. The order creation process was
    canceled.
    Kind regards
    hussein

    Hi Hussein,
    Seems like issue of  validity date of Maint. Work Center . If it is, correct it in IR02.  and retry.
    Jogeswara Rao K

  • Creation of PM Notification based on UD Code

    Hi Seniors
    I am new to PM/QM module and facing an issue while configuring UD code follow-up actions.
    My requirement is once the Valution Code is set to "Rejected" in UD code then follow-up action should be generated and in this follow up action, couple of actions should take place :
    1. Set the equipment status (QFOA_OBJECT_STATUS_SET). It is happening
    2. Set the order status to TECO (QFOA_ORDER_TECHNICAL_COMPLETE). It is also happening
    3. Creation of a Notification so that based on that notification, corresponding order followed with PR/PO to be created for procuring of the equipment.
    I am not able to find out the way how to address Pt. No. 3. Kindly help
    Thanks
    Manmohan K Bajaj

    Hi,
    Thanks Seenu,
    So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
    So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
    Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
    please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
    Thanks in advance
    Ramya

  • Automatic Creation of Maintenance Plan, Measurement plan

    Hi Pal
    Business : The equipments are procuring for the purpose of supplying into customers.It is installed (via sales delevery) at customer location as requirement. From  the installation date rental will start and periodic visit is applicable after every 3 months. The technician will capture  some reading In initail installation time, periodic maintenance time.
    Requirement : The equipment will be created automatically thro serial no when doing the GR(Its possible) . Automatic creation of Maintenance Plan for the equipment  for 3 month frequency, 70% call horizon, early and late completion of 100%. Additionally the scedhule start date need to pick it from the notification end date of its respective equipment.Also measurement points should be generated in automatic way (Its fixed& common for all equipments).
    Is there any possiblity to complete this requirement? Please help me and suggest.
    Regards
    Thenna

    There is no suitable BAPI available to create Maintenance plan.
    Try for BDC.

  • Search option in catalog selection in maintenance notification item, object

    Dear Experts,
    I have a problem to search & choose the relevent catalog codes in maintenance notification item,  in catalog selection pop up when F4 done on object part. Is there any setting to find the relevent codes from the cataloge selection screen or any setting for the FIND option availabilty on the catalog selection pop up.
    We are using ECC 5.0.
    Kindly provide the solution.
    Regards,
    Tushar

    Tushar,
    Your emphasis is on Relevant Codes. This means codes relevant to the Technical Object (Equipment or Functional Location)
    For this purpose only SAP has given the functionality Catalog Profile.
    Create a Catalog Profile  (OQN6) in which you mention the codes relevant to the technical object.
    Now mention this Catalog Profile in the Organisation tab of the Technical object. (Equipment or Functional Location).
    After this whenever you create a notification on such Equipments/FLs, you will get only those catalogs which you've mentioned in the Catalog Profile
    Hope this helps you.
    Regards
    Jogeswara Rao
    PS: Creating a catalog Profile is a IMG activity, which you have to do in Client 200> generate a request> and transport this request to the client of your working.

  • Triggering of maintenance notification automatically

    Hi friends,
    I have a scenario which needs triggering a maintenance notification automatically. I have 3 measuring points for a equipment. I take measurement readings for these 3 measuring points using 3 measurement docs( say the measurement readings  be x, y and z).I need to trigger a notification when (x+y-z)/z >2%. This is very much similar to condition based maintenance where maint. notifications are triggered when the upper or lower limits of the measuring point are reached . But here the problem is
    I have 3 measuring points for the equipment and one by one I am creating the measurement docs for the measuring point. The system should calculate using the formula as soon as the last measurement doc is saved and based on the value. ie if >2% trigger a maintenance notification .(The challenge is 3 measurement docs are involved and how to link these 3 measurement docs and calculate value using the above formula).
    The client will be taking readings every day twice for the 3 measuring points based on which he will decide if the machine needs to be recalibrated. Hope the scenario is clear.
    Thnaks and best regds
    Arun

    Hi Arun
    Can you share more details.What are these measurement points & their Units.
    Based on your inputs it seems you are trying to link all the measurement points with some formulas which is not an out of the box functionality of standard SAP , the solution could be to develop a customized program
    You might have to store all the readings with ref to technical object in a customized table & write the relevant formula in the program.
    Talk to your ABAPER for this
    Regards
    Jignesh

  • Revision in Maintenance notification

    Dear Experts,
    I have face a problem regarding Revision "VIQMEL-REVNR" field showing in Start dates screen field in maintenance notification in developement client. Checked OIAL, it is found that tick on "Input" and not on "Hide".
    But in quality client, OIAL condition is same as above tick on "Input" and not on "Hide", but in maintenance notification it is hidden.
    Kindly help on this issue. Is there any other settings for the revision?
    Regards,
    Tushar

    Hi,
    Note [794920|https://service.sap.com/sap/support/notes/794920] removes the unwanted display of this revision field on notification. Check and apply this if not contained in your patch level. The revision field should not appear on notification.
    -Paul

  • Generating Purchase Req. / Purchase Ord. from Maintenance Notification

    Hi all,
    Is there any way we can create a purchase requisition(PR) or purchase order(PO) from a Maintenance Notification? I know we can create PR/PO from Maintenance Order but our client doesn't want to take that route.
    To add more info, the piece of equipment for which the notification will be raised, is created with a link to a material in MM (Serial Data tab in equipment master). We also have a vendor partner attached to the equipment as well as notification. We need to generate PR/PO from the maintenance notification which is raised for this piece of equipment.
    Any help / pointers / suggestions are welcome.

    Thanks Pete
    Is there one, or many PRs to a single notification
    There needs to be only one PR for a single notification. The notification pertains to only one piece of equipment, and once the PR -> PO -> GR cycle is completed, the notification will be closed. Next time, if the equipment fails, a new maintenance notification will be created. So, yes, there will be only one PR for a maintenance notification.
    How will you handle missing data e.g. vendor, material, etc
    The material no. for that particular piece of equipment is maintained in the equipment master (material field in the Serial number view). Also, we maintain vendor number under partners for the equipment master data. We should be able to use these while creating PR from notification. At least that's what is our initial thought. Please correct me on this.
    What will be the account assignment for the PR
    I'm not sure about this one though, I'll confirm with the MM consultant and update this reply.
    Will the notification user-status be update on PO creation, GR, IR, etc
    Yes, thanks for bringing this up. The client intends to use this functionality to check the availability of the equipment. So, not only the notification's user status should update based on PO status, but also the piece of equipment's user status should also get updated when the notification is closed and the piece of equipment is available.
    Will the notification be referenced in the PR/PO
    Not exactly, but there should be a report available which will list all the PRs / POs raised for maintenance of a particular piece of equipment. So, if notification is linked to PR/PO, we may  be able to generate this report easily. Again, correct me if I'm wrong on this.
    Do you want to limit who can create the PRs
    Well, if we are talking about auto-creation from notification, then only the person releasing the Notification will be able to generate PR indirectly. If it is manual creation, then yes, we will need to restrict this authority to limited people.
    Please let me know if these responses help you understand my requirement and give any other possible solution.

  • Problem in  creation of Customer Master

    Hi gurus,
    I am facing problem in creation of customer master.
    I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
    Now i am trying to create a customer master, at partner functions level under sales area data...  the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
    Please help me out in acertaining,  what could be the issue.
    regards
    Gupta
    [email protected]

    its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
    path to check the number range is as below :
    spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---    
    at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
    and some times  u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
    rewards if solved ..
      thank you
    madhan

  • Problem in creation of SOAP massage

    hi
    I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
    but i am getting an exception as following
    SOAPFaultException
    this exception indicate that there is some problem in creation of SOAP massage internally
    so can anyone help me to know what is the problem?
    If u want to see the code then i can display here.
    thanks in advance

    its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
    path to check the number range is as below :
    spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---    
    at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
    and some times  u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
    rewards if solved ..
      thank you
    madhan

  • Problem in creation of STO(stock transport order)

    hi all SAP gurus,
    i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
    i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
    if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
    thnx in advance.
    rgrds,
    rajesh

    Hi Rajesh,
    when ur creating STO with UB doc type, then you have to maintain material in both the plants.
    Regarding the error which is comming for you, you have to check the settings at
    SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
    here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
    After this you create STO as you are doing and see what the system is prompting.
    For any further clarification let me know.
    Regards,
    NJ

  • Problem in creation of HUs through FM HU_REPACK and HU_POST

    Hi Experts
    This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
    I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
    Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
    Please find the example of the HU created in the system
    0 10020000038479 S-DISP 1 EA S DISPNSARY
    1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
    1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
    Material is 810062
    Batch is L0533A4172
    Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

    Hi Sailaja,
    I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
    But here is what I have been doing.
    Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
    The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
    Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
    Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
    You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
    Happy Debugging.

  • Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

    Hi Experts
            This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
    I am sending two Unique Sources HUs  with single destination HU for the same material and batch into HU_REPACK  and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
      Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
    Please find the example of the HU created in the system
        0     10020000038479     S-DISP     1     EA          S DISPNSARY
        1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
        1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
    Material is 810062
    Batch    is L0533A4172
    Can you please assist me how to acheive single line item HU  when we are trying to repack the data for  same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

    *

  • Problem in  creation of any purchasing doc  against plant 0001

    Hi MM Experts,
    I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
    I m working on ECC 6.0.
    Regards,

    Dear Sairam/Steve,
    I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
    Note 433997 introduced a new logic for the F4 help for plants.
    solution proposed in note 433997 :
    To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
    Then the plant should have an address number and should also be displayed in the search help.
    Thank you all
    Regards,

Maybe you are looking for