Problem in HA Configuration and ERS installation

Dear Experts,
I have planned to install a HA SAP ECC 6.0 System with Oracle DB.
I completely configured 5 Virtual Machines for this purpose, and at status quo, I have decided to install these components as mentioned below:
VM1: ASCS
VM2: ERS
VM3: DB
VM4: CI
CM5: DI
All machines run Redhat linux x64.
I started with installing ASCS on the first VM. It was successful; also I have configured the file system as described in the following link:
http://help.sap.com/saphelp_nwpi711/helpdata/en/27/44f17a26a74a8abfd202c4f5dc9a0f/content.htm
Then I tried to install ERS on the second VM (VM2). The installation was able to find the profile which the ASCS has generated but finally it failed because it couldn't find some files:
sapinst_dev.log says:
TRACE 2014-03-02 15:00:23.858
NWException thrown: nw.noExecutableFound:
Cannot find executable sapcontrol at these locations: /usr/sap/SHP/ERS10/exe/sapcontrol, /usr/sap/SHP/SYS/exe/run/sapcontrol, /usr/sap/SHP/SYS/exe/uc/linuxx86_64/sapcontrol.
As a result, I decided to try another plan by installing another ERS on the first VM and it completed successfully.
Now, I have ASCS and ERS on the VM1, but I cannot install ERS on the VM2.
The question is:
1.Since I don’t want to have any SPOF, which one of the following solutions is correct?
Solution 1:
VM1: ASCS
VM2: ERS
Solution2
VM1: ASCS + ERS
VM2: ERS
Solution 3
VM1: ASCS + ERS
VM2: ASCS + ERS
2.If you dont choose Solution 3 then; How can I solve the problem of installing ERS on the second node? Any idea
Regards,
Meysam Kermani

do you want to install the SAP on HA (High availability/SPOF)?
as per your thread looks like you want to install each service on separate VM?
I would strongly suggest you must go through the installation guide and before you start the installation check whats your requirement is. for example refer https://service.sap.com/~sapidb/011000358700001414082012E

Similar Messages

Problems with track pad and osx installation disc on macbok.

Okay so I am having two separate problems with my macbook.
First, the track pad, or the button beneath it, is pretty much completely out of commission. When I try and use it, the computer acts as if I am holding down the button all the time. Example, when I drag it across the desktop, the "click-and-drag" square starts appearing next to the cursor or when move the cursor on an icon, it tries to click and drag that. The only way that I can fix it thus far is to hook up my wireless mouse. Hoping someone else has a better solution so that I can continue to use the notebook on the go without having to bring the mouse. Note: the button does not appear to be depressed in anyway.
Second problem is happening when I attempt to reboot the computer with the OS X Leopard disk in for a re-installation. When the gray start-up screen appears, before the gray apple comes on the middle of the screen, a folder icon with a question mark on it appears for a split second and then turns into the normal apple icon after which my OSX disk is spit out of the drive and the computer boots straight to the desktop. I have attempted holding down the control button, the option button, and starting the process while the computer is still turned on and then just restarting it, the disc is ejected upon restart every time. I have reinstalled the OS with this disk once before and it has worked fine and other disks seem to be working fine in the drive, so I am at a lost here.
I know that was a lot of info but if anyone out there can help me out with either one of these problems it would be much appreciated.
Thanks.

exactly the same issu with the track pad here.
I v tried to use it without the battery but the problem persist.
If I use an USB mouse i can move it arnd but wen I click or double click nothing happen...so is useless.Same problem with the Blur Tooth wireless mouse.
The issue appear several months ago...after a couple of weeks went away, and now is back again. I try the routine manteinance but nothing solved the issue.
Any suggestion? I have some urgent work to do ...I will try tomorrow to bring it in an apple store but I can't leave it with them ..
Thanx in advance

Problem with the WAS and EP installation

Hi All,
I am getting an error at step 20 i.e Install Java Engine.
And the log file SecureStoreInsert.log says:
Encryption and decryption is not possible because the full version of the SAP java cryptotoolkit was not found(iaik_jce.jar is required,iaik_jce_export.jar is not sufficient) or the JCE jurisdiction ploicy don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm.
I have done this installation earlier also with the same dump (having JDK1.4.2_08) that was a success.
Kindly help with pointers
Regards,
Indu Garg

Yes,I have the correct version.
And Sorry for not mentioning but my problem has been solved.
Solution:
Copy the iaik_jce.jar file to the <JDK installation Dir>/jre/lib/ext.
Regards,
Indu

Problems with Apple Configurator and app lock.

Hello Folks!
I'm using a bunch of iPod Touch of the 4th generation (iOS 6). I locked them in an app with apple configurator 1.1.2. From time to time I get a message: The guided access is not available any more, contact administrator.
Reconnecting to the maintance laptop solves the problem.
How can I prevent this?
Thanks
Nils

I recommend posting in the iPhone or iPad for the Enterprise forums

Problems with Apple Configurator and i0S 8

Hello, I am using Apple Configurator to update ipad 4's (30) and sync new apps. My cart of ipad 4's was update mistakenly in configurator when I forgot to change settings to "never update device". My question is, why does AC keep "erasing and installing the profile" and why are pages, numbers, keynote sent back to the cloud to be downloaded. These apps disappear every time I try to do a simple update of a wireless setting, etc. If you can guide me that would be helpful

I recommend posting in the iPhone or iPad for the Enterprise forums

Problem after todays AirPort and iTunes installation DEC 17

The Macintosh HD icon now doesn't display its name under the icon. When I open the finder, it has the icon on the sidebar but no name. I am still able to access everything fine and did a disk permission and verify disk and everything was fine. What the...?

Right click on the drive in Finder and select "get info". In the getinfo screen, Enter the Macintosh HD name in the "Name and Extension Window".
Regards

Problem in Point of Sale 1.0 (Transactionware) and Triversity installation.

Hi Friends,
We are facing major problems during the Installation of SAP POS 1.0(Transactionware).
1.We are facing few problems while installing POS and Triversity.
2. Actually in installation there is no problem, the problem is with configuration.
We have installed POS express (Front End) and Transnet client in one system then Triversity Stored value Application & Transnet server in another system.
We have used SQL server as Database in both POS and Triversity.
But while installing Configurator for POS it is asking for Sybase database and we have done that also.
After all the installation when we try to run POS Xpress front end and enter some values like Cashier id, cahier name then it exiting us from that current screen and sometime it is giving information like "Server Not Available"
Which server it is talking about and where to configure, we could not find in the documentation.
The POS Xpress is connecting to which server we are bit confused, becaude we have installed Triversity server in one machine and POS Stored value manager in the same machine where POS Xpress is installed.
So, please help us to resolve this critical issue.
Thanks in Advance,
Basis Team (Kolkata)...

Configure the store in the configurator.

Lr and Ps installation problems.

i just uninstalled my photoshop cc and lightroom 5 app after i purchased the creative cloud for photography and i am trying to reinstall the apps but i am unable too, can someone help me?

I had possibly the same error...
Windows installer looking for the LR 1.3 msi but could not find it (msi is extracted to a temp location on drive). The dialog box appeared asking for it to be manually located. Win Installer refered to an unavailable network resource. Install failed with an error, 1714(?) unable to remove older version.
I ran a search on C drive and located the extracted msi and directed installer to this location but still would not install.
Thought that there may be a problem left by a previous LR install so ran MS Windows Installer Clean Up Utility, selecting "Adobe Photoshop Lightroom" only and click remove. (Warning: this can toast the app's install and require a total reinstall--I was luck).
Ran LR 1.3 installer and upgrade completed fine. Did have to tell LR 1.3 where my image folder on the ext. hard drive was and LR ran a check - catalog vs folder to ensure integrity.
All fine now.

Installer problems ?? frozen and cant shut down :(

installer problems ?? frozen and cant shut down

Thanks the error that came up was Error 1603. I have tried what they said and still no help . Think its off to the store tomorrow to see if they can figure it out.
Thanks for trying to help

XSS (ESS/MSS) Configuration and Installation Guide

Hello,
I have checked archived postings and see people sharing configuration and installation guides for ESS/MSS. I wonder if people are still sharing these documents?
I'm on EP 2004s SP14 by the way.
Help would be greatly appreciated.
Jan

Hi Jan,
You might want to look at this thread, which has all the config docs listed
Re: ESS-MSS implementation Link
Good Luck!
Sandeep Tudumu

Please help: How to fix error message: Connection error. Try again. Check configuration and if problem persists contact the administrator.

Please help on how to fix this error message when I'm trying to connect on my VPN
Connection error. Try again. Check configuration and if problem persists contact the administrator.

Thanks for the info.

I have recently purchased finale 2011, and it installs, but will not run? Any idea what the problem is?

I have recently purchased the finale 2011 music program, and it installs without any problems, but will not run when I try to start up the program. It acts like it is going to start, but stops when loading the plugins. I have been talking with Finale tech support for three days, and they are coming up empty, but they are still trying. Any ideas what the problem might be?
Thanks,
John

Try booting in Safe Mode (hold the shift key while booting until the grey progress bar appears).
If you're able to log-in, then re-boot and log-in

HT1926 I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?

I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?

Hello rvalle3,
The following article can help get iTunes updated and running again.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

CF Installations :Key differnces between Multiserver configuration and J2EE Configuration

Hi,
Can anyone give the important differences between Multiserver
configuration and J2EE Configuration installations?..

Hello Dalibor,
While the service account user object has Use DES selected it would appear your user session is still sending the AS Java an RC4 service ticket. This might occur if your user had requested a service ticket before Use DES was selected, or before that setting had replicated to the appropriate domain controller. The fix might be as simple and logging out and logging back in now that some time has passed.
You could also download the Microsoft kerbtray utility and inspect the service ticket enc type to validate this. kerbtray can also be used to clear old tickets and is generally useful for troubleshooting this kind of thing.
Thanks!
Kyle

Problems With System Configuration

System Configuration is altered and not repairable. Selective startup is persistent. Normal startup is selected, but the Apply button is greyed out, inaccessible, and system always remains in Selective startup. As a result, Current User profile is probably
corrupted. Windows Store will not install (services are corrupt, SFC and DISM did not work). Outlook profile was deleted, needed to be reinstalled, and can not receive mail. Excel math engine totals values higher than actual amounts. IE automatically signs
into all Microsoft accounts (reset to default settings worked for a log on, but automatic sign in resumed afterwards).
Are there any solutions?
Office diagnostics produced the following report.
Diagnostic Results
None of the Microsoft Office Diagnostics found any problems.
More resources
Setup Diagnostic — File corruption or altered file
The Setup Diagnostic repaired problems with your installation of Microsoft Office. Your Microsoft Office programs should now function correctly.
If your Microsoft Office programs continue to crash, the source of the problem may be a hardware failure or hardware configuration problem. Review the results of the Disk and Memory Diagnostics to determine if a hardware failure is affecting your installation
of the 2007 Office release.
More resources
Setup Diagnostic — Missing media
The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide
the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:
Your 2007 Office release installation CD
An installation disk or repair CD provided by the vendor of your computer
A connection to a network installation of the 2007 Office release
After you obtain access to a valid source, run Office Diagnostics again.
More resources
Disk Diagnostic — Failure of hard disk predicted
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors that may indicate that the hard disk is likely to fail. SMART is a feature that some disk drive manufacturers provide to give users advance notice
of potential hard disk failure. Instability in your Microsoft Office programs may be the result of these hard disk drive errors.
Note This result can indicate a severe problem, but some hard disks may not accurately report their results.
We recommend that you do the following:
1.Back up your important data immediately.
2.Check the results of other diagnostics, and follow the instructions for resolving any issues that the other diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
3.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Disk Diagnostic — Errors in system event log
The Disk Diagnostic found evidence of hardware errors. Instability in your Microsoft Office programs may be the result of these hardware errors.
This result occurs if one of the following has happened recently:
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors. SMART is a feature that some disk drive manufacturers provide to give users advance notice of potential hard disk failure.
Microsoft Office Diagnostics has found blocked-out (failed) sectors on your hard disk.
Microsoft Office has had trouble accessing files from the hard disk; it needs these files to function properly.
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
2.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Memory Diagnostic — RAM failure
The Memory Diagnostic found evidence of failure in the random access memory (RAM).
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Memory Diagnostic issue is resolved.
2.If you continue to get this result, do either of the following:
Run a Microsoft Windows memory diagnostic. For more information, see the following:
Windows Vista How do I know if my computer has a memory problem?
Microsoft Windows XP Windows Memory Diagnostic
Contact someone, such as the vendor of your computer or RAM.
More resources
Memory Diagnostic — User is not an administrator
The Memory Diagnostic was unable to run because you do not have administrative rights on this computer. To successfully run the Memory Diagnostic, someone with administrative rights must log on to this computer and run Microsoft Office Diagnostics.
More resources
Update Diagnostic — Installation is out of date
The Update Diagnostic determined that your installation of Microsoft Office does not have the latest service packs installed. Installing service packs improves stability. We recommend that you visit Downloads on Microsoft Office Online, and then, under Office
Update, click Check for Updates.
More resources
Compatibility Diagnostic — Conflicting versions of Outlook found
The Compatibility Diagnostic identified conflicting versions of Microsoft Office Outlook. To remove the version of Outlook from your computer that you do not want, do the following:
Microsoft Windows Vista
1.Click the Start button, and then click Control Panel.
2.Click Uninstall a program.
Note In Classic view, double-click Programs and Features.
3.Select the version of Outlook that you do not want, and then click Uninstall.
Microsoft Windows XP
1.Click Start, and then click Control Panel.
2.Double-click Add or Remove Programs.
3.Select the version of Outlook that you do not want, and then click Remove.
More resources

Check disk and memory diagnostics found no errors.
SFC and DISM listed errors when performed in diagnostic start up. Commands changed from previous attempts. Before SFC and DISM only had to be entered as SFC and DISM. Presently, additional commands are required.
Log Name:      Microsoft-Windows-MemoryDiagnostics-Results/Debug
Source:        Microsoft-Windows-MemoryDiagnostics-Results
Date:          8/21/2014 12:51:09 PM
Event ID:      2001
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      TAS
Description:
Windows Memory Diagnostic results
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MemoryDiagnostics-Results" Guid="{5F92BC59-248F-4111-86A9-E393E12C6139}" />
    <EventID>2001</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-21T16:51:09.612555200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="5296" ThreadID="5300" />
    <Channel>Microsoft-Windows-MemoryDiagnostics-Results/Debug</Channel>
    <Computer>TAS</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <Results xmlns="http://manifests.microsoft.com/win/2005/08/windows/Reliability/Postboot/Events">
      <MemDiagRawData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emDiagRawData>
    </Results>
</UserData>
</Event>
Windows Resource Protection could not start the repair service.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>DISM
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
         {servicing_command} [<servicing_arguments>]
DESCRIPTION:
DISM enumerates, installs, uninstalls, configures, and updates features
and packages in Windows images. The commands that are available depend
on the image being serviced and whether the image is offline or running.
GENERIC IMAGING COMMANDS:
/Get-MountedImageInfo   - Displays information about mounted WIM and VHD images.
/Get-ImageInfo          - Displays information about images in a WIM or VHD file.
/Commit-Image           - Saves changes to a mounted WIM or VHD image.
/Unmount-Image          - Unmounts a mounted WIM or VHD image.
/Mount-Image            - Mounts an image from a WIM or VHD file.
/Remount-Image          - Recovers an orphaned image mount directory.
/Cleanup-Mountpoints    - Deletes resources associated with corrupted mounted images.
WIM COMMANDS:
/Capture-CustomImage    - Captures customizations into a delta WIM file on a WIM Boot system. Captured directories include all subfolders and data.
/Get-WIMBootEntry       - Displays WIMBoot configuration entries for the specified disk volume.
/Update-WIMBootEntry    - Updates WIMBoot configuration entry for the specified disk volume.
/List-Image             - Displays a list of the files and folders in a
                            specified image.
/Delete-Image           - Deletes the specified volume image from a WIM file
                            that has multiple volume images.
/Split-Image            - Splits an existing .wim file into multiple
                            read-only split WIM (SWM) files.
/Export-Image           - Exports a copy of the specified image to another
                            file.
/Append-Image           - Adds another image to a WIM file.
/Capture-Image          - Captures an image of a drive into a new WIM file. Captured directories include all subfolders and data.
/Apply-Image            - Applies an image.
/Get-MountedWimInfo     - Displays information about mounted WIM images.
/Get-WimInfo            - Displays information about images in a WIM file.
/Commit-Wim             - Saves changes to a mounted WIM image.
/Unmount-Wim            - Unmounts a mounted WIM image.
/Mount-Wim              - Mounts an image from a WIM file.
/Remount-Wim            - Recovers an orphaned WIM mount directory.
/Cleanup-Wim            - Deletes resources associated with mounted WIM images that are corrupted.
IMAGE SPECIFICATIONS:
/Online                 - Targets the running operating system.
/Image                  - Specifies the path to the root directory of an offline Windows image.
DISM OPTIONS:
/English                - Displays command line output in English.
/Format                 - Specifies the report output format.
/WinDir                 - Specifies the path to the Windows directory.
/SysDriveDir            - Specifies the path to the system-loader file named BootMgr.
/LogPath                - Specifies the logfile path.
/LogLevel               - Specifies the output level shown in the log (1-4).
/NoRestart              - Suppresses automatic reboots and reboot prompts.
/Quiet                  - Suppresses all output except for error messages.
/ScratchDir             - Specifies the path to a scratch directory.
For more information about these DISM options and their arguments, specify an option immediately before /?.
Examples:
    DISM.exe /Mount-Wim /?
    DISM.exe /ScratchDir /?
    DISM.exe /Image:C:\test\offline /?
    DISM.exe /Online /?
C:\WINDOWS\system32>DISM.exe /English
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 1639
No DISM options were specified on the command-line.
Run DISM with a command-line option specified, such as /Image or /Online. For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Problem in HA Configuration and ERS installation

Similar Messages

Maybe you are looking for