Problem in loaded data in PSA

Hello All;
Could any one please explain this to me. I am loading data into my PSA from a datasource from ECC.for a given field where the length exeed the external length, the exeeded characters will be loaded in the next field. How to fix this ?
Regards
Anis

Hi,
it is the text fields you can achieve the through filed level routine.
you want total description
RESULT = SOURCE_FIELDS-TEXT_LONG+0(60). - info object 1
IF strlen( SOURCE_FIELDS-TEXT_LONG ) > 60.
         RESULT = SOURCE_FIELDS-TEXT_LONG+60(60).     - info object 2
       ENDIF.
IF strlen( SOURCE_FIELDS-TEXT_LONG ) > 120.
         RESULT = SOURCE_FIELDS-TEXT_LONG+120(60).      - info object 3
       ENDIF.
IF strlen( SOURCE_FIELDS-TEXT_LONG ) > xxx.
         RESULT = SOURCE_FIELDS-TEXT_LONG+xxx(xx). info object - N
       ENDIF.
if you write the for all info object.
Thanks,
Phani.

Similar Messages

Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

How to load data from PSA in BI 7.0

Hi,
Gurus
I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
I will reward poaints
Regards
Alex

Hi,
I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
Try these steps:
1) Create and activate Transformation.
2) Create and activate DTP first then in DTP itself in <b>Execute tab</b> click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
*Please assign points if useful.

Error loading data into PSA (Exception in SM58)

Hello,
I have a problem to load data from a SAP ERP 6.0 into a (new) SAP BI 7.3 System. I created a DataSource in the ERP system and try to load the data into a PSA. Now, when I start the data load of my InfoPackage, I get following result:
After that nothing further happens. Then I checked SM58:
Does this error look familiar to anybody? I'm wondering why the "Target System" column is empty. Maybe there are some basic settings missing?
Thanks in advance!
Regards
Václav

Hi Raman,
The requests are marked as successful in SM37.
RequestId from InfoPackage Monitor:
And the corresponding job in SM37 (ECC system):
So this part seems to be fine. What else can I check?
Thanks & regards
Václav

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

Error in loading data from PSA to masterdataTables by using ProcessManually

Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
Soujanya

Hi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Problem in uploading data to psa.

Hi experts,
im having problems in uploading data to psa using info package in HR info area.
while monitoring the info package the following error comes with red traffic signal..
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
So , please help me in this regard...
waiting for your reply...

Hi,
You may need to check for pending TRFCs/IDOCs in source system in Tcode SM58 and BD87 and process them manually.
ProcessI DOCS Manually
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
&messageID=2311994
Thanks,
JituK

Problem in Loading data for clob column using sql ldr

Hi,
I am having problem in loading data for tables having clob column.
Could anyone help me in correcting the below script for ctrl file inorder to load the data which is in mentioned format.
Any help really appreciated.
Table Script
Create table samp
no number,
col1 clob,
col2 clob
Ctrl File
options (skip =1)
load data
infile 'c:\1.csv'
Replace into table samp
fields terminated by ","
trailing nullcols
no,
col1 Char(100000000) ,
col2 Char(100000000) enclosed by '"' and '"'
Data File(1.csv)
1,asdf,"assasadsdsdsd""sfasdfadf""sdsdsa,ssfsf"
2,sfjass,"dksadk,kd,ss""dfdfjkdjfdk""sasfjaslaljs"
Error Encountered
ORA-01461: can bind a LONG value only for insert into a LONG column
Table sampThanks in advance

I can't reproduce it on my 10.2.0.4.0. CTL file:
load data
INFILE *
Replace into table samp
fields terminated by ","
trailing nullcols
no,
col1 Char(100000000) ,
col2 Char(100000000) enclosed by '"' and '"'
BEGINDATA
1,asdf,"assasadsdsdsd""sfasdfadf""sdsdsa,ssfsf"
2,sfjass,"dksadk,kd,ss""dfdfjkdjfdk""sasfjaslaljs"Loading:
SQL> Create table samp
2 (
3 no number,
4 col1 clob,
5 col2 clob
6 );
Table created.
SQL> host sqlldr scott/tiger control=c:\temp\samp.ctl log=c:\temp\samp.log
SQL> select * from samp
2 /
        NO
COL1
COL2
         1
asdf
assasadsdsdsd"sfasdfadf"sdsdsa,ssfsf
         2
sfjass
dksadk,kd,ss"dfdfjkdjfdk"sasfjaslaljs
        NO
COL1
COL2
SQL> SY.

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Load data from PSA to ODS in Process Chain

Hi All,
I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
I just want to load data in the following Condition
1. Need to load data from R/3 to PSA.
2. Need to load data from PSA to ODS.
I need to include this two Info Packages in Process Chain.
I dont find any option to load PSA to ODS through Process Chain..
Pls Suggest.
Thanks,
Ram.

Hi Ram,
You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
Regards
Sunil

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

Problem in loading data

Hello All,
I am using data source 2LIS_11_VAHDR in BI 7.0 to load data to ODS.
I am using the full upload.
When i schedule the infopackage i dont get any records.The request status is shown as running.
So i check the job in the source system.But i Saw that Job status is Released and not active.
There were some entries already present in the extraction queue.So I tried scheduling Job to move the entries from extraction queue.But this job too is showm as released and not active.
Please let me know what can be the problem.

Hi,
Check in RSA3 if you are getting records then you should be able to get it to PSA and then ODS.
If not then replicate the data source activaet the transfer structure and again laod . This will help.
Regards,
Amol

Error while loading data from PSA to DSO

Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.

Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum

Problem in loaded data in PSA

Similar Messages

Maybe you are looking for