Problem in running the query on ODS

Hi All,
I have been trying to run the query which consists of only 25 fields and doen't contain much calculations and routines and trying to restrict even 7000 records.
That too result in system failure reporting on storage parameters somtimes giving dump as well.
Could you please suggest me the solution for this as this is urgent requirement.
Thanks
Suryam

Hi,
Are you using a filter / restrictions in the query,if So create a Secondary index which can be suitable(same order) to this filterations/restrictions.
You can find the order in where cluase in the sql statement used in the query execution.you can see it in SM50.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Database Error while running the query.

    Hi,
    While running the query in webi rich client i am having a "database error IES 10901 and WIS 10901" , it is showing that the data source name not found and default driver is not specified.
    I am trying to generate report from efashion universe which is in .unx format, same client version and universe is running fine on another machine (webi rich client).
    PS: The above mentioned universe is running fine on my BI launch pad, the problem is with webi rich client only.
    Please help!!

    Hi,
    Which Database your are using .
    As explained by Yuvraj You need to install driver for specific database .
    Ask for client or (your Database ) driver from administrator .
    After installation you can see your database Driver in following path
    Control Panel\System and Security\Administrative Tools\Data Sources (ODBC)
    See in Drivers Tab .
    If you are using oracle & client is install on your system then Check TNS Names File in NETWORK folder .

  • Index does not exist error while running the query

    Hi Everone,
    I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist".  Please help me out.
    With Regards
    Pavan
    Edited by: PavanRaj_S on Mar 3, 2010 4:50 AM

    Hi,
    If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
    Regards
    sivaraju

  • Problem while running BEx Query

    Hi All,
    I had reqiurement of calculating the difference of the two dates.I calculated Date Difference but I am getting problem when I run the Query.
    The problem is " I am finding the difference between Schedule Line Date and Posting Date. There are some blank spaces in the cube over Schedule Line Date and also over Posting Date. While running the Query Blank Space is taken as # symbol and while calculating the differences it is giving the differences in Lakhs."
    Can anybody help me to solve the problem " To remove the # symbol and calculate the differences properly".
    Thanks in advance.
    With Regards
    Mahi

    Hi,
    Use the Boolean concept like below:
    I hope you are using formula varibles to get Dates into the formula.
    Lets assume fv1 is formulavarible on Schedule line date and FV2 is Formula varible on Posting date.
    (FV1 == '' OR FV2 == '') * 0 + (FV1 <> '' AND FV2 <> '') * (FV1-FV2).
    With rgds,
    Anil Kumar Sharma .P

  • Problem with running a query

    I'm having problem running a query when I use my own userid. The query runs fine when I log on as the owner of the tables. but when I use my own userid ( I have all the privileges to all the tables, snapshots, views needed by the query ) then the query just sits there doing nothing.
    We are currently using Oracle8.0.5.
    Anybody know what the problem might be. shouldn't the query use the same path of execution no matter who runs the query.
    Any suggestions anyone ???

    Hi,
    I think the temporary tablespace is the root cause in your case.
    Pl. specify a different temporary tablespace for sorting activities for your user and things should be fine.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bangal13 ():
    I'm having problem running a query when I use my own userid. The query runs fine when I log on as the owner of the tables. but when I use my own userid ( I have all the privileges to all the tables, snapshots, views needed by the query ) then the query just sits there doing nothing.
    We are currently using Oracle8.0.5.
    Anybody know what the problem might be. shouldn't the query use the same path of execution no matter who runs the query.
    Any suggestions anyone ???<HR></BLOCKQUOTE>
    null

  • Problem for running Update query with Chinese

    Hi all,
    I am running a web application in Lotus Domino.
    I have a Lotus Script Agent which need to update Oracle 8i Database with Chinese Character throught ODBC but i find that all characters become some strange characters.
    I got the problem only for update query.
    I have no problem for select query for getting the chinese data.
    Also, I got no problem to run the update query with chinese characters in Sqlplus.
    I also try to run the same update query which the ODBC connection is pointing to an MS Access Database. It works too.
    So the only things i leave is the Oracle ODBC driver.
    Anythings I should do for the Oracle ODBC server?
    Thanks very much.

    Hi, I checked the registry of Oracle and
    in the NLS_LANG field, the values is AMERICAN_AMERICA.UTF8. In the server side, I set the same.
    It should be okay, as i can retrieve the chinese content in the Oracle. Just that when i try to run a query contain chinese, such as,
    "insert into TableA values ('���')". i will got some strange character inserted in the databasae.
    Could you tell me what should i do?
    Thanks a lot a lot.

  • Problem while running a query on multiprovider

    Dear all,
    I have created a query to generate the balance sheet in FIGL using standard virtual cube 0FILGL_V01 and a custom transactional cube which gets plan data through BPS. The custom plan cube is an exact copy of the 0FIGL_V01 (plan value is populated in 0val_flow KF). These two cubes are conncected using a multiprovider. In the identification tab in the mutliprovider definition I have selected both the data targets for all characteristics.
    Now when I create a query for balance sheet using GL account no and plan and actual value of cumulative balance KF I get the following error.
    Error 'Field symbol has not yet been assigned.' in RSDRC_CUBE_DATA_GET_RFC could not be caught.
    When i run the query in the RSRT transaction it shows 'Some Key figure have exception aggregation.'
    I'll be very grateful if somebody could explain how to about removing this error. Thanks a lot.
    Regards,
    Sumit

    Hi Sumit,
    Try this OSS note:905083
    Import Support Package 16 for 3.5 (BW 3. 50 Patch 16 or SAPKW35016) into your BW system. The Support Package is available once Note 0872275 "SAPBWNews BW Support Package 16 NetWeaver'04 Stack 16", which describes this Support Package in more detail, has been released for customers.
    Before you implement the correction, you must carry out the following actions:
    1. Use Transaction SE37 to create the RSDRC_RAISE_EXCEPTION function module in the RSDRC function group (Short text = Terminator 2). This function does not have any parameters.
    2. In the RSDRC_CUBE_DATA_GET_RFC function module, under 'Tables', add the new entry E_T_MESG of the TSMESG type and this new entry is optional.
    3. The T100 messages DBMAN 003,004 and 005 complete the correction:
    a) 003: Unknown error in part cube RSDRC_CUBE_DATA_GET_RFC = &1
    b) 004: Non-catchable error '&1' in RSDRC_CUBE_DATA_GET_RFC.
    c) 005: The following error occurred in RSDRC_CUBE_DATA_GET_RFC for part cube = &1.
    In urgent cases you can implement the correction instructions.
    To make information available in advance, the notes mentioned may already be available before the Support Packages are released. However, in this case the short text still contains the words "preliminary version".
    Hope this helps.
    Assign points if useful
    Venkat

  • Problem while running a query on a multiprovider

    Dear all,
    I have created a query to generate the balance sheet in FIGL using standard virtual cube 0FILGL_V01 and a custom transactional cube which gets plan data through BPS. The custom plan cube is an exact copy of the 0FIGL_V01 (plan value is populated in 0val_flow KF). These two cubes are conncected using a multiprovider. In the identification tab in the mutliprovider definition I have selected both the data targets for all characteristics.
    Now when I create a query for balance sheet using GL account no and plan and actual value of cumulative balance KF I get the following error.
    Error 'Field symbol has not yet been assigned.' in RSDRC_CUBE_DATA_GET_RFC could not be caught.
    When i run the query in the RSRT transaction it shows 'Some Key figure have exception aggregation.'
    I'll be very grateful if somebody could explain how to about removing this error. Thanks a lot.
    Regards,
    Sumit

    Hi Sumit,
    Try this OSS note:905083
    Import Support Package 16 for 3.5 (BW 3. 50 Patch 16 or SAPKW35016) into your BW system. The Support Package is available once Note 0872275 "SAPBWNews BW Support Package 16 NetWeaver'04 Stack 16", which describes this Support Package in more detail, has been released for customers.
    Before you implement the correction, you must carry out the following actions:
    1. Use Transaction SE37 to create the RSDRC_RAISE_EXCEPTION function module in the RSDRC function group (Short text = Terminator 2). This function does not have any parameters.
    2. In the RSDRC_CUBE_DATA_GET_RFC function module, under 'Tables', add the new entry E_T_MESG of the TSMESG type and this new entry is optional.
    3. The T100 messages DBMAN 003,004 and 005 complete the correction:
    a) 003: Unknown error in part cube RSDRC_CUBE_DATA_GET_RFC = &1
    b) 004: Non-catchable error '&1' in RSDRC_CUBE_DATA_GET_RFC.
    c) 005: The following error occurred in RSDRC_CUBE_DATA_GET_RFC for part cube = &1.
    In urgent cases you can implement the correction instructions.
    To make information available in advance, the notes mentioned may already be available before the Support Packages are released. However, in this case the short text still contains the words "preliminary version".
    Hope this helps.
    Assign points if useful
    Venkat

  • While running the query how much time it will taken, I want to see the time

    Hi Folks
    I would like to know ... While running the query how much time it will be taken, I want to see the time? in WEBI XI R2.....
    Plz let me know  the answer.......

    Hi Ravi,
    The time a report runs is estimated based on the last time it was run. So you need to run the report once before you can see how long it will take. Also it depends on several factors... the database server could cache some queries so running it a second time immediately after the first time could be quicker. And there is the chance of changing filters to bring back different sets of data.
    You could also schedule a report and then check the scheduled instance's status properties and view how long a report actually ran.
    Good luck

  • No Data Shown because an error occurred while running the query

    Discoverer 10gR2 using Plus on Firefox:
    I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
    The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
    All parameters except the extra "Model" are shared between the sheets.
    When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
    When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
    If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
    Booooo.
    Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
    Has any body run into this behavior? Is there an answer?
    -- Ron Olcott, Business Intelligence Product Manager

    What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
    John DIckey

  • How to run the query in  screen painter

    i am using the patch 36 in business one so pls give information  about 
       how to run the query in  screen painter 
    regard
      sandip adhav

    Hope u have reached Screen painter interface,
    1. Click 'Add Grid' from tool bar.
    2. Go to 'Collections' tab in 'Properties' window.
    3. Choose 'Data Tables' from the Drop down list.
    4. Click 'New' found at the bottom of the Properties Window(same window)
    5. U'll find the place to insert ur query.
    6. U can rename the table name from 'DT_0'
    7. Choose type as 'Query'
    8. Clear content from box 'Query'
    9. Enter ur query there. Dont forget to Click 'SET'
    10. Go to Preview option from tool bar.
    now ur query will be displayed as table format.
    Note: First try with simple query b4 going for linking option.
    Regards,
    Dhana.

  • Problem with running the midlet class (Error with Installation suite )

    hi everyone...
    i have problem with running the midlet class(BluetoothChatMIDlet.java)
    it keep showing me the same kind of error in the output pane of netbeans...
    which is:
    Installing suite from: http://127.0.0.1:49296/Chat.jad
    [WARN] [rms     ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
    i also did some research on this but due to lack of forum that discussing about this,im end up no where..
    from my research i also find out that some of the developer make a changes in class properties..
    where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
    i did that but also didnt work out..
    could any1 teach me how to fix it...
    thanx in advance... :)

    actually, i do my FYP on bluetooth chatting...
    and there will be more than two emulators running at the same time..
    one of my frens said that if u want to run more than one emulator u just simply click on run button..
    and it will appear on the screen..

  • How i can obtain explain plan without run the query

    Hello,
    i need to know the result of explain of a query without run the query, it's this possible?
    Thanks and best regards.

    explain plan for <your query>;
    select * from table(dbms_xplan.display);Regards,
    Rob.

  • Once the aggregated cube how to run the query

    hai ,
    i had cube havind lot of data .
    so i was used aggregation .
    after that how to run  query from aggragated cube
    when ever i went to rrmx . but it has showing not aggregated cube.
    once aggregate the cube where is stored
    plz let me know

    InfoCube aggregates are <b>separate database tables</b>.
    Aggregates are more summarized versions of the base InfoCube.  There is an aggregate fact table, e.g.  /BIC/E1#####  ===>  /BIC/E100027.  If you don't automatically compress your aggregates, there would also be an F fact table /BIC/F100027,
    There are aggregate dimension tables that are also created, e.g. /BIC/D1000271.  If a dimension for the aggregate is the same as the base InfoCube, then there is no aggregate dimension table for that dimension and the queries will use that dimension table from the base cube.
    As long as the agggregate is active, the BW automatically will use it instead of the base cube as long as the aggregate contains all the characteristics necessary to satisfy the query. 
    You can verify the aggregate's usage by looking at info in table RSDDSTAT - it will show the Aggregate number if used (will not show aggregate usage for queries on a MultiProvider if you are on a more recent Svc Pack).
    You can also run the query thru RSRT, using the Exec & Debug option - check the "Display aggregate found" option and it will display what aggregate(s) it found and which one(s) it used.

  • Run the query with previous weeks date automatically

    Hi Guyz,
    I need to  dynamically populate the previous weeks  date value every week,
    i.e Run the query every Monday automatically, with previous weeks date value .
    Is there any SAP Exit which I can use ??
    Regards,
    Ravi
    Edited by: Ravi Srinivas on Aug 4, 2009 1:40 PM
    Edited by: Ravi Srinivas on Aug 4, 2009 1:52 PM

    Ravi,
    If you are thinking of re-running the previous week's queries automatically in the front-end, then U. Tummers is correct.  You can create new columns alongside your existing query if you so wish and use your restrictions with an offset sepending on how far back you'd like to go.
    Best,
    Philips

Maybe you are looking for