System error when send file with Sender File Adapter

Hi all,
I have configured a "File To ABAP Proxy" scenario. After configuring, i executed a "Test Configuration" in Integration Directory and it's all OK. But this file unable to reach into ABAP Proxy Target. In the Runtime WorkBench\Message Monitoring, I get an error message in below:
Engine: Adapter Engine
Status: *System Error     *
Start: 15.08.2008 14:04:01
End: 15.08.2008 14:19:01
Sender Service: BS_XI_SERVER
Interface Servic: urn://FILE_TO_PROXY
MI_EMPLOYEE_OB
In this case, I don't know why my Sender File Adapter is error and why status is "System Error" and why it can't reach into Target System. Can it concern a role user?
( For more clearly: I configured the source file and the path correctly. And i used the xml file with the content and the document name correctly. In general, the Sender Adapter File don't convert the sender file and its content is same as the Payload in the "Test Configuration", i think it is all OK.)
Could anyone please help me to resolve this problem, anyone can explain this error, how can i resolve this error?
Thanks a lot in advance,
Vinh Vo

Hi Chirag,
1.I source structure is very simple as below:
<ns0:MT_MATERIAL xmlns:ns0="urn://FILE_TO_PROXY">
   <MATERIAL>
      <WERKS>1000</WERKS>
      <MATNR>MAT00001</MATNR>
      <MAKTX>Chemical Material</MAKTX>
   </MATERIAL>
</ns0:MT_MATERIAL>
2. the Communication Channel Monitoring in Runtim WorkBench\Adapter Engine is OK for my Sender File Communication Channel, it's in Blue Light.
However, i don't know what's FCC?
Thanks and best regards,
Vinh Vo

Similar Messages

Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

Convert Screen(spool) to PDF file sending mail with attach file

Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do <b>NOT</b> have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!

Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist         LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali        LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type     LIKE soodk-objtp.
DATA: sp_lang       LIKE tst01-dlang.
DATA: line_size     TYPE i VALUE 255.
DATA: v_name        LIKE soextreci1-receiver.
DATA rec_tab        LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
     EXPORTING
          rqident              = p_spool
          first_line           = 1
          last_line            = 0
          desired_type         = '   '
     IMPORTING
          real_type            = real_type
          sp_lang              = sp_lang
     TABLES
          buffer               = so_ali
     EXCEPTIONS
          no_such_job          = 1
          job_contains_no_data = 2
          selection_empty      = 3
          no_permission        = 4
          can_not_access       = 5
          read_error           = 6
          type_no_match        = 7
          OTHERS               = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
                 + STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
      'U'      TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
     EXPORTING
          document_data              = document_data
          sender_address             = v_name
          sender_address_type        = 'B'
     TABLES
          packing_list               = plist
          contents_bin               = so_ali
          receivers                  = rec_tab
     EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren

Send mails with csv file as an attachment through oracle(SQL SCripts / Stor

Hello Everybody,
I have recently come across a requirement in which I am supposed to send mails with csv file as an attachment through oracle(SQL SCripts / Stored Procedure) .
The contents of the csv file are to be retreived from the Database as well as the content of the mail and to whom it needs to be sent has also to be picked up from the database.
Can somebody suggest me with a suitable code for the same?
Would be of great help..!!
Thanks & Regards,
- VR
Edited by: user646716 on Dec 18, 2009 10:44 AM

read below links
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:255615160805
http://www.orafaq.com/wiki/Send_mail_from_PL/SQL#Send_mail_with_UTL_TCP_-withattachments
How to send csv file as an attachment

Shell Script to send email with .txt file as attachment

Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!

978334 wrote:
Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!http://bit.ly/XHfSCz
https://forums.oracle.com/forums/search.jspa?threadID=&q=sendmail&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Problems converting PDF to MS Word document. I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the co

Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

[svn] 1774: Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials .

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Send mail with attached file without using Repository

Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
Elad

Elad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh

System error when archiving a photo/file

Hi Experts,
here we are using EP 7, and MAXDB 7 as backend and SAP content server AIX 5.3, apache 1.3, when we are checking in SAP content server srkp09, we tested all 3 possibilities like single test, multiple test, and runtime test all the tests are successful, as part of portal side for a employees chnage own data we are trying to attach a photo ->Review and save -> we getting message attachment save to Database. !System error when archiving a photo. please advice how to rectify this problem ? is this is part of content server issue or portal issue.
waiting for your quick help on this
Thanks & Regards
VenkataSurya

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

Error when trying to create class file

I am getting this error when I try to create file
clobsearch.java:246: not a statement ex;
protected Element getDocumentRoot(Clob c)
Element root;
Reader read = c.getCharacterStream();
String s = convertClob(read, 8192);
SAXReader sread = new SAXReader("org.dom4j.io.aelfred.SAXDriver");
sread.setMergeAdjacentText(true);
sread.setStripWhitespaceText(true);
Document doc = sread.read(new StringReader(s));
root = doc.getRootElement();
return root;
Exception ex;
ex; <--- this is line 246
System.out.println(ex.getMessage());
return null;
any help would be appricated
thanks
robert

The guy who wrote this code is no longer with the company
the server IP got changed and he had an IP coded in the program
i managed to uncompile the code
i changed the IP to the new one
when I tryed to create the class file i get the error
so as far as what is happenning with the ex I am not sure
here is another piece of code that might help
really all i need to do is get the class file created again...
protected Element getDocumentRoot(Clob c)
Element root;
Reader read = c.getCharacterStream();
String s = convertClob(read, 8192);
SAXReader sread = new SAXReader("org.dom4j.io.aelfred.SAXDriver");
sread.setMergeAdjacentText(true);
sread.setStripWhitespaceText(true);
Document doc = sread.read(new StringReader(s));
root = doc.getRootElement();
return root;
Exception ex;
ex;
System.out.println(ex.getMessage());
return null;
protected double toDouble(String s)
double d = 0.0D;
try
d = Double.parseDouble(s);
catch(NumberFormatException ne) { }
return d;
protected String convertClob(Reader in, int blen)
StringWriter sw = new StringWriter(32768);
char buf[] = new char[blen];
int len = 0;
try
while((len = in.read(buf)) != -1)
sw.write(buf, 0, len);
in.close();
sw.close();
catch(IOException ioe)
len = 1;
return null;
String s = sw.toString();
int q = s.indexOf("<Quote");
int end = 0;
if(q == 0)
end = s.indexOf("</Quote>") + 8;
} else
q = s.indexOf("<Project");
if(q == 0)
end = s.indexOf("</Project>") + 10;
else
end = s.indexOf("</Order>") + 8;
return s.substring(0, end);
public static void main(String args[])
if(args.length < 2)
System.out.println("Usage: clobsearch tablename [searchpattern] [datesql]");
System.out.println("Where: searchpattern like \"Geodesic Dome\" and datesql like \" where quotedate >= to_date('01/01/2004', 'MM/DD/YYYY')\"");
System.out.println("OR: clobsearch tablename searchpattern -data idfile [idcolname]");
System.out.println("Where: searchpattern as above, idfile is a one per line file of quote or order numbers, idcol=column name for id col");
System.exit(1);
clobsearch cs = new clobsearch(args);
}

Photoshop CS6 keeps freezing when I work with large files

I've had problems with Photoshop CS6 freezing on me and giving me RAM and Scratch Disk alerts/warnings ever since I upgraded to Windows 8. This usually only happens when I work with large files, however once I work with a large file, I can't seem to work with any file at all that day. Today however I have received my first error in which Photoshop says that it has stopped working. I thought that if I post this event info about the error, it might be of some help to someone to try to help me. The log info is as follows:
General info
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988950
Exception code: 0xe06d7363
Fault offset: 0x00014b32
Faulting process id: 0x1834
Faulting application start time: 0x01ce6664ee6acc59
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Photoshop.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: 2e5de768-d259-11e2-be86-742f68828cd0
Faulting package full name:
Faulting package-relative application ID:
I really hope to hear from someone soon, my job requires me to work with Photoshop every day and I run into errors and bugs almost constantly and all of the help I've received so far from people in my office doesn't seem to make much difference at all. I'll be checking in regularly, so if you need any further details or need me to elaborate on anything, I should be able to get back to you fairly quickly.
Thank you.

Here you go Conroy. These are probably a mess after various attempts at getting help.

I keep getting this error when I publish the SWF file.

I keep getting this error when I publish my SWF file.
Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts.
ReferenceError: Error #1065: Variable TLFTextField is not defined.
And these compiled errors
Symbol 'Symbol 6', Layer 'Layer 1', Frame 1
Warning: The instance name 'staff' is declared on an object of type fl.text.TLFTextField but there is a conflicting use of the instance name 'staff' on an object of type flash.display.InteractiveObject.
Scene 1, Layer 'action', Frame 1, Line 7
1061: Call to a possibly undefined method gotoAndPlay through a reference with static type fl.motion:AnimatorFactory.
Scene 1, Layer 'action', Frame 1, Line 3
1061: Call to a possibly undefined method addEventListener through a reference with static type fl.motion:AnimatorFactory.
This is the only action script 3.0 script that I wrote.
import flash.events.MouseEvent;
skipbtn.addEventListener(MouseEvent.CLICK, btnClick);
function btnClick (event:MouseEvent):void{
skipbtn.gotoAndPlay("home");

the first line is a warning, not an error.
and you have more actionscript than you think. open the movie explorer panel and toggle the actionscript only button to find all the actionsript in your fla.

Why am I getting an error when I place two OAM files one after the other in different pages?

Why am I getting an error when I place two OAM files one after the other in different pages? They do not load or play correctly. They are both configured to play automatically with a .125 second delay and both have a white rectangle "poster" over for a hidden effect.

Thanks for the idea, Scott! I initially tried your idea, but my OAM files were still not loading correctly. I tried other combinations of OAM files, and it seems to work fine.
Back to my original OAM files: I made sure that my elements in my Edge Animate project had different names. I originally copied parts of some elements from one to another, and I think it was confusing to DPS to read it.

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

System error when send file with Sender File Adapter

Similar Messages

Maybe you are looking for