Problem in sending email ??
Hi Guys
we are facing a strange problem. We have a lot os programs which sends emails from SAP. Since this week the system is not sending any emails. Once the program is executed the program generates the emails which we can see in the SOST transaction. It is NOT in ERROR but still it is not sent to the inbox( internet).
All the messages are staying in the queue with the message 711. When i check the long text of this message it says
<i>Message transferred by node to communication system
Message no. XS711
Diagnosis
The node has passed the message to its communication system.
System Response
Processing was ended normally.
Additional information on the node used (in the system language of the node):
Procedure
No action is necessary. The message will shortly reach the recipient.
</i>
But we have waited for one complete day and the emails are still in the queue. Any idea what is missing. I also tried to select the unsent emails and Force send it but it still did not work. I then executed the RSCONNECT program to send all the emails still it did not work.
Any idea????????
~Suresh
Hi Suresh,
As you are saying that the mail functionality was working fine last week and not working during this week that means there must be something changed. May be you have not applied support pack but basis may have changed system parameters, or check with the batch jobs if they are working fine.
Regards,
Atish
Similar Messages
-
Problem in Sending email from Reports Queue Manager
Hi
I am getting problem in sending email from reports queue manager.
It says that error in logging to mail server.
If any body knows the sol then pl help me out.
thanksHi
I am getting problem in sending email from reports queue manager.
It says that error in logging to mail server.
If any body knows the sol then pl help me out.
thanks -
Having problems in sending email..always saved in outbox and cannot send bcoz of server failed
The email server you are using to send mail through requires the password, if any is required it needs to be set in the location that I pointed out in the earlier post.
It is usually the same password you use for receiving emails.
I don't use either Facebook or Twitter so I am not sure how to help with those. -
I'm having problems receiving/sending emails thru Outlook.
I switched internet connection from AT&T to Comcast and I'm still utilized several AT&T email address's for free. I'm having problems receiving/sending emails thru Outlook. Could the problem be due to using their free emails with no support.
Do I have to go thru yahoo to read/send emails?Change the ISP would not effect the email connection generally. (Only when ISP disable your mailbox which they could control directly.)
I suppose that your Outlook still store/cache the AT&T messages, try to export them as PST data file for backup.
Setup the new Yahoo in your current Outlook first and then import that backup.pst to continue to use.
http://support.microsoft.com/kb/287070/en-us
Thanks
Tony Chen
TechNet Community Support -
Having problem to send email with POP account ...
Hi,
I didn't have that problem before upgrading to my new 3GS iPHone. I have 3 email accounts on my iPhone: POP (videotron.ca), GMail and MobileMe. They all work fine except my POP account.
From the POP account I can receive my email but I cannot send any. Funny enough, my emails are sent when the account is desactivated from my «Mail, contacts and Calendar» preferences on my iPhone.
Can somebody help me ? Regards.
RobertHi Robert,
I upgraded with the Iphone 3Gs a week ago and got the same problem with Videotron. The problem is with videotron as usual. If you want to be able to send email from your Iphone just go to Gmail, open an account FREE with them and then use this account to send Email...Work perfectly OK with me. Then of course you will have to phone videotron to make sure your account is fully available when you go on there Web site open the read email and be able to read your email if not solve the problem with them by phone. unless you will be able to send email easily with gmail and mather of fact it is free.
Hope this will help from Quebec to Quebec!!! -
Problem in sending Email notification from BPEL
Hi,
i am trying to send email from BPEL using Email activity.Using SoaSuite10.1.3.3
i configured the ns_emails.xml file properly as below.
when i run the process, it is executing fine without any error.
but i am not receiving any mail.
even i applied patch set p6148874 also.
below pasted is the ns_emails.xml file.
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Oracle BPM</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>domain.com</SMTPHost>
<SMTPPort>25</SMTPPort>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>domain.com</Server>
<Port>110</Port>
<Protocol>pop3</Protocol>
<UserName>ckommalapati</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">Chandu@1205</Password>
<UseSSL>false</UseSSL>
<Folder>Inbox</Folder>
<PollingFrequency>1</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
Even i tried adding <AuthenticationRequired> details to the above and its not working.
i restarted the server after modifications.
i tried pinging the SMTP server of my domain, and its connecting successfully.
Could any one suggest me the solution for this problem.
is there anything extra need to be configured for this..?
Thanks in advance.Hi, ravigali :
Following are some steps I take to set Email notification in BPEL:
A important thing: get the right parameters of your Email server.
Step:
1. Alter ns_emails.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory), an example is as following:
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
EmailMimeCharset=""
NotificationMode="EMAIL">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>*Your Name*</FromName>
<FromAddress>*Your Email: ***@***.com*</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>*mail.***.com*</SMTPHost>
<SMTPPort>25</SMTPPort>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>*mail.***.com*</Server>
<Port>993</Port>
<Protocol>IMAP</Protocol>
<UserName>***@***.com</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">***</Password>
<UseSSL>true</UseSSL>
<Folder>Inbox</Folder>
<PollingFrequency>1</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
</EmailAccounts>
Note: the detail explain of every XML element is in http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#sthref324 (2.2.1 Configuring the E-mail Server)
2. Add the following property to wf_config.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory):
<property name="oracle.bpel.services.notification.publisher_interval" value="1" />
Then the BPEL server will send notification every 1 minute. More detail about this configuration to see http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/notif.htm#sthref1678 (14.2.1 Reliable Notification Service).
3. Re-start all SOA Suite services. (opmnctl startall)
After the BPEL process invoke any E-mail notification activity and if we can’t receive any E-mail notification, we need to check the BPELNOTIFICATION table (ORABPEL database schema). And delete any error data in this table, then correct the E-mail notification setting through above steps and re-start all SOA Suite services.
Thanks,
Melody -
Problem in sending email to other domain users
Hi All,
I am using javamail for sending emails and able to send to people within my exchange server domain. The problem is i am unable to send mail to other domain users like yahoo.com, hotmail.com..the error it is throwing out is *"Invalid Address"*
Is there any spaecial API for this to work?
Thanks,
KishoreMore details, please.
Please read the JavaMail FAQ. Post the protocol trace if you can't figure it
out yourself. -
Problems with sending email about SO_OBJECT_SEND
Hi,
I have to send html emails from a ABAP Program and have found the module SO_OBJECT_SEND. When I fill in the data and call the function, I got the exception "OWNER_NOT_EXIST". In my userdetails, I have typed in my emailadress.
My parameters, I use for the function call:
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
w_object_hd_change-file_ext = 'HTM'.
receiver_list-recextnam = '[email protected]'.
receiver_list-recesc = 'E'.
receiver_list-sndart = 'INT'
receiver_list-sndpri = '1'.
I have one line in objcont, object_type = 'RAW' and owner = sy-uname.
Does anybody knows the problem?
Cheers ArneDATA: ds_object_hd_change LIKE sood1.
DATA g_object_type LIKE sood-objtp VALUE 'RAW'.
clear it_asci.
INSERT it_asci INDEX 1.
it_asci-line = 'Comment: '.
it_asci-line+14 = g_comment.
INSERT it_asci INDEX 1.
it_asci-line = 'Transaction: '.
it_asci-line+14 = g_tcode.
INSERT it_asci INDEX 1.
ds_object_hd_change-acout = 'X'.
CONCATENATE 'Employee AD & D Insurance'
sy-uname
INTO ds_object_hd_change-objdes
SEPARATED BY space.
CONCATENATE g_user_id '@yahoo.com'
INTO it_recv-recextnam.
it_recv-recesc = 'U'.
it_recv-sndex = 'X'.
it_recv-sndcp = 'X'.
APPEND it_recv.
Send email to security admin
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = ds_object_hd_change
object_type = g_object_type
TABLES
objcont = it_asci
receivers = it_recv
EXCEPTIONS
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
originator_not_exist = 20
x_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
WRITE: / 'Error: Cannot sent email (code=', sy-subrc, ').'.
ELSE.
MESSAGE s002 WITH 'Message sent'.
ENDIF.
hope this will solve ur problem
vijay -
Problem in sending emails to someone who has thesame domain
Hi Everybody,
First of all this is my first post and it is really impressing me seeing this great community for BB users.
Well, my colleagues in the company have some issue in sending internal emails "Same domain", we are not using BES, and we are on BIS.
After investigations I found out that they don't store their emails on Exchange Server, so I thought it would be the problem so I enabled the Exchange to keep a copy of their emails in the server and still not working. Rather than that they are able to send emails to anybody except their colleagues in the company. In addition, I'm able to do so myself and I have no issues in sending internal emails!
Really appreciate your help.
TarekMore details, please.
Please read the JavaMail FAQ. Post the protocol trace if you can't figure it
out yourself. -
Hello I am having problems sending emails to one particular address. I used to be able to send them OK, but recently for some reason I don't understand and neither do they, my e-mails bounce back with the following error message: 5.1.0 - Unknown address error 553-'5.3.0 Spam blocked see: http://spamcop.net/bl.shtml?62.24.202.76' Reporting-MTA: dns; out.ipsmtp4nec.opaltelecom.net Final-Recipient: ( email address blanked for privacy by me!) Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [86.17.6.22] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 553-'5.3.0 Spam blocked see: http://spamcop.net/bl.shtml?62.24.202.76' (delivery attempts: 0) I have no idea what this means. Can any one explain? Is this a fault on my computer or their - I think they use apple iMAc Many thanks in advance for any assistance Rarmy
Thanks. I wondered if thats what all that meant ( being a computer illiterate). My friends actually use PCs- and they have a virus checker system that constantly updates and I wondered whether that had affected our email traffic as we've been fine up until recently. Heigh ho - they are even less computer literate than me- so I guess no more emails! Thanks
-
Relaying problem when sending email
Hi All,
I have read all of the forums regarding this type of problem but I am still unable to send email to outside addresses such as hotmail or yahoo. I can send to internal email adresses without a problem. I have tried autheticating myself with the server first but that didn't make a difference and I cannot make changes to the exchange servers settings for relaying like someone suggested. I know the server is setup correctly because I can send email to external accounts with my desktop outlook client. Can someone please take a look at my code and tell me if their is a problem with it. Thanks in advance!!
public void execute(javax.mail.Store store, Hashtable variables) throws Exception
// Get system properties
Properties props = System.getProperties();
// Setup mail server
props.put("mail.smtp.auth", "true");
props.put("mail.transport.protocol", "smtp");
props.put("mail.smtp.host",store.getURLName().getHost());
// authenticate myself with the server
Authenticator authenticator = new ServerAuthentication(myUsername, myPassword);
// Get session
Session session = Session.getDefaultInstance(props,authenticator);
session.setDebug(true);
// Define message
MimeMessage message = new MimeMessage(session);
message.setReplyTo(new Address[] {new InternetAddress("[email protected]")});
message.setRecipient(Message.RecipientType.TO,
new InternetAddress(((String)variables.get("msgTO")).trim()));
message.setSubject((String)variables.get("msgSubject"));
message.setText((String)variables.get("msgBody"));
// Send message
Transport transport = session.getTransport();
transport.send(message);
transport.close();Hello,
I'm in the situation than yours.
Here is the code I use to send emails. I had problem with authenticator.
Transport transport = session.getTransport("smtp");
transport.connect(server, login, password);
transport.sendMessage(mimeMessage, mimeMessage.getAllRecipients());
transport.close();
Hope this help -
Problem with sending email .
Hi,
I am using SO_NEW_DOCUMENT_ATT_SEND_API1 fm to send email with one excel attachment. But while sending the mail the body of the mail is converted into one PDF file and it is attached along with the excel attachment. so i am getting two attachment and the body of mail is blank. my requirement is to send attachment along with the body of message.
I have checked in the outbox , the mail is sent in the required format with one excel attachment and body of mail. but while receiving the mail body is comming as a pdf attachment. is there any configuration problem. pl help me to solve the problem.
Regards.
Biswaeven look at SOST Status and Try to set up sap inbox and send email to your sap inbox.
if you get same problem and should be configurational issue or techinical issue.
Reward Points if it is helpful
Thanks
Seshu -
Problem with send email to recipients From recordset behavior
Hello
I use the ^send email to recipients From recordset^ behavior, then words of the subject of sent email stick and the spaces between words in subject removed.
E-Mail charset is utf-8 and language is Persian
for example:
موضوع ايميل من
will be change to:
موضوعايميلمن
notice: spaces are removed
To overcome this problem, please help me
sorry, i'm not good in english
ThanksPersian language is very similar to arabic language
Please help me, I can't solve this problem -
Problem in sending email in SAP system
Hi Gurus - I'm trying to trigger email from the output type in ECC 6.0. Output has been successfully processed(Green), but the recipient is unable to receive email.
In Transaction code, SOST, the status of the message is showing as sent and in Transaction SCOT, the status of the messages is showing as "In transit". Can you please assist us to find the solution to the problem.
Thanks,
SreeDear Sreedhar,
Are you facing this problem while sending to all mail Ids ?
Please try to send common Ids like yahoo, gmail etc...Is there any attachment in your mails ?
Probably these problem is because of the Firewalls are blocking the mails .
In SOST it is green means from SAP has sent the mail and Exchange server has to do the rest .
Troubleshoot in that area by asking the Exchange Admin .
Regards,
Nibu -
PDF fillable form problem with sending email
I created a fillable form on a PDF. I used the "emailto:" setting correctly. I have tested it out on numerous computers throughout my company and it has appeared in the email inbox of my supplied email with no problem. However, when my manager went to test the "Submit by Email" button I created on the PDF fillable form, it does not sync up with the "Select Email Client" box. It starts to do a 'send/receive" on her Microsoft Outlook. When I go and check to see if it sent anything at all to the designated email inbox it sends like 15 forms (some of them open and some of them do not). I assume that is just from her clicking a zillion times. But, I am curious to figure out why the "sent/receive" button appears on the bottom right-hand corner of her screen?!
Is there a security setting that she might not have clicked that everyone else does? Also, the "Print Form" button I created right next to the "Submit by Email" box works perfectly.
Any help is appreciated!In article <[email protected]>, Scarab wrote:
> For example I`ve got [email protected], [email protected],
> [email protected] accounts in my GW system. I`ve got [email protected]
> account on non-GroupWise system. I`d like to have group alias to send
> emails simulateusly to [email protected], [email protected],
> [email protected] and [email protected] and group alias must be in
> example.com domain. That`s why I configured [email protected] alias in
> non-GroupWise system but it doesn`t work with GroupWise IMAP.
>
Now we are even more confused
- system GW knows itself and answers for example.com
- system other knows itself and answers for __________?
You used example2.com in your above which is different from what you
started out with. And now you are mentioning IMAP that you haven't
mentioned at all before. Perhaps you are writing faster than you are
thinking and missing getting the key data into here, and that makes it
difficult for us to constructively help you.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037
Maybe you are looking for
-
Safari" (4.0.3) problems
Hi, yesterday I updated with the new safari update, i noticed before it said to fix some problems including a greying effect on some website pictures, i didnt have this problem but with this new update I do, some websites have this grey box effect ov
-
i just updated my premiere to the latest version (cc 2014) and when i try to import mts files it gives me an error message that the file compression type is not supported. i have tried to rename the folder as well as deleting the media cache files, i
-
Delete or modify tip text in Word Search
How do I delete or modify the text in attached image?
-
How do I calculate fuel consumption?
Hello As a long-time newbie to Numbers 2.1, I came across a long-term problem I haven't been able to solve: How do I calculate the fuel-consumption of my car based on refuel-amount and mileage indicator? I think I should do as follow: purchased_fuel
-
Hi, when I created a tree with an employees table, I created an entity object, association about manager foreign key, view object, and view link. There is a recursive tree to be created. But when I just created a view object and view link to create a