Problem in setting auto trace

Hi,
While setting autotrace i get the below error,
SQL> grant all on plan_table to user;
Grant succeeded
SQL> grant plustrace to user;
Grant succeeded
connecting through the user i get this error
SQL> set autotrace on;
SP2-0613: Unable to verify PLAN_TABLE format or existence
SP2-0611: Error enabling EXPLAIN report

Hi,
Here is what I do to set autotrace :
http://asktom.oracle.com/tkyte/article1/autotrace.html
Hope it helps you too.
Regarding the error you are getting:
SP2-0613: Unable to verify PLAN_TABLE format or existence
SP2-0611: Error enabling EXPLAIN report See:http://www.samoratech.com/tips/swenableautotrace.htm
Cheers,
Marcello M.
Message was edited by:
Marcello M.

Similar Messages

Auto-trace mask order?

Hey all,
I'm using auto-trace to perform a stroke by stroke reveal of scanned hand-written text. The problem is the auto-trace feature places the masks in a fairly random order, as opposed to left-right or top-down. It means I need to manually reorder the masks to get the effect working as a write-on reveal. I'd normally just trace the scan with a mask and do it the old-fashioned way but there's some shape wiggle effects I need to place over the text in this case, so the masks have to stay. Any way to make the process a little easier in terms of the auto-generated mask ordering?
Cheers

It's inherent in how this simplistic tracing algorithm works. The order of the detected regions is completely arbritray, hence is the mask order. Short of using Illustrator's Image trace quite selectively on a letter-by-letter basis, I see no way to get a more orderly initial result.
Mylenium

Problem in set session varibales

hi
i have a problem in set roles varibale in OBIEE 11.1.1.6
i use a initialazion block and row-wize initialization
but it set the ROLES varibvale just by BIConsumer and Authenticated user
and it does not set my values
what should i do??
thanx for any help
medi

Hi Atul,
>> I am facing problem that in Item master "Set GL By" changes from Item level to Item Group automatically
I am not sure whether my reply will be of any further help to you or not!
However, would you please check whether this behaviour is also reproducible in demo database (say OEC computers) or any other database on the same server environment.
If you are able reproduce the same problem in all databases that are configured in your current server environment, I recommend to report the issue to support via a ticket (if not created already).
If the problem is with only one database then as already recommended by other experts on this thread:
1. Comment all user code in Stored procedure
2. Verify if any formatted search queries are active on Item Master (like auto number generation, like ...)
3. Is there any add-ons that are active on Item Master
Would appreciate if you also write back whether you are not able to update on change of "Set GL By" (or) it is getting changed automatically from item level to Item group.
Good Luck.
Regards
Satish

Problem in Set GLby in Item Master

Dear All,
I am facing problem in set GL by method in item master, In my master I have defined some items with warehouse determination, some items with Item group determination and few items with Item level determination.
but in case of items for which i have set GL by item level are automatically changes to item group as i have determined GL at item level and my item group GLs are blank system wont allow me to transact as there is no account in item group and anyway it is not desired .
anybody has faced problems like that and what would be the possible solution
Thanks,
Regards,
Atul Joshi

Hi Atul,
>> I am facing problem that in Item master "Set GL By" changes from Item level to Item Group automatically
I am not sure whether my reply will be of any further help to you or not!
However, would you please check whether this behaviour is also reproducible in demo database (say OEC computers) or any other database on the same server environment.
If you are able reproduce the same problem in all databases that are configured in your current server environment, I recommend to report the issue to support via a ticket (if not created already).
If the problem is with only one database then as already recommended by other experts on this thread:
1. Comment all user code in Stored procedure
2. Verify if any formatted search queries are active on Item Master (like auto number generation, like ...)
3. Is there any add-ons that are active on Item Master
Would appreciate if you also write back whether you are not able to update on change of "Set GL By" (or) it is getting changed automatically from item level to Item group.
Good Luck.
Regards
Satish

Problem when create auto numbering in BP master using Formatted Search

Hi all,
I have a problem in creating auto numbering in BP for Customer type using Formatted search
My query is like this
declare @tempNo as char(20)
set @tempNo=(select Isnull(max(REPLACE(OCRD.CardCode , LEFT(OCRD.CardCode,10),'')),0) + 1
from OCRD where (CardType ='C') and LEFT(OCRD.CardCode,3) = 'CU.' )
set @tempNo='CU.'left(convert(varchar,GETDATE(),112),6)'.'+@tempNo
select cast(@tempNo as char(20))
It should be creating the new number for example
CU.201101.1
CU.201102.2
CU.201103.3
CU.201103.4
The format will be like this CU.YYYYMM.autonumbering
So if the current year is still the same it will always increase the number and it will reset the number become 1 if the current year is change.
But when i execute the number , the number doesn't increase, still generate the last number CU.201103.4
I have use this query in generate item number, it runs well but different format.
Is there some thing wrong with my query?
Thanks in advance
Regards
Jia shun

Hi Jia shun,
You have posted an identical threads. There is no such need. Please close this one and response to the one with answer already.
Thanks,
Gordon

Is it possible use PPF to setting Auto Good Receive?

Dear Experts,
We met the problem in inbound process
When we packing the product to Handling unit in Inbound Delivery ,then we want to EWM system can be auto Good Receive.
Is it possible use PPF to setting Auto Good Receive?
I have tried to use Full Pack then Auto Good Receive. but it doesn't work.
Can anyone help us to solve this problem?

Hi Howard
Yes it is possible need to check action and execute with schedule condition when pack post GR.
check action and there process and method in this tcode and copy and use when create ID from IDN.
/nSPPFCADM
this action with execute when IDN converts to ID and it will check line item is packed in HU. If yes then post GR.
Regards
Suraj

Auto Trace in Illustrator CS5

I am not able to perform the Auto Trace function in Illustrator. When I bring up the Tracing Options dialog box from the Live Trace, my button in the top right corner does not say "trace". It says "set default". I have also seen it said that there is an Auto Trace drop down function in the menu bar. I also do not have this. I thought past versions of Illustrator had a tool that performed the auto trace function. I have the student version and am wondering if this is the reason I don't have this. Any help?

Maybe this will help...

Layer Auto-trace issue in AE CC 2014

Hello,
There seems to be a bug in the CC 2014 auto-trace layer command. When I execute the command the new traced layer does not appear in the comp above the original layer as it did in AE CC previously. Is there a new method? I also notice that the project and effects panels are no longer displayed side by side in CC 2014. I must switch between work-spaces in order to see the effects window on a given layer, then switch back to standard workspace to see the project panel.
Any help or education on these matters would be appreciated.
Thanks,
JB

Nothing changed regarding the default workspaces. I think that you may be mis-remembering the previous versions.
Also, regarding Auto-trace, nothing has changed. There is an option in the Auto-trace dialog box to apply the masks to a new layer. The default for that is off. After Effects remembers and uses the last setting, so if you set this on once, it stays on for subsequent uses. You probably changed it once in a previous version and forgot that you did so.

How to set auto backup as like quark express

Hi,
I want to know how to set auto backup opening files in InDesign 6 as like quark express

InDesign restores everything after a crash.
Versioning was removed aw hile ago, now you should set it up on OS or computer level or use a cloud service like dropbox which offers such functionality.
For formatting use Paragraph Styles, for exceptions use Character styles. It is a no-go to make a font bold, it must be done via styles. I think it is a problem with Quark documents that people bolded with the B button their text, this caused false styles and did no semantic styling which would not allow to create PDF/UA documents.
Paragraph and Character Styles are completely different in InDesign than in Quark. In InDesign every font property is defined in a paragraph style. Character Styles are only used for exceptions and only the different properties are defined. E.g. if you have black text and want some words or letters to be red the InDesign Character style would define only the property character color to red, everything else would remain empty. So you could apply the same character style to text with different paragraph styles with different fonts and sizes. In Quark you would have to set up a different character style for each paragraph style.

Problems with ADF auto submit.

Hi,
I am new to ADF application development and I face an issue while working with the auto submit attribute.Please help me if I am doing anything wrong. The scenario is as follows....
I have a adf table where columns values needs to be entered by the user thorough LOV, inputtext box and checkboxes. For the sake off validation to occur while typing manually in the lov fields we have included auto submit in LOV field. We have set auto submit to true to other fields also to set the values as in while we change it since it was refreshing the values to it previous state/empty when the LOV field get loaded.
Now the problem is that when I change value in a text field and without shifting the focus (the auto submit is not triggered yet), I click the check box (now auto submit is triggered for the input text box) to deselect/select. What happens is that the checkbox gets refreshed back to it previous state (since the change event for the input box is in progress when I clicked the checkbox).
What I do have in my code when I debug is the getter setter methods in the viewRowImpl class for that table view object is called 5-6 times before it renders the page. I tried to figure it out by understanding the phases in the life cycle but I couldnt get it right......
I like to add that i didnt implement any value change listener thinking it will increase complexity. Correct me if I am wrong.....
So pls help me with these .
1. how to make the checkbox persist even if I change it before the change event autoSubmit process is in progress for other fields.
2. Why is the getter methods called 5-6 time before it get the page rendered ?.
3. Is it a mistake I did implement the valueChangeListener to set the values.
4. Finally is there any alternate way to implement the above scenario more efficiently.
thank you.....

Hi subu,
I am sorry that have not got it right.... let me explain in with an example code.
<af:table value="............"
var="row"
rows="..........."
selectedRowKeys="........................."
selectionListener="........................."
rowSelection="single" id="t1" styleClass="SimpleTable"
contentDelivery="immediate"
columnSelection="none"
disableColumnReordering="true"
horizontalGridVisible="false"
verticalGridVisible="false" dontPersist="ALL"
partialTriggers="........................."
autoHeightRows="5"
binding=".........................">
<af:column headerText="..............................." id="c6" width="45">
<af:inputListOfValues id="bankTypeId" value="......" required="......" columns="...." autoSubmit="true">
<f:validator binding="..............................."/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="....," sortable="false" id="c3" width="75">
<af:inputText value="....." required="....." autoSubmit="true" id="it23" >
<f:validator binding="...."/>
</af:inputText>
</af:column>
<af:column sortProperty="PayableByBacs" sortable="false" headerText="......." id="c7" width="60" align="center">
<af:selectBooleanCheckbox value="...." autoSubmit="true" id="sbc2"/>
</af:column>
</af:table>
Now the when I change value in 'bankTypeId' (LOV) the other pre-entered values gets refreshed even though they have no partial trigger. So I have included the autosubmit to the checkbox and text field too.....
Now the value stays when I change the LOV field value. But When I enter a new value in the text field (it23) and without shifting the focus I change the selectBooleanCheckbox value. It load for a second and the value gets changed to previous value.
I think now I made myself little bit more clearer.... Pls do tell if there needs any more clarity.
Thank you.......

How to customize Auto-trace selection over multiple frames?

Hi all,
I'm working on an After Effects CS5 project that involves a lot of compositing and my material is all in high-contrast black and white. I'm looking for a way to mask individual parts of a particular clip: e.g. I have a 10 second clip with two people standing in it, one on the right and one on the left. I'd like to isolate the person on the right and hide everything else, including the background and person on the left.
I used Auto-trace to quickly find the outlines of my image and it works great since my picture is such high-contrast. Only thing is, I'm not sure how to remove the person on the left from the auto-trace selection.
I have "work area" selected in my Auto-trace options, which is amazing as it makes the Auto-trace selection span over my entire 10 second clip (as opposed to me needing to apply it frame-by-frame), but now the problem lies in removing person on the left from the entire 10 second clip. I went to the beginning of the new layer (I have the "Apply to new layer" box checked in my Auto-trace options), used the "Delete Vertex Tool" (the pen tool with a minus sign on it), and removed the selection of the person on the left, but the selection exists in all the frames following it (i.e. 9 seconds and 29 frames), and only gets removed from the particular frame I was working on.
Is there any way to get AE to remove the selection over the span of the clip as opposed to only the individual frame I'm working on?
BTW, I'm not married to this method. If anyone has a better method I could use, I'm all ears, although I would like to see this through if possible.
Any help is much appreciated!
Thanks
Mike

Thanks for the tips. I checked out the super tight junk matte tutorial, and this works well for green screened content but the issue I have is that my image is completely duotone - i.e. I only have black and white in the image. See here for an example:
http://mysite.verizon.net/vze15wlb3/IOBG012.jpg
So my challenge is trying to get certain portions of the image excluded, and I'm having a hard time doing this using rotobrush. In this case, I want to exclude the face on the left while auto-tracing or somehow rotobrushing the face on the right. Any other suggestions? I was hoping for an easier way short of applying tons of junk mattes and precomping.

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Problem in setting auto trace

Similar Messages

Maybe you are looking for