Problem in the calibration inspection

hi
I got a error regarding calibration inspection....
When creating the device category, i gave the calibration inspection as internal and period of year one year...
but when i am doing technical installation, it gives a error message as " in 2008 No replacement for the material with 0000 year"
can any one help me

Try this....
Go to EG05
and remove the calibration settings..you can do technical installation now.
Regards,
Narendar Konaknchi

Similar Messages

Problems with camera calibration

Hi!
I am trying to create a project that realises stereo vision with two cameras using the VIs provided by LabVIEW. During development I ran into problems with the calibration of my camera(s).
My questions are:
I would like to calibrate the camera-images with the IMAQ Learn Camera Model VI. For this purpose I have to show the camera a calibrational image (containing a group of points) in different angles. However even after multiple shots the value of the Insufficient Data part of the Internal Parameters output remains TRUE. I also experienced the same thing while running the Stereo Vision Example.vi. I held the calibrational image according to the directions in both cases. I would like to know what does this VI need for finishing succesful computations? Is the implementation of other VIs is necessary (apart from IMAQ Calibration Target To Points - Circular Dots VI)?
Another question: If I give a TRUE value to the Add Points And Learn input, will the VI use every previously given data for computation or it will use only the currently received values until I change it back to FALSE to start accumulating data after that?
I generated the data to the Reference Points input with the IMAQ Calibration Target To Points - Circular Dots VI. Are there other VIs with which I should use the Learn Camera Model VI?
Apart from the things listed above a general description of this VI (and the other calibrational VIs) would be very useful and maybe a simple example program that illustrates the function and work of the Learn Camera Model VI.

Hi nagy.peter.2060!
I found just a few hints and example:
Learn Camera Model
This VI has 2 images as input, Calibration Template Image and Grid Image
When First Image comes as input, we have to wire that image to Calibration Template Image.
We will only learn Grid of Calibration Template Image if and only if no Camera model is attached to the image.
If no camera model is attached, we have to learn Grid and calculate camera model and attach calInfo to Calibration Template Image
If Calibration Template image and grid image both are present, we have to learn grid of Grid Image and attach calInfo to Calibration Template Image.
I searched for examples related to camera calibration.
The example number 1666 illustrates how to use a calibration grid, either with a live acquisition or from a file, to correct for perspective distortion. The example documents the process for calibration as you learn a grid, apply the calibration information to your image, and then either correct the entire image or convert individual pixels to real-world distances. Link: http://ftp.ni.com/pub/devzone/epd/1666.zip
I found an other example without description, but it uses Learn Distortion Model VI. Please find the image of the VI attached, I hope it will be useful.
Balazs Nagy
Attachments:
vision.png ‏9 KB

Digital signatures for calibration inspection (inspection type 14)

Hi,
I want to use digital signatures for results recording and usage decision (ud) when performing a calibration (inspection type 14). Normally you'd set-up the material authorization for digital signatures. But this can't be added to maintenance plans or equipment. Is there any way to set-up digital signatures for calibrations?
Regards,
Maarten

Explore SAP Note 576307
It may help u.

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

I have been programming/interfacing VBAI2012 and LV2011 for two years already.
There is one very frustrating problem:
- Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
- and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
Is there any log file which I can check?

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

Problems with the audio jacks

I just received my factory refurb Thinkstation C30. I'm having problems with the integrated audio. I'm using Windows 8.1 Pro, installed myself over the factory Windows 7. It seems to be detecting the headphones incorrectly. The internal speaker never does anything, in any case. When the headphones are plugged into the front headphone jack, the Realtek control panel thinks its the pink jack, and the microphone tab appears. Plugged into the microphone jack, it thinks its the green and pink jack, and flickers rapidly between plugged in and not plugged in on the pink jack, microphone tab appears on and off.
Now for the back jack:
Blue identifies as blue, line in tab appears.
Green indentifies as both pink and blue (somehow), line in and microphone tab appear.
Pink idenfies as pink, with rapid on/off disconnecting. Microphone tab appears and disappears repeatedly.
The behavior seems to be the same with the generic Microsoft high definition audio driver, I installed the specific one off of the driver page to after I observed this behavior.
No sound ever happens from the headphones or internal speaker. In the sound control panel, my options are speakers on Realtek High Definition Audio, and AMD HDMI output (which I use for my speaker system). On my previous computer, plugging in headphones to the front panel would switch the output from HDMI to headphones automatically.
I do have 99 days left on the warranty if I need any parts for this, I'm wondering if the wiring in the USB/headphone jack assembly is whacky.

Silly question, but have you checked the orange connector that runs from the front panel to the motherboard to ensure it's plugged in correctly?
The fact that you're seeing ports flip back and forth between two different kind if inputs (or outputs) is odd. These ports do support jack sensing, but I would expect the flickering symptom you're describing. The fact that you're also not getting any output from the internal speaker in any condition is also concerning.
I'd inspect the cabling carefully to ensure everything is connected correctly and there is not apparent damage to the cables themselves. If everything looks good there, I'd probably go the warranty route. The problem certainly seems HW related from what you're describing.

Set up Calibration Inspection in Inspection Interface

Hello,
I’m currently designing an inspection interface “front panel” for a program that detects faults in caps. I’ve been having a look at some of the features that are offered in the interface and I was wondering if there is a way I can perform an edit calibration in the inspection interface. Thanks for any response.

Actually, the Calibration step in VBAI allows you to dynamically relearn calibrations based on previous points. The simple calibration and point distance calibrations allow you to use previous points to update the calibration. On the second tab of the calibration step, check the relearn option. All calibration types allow you to dynamically adjust the calibration origin/angle based on previous points using the same relearn flag in the calibration step.
If you want to permantely update the calibration, you can check the "Save Image Calibration to File" option on the first tab of the calibration step.
Hope this helps,
Brad

Color managment - CS4 doesnt seem to be using the calibrated profile

This problem has been plaguing me since setting up a dual screen.
My main screen is a dell 2410. I have calibrated it with an eye1.
My test prints from 2 seperate pro labs arent the same as what I see on my screen from inside PS. BUT are perfect to how the image appears when viewed in windows. If I soft proof within PS to 'monitor RGB', it is perfect to the print (which is redder than how it is appearing in PS)
It is as if PS isnt using the right profile.
I've double checked that my main monitor is set to the calibrated profile as default in windows color management for Win7
The colour setting in PS are set to Nth american general purpose....but when I fiddle around with comparing it to the soft proofing profiles it goes back to 'custom'
I'd appreciate any thoughts
Rowena

I installed Toshiba bluetooth Stack 8.00.03 as non-TOSHIBA USB Bluetooth adapters. I paired "AND UA-767PBT-C" which is Continua compliant Blood Pressure monitor with Bluetooth manager in netbook and the device is listed as one of the connection in Bluetooth settings. But in Toshiba bluetooth settings windows, the AND device is appearing with status as "Not Connected". When I try to connect, I get message as "Connect from health care ready application.". I went to "options" - "other" - "Health Device Settings" and checked "Displays a message when data is received from the Healthcare Device".
When I get the readings from Blood Pressure monitor, no data comes on the computer's system tray or Toshiba bluetooth application. What should I do so that I can view the readings from blood pressure monitor onto the computer? In the manual it is mentioned that Toshiba bluetooth stack will display the readings on the computer.
Do we have to use any APIs to get the readings out of Toshiba's bluetooth stack?.
Any help is appreciated.

Auto creation of calibration inspection lot thru maint. planning/scheduling

Hi
I have to schedule calibration inspection of a few equipments in such a way that system automatically create inspection lot & calibration order daily.
Whether user enter calibration result or not, inspection lots in future should be created automaticallly.
I created a single cycle plan using IP41 and start the schedule using IP10, the system created first inspection lot automaticaly but always require me go to to scheduling and save the plan again if I want to create next inspection lots. How can I configure/set the system in such a way that it creates inspection lots/calibration order automaticaly
Plz also tell after taking usage decision of inspection lot whether I need to do some act on calibration order such as technical completion or business completion.
Thanks in advance
Edited by: Chris SAP on Jul 5, 2010 9:56 AM

HI Chris,
During calibration order creation only inspection lots are generated.
Manual order creation
Run Tcode IP30 deadline monitoring to create order if it is due date the order will be generated with inspection lot.
Automatic order creation
Create a batch program to run IP30 daily giving inputs needed so that the order will be generated daily.
Usage decision is completion of inspection lot
Technical completion and business completion is for order completion. Technical completion is needed to schedule the job correctly.
Regards,
Alagesan M

Problems with the MS Exchange connection

Hello SDN members,
I have a problem with the connection between our EP 6 SR1 and our Exchange Server 2003.
Sometimes the connection works, I get the calendar data from the Exchange Server. But mostly I get the error message:
An exception occurred while reading or writing from/to the IIS server
and the error message in the log file on the IIS is:
...../Calendar.asp |87|800a01a8|Object_required .....
If I test the connection with the SAP test program (sapexchangetest), I get no error message.
What can be the problem?
regards
Jochen

Hi,
Unfortunately looking in on this with the limited information I can only venture a few guesses as to where your problem may reside - inspecting yoru NWA logs and performing a trace should provide you with more detail though.
Here is where I would look:
1.) Check the portal proxy config. It may well be that you have also cache enabled access to your exchange environment and any dynamic changes are causing your problem.
2.) Your IIS settings for the calander app need to be reviewed. You may need to re-register the dll and refresh the app or restart IIS. This is typical of dynamic changes in you IIS space. You may need to establish change windows to prevent issues from occurrng.
3.) Your security configuration on IIS need to be reviewed. If the aplication session lifetime is different to that of your portal session lifetime and you are invalidated by IIS you will experience issues.
Hope this helps.
Doug.
Check the IIS logs or NWA logs for additional info to isolate the root cause.

Problems with the/while opening the THX Setup Cons

hi everybody,
hopefully i'm not asking an already often answered question, but since i didn't find a solution for my problem on the initial forum search i'll try my luck with a new thread.
my first (little) problem is that whenever i open the thx setup console all volumes are set to the maximum. not that big of a deal, but still annoying. is there something i can do against this?
the second (not that big either) problem is, that the calibration settings, to be exactly the db-settings, in the thx console aren't properly saved. sometimes (i didn't yet find out after doing what or when or why) they are just changed, and i have to set them for my setup again. any ideas?
thx for your help in advance,
-vio

I had the same problem. Sometimes the settings just seemed to change, not sure why. I don't know of a fix and there is no save button.
I just finished uninstalling everything Creative and then reinstalled the THX Console off the original disc only, then the new Audio Console, then the new Beta Drivers. Everything is working fine for now. There is also an update for the THX Console, but I haven't installed it yet.
Good luck, hope this hel
ps.
Jason

Y 70-70 screen : problems with the black and white colors

Hi all, I just bought a Lenovo Y70-70 and already encountered several problems with the screen :- I had to change the notebook twice because of clearer zones on the black and because of dead pixels- The model I have now still presents irregularities in the black : if the screen is black, I can still see a few clearer zones on it, especially (but not exclusively) on the edges- concerning the white, I am a bit disappointed too : this color present zones that are sometimes ok, sometimes more yellow. Even if it is subtle, I nevertheless particularily see this effect when reading or typing, due to an optical effect that amplifies the phenomenom when text is displayed which tires my eyes. I also see it on colors like beige or grey. As I use this computer to play but also to work, it is uncomfortable. What I would like to know is if these problems are inherent to the screen, or if it is a defect. What should I do ? Did other people encounter the same problems ? I didn't find any setting to improve it. I found that these problems may be link to these, reported on the Y50-70 :- https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Yellow-Dark-Yellow-Screen-Calibration/td-p/1868613- http://www.amazon.com/gp/customer-reviews/RCQNONXIKJJ5D/ref=cm_cr_pr_viewpnt?ie=UTF8&ASIN=B00MCJQ6MI#RCQNONXIKJJ5D Othewise this notebook is OK, playing with it is a real pleasure. Thank you for your answer,S.

Installation of Mavericks is the culprit here. Lightroom versions 4.4 and earlier are not fully compatible with OS 10.9.x. There will be no more updates to Lightroom version 4.x so the only fix is to upgrade Lightroom to 5.0 or later or reinstall an older OS on Mac.

Y70-70 screen : problems with the black and white colors

Hi all, I just bought a Lenovo Y70-70 Touch and already encountered several problems with the screen :- I had to change the notebook twice because of clearer zones on the black and because of dead pixels- The model I have now still presents irregularities in the black : if the screen is black, I can still see a few clearer zones on it, especially (but not exclusively) on the edges- concerning the white, I am a bit disappointed too : this color present zones that are sometimes ok, sometimes more yellow. Even if it is subtle, I nevertheless particularily see this effect when reading or typing, due to an optical effect that amplifies the phenomenom when text is displayed which tires my eyes. I also see it on colors like beige or grey. As I use this computer to play but also to work, it is uncomfortable. What I would like to know is if these problems are inherent to the screen, or if it is a defect. What should I do ? Did other people encounter the same problems ? I didn't find any setting to improve it. I found that these problems may be linked to these, reported on the Y50-70, supposing the screens of both models are the same (which I don't know) :- https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Yellow-Dark-Yellow-Screen-Calibration/td-p/1868613- http://www.amazon.com/gp/customer-reviews/RCQNONXIKJJ5D/ref=cm_cr_pr_viewpnt?ie=UTF8&ASIN=B00MCJQ6MI#RCQNONXIKJJ5D Othewise this notebook is OK, playing with it is a real pleasure. Thank you for your answer,S.

There can be several things that could effect your issue. If you are using a color calibration device, it may change your white balance. Check and verify that you really are using pure white when filling, a value of 255, 255, 255 thats red, green, and blue. Check and see what color mode you are in, are you in 8 bit, 16 or 32 bit. Are you in RGB, CMYK, or other color mode.
I am sure there are a few other things, that I haven't thought of at the moment that can effect your issue.
The next question is what do you mean by black and white? or should I say how did you make it that way. Was it already a black and white (grayscale)? or did you convert it in photoshop and if so how. The reason I ask is there are more than one way to convert a color image to black and white and how you do it will effect the final outcome.

Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Problem in the calibration inspection

Similar Messages

Maybe you are looking for