Problem in uploading the rpt file in BO server
We have the enterprise edition of Business Objects server, which is available in the Solaris 10 machine. We try to upload the rpt file using the Central Management Console Log in, it shows in progress up to 20 min, after that we got the connection time out error. The same report is uploaded easily in the Business Objects server, which is available in windows machine. Solaris environment only we got this error.
Any bodies help me why BO, which is available in Solaris server, is not supporting to upload the rpt file. (If any installation problem, or need to configure some parameters).
RPT file upload only have this problem, other type of files we can easily uploaded.
Thanks in advance.
Hi,
That's a really old post up there, and the forums have since been redesigned.
The forum finder is over here: http://scn.sap.com/docs/DOC-18971
A good collection of BusinessObjects related links can be found here: http://scn.sap.com/docs/DOC-30682
This forum space http://scn.sap.com/community/businessobjects-bi-legacy-products is the most appropriate one if your product question is similar to that above.
Regards ,
H
Similar Messages
-
Upload the MVC File in window server 2008
i want to upload the mvc file in server 2008
installed iis7 in window server 2008. please forward the Pre-Requirements for upload the mvc file and how to upload the mvc file.
i want to host mvc file in window server 2008. please help me.
Thank youOn Tue, 10 Feb 2015 18:03:54 +0000, madudhula mahesh wrote:
i want to upload the mvc file in server 2008
installed iis7 in window server 2008. please forward the Pre-Requirements for upload the mvc file and how to upload the mvc file.
i want to host mvc file in window server 2008. please help me.
This forum, as the name should indicate, is only for Windows Server 10
issues. Since your question appears to be about IIS repost to:
http://forums.iis.net
Paul Adare - FIM CM MVP
Q. how many hackers does it take to screw in a light bulb?
A. Huh?...What? Oh, it's dark in here? -
Problem in accessing the media files from another server
Currently I am working in a project with streaming video on demand and using FMS 4.5.
Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
Please let me know:
If we need to configure any other parameter to stream videos from another server.
VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
Please let me know can we stream using http also as we need this to run f4m manifest file.
http://121.123.35.34:8134/vod/hr/sample.mp4.
http://121.123.35.34:8134/vod/hr/sample.f4m
Thanks,
AnjaliHi Shiven,
I followed the steps suggested by you:
1) Changed the stream:
<Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
http:// 121.123.35.34:8134/vod/test.mp4 or
http:// 121.123.35.34:8134/hds-vod/test.mp4
But not able to load the video.
Please suggest?
Thanks & Regards,
Anjali Rawat -
Placing the text file in application server
Hi all,
I am uploading the text file into application server.
the line length is 1028 characters.But in application server i am not able to see whole line.it is showing only some data and reamaining data is not coming.
Please let em know how can we increase the line length in application server.
Regards,
ShobanSE38 is the ABAP Editor transaction.
Use function module GUI_UPLOAD to create an upload the data.
*Use function module GUI_UPLOAD to create an upload the data.
Example Code >>>
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
*DATA: ld_file LIKE rlgrap-filename.
DATA: gd_file type string.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 LIKE pa0002-vorna,
name2 LIKE pa0002-name2,
age TYPE i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Internal table to upload data into
DATA: BEGIN OF it_datatab OCCURS 0,
row(500) TYPE c,
END OF it_datatab.
*Text version of data table
TYPES: BEGIN OF t_uploadtxt,
name1(10) TYPE c,
name2(15) TYPE c,
age(5) TYPE c,
END OF t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) TYPE c.
CONSTANTS: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_infile.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = p_infile
mask = ',*.txt.'
mode = 'O'
title = 'Upload File'(078)
IMPORTING
filename = p_infile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*START-OF-SELECTION
START-OF-SELECTION.
gd_file = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gd_file
has_field_separator = 'X' "file is TAB delimited
TABLES
data_tab = it_record
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc NE 0.
write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
skip.
endif.
Alternative method, where by you split fields at each TAB after you
have returned the data. No point unless you dont have access to
GUI_UPLOAD but just included for information
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gd_file
filetype = 'ASC'
TABLES
data_tab = it_datatab "ITBL_IN_RECORD[]
EXCEPTIONS
file_open_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
ELSE.
LOOP AT it_datatab.
CLEAR: wa_string, wa_uploadtxt.
wa_string = it_datatab.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_record.
APPEND wa_record TO it_record.
ENDLOOP.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
LOOP AT it_record INTO wa_record.
WRITE:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
ENDLOOP.
Edited by: Nikhil Jathar on Jan 9, 2008 7:38 AM -
How to avoid the split problem when uploading the data from csv file
Dear Friends,
I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
SPLIT wa_raw_csv AT ',' INTO
wa_empdata_csv-status
wa_empdata_csv-userid
wa_empdata_csv-username
wa_empdata_csv-Title
wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR" wil not be split into two words.
Thanks & Records
MadhuriHi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin -
Error message: Cannot load the rpt file
Can anyone please help.
I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
1: Cannot load the rpt file
2: Object reference not set to an instance of an object
3: Invalid report file path
I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
Does anyone have any ideas to solving this?
Thanks
TonyHi Tony,
On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found. -
Error while uploading the PAR file of Production to UAT-
Hi Experts,
Could you please help me out in resolving the error which i'm facing while uploading the PAR file.
1. I have downloaded the par file from the production, imported to my NWDS.
2. Made changes to my HeadiView.jsp
3. I want to test my implementation in UAT.So i have uploaded the PAR to UAT system.
4. Below is the error i'm getting from the Log trace.
#1.#D27E2000F002008200000020000BD0FE0004436CD4EBF6C2#1200034614604#com.sap.porta
l.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#BVISHALA#17971##adcapsap18.
uk_QP0_16441150#BVISHALA#5d8f9460c01111dcafa2d27e2000f002#Thread[PRT-Async 2,5,P
RT-Async]##0#0#Error##Java###06:56_11/01/08_16441150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in in
it method
Component : com.tw.navigation.Masthead.HeaderiView
at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refr
esh(PortalComponentContextItem.java:271)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getC
ontext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getCompone
ntContext(PortalComponentRequest.java:387)
at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.j
ava:443)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.j
ava:233)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:6
36)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:816
at com.sapportals.portal.prt.component.CachablePortalComponent.handleEve
nt(CachablePortalComponent.java:703)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalL
auncher.java:318)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(P
ortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(
ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatc
her.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:242
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.ja
va:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.se
rvice(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.forward(RequestDispatcherImpl.java:377)
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServle
t(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReq
uest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebCo
ntainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(Requ
estAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:9
5)
at com.sap.engine.services.httpserver.server.Processor.request(Processor
.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
sionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
nner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
7)
at java.security.AccessController.doPrivileged(AccessController.java:215
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
va:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
70)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationExc
eption: Could not instantiate implementation class com.btexx.pct.easyWCM.navigat
ion.masthead.HeaderiView of Portal Component com.tw.navigation.Masthead.HeaderiV
iew because: Could not find implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:242)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getCo
mponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponen
tInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getCompone
nt(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:242)
... 44 more
Caused by: java.lang.ClassNotFoundException: com.btexx.pct.easyWCM.navigation.ma
sthead.HeaderiView
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:152)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:228)
... 48 more
Kindly help me to resolve this issue.
Many Thanks,
B.Vishali.Hi,
The problem might be caused by the version inconsistency of your J2EE and Portal Platform.
Please check the version of your J2EE and Portal.
Best Regards,
Assaf -
Can I edit the rpt file & change the datasource before loading the report?
We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
ThanksHI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
// Check the kind of the ReportObject, if it is a subreport
// proceed. If not skip.
if(crReportObject.Kind == ReportObjectKind.SubreportObject)
// Get the SubReport in the form of a ReportDocument
string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
// Use a loop to go through all the tables in the main report
foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad -
How to upload the pdf file to the next view?....urgent
Hi Experts,
I need to upload the pdf file( a interactive form ) using the fileupload element in the A_view and the pdf file can be displayed in the b_view.
But I don't know how to complete the function?
Action:
0. Create a adobe form (c_form)in the R/3 using sfp with a inputfield.
1. Create a adobe interactive form (A_interactive_form)in the view(display_view) of the WDA for abap.
2. Create a context attribute(upload) in the display_view.
3. Bind the c_form to the A_interactive_form, so that the data can be transfered to the c_form.
4. Bind the "pdfSourth" property to context attribute "upload" in the A_interactive_form.
4. Type code in the WDA for abap for setting data("old") to the context.
5. Active the WDA and run the WDA.
6. In the IE, the interactive form is displayed with the value "old" in the field. Save the pdf form as "test.pdf" and close the IE.
7. Open the test.pdf, and type the inputfield "new" in the form, and save the test.pdf.
8. Create a context node(Pdfsourth) in the component controller, and create a attribute("upload") that type is xstring in the Pdfsourth.
9. Create a view(C_view), mapping the context node(Pdfsourth) in the component controller.
10. Create a fileupload element in the C_view, and the "data" property is binded the "upload" attribute in the context node(Pdfsourth).
11. Create a button(Display_form) and create the action with the outplug for upload the pdf file(test.pdf).
12. Change the window and set the C_view as default view, and set the Navigation link from the C_view to B_view.
13. Type code in the wddoinit method in the display_view for transfering the test.pdf file.
method WDDOINIT .
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
DATA upload TYPE xstring.
lo_componentcontroller = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->getupload(
IMPORTING
upload = upload " xstring
DATA lo_nd_pdfsourch TYPE REF TO if_wd_context_node.
DATA lo_el_pdfsourch TYPE REF TO if_wd_context_element.
DATA ls_pdfsourch TYPE wd_this->element_pdfsourch.
navigate from <CONTEXT> to <PDFSOURCH> via lead selection
lo_nd_pdfsourch = wd_context->get_child_node( name = wd_this->wdctx_pdfsourch ).
get element via lead selection
lo_el_pdfsourch = lo_nd_pdfsourch->get_element( ).
get single attribute
lo_el_pdfsourch->set_attribute(
EXPORTING
name = `UPLOAD`
value = upload ).
endmethod.
15. Active the WDA and run the WDA.
In the fileupload of the C_view, I select the test.pdf from my local machine. and click the button(Display_form), the display_view is displayed with the A_interactive_form.
But in the A_interactive_form, the value "old" is in the field in the form rather than "new".
I hope to display the test.pdf in the A_interactive_form. I don't know how to change my code or configuration?
Do you give some example or some hint for this problem ?
Thanks & Regards,
TaoNow, The problem has been solved.Thanks a lot.
-
Admin tool upload the repositroy file by odbc
is there anyone using admin tool to upload the repository file by odbc to BI server, I had problem working on odbc configuration, that always showing " can not connect to BI server" message -thanks
Do you want to use DSN 'AnalyticsWeb'? in this case you have to configure that target server port from nqsconfig file value default-> RPC_SERVICE_OR_PORT = 9703
If this is not relevent to you,can you share more details
If it is helpful, please mark as correct or helpful -
How to upload the tif file and Display into Iframe
Hi all,
My requirement is to upload 'n' number of tif files and display the file name in dropdown.
If i select the file name, it should display the file in Iframe.
My problem is i am not able to upload the tif file.
try{
byte []by=new byte[wdContext.currentContextElement().getPhotoResource().read(true).available()];
wdContext.currentContextElement().getPhotoResource().read(true).read(by);
String ext=wdContext.currentContextElement().getPhotoResource().getResourceType().getFileExtension();
WDWebResourceType res=wdContext.currentContextElement().getPhotoResource().getResourceType();
IWDResource resource=null;
resource=WDResourceFactory.createResource(by,"sample",WDWebResourceType.getWebResourceTypeForFileExtension(ext));
wdContext.currentContextElement().setPhoto(resource.toString());
catch(Exception e){
In the above code Photo is Iframe Context variable.
If i upload tif file means it directly giving Save and Open options is giving.
Please how to slove this probelm...........................
Thanks,
SuniHi Satya,
In HTML a TIF file can be displayed as"
<html>
<body>
<object height="100%" width="100%"
type="image/tiff" data="PO.tif">
</object>
</body>
</html>
Hope it helps.
Regards,
Alka -
Url idle with ccm 5.1: where upload the image file?
Hi,
I'm trying to work the url idle feature in ccm 5.1.
The phone gets the message error http (404).
I have the default configuration on the enterprise parameters of the callmanager and I have upload the xml image file in the tftp directory and in a ccmcip directory, but it doesn't work.
Where must I upload the image file or why it dosn't work?I am having the same problem...I don't suppose you would mind being a bit more specific!!!????
-
Issue while uploading the PAR file thru system admin- AdministrationConsole
Hi All,
I have downloaded the PAR file "com.sap.portal.navigation.lightdetailednavigationtree.par.bak" from system admin->support->Portal Runtime ->browse deployment->Web-Inf->deployment->PCD.
after downloaded to the desktop for manual change in one of the JSP file rather than importing into NWDS. I have removed the bak from the file and added the .Zip to the file and i extracted the file.
here inside i got the three folders i.e WEB-INF,PORTAL-INF and file_list. now i went to jsp file called "LightDetailedNavigationTree.JSP" , changed one small property value in the code from false to true. after that i again zip the folders strcuture make the file name as original in the form of .PAR file. now i am trying to upload it in the portal thru system admin->portal runtime->administration console, but i am getting the deployment error as mentioned in the below.
even though with error, the wrong version of the par file with extension .err was saved in the PCD folder strcture, and original file also still exists. now i wanted to remove the wrong version of the file from PCD, what is the procedure to delete the wrong version, here in administration console i found one button clean , but i could not able to locate the wrong file version , only original right version showing up in the clean dropdown??
Can u tell me what is the procedure to edit the PAR file manually after downloaded to the desktop, rather than going edit thru NWDS??
if we need to upload the PAR file after changes, do we need to delete the original PAR file before we upload the new version of the same PAR or it will be automatically overwrite the original file with the same name??
Still i am getting confusion, please let me know how to edit the PAR file manally and how to upload the PAR file with out any isse while uploading it in the portal thru system admin->administration console??
Any pointers in this regard would be the great help to me??
Error as i got while uploading the par file after the changes manually. (com.sap.portal.navigation.lightdetailednavigationtree.par)
2011-01-24_07-40-18
Application upload failed: com.sap.portal.navigation.lightdetailednavigationtree.par
java.util.zip.ZipException: Error opening zip file /usr/sap/BIS/DVEBMGS13/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.sap.portal.navigation.lightdetailednavigationtree.par
* at java.util.zip.ZipFile.open(Native Method)*
* at java.util.zip.ZipFile.<init>(ZipFile.java:140)*
* at java.util.zip.ZipFile.<init>(ZipFile.java:155)*
* at com.sapportals.portal.prt.deployment.ArchiveIterator.iterate(ArchiveIterator.java:39)*
* at com.sapportals.portal.prt.deployment.UploadProcess.upload(UploadProcess.java:60)*
* at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:835)*
* at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)*
* at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)*
* at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)*
* at java.lang.reflect.Method.invoke(Method.java:391)*
* at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:706)*
* at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)*
* at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:249)*
* at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)*
* at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)*
* at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)*
* at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)*
* at java.security.AccessController.doPrivileged(AccessController.java:246)*
* at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)*
* at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
* at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)*
* at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
* at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)*
* at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)*
* at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)*
* at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)*
* at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
* at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
* at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
* at java.security.AccessController.doPrivileged(AccessController.java:219)*
* at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)*
* at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)*
Can you please what are the steps if any specific while editing the PAR file manually and uploading it with out any issues??
Thanks in advance.
Regards,
PortalUser
Edited by: PortalUser100 on Jan 24, 2011 6:01 PM
Edited by: PortalUser100 on Jan 24, 2011 6:04 PM
Edited by: PortalUser100 on Jan 24, 2011 6:05 PMHi Shusil,
Thanks for your reply.
I have one more dought here.
the PAR file of lightdetailnavigation has been modified thru NWDS and deployed the PAR file by adding the required JARS.
Now my question is, the application server which i am used as local portal server installed in my desktop.
now this depoyed latest par file i have picked it from the workspace in the local desktop, and i am planning to upload the same PAR file in of the sandbox portal system of client , will it update successfully in the new portal apart from the deployed portal??
i am here used the path system admin->support->portal runtime -> administrate console ( this in the sand box system to upload the par file which was deployed in the local portal server in my desktop.
Thanks,
Portal user -
How can I show the last amend date of the .rpt file on my report?
I want to show the last amendment date of the .rpt file on my report.
Modification date and time refer to the actual report rather than the .rpt file.
Does anyone have any suggestions? I am using version 11.2.
Thanks,
Anne-Marieannemarier,
Have you tried the "Modification Date" or "Modification Time" fields located under the Special Fields section of the Field Explorer?
I've never used them, but they seem like good candidates.
Jason -
Error message while uploading the flat file
Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshayhi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm
Maybe you are looking for
-
Hi all !!! I'm using the ALV Grid control with checkboxes and I want to control if the actual user have the appropriate authorization to check/uncheck them. In the AUTHORITY-CHECK call, I want to make the authorization test on the "DEPARTMENT" of th
-
I have downloaded the new Mountain Lion but I don't get the icon to mirror my iMac on my Appe TV Can anyone help as they are both on the same network.
-
Use of RFC destination "DEST" of type SNA/CPI-C connections
Hi , Please tell me the use of RFC destination "DEST" of type SNA/CPI-C connections in PI system . Connection test for this RFC is failing with message "Error when opening RFC connection" . whether it is normal ? Regards , Hanumant
-
Burn a windows dvd to run on my mac
I hope someone can help me on this. I was given a promotional tourist DVD that looks very interesting. When I put it into my MacBook Pro it shows up on the desktop but I can't run it because it seems to be for Windows only. These are the files on the
-
Return set of data from function
Dear All How can i return set of data from from funtion into database? Thanks