Problem in XI Receiver

Hi Guys,
Im using  SAP XI version 7...im just a beginner using XI..
In runtime workbench...the comm channel for sender and receiver is correctly configured and started but in status its has an error.
This is the actual path of my comm channel.
*file sender path
f:\XI\Sender - <where f: is the local drive in xi server>
*file archive path
f:\XI\Sender\archive
*file receiver path
f:\XI\Receiver
if you double check it under Start-> Run
xidev\f\XI\Sender <hostname><local drive><shared folder>
Is there an issue regarding shared folder in XI Server? do i need to map drive with $ sign of the folder like this?
xidev\f$\xi\sender   
Please help. How can I solve this.Is there a problem with my mapping?
Thanks in advance
aVaDuDz

Hii
You can either specify the entire name or a name relative to the working directory of the Adapter Engine. On all platforms (including Windows), use a forward slash (/) to separate directory names in accordance with the Java specification.
See Defining File Access Parameters in this link :
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/658abd344a4de0e10000000a1553f7/frameset.htm

Similar Messages

  • Hi, I have a problem that I receive lots of Spam messages from my office, which are of no use for me. I am not in a position to bar the message from the service provider due to official constrains. I want to know if I can bar the message on Iphone

    Hi, I have a problem that I receive lots of Spam messages from my office, I cannot bar the spam text from service provider due to official constrain.
    I just want to know if there is any mechanisme where i can bar the message from a specific sender. I know there are some apps like Iblacklist available but we do not find it in any Iphone which is not jailbreak. I was just thinking of developing some code for it.

    No. You can't. Filtering would have to be done at the server level.

  • Integrated Configuration- Problem occurred in receiver agreement for sender

    Hi ,  I am using AAE in PI 7.1  and it is proxy to file scenrios.
    When Ia m doing testing  in Integration Directory in test configuration its giving me this error .
    Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
    ( here it should take interface  Qualifications_Async_In, but logs says it is pointing to outbound interface)
    here  when I am going in to trace logs  then it seems  that are not able to understand  the   receiver interface . rather then it is taking sender inface in logs..
    In trace logs . I am getting
    Receiver Determination
    <Not found>
    <Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
    <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
    <Trace level="1" type="T"> Cache Content is up to date </Trace>
    <Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
    <Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
    <Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
    <Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
    <Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
    <Trace level="3" type="T">...create rule engine </Trace>
    <Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
    <Trace level="2" type="T">Number of Receivers:1 </Trace>
    <Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
    Interface Determination
    <Not found>
    <Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
    <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
    <Trace level="1" type="T"> Cache Content is up to date </Trace>
    <Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
    <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
    <Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
    <Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
    <Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
    Operation Mapping
    <Not found>
    <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
    <Trace level="2" type="T">......attachment XI_Context not found </Trace>
    <Trace level="3" type="T">Mapping already defined in interface determination </Trace>
    <Trace level="1" type="T">No mapping configured </Trace>
    <Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
    I  have developed the other integrated configuration scenario and this is working fine . 
    please let me know how can I troubleshoot it

    I am using sender as Soap and receiver as File adapter. 
    here  the problem is that  while going for interface deteremination and receiver agreement  it is calling to  Outbound interface .
    It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
    I put the name of inbound interface  in configuration but while executing its calling outbound interface.

  • Problems in IDOC receiver communication channel

    Hi,
    I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
    Please assist.
    Rgds
    Kishore

    OK in that case, we are getting the following error in the Message monitoring:
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
      <SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
      <SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
      <SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
    Please check and assist.
    Rgds
    Kishore

  • Problem in the receiver JDBC channel

    hi,
    I am facing some problem with the receiver JDBC channel which is trying to insert some data in ORACLE DB.  My sample input XML file is,
    <root>
    <statement>
    <table>EBILL_CUST_STATE_AGE_HDR2</table>
    <CUST_CODE>BA001</CUST_CODE>
    <CUST_ADDR>Rental Customer Name 1+Name 2street01+TEL: 0331694100
                           FAX:0331694103</CUST_ADDR>
    <CRD_LMT>1000000.00</CRD_LMT>
    <BG_AMT>1000000.00</BG_AMT>
    </statement>
    </root>
    Error stack is,
    Exception caught when executing statement for table/stored proc. 'EBILL_CUST_STATE_AGE_HDR2' (structure 'Statement_CUST_STATE_AGE_HDR2'):
    java.sql.SQLException: ORA-00917: missing comma
    Please help me in solving the issue ASAP.
    Thanks,
    Soorya

    Hi,
    It works like this
    <ROOT>
    <STATEMENT>
    <TABLENAME ACTION="INSERT">
    <TABLE>EBILL_CUST_STATE_AGE_HDR2</TABLE>
    <ACCESS>
    <CUST_CODE>BA001</CUST_CODE>
    <CUST_ADDR>Rental Customer Name 1+Name 2street01+TEL: 0331694100
    FAX:0331694103</CUST_ADDR>
    <CRD_LMT>1000000.00</CRD_LMT>
    <BG_AMT>1000000.00</BG_AMT>
    </ACCESS>
    </TABLENAME>
    </STATEMENT>
    </ROOT>
    Please refer the link.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    Abid Mazhar

  • SIGNING problem in soap receiver adapter

    Dear Friends,
    I am sending the file to soap adapter , it reaching to reciever system but I SIGNING is not happening.
    sender side file adapter
    receiver side soap adapter
    sender side ok , reciever side also ok but only the problem is SIGNING.
    receiver side any settings are required.
    Please suggest me how to resolve this issue.
    Regards,
    Shalini Shah

    Hi,
    If you want to sign the message then enable webservice security in receiver communication channel and specify the certficate for signing in the receiver agreement. Certificates need to be created in Visual Admin and corresponding public key should be provided to the partner for validating the signature.
    You need to create a connection type G in SM59 which is required for connecting to J2EE from integration server and you need to specify  this connection in the port which need to be created in tcode lpconfig.
    Regards,
    Prakash

  • Problem normalizing the receiver- PARTY

    Dear all,
    Hi, experts!
    We have a FILE to FILE scenario which return this error in XI monitor:
    "RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
      <SAP:P1>Problem normalizing the receiver: Normalization: Alternative party ID 'TPV_0021' does not exist (agency '' and scheme '&PARTY_SCHEME&')
    We do not use DUNS things or sth. similar - just the XI party...
    What's the problem?
    Thanks

    Hi,
    It works like this
    <ROOT>
    <STATEMENT>
    <TABLENAME ACTION="INSERT">
    <TABLE>EBILL_CUST_STATE_AGE_HDR2</TABLE>
    <ACCESS>
    <CUST_CODE>BA001</CUST_CODE>
    <CUST_ADDR>Rental Customer Name 1+Name 2street01+TEL: 0331694100
    FAX:0331694103</CUST_ADDR>
    <CRD_LMT>1000000.00</CRD_LMT>
    <BG_AMT>1000000.00</BG_AMT>
    </ACCESS>
    </TABLENAME>
    </STATEMENT>
    </ROOT>
    Please refer the link.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    Abid Mazhar

  • I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

    I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

    I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
    Now all is working.
    Thanks,
    B.

  • HT201320 when i send an email using my hotmail address through outlook my contacts do not receive the mail. when i send the same mail through my iPad or iPhone no problem my contacts receive the mail. this only problem happens when i send mail with my mac

    I have a hotmail email address. I compose my mail useing MS outlook. when i send the mail to my contacts useing my macbook air,my contacts tell me there have not received the mail.
    when i send the same message with my ipad or iphone no problem my contacts receive the mail.
    what is the problem?

    Blair84 wrote:
    Double check your contacts email, and if its incorrect, go to their contact and change it and save it or you can delete the email you put in, and manually type it in.
    Hope this helps.
    How would that help the original poster?

  • Problems with sending/receiving picture messages

    Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S?  I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

    Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

  • I have 2 iphones registered under the same appleID.  Every text message that is sent to my phone, the other phone receives as well.  If I turn "imessage" off on the other phone, will this solve the problem from her receiving text messages meant for me?

    I have 2 Iphones, registered under the same AppleID. Mine, and my mom's.  I recently (today) did the software udate for her phone, and ever since-she receives every message i send to my girlfriend, and every response that my girlfriend sends to me.  I read up on Imessage, and checked the settings on both phones.  On each phone "imessage"was turned on, so i turned Imessage off.  Will this solve the problem of my mom receiving every message that  i send and receive? Also, if i turn Imessage back on, on my phone-will i still have privacy to text?

    Why not create a second Apple ID?  Wouldn't that solve the problem much more straightforwardly?
    Here's a helpful website: http://www.apple.com/support/appleid/

  • Performance problem in IDoc receive (DELFOR01)

    Hi,
    I have serious problems in receive of Idoc Delfor01 (IDOC_INPUT_DELINS). We receive more than 3000 Idoc daily of this type and the process of then during all day....
    One of more common error is foreing_lock of VBAK table. This error occurs in the Form beleg_sperren (line 459 from IDOC_INPUT_DELINS) when the process try enqueue one vbeln entrie from VBAK (o think by the high number of Idoc received) and, the process waits a large time trying enqueue the table entry until the error...
    When I analyze the IDOC_INPUT_DELINS i see a batch-input for the VA32 transaction (at line 528). I think if call a Bapi instead a Call Transaction have more performance... it´s right?
    I would appreciate help with possible solutions to this problem.. Have a better mode to process large amount of these IDoc type? Or have other FM than IDOC_INPUT_DELINS with better performance???
    Regards,

    Not need immediatly, but a quickly possible... In WE20 if I choose the background program the process will executed* fastly than I choose Imediattly start?
    *executed via schedule job of program RBDAPP01.
    I stil reading the notes above..

  • FTP/SSL Connection Problem for FTP Receiver Adapter

    Hello All,
    We are trying to establish an FTPS/SSL connection with one of our customers from our XI(Unix) system, and are receive following error:
    <b>iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier</b>
    Communication Channel Parameters:
    Connection Security: FTP (FTP Using SSL/TLS) for Control Connection or FTP (FTP Using SSL/TLS) for Control Connection and Data Connection
    Command Order: AUTH TLS, USER, PASS, PBSZ, PROT
    Checkbox - Use X.509 Certificate.... checked (Certificate was provided by third party (customer issued) and uploaded to service_ssl certificate store on J2EE server)
    Data Connection: Passive
    Port: 10021
    Keystore: service_ssl
    X.509 Certificate & Private Key: ssl-credentials
    Note: Initial handshaking occurs but connection is being dropped by the third party FTP Server when SSL certificate credentials are being validated. We also tried connecting to the third party FTPS server using standard FTPS client(FileZilla software), this connection gets established successfully with no certificate issues which means certificate and third party FTP Server is functioning correctly.
    We therefore are thinking that the problem lies with our XI system being unable to load the certificate information correctly at the point when FTPS session is being established.
    Your help and suggestions will be greatly appreciated.
    Thanks and Best Regards
    Prashant Rajani

    Hello All,
    Further in order to test connection set up and communication channel configuration we tried simulating the FTP connection locally by configuring FTP Server using FileZilla at a local machine and accessed it from Client's XI Server.
    This set up simulates the problem we encounter with our customer's FTP Server.
    If connection security parameter in communication channel for Sender FTP Adapter is set to <b>"FTPs( FTP Using SSL/TLS) with Control Connection" only</b>, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to <b>"FTPs( FTP Using SSL/TLS) with Control and Data Connection"</b>, we receive error "Certificate rejected by Chain Verifier". The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
    This is what the FTP (FileZilla) sees when the XI system attempts to set-up a fully encrypted data  (FTPS) connection i.e., connection security parameter value as<b>"FTPs( FTP Using SSL/TLS) with Control and Data Connection"</b> :-
    - (not logged in) (10.18.106.34)> Connected, sending welcome message...
    - (not logged in) (10.18.106.34)> 220-FileZilla Server version 0.9.18 beta
    - (not logged in) (10.18.106.34)> 220-written by Tim Kosse ([email protected])
    - (not logged in) (10.18.106.34)> 220 Please visit http://sourceforge.net/projects/filezilla/
    - (not logged in) (10.18.106.34)> AUTH TLS
    - (not logged in) (10.18.106.34)> 234 Using authentication type TLS
    - (not logged in) (10.18.106.34)> SSL connection established
    - (not logged in) (10.18.106.34)> USER test
    - (not logged in) (10.18.106.34)> 331 Password required for test
    - (not logged in) (10.18.106.34)> PASS ***********
    - test (10.18.106.34)> 230 Logged on
    - test (10.18.106.34)> PBSZ 0
    - test (10.18.106.34)> 200 PBSZ=0
    - test (10.18.106.34)> PROT P
    - test (10.18.106.34)> 200 Protection level set to P
    - test (10.18.106.34)> SYST
    - test (10.18.106.34)> 215 UNIX emulated by FileZilla
    - test (10.18.106.34)> PWD
    - test (10.18.106.34)> 257 "/" is current directory.
    - test (10.18.106.34)> CWD /payment/
    - test (10.18.106.34)> <b>250 CWD successful. "/payment" is current directory.</b>- test (10.18.106.34)> TYPE I
    - test (10.18.106.34)> 200 Type set to I
    - test (10.18.106.34)> PASV
    - test (10.18.106.34)> <b>227 Entering Passive Mode (10,27,7,103,15,63)</b>- test (10.18.106.34)> STOR BHPDSB20060911-153840-834.txt
    - test (10.18.106.34)> <b>150 Connection accepted</b>
    - test (10.18.106.34)> <b>Data connection SSL warning: SSL3 alert read: fatal: bad certificate</b>
    - test (10.18.106.34)> <b>Data connection SSL warning: SSL_accept: failed in SSLv3 read client certificate A</b>- test (10.18.106.34)> <b>Data connection SSL warning: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate</b>- test (10.18.106.34)> <b>Data connection SSL warning: error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure</b>- test (10.18.106.34)> <b>426 Connection closed; transfer aborted.</b>- test (10.18.106.34)> QUIT
    - test (10.18.106.34)> 221 Goodbye
    - test (10.18.106.34)> SSL connection established
    Please suggest your valuable inputs if we are missing out something. Any helpful inputs in this regard is highly appreciated.
    Thanks and Best Regards
    Prashant

  • Problem with CC Receiver with AS2 Adapter Seeburger

    Hi,
    I try to test the AS2 Adapter with Receiver channel y one server and Sender channel in second server, but in the Receiver channel, I have the error :
    "MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2."
    I find the error and I found the URL Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!! with the same problem, but I have the same configuration in the Party of the receiver and the Sender, the same AS2ID name, and try with the solution in the forum respect the Party name in the scenario of the Receiver, but don't work.
    My scenario is send an IDOC from R/3 to a partner with the AS2 receiver channel.
    Is my fisrt scenario with AS2 adapter. Somebody help me please with any example or with any idea about the solution to my problem?
    Greetings,
    Hervey

    I have resolved this problem, thanks.

  • Problem with an Receiver Idoc adapter

    Hi.
    We have just went from XI 3.0 to PI.7.10.
    The Receiver idoc adapter is set up in the same way as it was in XI.
    The problem is when two different interfaces runs at the same time I got data into the DC40-record which not belongs too this idoc but from an another interface/idoc.
    The idocs are different messagetypes.
    In this case the field MESCOD which belongs to one of the idocs also appered in the idoc where the field MESCOD not should be used.
    Any idea whats wrong ?
    /Per-Arne

    Thanks.
    Checked sxmb_moni as you said.
    In the OutboundBinding-node I can see the right idocadapter is used
    where 'Apply Control Record Values from Payload' is enabled.
    <SAP:ChannelName>IDOC_INBOUND_U01_110</SAP:ChannelName>
    In the IdocOutbound-node I can see the message code 'EXT' which should'nt be there.
    - <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
      <SAP:MANDT>001</SAP:MANDT>
      <SAP:DOCREL>710</SAP:DOCREL>
      <SAP:DOCNUM>0000000000033474</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>OILLDD01</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>OILLDD</SAP:MESTYP>
      <SAP:MESCOD>EXT</SAP:MESCOD>
    Too be more specific about the interface.:
    I got one file in from a file adapter and out of that file I produce two idocs into R3 whit
    two different idocs-adapters.
    I think you are right about that the configuration may be mixed up.
    Any idea of what I can do?
    It may be an PI 7.10 bug ?
    Shall I delete all config objects and so set config up from scrach again ?
    /Per-Arne

  • Problem with soap receiver adapter

    Hi All
    I have Idoc sender and soap receiver in my scenario.
    I am calling web service deployed on WAS.
    The web service is getting called but the acknowledgement message in xi contains following system error acknowledgement because of which xi changes the status of message to WAIT and starts retrying.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.MessagingException: java.net.SocketTimeoutException: Read timed out: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.SocketTimeoutException: Read timed out</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Please anybody can help to resolve this problem. This scenario has worked without any error previously.
    Thanks in advance
    Beena

    Hi Bhavesh,
    It is an Async call where method does not return anything.
    I added entries in IDX_NOALE but still it is setting the message status to WAIT and does retry.
    Following is the Audit Log in Runtime workbench :
    Audit Log for Message: 22b3052d-c519-034e-85db-e65d541d6414
    Time Stamp Status Description
    2006-12-13 10:25:23 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
    2006-12-13 10:25:23 Error Exception caught by adapter framework: Read timed out
    2006-12-13 10:25:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
    2006-12-13 10:25:24 Success The asynchronous message was successfully scheduled to be delivered at Wed Dec 13 10:30:24 GMT+05:30 2006.
    2006-12-13 10:25:24 Success The message status set to WAIT.
    2006-12-13 10:30:25 Success Retrying to deliver message to the application. Retry: 1
    2006-12-13 10:30:25 Success The message was successfully retrieved from the receive queue.
    2006-12-13 10:30:25 Success The message status set to DLNG.
    2006-12-13 10:30:25 Success Delivering to channel: INSPWCCT_PVtoSAP_Ack
    2006-12-13 10:30:25 Success SOAP: request message entering the adapter
    2006-12-13 10:35:28 Success SOAP: call failed
    2006-12-13 10:35:28 Success SOAP: sending a delivery error ack ...
    2006-12-13 10:35:28 Success SOAP: sent a delivery error ack
    2006-12-13 10:35:28 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
    2006-12-13 10:35:28 Error Exception caught by adapter framework: Read timed out
    2006-12-13 10:35:28 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
    2006-12-13 10:35:28 Success The asynchronous message was successfully scheduled to be delivered at Wed Dec 13 10:40:28 GMT+05:30 2006.
    2006-12-13 10:35:28 Success The message status set to WAIT.
    I have tried this scenario earlier. I am sending the same Idoc from R3 which was processed successfully earlier.
    Thanks
    Beena.

Maybe you are looking for