Problem installing Visual Studio 2012 Professional, "security ID may not be assigned as the owner of this object"
I'm trying to install Visual Studio 2012 Professional edition on my work laptop, Windows 7 Enterprise, Service Pack 1. I have limited admin rights and should be able to install
programs on this laptop but when I try to install VS 2012, I get the following error message:
"This security ID may not be assigned as the owner of this object."
Any idea why this is happening?
Hi,
You must have administrator credentials to install Visual Studio. However, you do not have to have these credentials to use Visual Studio after it is installed.
More information you can refer to:
http://msdn.microsoft.com/en-us/library/e2h7fzkw(v=vs.110).aspx
Please install the Visual Studio 2012 as the administrator.
Best regards,
Ego [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Similar Messages
-
Installing Visual Studio 2012 update 4 on Windows 10 preview
Hi all,
I successfully installed visual studio 2012 on Windows 10 preview but when I try to install update 4 I get an error about compatibility:
I tried downloading the update with "VS2012.4 /Layout"
but I could not find any way to control the compatibility setting...
any advise?
SmadarWhat's the name of the file you're using to install Visual Studio?
It seems there may be a bug in Windows 8.1 (and hence also Windows 10) where re-naming the EXE file fixes the problem. More information is available
here, however the applicable text is below:
"Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime,
you can typically rename the EXE to get it to work correctly.
Examples:
Visual Studio Professional 2012 installer should be renamed to vs_professional.exe
Premium -> vs_premium.exe
Ultimate -> vs_ultimate.exe
Please let me know if this resolves your issue."
Hope that helps! -
Fail in installing Visual Studio 2005 Professional Edition in Windows 7
Hi,
I'm new in here. I've just got my Notebook Installed with WIndows 7 Enterprise 32 bit and I would like to install Visual Studio 2005 professional Edition(I've got the installer CD from the MSDN which is purchased in our Company) in my
notebook. There is an issue which often occured, it says:
A problem has been encountered while loading the setup components. Canceling Setup.
I've look up for the solution try lot of things to resolve the issue but no luck until now.
Any idea or experience to help me?
Thanks in advance for the help.I also add you the log from dd_vserror80.txt :
[09/19/11,17:19:17] MSITOSIT: [2] CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] MSITOSIT: [2] ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] setup.exe: [2] ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:50] setup.exe: [2] CSetupManager::RunLoadSetup() - Failed to Run the Intro
the log from dd_vsinstall80.txt :
[09/19/11,17:19:06] Setup.exe:
[09/19/11,17:19:06] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:06] Setup.exe: =====================================
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:06] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude
[09/19/11,17:19:06] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:06] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to D:\setup
[09/19/11,17:19:06] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:06] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:06] UTILS::RunNGENAction: Started
[09/19/11,17:19:06] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:07] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:07] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:07] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:07] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:07] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:07] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:07] Setup.exe: CSetupManager::CopyTempFiles() - Installing setup files...
[09/19/11,17:19:07] Setup.exe: CSetupManager::InstallSetupFiles() starting
[09/19/11,17:19:07] Setup.exe: GetGlobalCustomProperty({39E467CB-8962-4AD8-99F9-864AFF183FD4})
[09/19/11,17:19:07] vs70uimgr: Entering ShowSmallProgress() method.
[09/19/11,17:19:13] Setup.exe: CSetupManager::CopyTempFiles() - Successfuly copied files to temp; rerunning Setup...
[09/19/11,17:19:14] Setup.exe: CSetupManager::CopyTempFiles() - Finished Rerunning Setup...
[09/19/11,17:19:14] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:14] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
[09/19/11,17:19:14] Setup.exe:
[09/19/11,17:19:14] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:14] Setup.exe: =====================================
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:14] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude /CreatedTemp /NoExclude /InstalledFrom D:\setup
[09/19/11,17:19:14] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:14] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to C:\Users\M162601\AppData\Local\Temp\SIT41797.tmp
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({1B3F6DC3-205F-11D3-A824-00C04FB1799F})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({383F0141-C682-4665-A69B-756E719C968D})
[09/19/11,17:19:14] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Dialog Thread
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Waiting for Initialization event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Setting loading init Event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Finished Setting loading init Event
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Entering Main Message Loop...
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Finished Waiting for Initialization event
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Bar
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:15] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDependencyMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadCDInfoMgr()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDiskInfoMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:15] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadDatabaseValues
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({2C320A80-183E-4F7E-8832-66A0F5756221})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({B8A13F14-4BDE-4EC4-A53C-8E51FBB8261F})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({AA62DF98-3F2C-11D3-887B-00C04F8ECDD6})
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({E0875D42-A33D-4C64-81C9-167795F29CA4})
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] Setup.exe: GetCustomProperties()
[09/19/11,17:19:17] Setup.exe: get_CustomProperties()
[09/19/11,17:19:17] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:17] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] setup.exe: ***ERRORLOG EVENT*** : ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:18] vs70uimgr: Entering DisplayMessage() method.
[09/19/11,17:19:18] vs70uimgr: DisplayMessage_START:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:18] Setup.exe: CCoreEngine-Proc() - Finished Main Message Loop
[09/19/11,17:19:50] vs70uimgr: DisplayMessage_END:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:50] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:50] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunLoadSetup() - Failed to Run the Intro
[09/19/11,17:19:50] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:50] UTILS::RunNGENAction: Started
[09/19/11,17:19:50] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:51] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:51] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
Kindly to help me. I've done many things including the advice which is refer to:
http://social.msdn.microsoft.com/Forums/en/vssetup/thread/ebe334d3-c1ab-44ce-a449-b65940dac589
No luck at all.. -
im having a problem installing adobe air its telling me i may not have admin rights even though i do can anyone help me?
If you are mac, read
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml -
im having a problem installing adobe air its telling me i may not have admin rights even though i do can anyone help me?
im using windows 7
the error is
"an error has occurred while installing adobe air. installation may not be allowed by your administrator please contact your administrator" -
Having Trouble Installing Visual Studio 2012 Update 3
Hello. I have been attempting to install update 3 for Visual Studio 2012 Ultimate on Windows 7.
I get this error:
"Setup detected an issue during the operation. Please click below to check for a solution and help us to improve the setup experience."
There isn't an option other than "close program" and some text:
"A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I can't post links or pictures. Thank you.
FIXED ITHi,
Please use http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards,
Ego [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Problem installing Visual Studio 2010
Hi,
I am trying to install VS2010 on a Windows 7 running on a bootcamp partition of my Mac Book Air.
When I insert the DVD on the drive the splash screen shows "Visual Studio 2008 "... It should be 2010.
If I continue the installation it stops in the middle because of a missing file named DW20.EXE, but these file is there.
I have tested the same DVD in a regular PC and the installation went correctly, it installs VS 2010.
Thanks
Marcio ([email protected])ProfessorPinho wrote:
Hi,
I am trying to install VS2010 on a Windows 7 running on a bootcamp partition of my Mac Book Air.
When I insert the DVD on the drive the splash screen shows "Visual Studio 2008 "... It should be 2010.
If I continue the installation it stops in the middle because of a missing file named DW20.EXE, but these file is there.
I have tested the same DVD in a regular PC and the installation went correctly, it installs VS 2010.
Thanks
Marcio ([email protected])
You might try asking about this on a Windows 7 or Visual Studio forum as the issue appears to have nothing to do with Apple products. -
Hi,
I have ultimate VS 2012. Following direction here, http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
I installed this, http://www.microsoft.com/en-us/download/details.aspx?id=38807
Now all my infopath form when I click on Code Editor or On-load-Event.... the all give me error saying "infopath has encountered an error. The operation failed"
What is going on? How can I fix this?
p.s. I'm using C# as the language choice
thank you.I suspect you're running into a similar issue: http://www.sbrickey.com/Tech/Blog/Post/Office_2013_InfoPath_2010_Forms
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
In visual studio 2012 coded Ui test is not entering the URL
Hi,
When i try to run the recorded script it is opening the new tab but it is not entering the new URL in to tab. It is showing test has failed due to some stack trace error. I am new to coded UI test am learning it. Is it timing error i need to place some sleep
time in between them?
Thanks
Prasanth
PrasanthHi Prasanth,
Generally, the coded UI test is used to verify that the whole application, including its user interface, is functioning correctly. Coded UI Tests are particularly useful where there is validation or other logic in the user interface, for example in a web
page. They are also frequently used to automate an existing manual test.
In other words, we can use coded UI test to verify the UI control instead of verifying the URL.
For more information:
http://msdn.microsoft.com/en-us/library/dd286726(v=vs.110).aspx
However, if you want to record script it is opening the new tab and then entering the new URL in to tab, I suggest you can use the Web Performance test to record and verify the request works correctly.
Reference:
Walkthrough: Recording and Running a Web Performance Test
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problems adding a custom SSRS (PolygonsCRI demo project) control to Visual Studio 2012 toolbox
I've been trying to create a custom control in SSRS using the PolygonsCRI example. I've finally got the solution to compile in Dot Net 4.5 under Visual Studio 2012 targeting x86 architecture. (x86 seems to be the only way to compile without complaints
about architecture mismatch involving some of the key reporting DLLs.) I'm running VS2012 Premium, version 11.0.61030.00 Update 4.
I still can't use it in the Polygons demo reporting project.
I can add the DLL to the toolbox but all I get is a red rectangle and the message 'The custom report item type PolygonsDesigner is not installed'.
Suggestions? I'm out of ideas at this point.Hello,
You have "add DLL to Toolbox"?
See Jazz Up Your Data Using Custom Report Items In SQL Server Reporting Services => Deploying CRI: You have to Register you CRI in "RSReportDesigner.config" file.
See also MSDN:
How to: Deploy a Custom Report Item
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva -
Can't connect to VPN anymore after installation of visual studio 2012
I found that a similar question was asked, albeit for the previous version of Windows and visual studio
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/335e9de5-f183-4d03-a441-95bc151dc7d0
it took me few days to resolve an issue, so decided to share here.
as a headline goes the story was: I installed Visual Studio 2012 on Windows 8 and after installation an L2TP vpn connection gave error 789
the solution I found with my internet provider was to change in registry
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Rasman\Parameters]
"ProhibitIpSec"=dword:00000001
it looks though that this issue should be fixed, while my solution works it is hardly useful hint for most
affected ( if only they find a solution by search ).Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Regards.
Spencer
TechNet Community Support -
Connection String for Oracle from Visual Studio 2012
I have oracle Connection credentials which is to be connected to Oracle 9i.
I have Visual Studio 2012... i m trying to connect to the oracle host.. it gives the following error. "ora-12514 tns listener was not given the service_name"
1. I have installed 32 Bit Oracle Developer Tools for Visual Studio.
2. I m using Windows 7 OS 32 Bit
Please advice
HaiMaybe this one helps.
https://community.oracle.com/message/2310374
or possibly ask them here.
https://www.oracle.com/communities/index.html
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Silverlight 5 and WCF Ria Services Link Visual Studio 2012
Hi, I have a Visual Studio 2010 Project, I installed Visual Studio 2012 and Opened the Project with VS 2012. I can run the Project without issues but at design time the Web Project is no recognized as a valid reference.
My Silverlight application has a WCF RIA Services link to this Project. If I switch to Visual Studio 2010 I have not design time errors.
Why in Visual Studio 2012 my Silverlight 5 Project shows a message indicating the Web Project namespace does not exists?
Obiously the reference does not exists because is a WCF RIA Services link and VS Should infer the namespace.
I've notice that the generated code is being created with the right namespace, it's just that Visual Studio 2012 is not recognizing the classes in the generated code.
Help please.Hi,
You need add web service again for VS-2012. You can see the step by step process
http://atikpassion.blogspot.com/2013/01/add-service-after-migrating-silverlight.html
Hope it will help you.
Regards atik sarker -
Hello,
I am trying to install Visual Studio Community 2013 in my machine but when I start the setup process I get the followingerror message:
Setup Blocked
Visual Studio Ultimate 2013 is currently installed on this machine. Please uninstall Visual Studio Ultimate 2013 and retry.
The problem is that I used to have VS Ultimate 2013 (Preview Edition, I think) installed on my machine but I've uninstalled it some time ago. It looks like something was left over in process.
What I've tried to do was to install VS Ultimate 2013 again, perform a repair operation and then uninstall it again. This uninstall process is reported to be successful. However, it did not solve my problem: VS Community 2013 installation still fails.
Does anyone have an idea how to solve this?
Thank you,
João Pedro"I used to have VS Ultimate 2013 (Preview Edition, I think) installed "
Sorry to be the bearer of bad news, but this sort of situation is exactly why potential users of pre-release software are warned NOT to install test software on production systems. While a new software version is in development, one of the LAST things to
be finalized is the uninstaller. So, uninstalling a test edition often leaves behind unwanted artifacts.
In your situation, I'd do a clean install of my OS, then install VS.
Maybe you are looking for
-
I was trying to install windows 8 on boot camp but it said the disk couldn't be partitioned because some of the files couldn't be moved. So I went into disk utility and selected my HD (the second option) and clicked erase but I went super quick and I
-
I had a one month old Mac book pro and the hard drive fried! I was down loading a friends wedding pictures when it stopped working and started heating up. I plugged it in and turned it off as it was making a clicking noise. When I turned it back on t
-
Weblogic 8.1 and Novell LDAP SSL
Hi Everyone ! I'm having problems enabling SSL between Weblogic 8.1 and Novell LDAP. I have the non-SSL working. All the BEA documentation I've found indicates that the SSL Enabled checkbox needs to be checked and that's all. This can't be all becaus
-
Perhaps I'll have to take it back...was: Frustrated with lack of Creative Supp
Going nuts trying to get the X-Fi Fatality FSP card to work with my system. I've posted my woes and troubleshooting in this forum. I've called the Creative Support line and got a generic "try another PCI slot" suggestion. Also tried the email support
-
Hi guys, In all my DBs I have configure in the init.ora the parameter log_chepoint_interval=14400 and I supposed that manual saids that value are in seconds. This parameters force the archive the redo logs, Well I supposed that? or this equivalent to