Problem Maintaining BI Connection in CE

Hello Friends,
I am facing some what tricky Problem Maintainig the BI Connection in CE. The picture is worth 1000 words that why I have documented the whole Problem scenario in a flash video. You can see it here [see video|http://thomasdriessen.de/maintaining/Maintaining%20BI%20Connections%20Problem.htm]
Please let me know if you have some Idea where the Problem might be.
Thank in advance.
Farhan Shamim

Follow this step by step doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a

Similar Messages

  • Problems maintaining network connectivity in hotels

    I have a problem maintaining internet connectivity when I use hotel WiFi services where you have to "login" first via the web browser. I don't have a problem with the WiFi per se and I have no problems with initial connectivity -- I can login and browse the Web without problems. But if my MacBook goes to sleep, I can't browse, get email, etc when it wakes up.
    I don't have this problem at home - only when I travel to places where I have to first "login". This has been happening consistently since I got the MacBook 10 months ago and at various hotel chains around the country. Also when I have another laptop with me ( Windows ) I don't see this problem. Sometimes on the Windows machine I have to "login" again after it wakes up but I never have this opportunity on my MacBook -- the browser just hangs there, "loading" indefinitely.
    The only way I've found to fix this is to reboot my MacBook. I've tried Googling for a solution or even anybody else who has this problem and I've turned up nothing! I am really the only person having this problem?!? LOL...

    Unfortunately this is a fact of life with these types of hotel systems. Live with it or set your Mac to "Computer never sleep" when you are traveling and that occurs.

  • Problem Maintaining BI Connections in CE

    Hello Friends,
    I am facing some what tricky Problem Maintainig the BI Connection in CE.  The picture is worth 1000 words that why I have documented the whole Problem scenario in a flash video. You can see it here[ See Video|http://thomasdriessen.de/maintaining/Maintaining%20BI%20Connections%20Problem.htm]
    Please let me know if you have some Idea where the Problem might be.
    Thank in advance.
    Farhan Shamim

    Hello Farhan,
    are you sure that you have a load balanced R/3? If not try to use the system template "Dedizierter Anwendungsserver". Don't forget to specify all necessary information BI information as descibed in the online help. You may have a look at the NW 7.0 help as the system templates are very similar.
    The rest seems to be ok.
    Hope this helps.
    Stefan

  • I'm having problems maintaining a VPN connection on iPad. Any thoughts?

    I'm having problems maintaining a VPN connection on iPad. Any thoughts?

    Sorry to be vague but just drops out. Often citing insufficient bandwidth. However, I don't have the same problems using a 3g iPhone on the same wifi connection.

  • Laptop can't maintain wifi connection to my airport

    hi, I got a 1.67Ghz G4 power book w/ airport extreme card. (firmware version 405.1) been connecting to the web via my airport extreme base station (802.11n)
    recently the power book start to have problem maintaining the internet connection, it would connect, then drop off the connection after a few minutes, and the network name would also disappear as well like it does not detect the network. then reconnect again either by itself or by use internet connect, however, sometimes it does say there is an error connecting when I use internet connect.
    my desktop is also connected to the airport extreme base station via ethernet, and the connection has been fine.
    Is there a way to find out what is causing the problem? the base station? or the laptop?
    thank you in advance for your commends and suggestions

    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your PowerBook from getting a good clean signal. I suggest you perform a simple site survey, using a utility like iStumbler to determine potential areas of interference...and then, try to either eliminate or significantly reduce them.

  • SAP Screen Personas error "A problem with network connectivity has been detected"

    Hi,
    We just installed Personas release 100 SP02 and performed the
    configuration steps necessary. But when we acces the url and logon to
    personas we get the following erre
    A problem with network connectivity has been detected.
    Please check you connection and refresh your browser.
    Any help to solve this issue would be appreciated.
    Best Regards.

    Please use this checklist to see if everything is correct:
    1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
    2. SPRO -> Sap screen Personas -> Maintain system has
           - 3 letter system id
           - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format 
           - "Service.Uri" without typo and value as /restgui
    3, Note 2026487 is installed
    4. If target system is different from source system then you are able to access the following
             - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
             - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
    5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
    If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
    Thanks
    Chinthan

  • Devices (iPad, iPhone) no longer can maintain wifi connectivity with time capsule

    My iPad and iPhone can no longer maintain wifi connectivity with time capsule.   Time capsule has connectivity to internet via Macbook, but not other devices.  This started after upgrade of devices to s/w 6.0.  Does anyone know if that could impact connectivity?

    Yes, this is often reported with iOS 6.. there are definitely more wireless problems.
    I recommend you reset the TC in the following ways.
    1. Change all names to SMB type.. ie short, no spaces and pure alphanumeric.. that includes the TC itself, wireless and hard disk. I recommend a different name for 5ghz so you can force clients to that band without auto voodoo affecting it.
    2. Use WPA2 Personal security only.. 8-12 character pure alphanumeric passkey.
    3. Lock the wireless channels.. particularly for 2.4ghz.. pick one of the channels, out of 1, 6, 11 as these are the only ones that do not overlap.. test each in turn for the best and most stable. TC should pick the best itself but that is voodoo and I am preferring to run the system without black arts.

  • AppleTV - Maintaining Network Connectivity to Wireless Network

    Should my AppleTV always maintain its connection to my wireless network?
    Everytime I go back to my AppleTV, I have to re-establish my network connection by going under Settings>Network Configuration>Select My Network>Done, and then it will be OK...for a little while...
    I can then access the iTunes Movie Trailers, Music Videos, etc., but if I then go back to content on my AppleTV for just a few minutes and then try to go back to the iTunes content, the network connection has been lost.
    AppleTV; PowerBook G4; D-Link DI-714P+   Mac OS X (10.4.9)  

    What's the physical proximity of the router to the
    tv? Is there the possibility of a weak signal
    between the two?
    Also, have you tried changing channels on the router?
    I've had problems in the past on my 802.11g routers
    with interference from neighbours causing drop outs
    on the connections.
    Since most routers seem to come preconfigured for
    channel 1 or 6, you're often best to pick just about
    any other channel (since most of your neighbours
    probably won't).
    I'd also suggest turning OFF any proprietary network
    acceleration mode features that your router may have
    (ie, the features that some D-Link and similar
    routers have that provide a speed boost when using
    their own network cards).
    Have changed the channel it was set to auto but changed to 3 I think still same problem. The ATV is about 5 feet away from the router. Moved it from the other side of the TV incase that was blocking the signal. Also the ATV always has a full signal when connected.

  • Problem with JCo Connection Pool

    Hi,
    I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
    com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
    So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

    Hello,
    You need to increase the pool size via Visual Administrator.
    Server 0 -> Services -> JCO RFC Connections.
    Change the pool size from there. I believe a restart is in order.
    Regards,
    Jan

  • Problems with ipod connection.

    Problems with ipod connection.
    I have problems to connect my ipod to computer windows 7.
    When I connect I get the following error:
    "We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
    And it recognizes the ipod when trying to go play music or videos make me the following error:
    "Error while trying to copy on disk. The device is not connected."
    I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
    What else can I do?

    Hello,
    While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W.

  • Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

    I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
    The exact error message is as follows:
    "There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later."
    I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
    Any help you can give me would be appreciated.

    Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

  • Problem in establishing connection with mysql 5.0

    Hi,
    I am using JCAPS 5.1. I tried to insert data to mysql database table.
    But i got following error
    java.sql.SQLException: Error in allocating a connection. Cause:
    Physical Connection doesn't exist.
    My intention is to read file in which data are comma seperated and to
    populate those values to a mysql 5.0 database table.
    Sample DATA in file [test.txt]
    111,gg,23,MFG
    112,hh,24,MFG
    113,ii,25,RETAIL
    114,jj,26,IT
    Database table: employee
    eno,ename,eage,edept
    While creating JDBC OTD there is no problem in establishing connection with database. But after deploying i got above error.
    I have used Mysql 5.0 Connector/J JDBC driver. Added JDBC driver jar files to following directories as required.
    1) C:\JavaCAPS51\logicalhost\is\lib
    2)C:\JavaCAPS51\logicalhost\is\domains\test\lib
    Steps i have followed as per JDBC-ODBC -eway user guide doc.
    1) Created USerDefined OTD and added necessary fields
    2) Created JDBC OTD.
    3) Created JAVA collaboration and do business process for inserting
    4) Mapped all components by creating in Connectivity MAp
    5) created necessary external systems in envrionment explorer.[JDBC External System and File External System]
    6)Created Deployment profile
    5) Deployed it.
    After deploying it gives error as
    java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist
    Please let me know the solution for problem.
    Message was edited by:
    VenkateshSampoornam

    In the environment definition,
    -> External Application JDBC
    -> Properties
    -> Outbound JDBC Connection
    You have the database URL in the "DriverProperties" field
    Valid URL would be : jdbc:mysql://localhost:3306/caps
    !! The doc says that this field is optional !! Seems to be an error in the doc:
    Hope this helps
    Seb

  • Problem with client connect to server

    Hello
    I'm having problems trying to connect a Windows NT client to an Oracle 8.1.5.0.2 server running on
    Redhat linux 6.1
    I've setup the listener, which seems to allow a sqlplus client running on the server to connect to the
    database through the listener.
    <snip>
    $ sqlplus scott/tiger@8idb
    SQL*Plus: Release 8.1.5.0.0 - Production on Mon Apr 10 16:44:57 2000
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle8i Release 8.1.5.0.2 - Production
    With the Java option
    PL/SQL Release 8.1.5.0.0 - Production
    SQL>
    </snip>
    Listener.log
    <snip>
    10-APR-00 16:44:57 *
    (CONNECT_DATA=(SERVICE_NAME=8idb)(CID=(PROGRAM=)(HOST=dbserver)(USER=oracle))) *
    (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.10)(PORT=2816)) * establish * 8idb * 0
    <snip>
    But when I try to test the connection from the NT client using "Net8 Easy Config"
    <snip>
    Initializing first test to use userid: scott, password: tiger
    Attempting to connect using userid: scott
    The test did not succeed.
    ORA-12571: TNS:packet writer failure
    There may be an error in the fields entered,
    or the server may not be ready for a connection.
    </snip>
    Even though I have the following entry in the listener.log.
    <snip>
    10-APR-00 16:58:37* (CONNECT_DATA=(SERVICE_NAME=8idb)(CID=(PROGRAM=C:\Program
    Files\Oracle\jre\1.1.7\bin\jrew.exe)(HOST=NTclient)(USER=NTuser))) *
    (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.20)(PORT=2465)) * establish * 8idb * 0
    </snip>
    Though sqlnet.log is logging the follow
    <snip>
    Fatal NI connect error 12537, connecting to:
    (LOCAL=NO)
    VERSION INFORMATION:
    TNS for Linux: Version 8.1.5.0.0 - Production
    Oracle Bequeath NT Protocol Adapter for Linux: Version 8.1.5.0.0 - Production
    TCP/IP NT Protocol Adapter for Linux: Version 8.1.5.0.0 - Production
    Time: 10-APR-00 16:58:37
    Tracing not turned on.
    Tns error struct:
    nr err code: 0
    ns main err code: 12537
    TNS-12537: TNS:connection closed
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    </snip>
    The listener.ora is as follows
    <snip>
    listener=
    (description=
    (address_list=
    (address=(protocol=tcp)(host=10.0.0.10)(port=1521))
    sid_list_listener=(sid_list=
    (sid_desc=
    (global_dbname=8idb)
    (sid_name=8idb)
    (oracle_home=/home/oracle/product/8.1.5)
    </snip>
    Clients Tnsnames.ora file
    <snip>
    # Generated by Oracle Net8 Assistant
    8IDB=
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(PORT = 1521)(HOST = 10.0.0.10))
    (CONNECT_DATA =
    (SERVICE_NAME = 8idb)
    </snip>
    Any Help would be greatly appreciated
    Thanks
    Regards
    Tom
    null

    Hi Hasan,
    Firstly, please make sure that the software is compatible with the Windows Server 2012. Have you updated this software to the latest version?
    Secondly, please check if the software is listening on the proper port. To verify this, please use the command below:
    netstat -an
    Also, please disable the firewall and try again.
    Best regards.
    Steven Lee
    TechNet Community Support

  • I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

    I get an error message when trying to install software update 4.2.8
    "problem downloading, network connection timed out. Check network connections."
    Anyone one else had this problem?

    Brian-KK Sabah wrote:
    I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
    See Here for your Error Message -3259
    http://support.apple.com/kb/ts2799

  • Problems trying to connect to a network printer

    I am logged onto a network over a vpn. I am then trying to connect to the print services. If was using windows the following instructions are given:
    "You can print using icsafecom1, if you go to start, run and type in \\icsafecom1 then press ok it should ask you to input you username and password, you should then see a list of printers if you right click on the first printer called ictprintservice mono and say connect it should then connect you to the printers via the vpn. "
    Now I have no instructions for how to do this on a iBook. I have tried to connect to the server icsafecom and get to enter my username and password but the get an error (error code -50) and can go no further. I think that this might be a problem with server connections - console gives the following output:
    ===== Tue Nov 29 2005 ===== 11:28:53 Europe/London =====
    mount_smbfs: No credentials cache found krb5cc_getprincipal
    mount_smbfs: No credentials cache found krb5cc_getprincipal
    mount_smbfs: no shares found
    mount_smbfs: no share specified for ig05@ICSAFECOM1
    I have also tried to connect to the printer via the printer setup options but it is not clear how to do this either.
    Does anyone have any ideas about the problem as the support staff here are not mac literate!
    Many thanks.

    We got it!
    If helpful...
    The schema parameter on the idm resource configuration page references the name of the HelpDesk form. By default, it is HPD:HELP_DESK.
    Be careful...it is case sensitive.
    Tip: Check the ARSCHEMA table.

Maybe you are looking for