Problem Making More Than One ALSB Call From BPM

Hello,
I have a very simple BPM process, with a begin node, two automatic nodes, and an end node.
The first automatic node makes a call to a web service running on ALSB (ALSBServiceA)
The second automatic node makes a call to a second web service running on ALSB (ALSBServiceB)
What I find happening is that the second call is not being executed (ALSBServiceB)
The web service invocation from the first node executes okay, but it seems that the invocation from the second service is just ignored.
What is strange is that if I reverse the order of the nodes (e.g. executed ALSBServiceB before ALSBServiceA) then, the ALSBServiceB executes while ALSBServiceA does not.
It appears that in any process there can only be -one- successful invocation to ALSB, with all others being ignored. This is a pretty significant showstopper for us.
Is this a known issue/bug/feature?

Gary,
There is not much I can do from here without more specific details, but
the problem you describe is quite odd.
Try the following, it might help you diagnose it:
- Check the audit trail for one of the instances, to make sure that both
automatic activities were executed.
- Check the engine logs, see if there was an exception in the process
that's causing it to retry or abort the instances.
- Try running both calls from one activity.
If you can't find the cause, contact support. They will be able to help
you.
JC
On Thu, 22 May 2008 10:05:06 -0300, Gary Ng wrote:
Hello,
I have a very simple BPM process, with a begin node, two automatic
nodes, and an end node.
The first automatic node makes a call to a web service running on ALSB
(ALSBServiceA)
The second automatic node makes a call to a second web service running
on ALSB (ALSBServiceB)
What I find happening is that the second call is not being executed
(ALSBServiceB)
The web service invocation from the first node executes okay, but it
seems that the invocation from the second service is just ignored.
What is strange is that if I reverse the order of the nodes (e.g.
executed ALSBServiceB before ALSBServiceA) then, the ALSBServiceB
executes while ALSBServiceA does not.
It appears that in any process there can only be -one- successful
invocation to ALSB, with all others being ignored. This is a pretty
significant showstopper for us.
Is this a known issue/bug/feature?--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Similar Messages

Is possible to connect to more than one core WAE from edge?

Hi,
I am trying to find in the documentation, but it is being hard to solve, if it is possible to connect simultaneously to more than one Core-WAE from a Edge-WAE

With the release of 4.1, the concept of core and edge becomes less of a concern. All devices are edge and acceleration is between any edge device.
The WAE is looking for the present of TCP option 21. If found, the WAE knows there is a peer WAE it can accelerate with.
-Dan

Can you have more than one function fire from creationComplete?

I'd like to have several functions fire when I start a particular application. Is that possible?   Currently I run one function from the creationComplete .
Thanks.

You can also do creationComplete="firstFunction();secondFunction()". If you have more than two function calls or you need to call them all together later on I would do something like an init() function.
creationComplete="init()"
private function init():void
     firstFunction();
     secondFunction();

Problem deploying more than one session beans(one is ok)

hi there,
im trying to deploy an ear that contains ejbs(entities and session). application goes ok if deploy it with any number of entities being called by a single session, i mean if there is only session bean in the ejb-jar.xml. it is deployed ok and works fine.
now when i try to add another session bean to the same ejb-jar.xml, it gives the following error during deployment.
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
that's all what it prints and aborts deployment. again, its important that it deploys any number of entity beans problem is with more than one sessions.
thanx for any suggestions,
amt

Without seeing more details I don't understand why you would be running out of memory. We test applications with multiple session beans and we don't have that issue so I'm not sure why you would. Out of memory could be a bug in the deployment descriptor or the ear file or the JVM or the container or the deployment mechanism or maybe something else. That is the tough part of memory issue debugging at deployment time.
I would try to see if increasing memory on both the JVM for OC4J and for admin.jar (assuming you are using standalone OC4J when you deploy) to see if maybe it is something transient that is causing this to occur. Something else you could try is to use 1.3.1 JDK and see if the problem goes away. Beyond that I would try to get the simplest case you could that repeats the error and then let's take a look at it.
As for the exception hierarchy you describe, I don't see any particular problem with it at first look. Are you getting an error?
Thanks -- Jeff

I am having problems emailing more than one photo at a time - please help!

I would be very grateful if anyone can help. I have recently upgraded my old PowerBook G4 to Leopard 10.5.8, and since the upgrade I can't seem to send more than one image from iphoto at a time via mail. When I try, I get the message: " mail got an error: can't get paragraph 8 of content of outgoing message id 113491328. Invalid index." As I email a lot of images, it is a real pain only being able to send them one at a time. Can anyone help? With many, many thanks, Josh.

It could have something to do with the sizes of the images you're trying to send.
In the updated iPhoto, there's a selection for the size of the image. Try attaching the smallest size and see if that works for you.
Here's a related couple of threads related to the error that I found on a popular search engine
--> http://discussions.apple.com/thread.jspa?threadID=1666379
--> http://discussions.apple.com/thread.jspa?threadID=1667250

How to handle more than one message coming from an async BPEL in a sync BPEL process?

Here is the scenario,
Sync process A is calling an Async process B and Async process B is developed in such a way that it is returning more than one message to sync process A, how you will handle those messages in sync process A?

As durga said, its a wrong design, you will have issues in real time. You wont get the response back most of the time. It can be otherway around, async is waiting for sync process.
Change your design or provide what is your use case below, we can think of which design suits you.
Thanks,
Vijay

Problem with more than one item in a track

DVDSP 4.0.2 / OSX.4.2 I've built a DVD with several tracks. In each track I've placed several .m2v files, one after another. Finished build plays fine on my Mac and on one of my stand alone DVD players. But on another stand alone (Sony DVP-S360) something very odd happens. DVD begins to play just fine, but whenever it encounters a track with more than one source file, it will play until it gets to the spot in the program where the second source file is in the track and then it hangs and won't do anything. I'm just curious if anyone has any insight into this problem. Is it a DVDSP conflict thing with certain players? Or is this Sony player just not capable of playing a DVD built this way? Thanks.

This page here:
http://www.videohelp.com/dvdplayers.php?DVDnameid=428&Search=Search&
has someone talking about finally getting burned DVDs to work, which suggests they previously had problems. I can't think why the track would not seem like continuous video, as if it had always been that way. Our Sony DVD player at work seems sensitive to higher data rates. What data rate did you use?

Transmitting to more than one airport express from iTunes

Are there any plans to update the system so that iTunes can transmit to more than one AirPort Express or An airport Express and the computer at the same time?

paulcart, Welcome to the discussion area!
For quite some time, the ability to stream iTunes to multiple AirPort Express (AX) has worked.
Are there any plans to update the system so that iTunes can transmit to ... An airport Express and the computer at the same time?
We are all users like yourself and therefore have no special knowledge of upcoming changes. As you know from reading the "Help & Terms of Use" for this area, speculation on future Apple products or services is not allowed.

How to retrive more than one row value from table

hi,
I had create one table if i entered value in more than one row, the second row override the first row value and while printing it in flat file i am getting the second value entered twice.
i created one context for each column.
    plz provide me a solution..........
       very urgent..........
        Regards,
        Kiruthika

Hi,
Create seperate element for each row and then set values.
for(int i=0;i<4;i++)
IPrivate<view name>.I<node name>Element element = wdContext.node<node name>().create<node name>Element();
wdContext.node<node name>().addElement(element);
element.set<Att>();
to retrive:
int s=wdContext.node<node name>.size();
for(int j=0;j<s;J++){
wdcontext.node<nodename>.getnodeelementAt(j).getAttribute();
Check this link about tables
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/bad3e990-0201-0010-3985-fa0936d901b4
Regards,
Vijayakhanna Raman

Problem Using more than one patchset for Kernels

I'm using vanilla 2.6.10 sources, with the -mh4 bluetooth patch, but I also want to apply the -as patch, as Arch has now adopted it for the standard kernel. So I have the following lines in the PKGBUILD:
##### Apply any patches here, if you set the patch variable above uncommment the following line
patch -Np1 -i ../patch-2.6.10-as5 || return 1
patch -Np1 -i ../patch-2.6.10-mh4 || return 1
and I have the patches downloaded into the build directory. When I run makepkg, I get a HUNK FAILED error at the patching stage, and makepkg aborts. If I run it with the -mh4 patch only, it works OK.
I realise this is nothing to do with the PKGBUILD, which I am sure will produce a uniquely-named package in about 30 minutes or so. Would you have any general advice regarding the use of more than one patch?

yeah - i have done this with a few patchsets. it's easy if you know what you are doing.
i'll explain what is happening just in case you don't know - all patches are created based on the original code and work by matching existing code and replacing it with new code - if you apply one patch then another the first patch may alter some of the references that the second patch is try to match - so it fails. what you need to do is to check where it has failed.
it will say patching core.c or something and the it will say HUNK FAILED - that means the first patchset changed the core.c code and the second patch can't find what it is looking for.
you then need to open the first patch - find out where core.c was changed and how and then open the second patch to see what it now needs to look for and then you'll then have to make new diffs to finish the process or eidt the old diffs (which is tricky but shorter)
it ain't easy. if you have more than a few hunk failed don't even bother - there is no guarantee that they patches will provide a build-able kernel.
this whole process lies at the core of creating these massive patchsets - if you can combine both patchsets and get a successful build out of it you can consider yourself a novice kernel hacker. it can be done.
i can't help much more than that i'm afraid - i'll ask cactus to split these two posts too a new thread for you

Making more than one layer visible simulteneously.

Csn anyone show me how to select more than one layer, and make them all visible/invisible, without having to select each layer individually, and clicking on each eye icon individually? This is very tedious when needing to make a large number of layers visible/invisible.
Thanks for any tips.

Yes.
Add a new site and change the FTP/MobileMe/Publish to folder info just as you did with your current site.
They are independent of each other.

Problem :fetching more than one record

In the below code ,i am receiving error that '"fetch returns more than record"..Is there any way to solve this problem
declare
cursor cur_test is
select * from test_for_cursor where i=&i for update;
r test_for_cursor%rowtype;
r1 test_for_cursor.i%type;
begin
open cur_test;
loop
fetch cur_test into r;
exit when cur_test%notfound;
update test_for_cursor set i=r.i+2 where i=r.i returning i into r1;
dbms_output.put_line(r1);
end loop;
close cur_test;
end;

Try this
DECLARE
   CURSOR cur_test
   IS
      SELECT     *
            FROM test_for_cursor
           WHERE i = &i
      FOR UPDATE;
   r    test_for_cursor%ROWTYPE;
   TYPE r1_typ IS TABLE OF test_for_cursor.i%TYPE;
   r1   r1_typ;
BEGIN
   OPEN cur_test;
   LOOP
      FETCH cur_test
       INTO r;
      EXIT WHEN cur_test%NOTFOUND;
      UPDATE    test_for_cursor
            SET i = r.i + 2
          WHERE i = r.i
      RETURNING i
      BULK COLLECT INTO r1;
      FOR j IN 1 .. r1.COUNT
      LOOP
         DBMS_OUTPUT.put_line (r1(j));
      END LOOP;
   END LOOP;
   CLOSE cur_test;
END;Some correction.
Message was edited by:
michaels

Thunderbolt conundrum: Can more than one device operate from the same port?

Hello! I am using a macbook pro with one thunderbolt output. The thunderbolt is being used on a Universal Audio Apolo Quad analog/digital audio recording device. I would also like to add a second video screen to my operation as well. Can more than two devices be ran (via a splitter of some sort) from the Thunderbold port? If not, are there any workarounds?
Thanks!
Clint

Thanks for the reply. Back to the drawing board...

Jsp session problem when more than one user is loging from the same machine

Hi everybody,
I have created a login page and i use to store user name and password using sessions. It is working fine for one user from one machine. But if two or more users logged from the same machine, all the users are getting the same data as of the last user logged in. Also if one user is logged out all user sessions on that machine are expiring (same as previous YAHOO problem).
i think there is problem with session variables. The user name and password which i am storing in session variables are updating the same variables for all users. I think a seperate set of session variables are not creating for each user login.
Can any body help me plz....
regards,
Prasanth.C

First, you need to clear any cookies you are setting.
Second, you need to synchronize some key data fetching blocks in your servlet.
Third, ensure that you are invalidating a session properly.
Don't ask me for more details. Google around for information ;)
Richard.

Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords. More than one account downloaded from older Laptop. Now the computer has the turning wheel in from of gray screen and won't go any further when

I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se. I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc. Can't keep them straight even though I write everything down. The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black. When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that. Then I held the on button in the back until the screen went black again.
What should I do? Is there a way to combine all my accounts into one account with one Apple ID? I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them.
In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
Very confused. Any Ideas about how I can get the computer to start up again and show a new screen?
Thanks to anyone who has workable suggestions.

If you really believe that your system has been compromised, here's what you do:
Disconnect your Mac from your cable modem;
Back up any documents on your system that are important to you;
Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
Choose a language and click the arrow button to continue;
From the Utilities menu, choose Disk Utility;
In Disk Utility, select your computer's hard drive;
Click the "Erase" tab;
Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
Click the "Erase" button and allow it to process;
Once the "erase process has completed (it will take a while), reinstall Mac OS X.
Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
Regards.

Problem Making More Than One ALSB Call From BPM

Similar Messages

Maybe you are looking for