Problem On PO List for Good Recept

Hello,
I have a problem. when a user wants to make good recept en a PO he wants to display the PO he has to recept.
So for the period he is selecting "Last year" and our PO doesn't appears BUT when we keep "Last year" and add the PO number. The research finds our PO for reception...
Why the research doesn"t find it whith only the period.
THANKS A LOT FOR YOUR HELP IN ADVANCE!!!

Hi,
You can not assign More than One Class to "Release Groups".
Create all the Characteristics for RFQ, Contract, PO etc for CEKKO table ...
Then Assign all these Characteristics to a Class...
Then maintain
Release Groups
Release Codes
Release indicator
But Create Diff Release Strategies for RFQ, Contract & PO...
for each Release Strategies you can maintain Same Release Group or Diff Release Group..
whenever you are trying to create Release Strategie, You will Blank Characteristics for that "Release Strategies",
There you can select the parameters.
Thx
Raju

Similar Messages

  • Outbound Idoc for Goods Recept

    Hi All,
    I need to setup Idoc for transfer posting from storage location to storage location,So currently there is no outbound process code for trigerring outbound idoc from SAP system to external system.
    I hope we have to create a new output type and segments to do this.
    B'coz , WMMMBXY and its segments are used for inbound idoc creation during GR. and theFM for this process is    L_IDOC_INPUT_WMMBXY
    Can somebody help me in writing an  outbound idoc program for goods receipt done in MIGO.
    Thanks in advance.

    Hi Shazia,
    Speaking in terms of EDI Idocs, system is not prepared for send Goods Receipts because normally is an incoming message not the opposite. All the output messages you can find are for printing purposes.
    So you need to configure everything for Output Determination and create a new function module to capture NAST message determination, retreive GR data, populate the Idoc and distribute it. Finally you have to create output process code, partner profile, port, rfc, distribution model, etc. etc.
    Your starting point is next IMG activities to configure new output type for EDI medium for application ME: Material Management>Invetory management and Physical inventory>Output Determination.
    Reward points if useful
    Roger

  • Help make the reading list (safari) go away --FOR GOOD (not just unchecking preferences--that is not a solution)

    The READING LIST feature on safari is soo freakin annoying. Even after unchecking it in bookmark preferences, everytime I signin someplace, I still see it invisibly recording my information. The reading glasses icon isn't in my bookbar anymore, but I see a small puff go up in the left side of my screen. How can we make this stop? I even confirmed it's true, because AFTER turning it off under preferences, when I went back to turn it on just to check hours later, I was horrified that it still kept collecting information through sites I visited. This feature's invasive and irritating. Is there a way to terminate the reading list for good???

    You can turn off Reading List by clicking the reading glasses icon.

  • Cant able to do UD for Goods Receipt Inspection against Purchase Order

    Hi Experts,
    I am facing problem while doing UD for Goods Receipt Inspection against Purchase Order.
    The Problem is,
    "Selected set code does not exist, or data entered is incomplete
    Message no. QV121
    Diagnosis
    Code  in code group * (selected set 1000 in plant ) does not exist.
    Procedure
    Enter a valid combination or complete combination, or make sure that the combination is available in the selected set."
    And the Result Recording for Inspection lot is completed.
    kindly suggest..
    Thanks in Advance,
    Naveen

    Hi Naveen,
    1.     Go to QCC0 > Quality inspection  >  Inspection lot creation  > Maintain Inspection Types > Select 01 (or the type which you are using) and double click on it.
    2.     Check what code is maintained in UD Selected Set
    3.     Create the same code in QS51 for your plant.
    Regards,
    Anand Rao

  • Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. .  How can i delete them off my phones memory for good?

    Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. .  How can i delete them off my phones memory for good? iPhone 4S

    At the present time, the only way to clear that is to restore the phone as new.  Perhaps a future iOS update will give us the option to clear that cache.

  • Problem for Goods Receipt for Subcontracting Purchase Order

    Dear all,
    Presently, we are using SAP version 4.6C and we need to introduce GR for
    Subcontracting Purchase Order. We have developed a ABAP program to handle
    subcon Goods Receipt by uploading flat-files from our subcontractor. The
    scenario is as follows :
    Goods Receipt for Subcontracting Purchase Order
    1. In the ABAP program, function BAPI_GOODSMVT_CREATE will be used for goods
    movement.
    2. Data provided to the function are as follows :
    - Posting date
    - Document date
    - Material number
    - Plant
    - Storage location
    - Batch
    - Movement type (101)
    - Quantity
    - Purchase order number
    - Purchase order item
    - Movement indicator (B - Goods receipt for purchase order)
    3. The function will do data verification and automatically determine GI
    item for subcon stock:
    - Movement type (543)
    - Special stock (O - parts prov. vendor)
    - Material
    - Quantity
    - Plant
    Our problem is that :
    Only the GR item in the interface is to be transferred and the GI item is
    determined by the system. So, the quantity for subcon stock cannot be
    changed using this BAPI. Then the system will continue processing the goods
    receipt and create material document.
    Manually, by using transaction code MIGO, the user can display the subcon
    stock data and then change the quantity.
    By using transaction code MB01, after the user fills in all the GR fields,
    the system comes to line item 002 (subcon stock data) and then quantity can
    be changed.
    As per user requirement, quantity for GI item must be same with the quantity
    that has been transferred to subcon vendor in Delivery for Subcon
    (transaction code VL02N).
    We cannot achieve this requirement by using the BAPI mentioned above. Would
    appreciate any valuable help from anyone who is able to help us on this
    matter. Are there any other BAPI's that can help us to achieve the same
    result ?
    Thank you in advance and best regards.

    As far as i understood the problem I suggest u to create the
    BDC according to user actions that are performed in he manual
    operation.
    I can't say that the BAPI performs the exac solution what you want.
    I have done some BDC work using MB01 and suggest you to be careful
    and try to keep the complete in the logic as some chages in rows in BDC will
    change the complete scenario.And throw correct quantity val in correct
    material
    row.
    This methodology will help u even in mass uploads.
    Or in case of automation u can perform the call transaction BDC in
    background mode.
    so As per my understanding bdc program is the solution. pls try and let me
    know.

  • Problem when Add Serial Number for Goods Receipt PO Document

    Dear All,
    In my App I have function to Add goods receipt PO and Serial for these items of this document as code bellows:
    oGrp = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                'Add Header Goods Receipt
                oGrp.CardCode = "CC1"
                oGrp.CardName = "Card Code 1."
                oGrp.DocDate = now
                oGrp.DocDueDate = now
                oGrp.TaxDate = now
                Dim Qty As Int32 = 2
                For i As Integer = 0 To Qty - 1
                    oGrp.Lines.SerialNumbers.SystemSerialNumber = 1
                    oGrp.Lines.SerialNumbers.ManufacturerSerialNumber = "MSR01" & "-" & i
                    oGrp.Lines.SerialNumbers.InternalSerialNumber = "ISR01" & "-" & i
                    oGrp.Lines.SerialNumbers.SetCurrentLine(i)
                    oGrp.Lines.SerialNumbers.Add()
                Next
                oGrp.Lines.ItemCode = "YMY2H-BLACK"
                oGrp.Lines.ItemDescription = "My Item"
                oGrp.Lines.Currency = "USD"
                oGrp.Lines.Quantity = Qty
                oGrp.Lines.Price = 10000
                oGrp.Lines.DiscountPercent = 0
                RetVal = oGrp.Add()
                If RetVal <> 0 Then
                    oCompany.GetLastError(ErrCode, ErrMsg)
                    Return -1
                Else
                  End If
    When Add this document I have Error : "You should use existing serial/batch numbers for this document type ". Please help me fix this problem. In my SAP doesn't have Serial for these item. Please let me know How to add serial master data?
    Thanks & Regards

    Dear,
    Thanks for your support but when I chaged code as bellows:
    oGrp = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                'Add Header Goods Receipt
                oGrp.CardCode = "CC1"
                oGrp.CardName = "Card Name."
                oGrp.DocDate = MyArrContainDocInfo(2)
                oGrp.DocDueDate = MyArrContainDocInfo(3)
                oGrp.TaxDate = MyArrContainDocInfo(4)
                Dim Qty As Int32 = 2
                oGrp.Lines.ItemCode = "YMY2H-BLACK"
                oGrp.Lines.ItemDescription = "My Item"
                oGrp.Lines.Currency = "USD"
                oGrp.Lines.Quantity = Qty
                oGrp.Lines.Price = 10000
                oGrp.Lines.DiscountPercent = 0
                For i As Integer = 0 To Qty - 1
                    oGrp.Lines.SerialNumbers.SetCurrentLine(i)
                    oGrp.Lines.SerialNumbers.SystemSerialNumber = i
                    oGrp.Lines.SerialNumbers.ManufacturerSerialNumber = "MSR01" & "-" & i
                    oGrp.Lines.SerialNumbers.InternalSerialNumber = "ISR01" & "-" & i
                    oGrp.Lines.SerialNumbers.Add()
                Next
                RetVal = oGrp.Add()
                If RetVal <> 0 Then
                    oCompany.GetLastError(ErrCode, ErrMsg)
                    Return -1
                Else
                              End If
    I have the same Error: "You should use existing serial/batch numbers for this document type". I try config in Gerneral Setting Form as image bellow: [http://www.hoanghaicap.com/GS.png|http://www.hoanghaicap.com/GS.png]. Please help me fix this problem. I try Add Goods receipt PO with items manage by Serial it's OK but by SDK it's not OK.
    Thanks & Regards,
    Edited by: Tao lao on Mar 10, 2010 2:44 AM

  • HT2736 why am I getting a message suddenly that I am exceeding the gift card limit on my iTunes id for buying gift cards?    I have never had a problem before and have a good credit card on file.

    why am I getting a message suddenly that I am exceeding the gift card limit on my iTunes id for buying gift cards?    I have never had a problem before and have a good credit card on file. I bought a $50 card for my son and then went to buy another one and it was refused and has continued to be for a week telling me a I am exceeding the gift card limit for my account? Insights here?

    Interesting.
    Didn't know Apple accepted PayPal as a payment option in some Stores. Cause they sure don't over here.

  • Report for list of good receipt document against advance document

    Dear all,
    Good Morning.
    I want list of pending purchase order in which advace document is created but good receipt document is not created.
    Like.
    I have create one purchase order & also create down payment request with F-47. Payment also done by f-48.
    Now i want below mention detail
    1) List of purchase order in which advance is done but good receipt document is not created i means material is not received.
    2) If good receipt document is created then list of good receipt documents.
    Above both report required with advance document no. & purchase order no.
    Regards,
    Mahesh Wagh

    List of purchase order in which advance is done but good receipt document is not created
    i means material is not received.
    Use report ME2N with scope of list 'ALLES',selection parameter - WE101
    If good receipt document is created then list of good receipt documents.
    Use report ME2N With Scope of list 'ALLES',Selection parameter - RECHNUNG

  • Problem when creating standard recipient list for all documents

    Dear All,
    I am facing 'NO_RELATION_EXIST' dump issue. So i am following note 509191 provided by SAP. At the moment i am trying 2nd  option i.e. for automatic document distribution, i am trying to create one standard recipient list for all documents to be released. However when i try creating a recipient list it does not allow me to create for a particular document type. As i can see there are 2 important key fields Document no and Document type. But i want to create only for a document type. The reason for that is this document type is for a PR attachment. So as soon as a PR gets released by the final approver this distribution should happen, irrespective of document number.
    Please let me know if this is possible. I would like to apologize if it's too simple of a question as i am an ABAP person and have no knowledge in DMS. And there is no DMS consultant whom i can approach.
    Thanking in advance.
    Regards,
    Saud

    ...distribution should happen, irrespective of document number...
    This wouldn't be feasible because documents are identified in the recipient list by both,the document number and document type and hence are mandatory inputs.
    Regards,
    Pradeepkumar Haragoldavar

  • Problem in displaying dynamic values in dropdown list for each row

    I want to display dynamic values in a drop down list for each row, and these values depends on the column value in each row(ptaid), based on each ptaid i need to fetch values for drop down list. so how can i achieve this..
    Thanks
    Babu

    Babu,
    This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
    http://www.mukx.blogspot.com/
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Putaway list for HU Goods Receive

    Hello Gurus and Friends,
    If a TO is created for every HU from an Inbound Delivery, how can I print a putaway list for all the HUs of the Inbound Delivery?
    Thanks and cheers.

    Hi,
    You can print the list with the help of LL01 report.Please check whether in your system this report is in place.
    Hope this will resolve your issue.
    Regards,
    Prashant

  • Idoc Type for Goods Receipt against a PO

    Hi ,
    The Goods Recept is already done in my legacy system, So my interface updates the goods receipt in SAP based on goods receipt done in Legacy system.
    I receive following data:
    Plant
    Purchase Order Number
    Line Item
    Pack List Number
    Material Number
    Quantity
    Storage Location
    GM_CODE = '01'
    MVT_IND Movement indicator = 'B'
    So I want which Standard Idoc Type I can use for this.
    I reffered to Note 833603.
    In that
    1. WMMBXY (WMMBID01, WMMBID02) and
    2. MBGMCR (MBGMCR01, MBGMCR02) is mentioned.
    Which one I should Use, as this GR is done again PO so its mandatory for me to pass Purchase Order Number and line item.
    Plz guide me which IDOC type i shd choose.

    Hi,
    Use the message type WMMBXY, IDOC Type as WMMBID02 and the function module is L_IDOC_INPUT_WMMBXY (Process Code WMMB) to process the Goods Receipt against a PO.
    I have successfully used that in many projects till now.
    Please let me know if you have any queries.
    Thansk,
    Mahesh.

  • I've iPhone 4s, and I am trying to update it to iOS 5.1 I've downloaded the software from iTunes, but when I click to install it, it says: "There was a problem downloading the software for the iPhone 'Donnbjj1's IPhone'. An unknown error occurred (1480)"

    I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • New iphone, intermittent "no service" indoors in good reception area

    Hi. I'm new here.
    I've had an iPhone 4 for over 2 years on O2 in the UK, and I've always been able to use it indoors at home. Yesterday, I received my brand new SIM-free iPhone 5, and I plugged in my new Vodafone pay-monthly nano SIM. I moved to Vodafone because they have a good coverage reputation.
    According to Vodafone, I live in a good reception area, but indoors the phone signal indicator is moving between 3 bars and No Service. If I leave it on a table, it can change from good to bad over a few minutes, then get better again. This never happened with my old iPhone.
    I have called Vodafone, and they say there isn't a service problem at the moment.
    I have tried Reset Network Settings, and given the SIM a quick clean.
    So, my next line of support would be Apple. But before I contact them, I wondered if anyone here had any advice?

    Thanks for the suggestion. I should have said that it was one of the first things I tried. Sorry.
    I had a brainwave: I remembered I bought a cheap pay-as-you-go Nokia phone on Vodafone for my kids in August. I switched it on, and put it next to the iPhone 5 on the table, and it's been showing 5 bars for the last 20 minutes. I'm no telecoms engineer, but that suggests to me that the Vodafone network signal is probably ok, and I can rule that out.

Maybe you are looking for