Problem on text autocomplete item

Hello Everyone,
I have a problem about text autocomplete item.
source of this item is database. I use an query for item.
Select * from departments
A row of data is "Communication & Management".
But, this row is seen as "Communication &amp Management" in iştem. "Escape character" property of this item is "yes"
How can i this problem ?
Edited by: ksql on 11.Mar.2011 23:40
Edited by: ksql on 16.Mar.2011 00:34

Hi,
Try change "Escape character" to "No"
Regards,
Jari

Similar Messages

Problem with text/HTML item in 9.0.2

Hi
When I add a text item in Portal 9.0.2, the built in HTML editor makes changes to the HTML as entered.
Is there a way to prevent this?
Regards
Harry

Hi
The changing of relative to absolute is the one that bothers me. I think it also added line breaks, which caused problems with gaps appearing between images.
The other one I remember is adding <tbody> tags to a table.
I would prefer it if one could prevent the editor from making any changes in the HTML whatsoever. As an option maybe.
Is it possible to create a simple HTML item as a shared component that one could drop into any page?
Regards
Harry
What changes are you seeing?
I know that the editor converts relative links to absolute links (a bug has been logged for this and the issue is mentioned in the release notes).

SAP SCRIPT Header text and Item text not printing in customized PO

Hello Experts,
                      I have copied the standard MEDRUCK to ZMEDRUCK and customized the form according to the requirement.
I want to print the header text and Item text in my form.
For Header text I have used :
/: INCLUDE &EKKO-EBELN& OBJECT EKKO ID F01
Problem 1: The text what I enter in header text is flowing only when I hit on print preview without saving the form. Once I save the SAP SCRIPT and click on print preview the field is appearing blank. I also tried to print the form, but the field is appearing blank even on the print out.
Problem 2: For item text the field is concatenation of EBELN & EBELP. Can anyone suggest me how to concatenate and fetch the text in item text.

Hi,
    Im getting an error in my subroutine pool for i_xtline which is to fetch ITEM TEXT., It says its not a in any internal table nor defined as data. How can I proceed further. I have pasted my code below. Please check and revert ASAP
PROGRAM ZMEDRUCK_SUBP1.
TABLES: EKPO, EKKO.
FORM fetch_table_data TABLES in_tab STRUCTURE itcsy
                             out_tab STRUCTURE itcsy.
data xname like THEAD-TDNAME.
data i_xtline like xtline.
clear i_xtline.
refresh i_xtline.
CONCATENATE EKPO-ebeln EKPO-ebelp INTO v_item_text.
MOVE v_item_text to ITEMTXT.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
    id                            = F01
    language                      = EN
    name                          = ITEMTXT
    object                        = EKPO
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = i_xtline
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.

Header Text And Item Text in Sales Order

Dear ALL
First one:
I have two different problems with text in sales order, when i create sales order after giving all the information like customer and material.
If i navigate through the Go To-- > Header ---> Text then there is a dump is any idea what all i need to check?
Error Message
A RAISE statement in the program "SAPLOLEA " raised the exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
The termination occurred in the ABAP/4 program "SAPLOLEA " in
"AC_SYSTEM_FLUSH".
The main program was "SAPMV45A ".
The termination occurred in line 27
of the source code of program "LOLEAU02 " (when calling the editor 270).
Second one:
when i am creating the sales order without enter the quantity , customer and material if i navigate through the Header Text or item Text i can able to go but there in no dump, the moment i enter the quantity for the material then it over writes all the text in item and header.
Any suggestions please?
Thanks & Regards,
Veer

Dear Veer,
          Please take the help from the technical people to fix the issue because it may related activation some Z developments which are related to the text.
Check the text determination procedure configuration settings also whether the text is calling from the Customer master and Material master.
If the text is calling from the master data maintain the text in the master data then try.
I hope it will help you
Regards,
Murali.

Problem sending texts

I'm having a problem sending texts to certain numbers. I have been able to send them before, but not any more. Delivery report tells me it's been delivered, but the recipient says nothing has arrived. It only seems to happen withcertain numbers.

If the messages are in your "sent items" folder, then they have successfully left your phone and non-delivery is down to either the network or the phone at the other end.
As you are getting delivery reports, I would suspect that the receiving phone has some kind of filtering system like that featured in some Nokia Series 30 phones which is filtering the message into a separate folder instead of the user's inbox.

Problem with Textfield autocomplete -- only uses the INSTR function

Hi dev team,
I use the new APEX "textfield autocomplete" item type and got a really damn problem with it.
I have a table with an index on the same column which I want to search with the autocomplete field.
Index:
CREATE BITMAP INDEX TEST.GEO_DATA_IDX1 ON TEST.GEO_DATA (postcode)
NOLOGGING TABLESPACE TS_INDEX;Select which is automatically generated by APEX 4:
SELECT   a.*
FROM   ( SELECT   DISTINCT postcode AS RV
              FROM   TEST.GEO_DATA
             WHERE   country_id = :P1_COUNTRY
          ORDER BY   1) a
WHERE   INSTR ("RV", :p$_search_string) > 0 AND ROWNUM <= :p$_max_rows;
-- plan
Plan
SELECT STATEMENT ALL_ROWSCost: 4,308 Bytes: 45,31 Cardinality: 1,97
     2 SORT UNIQUE Cost: 4,307 Bytes: 45,31 Cardinality: 1,97
          1 TABLE ACCESS FULL TABLE #TABLE# Cost: 4,306 Bytes: 47,311 Cardinality: 2,057 In APEX 3 I used the addon from Tyler Muth with my own Select:
SELECT   DISTINCT
            postcode AS DV,
            postcode AS RV
     FROM   TEST.GEO_DATA
     WHERE   country_id = L_COUNTRY
     AND    postcode like l_search||'%'
     ORDER BY 1
-- Plan
SELECT STATEMENT ALL_ROWSCost: 840 Bytes: 152,867 Cardinality: 13,897
     8 SORT ORDER BY Cost: 840 Bytes: 152,867 Cardinality: 13,897
          7 HASH UNIQUE Cost: 838 Bytes: 152,867 Cardinality: 13,897
               6 VIEW VIEW index$_join$_001 Cost: 836 Bytes: 232,111 Cardinality: 21,101
                    5 HASH JOIN
                         2 BITMAP CONVERSION TO ROWIDS Cost: 31 Bytes: 232,111 Cardinality: 21,101
                              1 BITMAP INDEX RANGE SCAN INDEX (BITMAP) #INDEX#
                         4 BITMAP CONVERSION TO ROWIDS Cost: 45 Bytes: 232,111 Cardinality: 21,101
                              3 BITMAP INDEX SINGLE VALUE INDEX (BITMAP) #INDEX#Is there a chance getting my INDEX used by the new APEX item? I guess not. But I still want to ask before I rebuild everything. :)
Best regards,
Tobias

Hi Tobias,
I assume you are currently using "Contains & Case Sensitive" for the "Search" attribute. Have you already tried out "Exact & Case Sensitive"? Because that will internally use the LIKE operator as your original query does and because the % is at the end it should enable the use of an index. But it might still not work, because the ORDER BY might be executed at a different time than in your original example, but it's worth a try.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Text Line Item to Quality Inspection

Hallo,
Is there a way to have PO Text Line Items posting to Quality inspection by default?
regards,
Marco

Dear Marco,
Following Options are available
1)If you want to put the item always in Quality inspection irrespective of supplier , go to material master purchasing view tick the block for " Post to inspection".With this whenever material will be received it will go into inspection stock
2) If you want to put a material for a particular vendor then in PO tick "post to inspection stock"
3) You can also at the time of GR put the material in inspection stock with Movement 101 & in Drop down box select - Quality stock
I hope this will solve your problem.
If useful pl. reward points,
Vivek Maitra

WAD: Inhibit Export Text Web Item

There is a Text-Web-Item in our Template which is not bound in the export command.
That´s why this Text-Web-Item was never exported in the past.
Now we´ve made a upgrade from SAP BW 7.0 to SAP BW 7.31.
And now the same Text-Web-Item will be exported (even though it is still not bounded in the export command).
We´ve found out that this problem (under SAP BW 7.31) only exists if a Text-Web-Item is inside a container.
Text-Web-Items that are outside of a container still won´t be exported.
Any ideas how to prevent this Item from export?

That would be technically possible, but I don´t want to change 400 Templates
Because the problem exists since upgrade to 7.31, I´m looking for a reason and a fix without changing all existing templates.
We´ve found out that the problem only exists if a container with layout-type "dynamic" is used. If I change to "GRID" the Text-Web-Item will not be exported. Is this a bug?

Problems writing text on Photoshop CC

I am having problems writing text on Photoshop CC - the image goes black.

Windows 8? Update your video card driver from the GPU maker's website. If you cannot update your driver (like on a locked laptop machine), then set the GPU drawing mode in Photoshop to "Basic" and relaunch the app.

Solved: InDesign CC: Problems with text in text box: text flows around invisible object

I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
Solution:
There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

Arthur, Garry
Would be great if you could send the files as attachment in an email to [email protected]
Else, you may post here using these steps: http://forums.adobe.com/message/3994281
Thanks!
- Neeraj

ID CS5: Problem with Text Wrap being Forgetful :(

I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
Ignore Text Wrap IS NOT selected.
The text box IS below the images.
The copy is flowed throughout the document.
Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
"Wrap around bounding box" IS showing as selected for the image/images.
There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
The images / text box order is not changed between being correct and being incorrect.
Anyone else with this trouble? And, if so, how did you fix it? Thanks,
A. Henson
InDesign 7.0.3
iMac i7
8GB RAM
OS X 10.6.6

@henson26,
I emailed you offline to see if you can provide me with an example file that shows the problem.
Matthew

Problem setting a hidden item value when button clicked with dynamic action or pl/sql process

Apex 4.1
Oracle 11g
I have a page that consists of a main region and several sub regions. I have a pl/sql process in After Header SET_DISPLAY(:P400_DISPLAY :='MAIN';)
Three subregions have a contional display where P400_DISPLAY = STORE. This works in hiding the sub regions.
Now I want to change the P400_DISPLAY value to STORE to show the subregions when I hit a button.
I tried creating a dynamic action for on click of the add button but get the following error:
The selected button uses a 'Button Template' that does not contain the #BUTTON_ID# substitution string
I went to the templates and found:
Substitution Strings
Substitution strings are used within sub templates to reference component values. This report details substitution string usage for this template.
Substitution String
Referenced
From
Description
#LINK#
Yes
Template
To be used in an "href" attribute
#JAVASCRIPT#
No
To be used in an "onclick" attribute
#LABEL#
Yes
Template
Button Label
#BUTTON_ATTRIBUTES#
No
Button Attributes
#BUTTON_ID#
No
Generated button ID will be either the button's Static ID if defined, or if not will be an internally generated ID in the format 'B' || [Internal Button ID]
I then tried creating a page process, pl/sql, :P400_DISPLAY :='STORE'; when the appropriate button is pressed. The button action is submit page. However, it does not change the P400_DISPLAY value and the subregions stay hidden.
Suggestions please on how to fix the template or change the P400_DISPLAY value?

The root issue is that, although you change the value of your page item, it isn't visible to other areas of the page until it is in the session. So, any other action based on the value of your page item; the visibility of a control, a report based on the item's value, etc. will all be unaffected by changing the value of the page item until it has been changed in the session. Even after this the items are stored in the session, you must thereafter do something to cause the value to be reevaluated. To see the effect of this, observe that your page loads and evaluates the value of your page item, it sees that is "MAIN" and hides the regions. However, it doesn't reevaluate them after this.
So; your choices to get this value set in the session are to either Submit the page, or use JavaScript to set the value in the session. If you use the latter of these, you'll have to do some further work to cause the visibility tests to be re-run, So, let's stick with with the submit method.
What you've done above sounds correct for this but, there are a lot of decisions you could have made that might have caused things not to happen in the correct sequence.
Firstly, let's confirm that what I describe above is your problem. From the development environment, load the page, click the button to change the value and submit. Now, click the link labelled Session. Is it still set to MAIN? If so; this is your issue.
Let's start with the your After Header computation. Did you set it to *only* run if the current value of your page item is NULL??? If not, that's your problem.
Load Page -> Item set to 'Main' by Computation -> Click Button -> Item set to STORE -> Submit -> Load Page -> Item set to 'Main' by Computation
See the problem?
Assuming this isn't the issue, you created a Branch to the same page, right? What is your process point for the Branch? Is it *After* Validation, Computation etc? Because if not, you aren't changing the value before the submit happens.
I bet it is the first issue but, take a look at these.
Cheers,
-Joe

Item text at item level of PO

Hi,
I have obeserved the material PO text at item level " text tab" of the PO , from where this text comes to PO ? . I have checked the material master , but it is a different text to that of in PO item text tab . Did it enter by User .
Please advise.
Regards,
Amara

I hope you trust SAP, if so, then read Note 448814 - FAQ: Texts in purchasing
Among many many valuabe backgound you can find this:
In the info record (purchasing-organization data) you can set the "No MText" indicator. What effects does this indicator have?
Answer:
Setting this indicator has the following effects:
When creating a purchasing document: The copying of all texts from the material master is suppressed.
When printing a purchasing document: the purchase order text from the info record is printed instead of the text from the material master.

How to change the text of item's displaying in the folowing ALV.

Hi Experts,
I want to change the text of item's displaying in the folowing ALV.
Go to ME23N->Click 'Messages'->Click 'Further Data' -> Click 'Displ.Originals'.
Here one small ALV grid is appearing.
Currently it is showing same name's under the 'Title' column of that ALV. My requirement is to change the text coming under the column 'Title' in that display.
Can any one throw some light in the issue.
Thanks&Regards,
Anversha

Hi Anversha ,
i think you need to use Enhancement point for it.
check the program DV70AF0A-->ARCHIV_ANZEIGE(Subtoutine).
i had similar kind of requirement ,while attaching the supporting documents to FI document , i need to update title field with File name , so i used EP and BADI to do so.
regards
Prabhu

Text sending problems - random texts getting through

Has anyone had this problem? i have a 3g and have the latest software 3.1.3. one particular number is not receiving all my texts. I get no error message, the bar shows the message was sent and my friend simple does not receive all the message. it is pure random, happens any time of day, any location i am in and any length of message. sometimes as little as one a day goes missing and sometimes as much as 5 a day. Both phones have had new sim cards put in and I have even had my iphone restored (and not from a backed up version of the phone) and swapped out. the lost texts even happened when the iphone was in factor settings with no aps, music or pictures in it. I have been transferred back and forth from att and apple. trouble tickets were opened on both numbers by att and att says there is no problems with the network and that all texts are properly delivered and there is no block on either number - yet messages still get lost. we've both have removed each other's contact and replaced the contact as a 10 digit number, have been taken out and put back in network and all our settings are correct according to att. both of us have not had any problems with texting other people - just each other. does anyone know why this is happening and what i can do?

Generally, the failure of a text message is a carrier issue. However, as you have stated, you have worked with the carrier and with Apple, have restored your phone and replaced your SIM. I'm not aware of any other troubleshooting that can be done. The hardest part about troubleshooting the issue is that as you said, it happens randomly.
Is the other phone an iPhone as well? Does the problem exist if you respond to a text, versus creating a new text? Again, since you have already replaced the SIM, had AT&T check your account, and have restored the iPhone as a new phone, I'm not aware of any other fix.

Problem on text autocomplete item

Similar Messages

Maybe you are looking for