Problem printing from LR2 with HPZ3100 in XP.

Lots of issues!
1. Can't get LR2 to colour manage print - keeps defaulting back to printer management as far as I can see.
2. Can't get a printer preview even though I am careful to tick the right box.
3. LR2 throws me out of printer utility (unavailable/off-line) until I restart.
No problem with PS or other apps (unless I visit Lightroom first): always had good screen to print match up to now so v frustrating.
Any help greatly appreciated.

Hi there,
Sorry to hear you are experiencing this issue. I would recommend trying the solutions in the following support document: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02974785&cc=us&dlc=en&lc=en&product=5199463&tmp...
I work for HP.

Similar Messages

Problems printing from PS with an Epson printer in Win2K

There are many folk who are suffering from severe printing problems using the Epson 1270/2000P/870 USB printers.
Symptoms may vary.
The solution was obtained by Bo Wannerberg who posted the solution in the Adobe Photoshop:Windows forum which is as
follows:
The problem you have highlighted with the error "disk error -36 in Photoshop on Windows 2000 running USB on Stylus
products can be resolved in the Windows 2000 printer properties. If you go into the printer properties and select the
Advanced tab. Down in the bottom right hand corner is an option called "Enable advanced printing features". You need
to disable this function and the printer will run correctly
Carol S.
(posted from the UK)

You should also set the Photoshop memory usage to 30% to work around other Win2K problems, until Adobe can release a patch.

Please Help! Problems printing from Leopard with the Lexmark X5470!

Hi,
I have just installed Leopard, but the Lexmark X5470 printer I already had has stopped printing!? It will scan and clean the heads, but what ever i try i cannot get it to print???
I looked around the internet for a solution, and I found out that you could install the needed drivers from the Leopard installation disk. But after trying this it still would not print??
Please can someone let me know how i can get this to work?
Thanks in advance

Few questions for you:
1) Is the Snow Leopard disc gray?
2) How much RAM is in your computer?
3) How much free space is on the hard drive?
~Lyssa

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

Dear Sir or Madam:
I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
I have a HP Officejet 6500 E709n Series printer.
I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
Are there any software updates to correct this problem?
Please reply back soon.
Thanks.
Sincerely,
Etow

Welcome to the forums Etow,
I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
If the above does not help, try using Firefox or Internet Explorer to print.
Have a great Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problems printing from iPhoto 6: Page setup & Preview

I am having trouble printing from iPhoto v6. For starters, the miniture preview frame in the print screen does not conform to the paper size selection or image orientation. (It is always a big square.) Only part of a 4x6 image image is seen in the frame. This makes predicting the final result impossible. To make matters harder, the print dialog does not remember what paper size was last used and many internal "Advanced" options reset the paper size to "letter". Simple choosing any printer preset resets the paper size. Switching from advanced options to the iPhoto options seems to alter other selected options as wlll.
I have the most current driver for my printer. I have no problem printing from Aperture or Photoshop. I have custom color profiles and am not entirely a novice, but I am wasting much paper and ink and spraying the inside of my printer!
The use of the native iPhoto print routines seems mutually exclusive with using Advanced options. I understood that the first iterations of iPhoto wanted us to depend on the Mac Print routines, and it was always a little touchy but I would have hoped earlier problems would have been sorted out by now. I want to print my own pictures!
Much confusion and no place to find good instructions. For example, should I be using "Full Page" or "Standard Prints" Standard settings in the print interface? There appear to be several places to select print sizes but they do not seem linked together nor is it obvious which one is determinitive. Under color options do I select Color Corrections <none> or <Colorsync> which then forces me to use driver recommended by Canon despite the fact I have a custom profile identified in Color sync utility. It just isn't working for me.
Are others notiing that iPhoto print routines are no longer working for them? I would like to see the internal print routines working intuitively before additional efforts are made to facilitate purchase from outside printing sources!
G5 2G Dual PowerMac 2yr old. Mac OS X (10.4.4) Canon i950 printer

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems printing from a Macbook Pro on a Kodak ESP7

Hi,
I am having problem printing from my Mac to the Kodak. I have connected the mac to the printer through the settings as it can see it. However, when I come to print it it says the printer is not responding and to check if it is turned on and properly connected. I have tried reloading the printer etc but still cant get it to work. I fired up my old windows laptop and that will print fine wirelessly so it can't be my BT Hub for the internet.
Any suggestions would be appreciated as I dont want to go and have to buy another printer.
Thanks for suggestions.
Matt

Using the OS X built-in network printing protocols
requires a CUPS driver. Check on Brother's site to
see if they now have a CUPS driver for your model,
or you can try the open source hl1250 driver from:
http://www.linuxprinting.org/macosx/hl1250/
Unfortunately, I don't have an Intel Mac, so I don't
know if any of these power PC drivers will work for
you.
Please let us know.
I was told by a friend that the drivers are already built into the OS X 10.4.3, I hooked up the printer directly via USB and indeed it worked just fine. But, as I stated before, I just can't get the **** thing to work when the printer is connected to my PC and I try to print through the network.

Problems Printing from Epson 2400 in Lightroom 2.3

I'm in the process of switching over from a PC to a Mac. I've gotten lightroom running and transfered all my photos over. But I'm having two big problems printing from my Epson 2400.
*8.5x11 prints are offset. The top of the picture starts about an inch lower than it should, and the bottom typically gets cut off.
*Lightroom refuses to print 4x6 prints. It says it's printing, and the paper feeds in, but then the printer just spits out a blank page.
I'm using the most current version of the Epson 2400 driver that I could find on the Epson web site.
[Update] I used iPhoto 9 to print out some pictures, and they came out fine. So this seems to be a lightroom issue or a conflict between the lightroom/epson drivers.
Any help would be greatly appreciated.
Thanks!

Further update. It appears that I can print perfectly from another account on the same mac. But the account on which my catalog resides doesn't work at all. Could my catalog have been corrupted when I transfered my photos and catalog over to the new mac from the pc? Is there any way that I can fix it? (I have tried optimize and relaunch; no luck.)
I could -- as a last restort -- kill the catalog and reimport all my thousands of photos, but wouldn't I loose the keywords and adjustments?
Any help would be greatly appreciated!

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

Try checking thru these, maybe some help.
Mac OS X: How to reset the printing system
http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

Problems printing from Adobe 9

Hi, I am having problems printing from Adobe 9. I can open documents OK but when I try to print them it takes me through the normal print screens, then when I press print it says unable to print document followed by page not selected.
I have also try to delete Adobe 9 and reinstall but when I come to reinstall, I have to click on the grey box at the top of my screen to agree to allow the instillation to take place and everything just freezes up and I have to ctr alt del to move on.
Everything was working fine until the last couple of days
Any help would be much appreciated

My problem is the printing will eventually happen but I have to wait for as long as half an hour. What gives? Are there worms in the Acrobat 9 product? How can I resolve this problem?

Problem printing from Adobe Reader .pdf with Brother printer from a Mac

I have a macbook pro with Intel Core i7 and OS X Yosemite and Brother MFC-7360N printer connected by wifi. My problem is that I can print everything from all programs except from the Adobe Reader .pdf that do I print from my Preview files .. The error I get is "Error filter". Does anyone know where can originate the error and how to fix it?

With another O.S. in another computer is OK.
Thank you
Juan Carlos Rubio Perez
[email protected]
Este mensaje y los ficheros adjuntos pueden contener información confidencial. Los mismos contienen información reservada que no puede ser difundida. Si usted ha recibido este correo por error, tenga la amabilidad de eliminarlo de su sistema y avisar al remitente mediante reenvío a su dirección electrónica; no deberá copiar el mensaje ni divulgar su contenido a ninguna persona.

HT3500 Problem printing from MacBook Air with Mountain Lion to HP Photosmart Premium C310a Printer

My HP Photosmart Premium C310a printer used to work fine with my MacBook Pro printer running Lion. I bought a new MacBook Air that comes of course with Mountain Lion. I added a new printer from the System Preferences. The printer will print sometimes. Sometimes the printer just restarts itself and then will print. I used to have an excellent HP Scan Utitlity. That is now gone and it is really hard to scan anything. I am beginning to think it is time to get rid of the HP Printer and buy another one that fully supports Mountain Lion. Can anyone help me here?

Hi - if you haven't done this already, HP support lists several download options including software for OS X for your printer - I would try that route since what comes with Mountain Lion doesn't seem to work - let me know how you make out

WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

Hi, Jordan -
Welcome to Apple's Discussions.
If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

Problem printing from LR2 with HPZ3100 in XP.

Similar Messages

Maybe you are looking for