Problem: sort and RSUM
Hi,
I have a report in answer, which is combined by 3 single reports and ordered by the date. Also I have a running sum.
With the sort the reports looking similiar to this:
DATE | QTY | RSUM_QTY
01.01.08 | 100 | 100
02.01.08 | 100 | 200
03.01.08 | 100 | 300
03.01.08 | 200 | 300
04.01.08 | 100 | 400
04.01.08 | 200 | 400
04.01.08 | 300 | 400
06.01.08 | 100 | 500
You can see that there's something wrong with the RSUM. Because if it's the same date, the SUM is always the same.
If I have no sort, the report looks like this:
DATE | QTY | RSUM_QTY
03.01.08 | 200 | 200
01.01.08 | 100 | 300
02.01.08 | 100 | 400
03.01.08 | 100 | 500
04.01.08 | 100 | 600
04.01.08 | 200 | 800
06.01.08 | 100 | 900
04.01.08 | 300 | 1200
And that's what I expected ... My funtion for RSUM is added in the result column with the following function: RSUM(saw_2).
So I need the report to be ordered by date, is there anyway to get the RSUM function working correctly?
Thanks
chrissy
I can't duplicate your conditions, so what I suggest may be just a work around. I can think of a couple of thing you can try:
1) Don't sort the column. Instead, keep your report in Table View (if it isn't already) and enable Column Sorting from the Properties of Table View. Then in the Results sort on the Date column.
2) Add a column that would make each row distinct even if the dates and measures total are the same, place it before the date column and hide it. Then apply the sort to the date column.
Tell me if either works for you.
Similar Messages
-
I was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.
I remembered the answers to my questions, I just forgot "EXACTLY" how I entered the text - so I had to have them reset. The easiest way is to sign in through www.appleid.com. Then on the right click the "Manage your Account" link and sign in. Easy so far right. Then, as others have said, look on the left of the screen you will see a link called "Password and Security" - click on this. Now this is where the confusion begins. Some people have a link located directly under the existing questions that looks like this "Forgot your answers? Send reset security info email to blah blah blah email . If you see this click it and it will send an email to the "Rescue Email" address that you entered when you originally entered your answers. Follow the instructions contained in this email and you are done. If you cannot remember this email address or you have since closed it, you will need to go to the Itunes Express lane and send an email to Apple requesting them to reset your answers.
HOWEVER IF YOU DO NOT SEE A THIS LINK UNDER THE QUESTIONS - this means that you DID NOT enter a Rescue email address when you originally set your questions. The only way you can now reset your Security Questions and Answers is to go to the Itunes Express lane and email Apple asking to have these reset. I have 2 apple accounts, one for myself and one for my daughter - as I did not include a rescue email I had to email apple. On both occasions, these questions were reset and an email sent to me exactly 24 hours after I sent them the request. I entered the new details, WROTE THEM DOWN EXACTLY AS I ENTERED THEM THIS TIME, entered a Rescue Email this time and I am good to go again. Simple. Now when I log in and click on "Password and Security" I do have the reset link visable. Apple support are good, they just take a bit of time to get things done, but they always seem to get there in the end. I just wish someone had taken the time to explain this somewhere else in the forum as it would have saved me much time and angst.
To get to the Itunes Express Lane go to this website www.appleid.com make sure the correct country is displayed top right, if not change it. Once this is saved go to the tabs at the top of the screen and click Support. Then halfway down the next page you will see a photo of two random people with a title of Contact Apple Support - Click this. Scroll down until you see the itunes logo, to the right of this you will see the link Express Lane for iTunes Player and iTunes Store - click on this. One the right hand side of the next page click on the link "itunes Store". On the next page click the link "Account Management" check the radio button beside "itunes store account security", select your country from the drop down box and click "Continue". Under the heading MORE OPTIONS, you will see a clickable link called email - click this. Fill in your name, Apple ID and country. Then in the text box, write "I have forgotten the answers to my Security questions, would you kindly please reset them. Thank-You". Then Click Continue, you will be given a reference number and an email is sent to your address advising that generally someone will attend to your request within 24 hours. Like I said previously, I had to do this twice and both times it was reset however it was done within about 5 minutes of the 24 hour cut off, so you will have to be patient. I know 100% that this works for Australia - I am guessing other countries should be similar. Hope this helps someone somewhere!Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
Problem with 'sort and filter' feature of embed codes in Excel Online Web App
So my question has to do with the Excel Online feature where you can share a spreadsheet and embed it in a website with the option of allowing users to sort and filter the data. (The option is under the "Interaction" heading.)
One of the options if you look closely is "Let people sort and filter" which is not checked off. In the embed code you can see "AllowInteractivity=False". The problem is that when I check "Let people sort and filter"
the embed code changes completely - going from:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&wdAllowInteractivity=False&Item='Sheet1'!A1%3AI32"></iframe>
to:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&Item='Sheet1'!A1%3AI32"></iframe>
If I manually change 'false' to 'true' that doesn't do the trick so I'm not sure what to try next.
Any thoughts?Hi,
We support Office for Windows in the current forum, since this question is about Office Online, I suggest you post the question in Office Online forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Problem sorting list with virtual layout = false (and also with true)
Hi,
I've a problem sorting a list... or better... I've a problem showing the sorted list ;-)
I've a list of xml item. The list is shown with an item renderer.
my needs: a button to refresh data and a button to sort data.
useVirtualLayout = false
-> refresh works correctly, sort does not affect the view (even if the list is sorted correctly when printed with trace)
useVirtualLayout = true
-> sort works correctly, refresh reverse the list each time I press it (even if the list remain the same when printed with trace)
does any one have an idea?
thank you!!
MXML
<s:List dataProvider="{xmlListCollection}" width="100%" itemRenderer="myRenderer" minHeight="0" id="test" useVirtualLayout="false" >
<s:layout>
<s:VerticalLayout clipAndEnableScrolling="true"/>
</s:layout>
</s:List>
XML example
<unit sortField1="First Floor" sortField2="7">
<employee>
<id>3040684</id>
<name>PIFFARETTI Vasco</name>
<birthdate>20.05.1983</birthdate>
<beginDate>2012-02-25 08:55:00</beginDate>
<endDate>9999-12-31 00:00:00</endDate>
<annotation/>
</employee>
</unit>You can tell when the scroll position has changed by handling the propertyChange event coming from the DataGroup:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
creationComplete="list1.dataGroup.addEventListener('propertyChange', handle)">
<fx:Script>
<![CDATA[
import mx.events.PropertyChangeEvent;
private function handle(e:PropertyChangeEvent):void {
if (e.property == 'verticalScrollPosition'){
trace('vsp changed');
if (e.property == 'horizontalScrollPosition'){
trace('hsp changed');
]]>
</fx:Script>
<s:List id="list1" width="100" height="50">
<s:layout>
<s:VerticalLayout />
</s:layout>
<s:dataProvider>
<s:ArrayList>
<fx:String>0</fx:String>
<fx:String>1</fx:String>
<fx:String>2</fx:String>
<fx:String>3</fx:String>
<fx:String>4</fx:String>
<fx:String>5</fx:String>
<fx:String>6</fx:String>
<fx:String>7</fx:String>
</s:ArrayList>
</s:dataProvider>
</s:List>
</s:Application>
You might also want to read and consider voting for http://bugs.adobe.com/jira/browse/SDK-21357 -
Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn’t work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?
Did you recently updated to 7.0.4? Even for me same also issues.
-
Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Problem with sorting and filtering of table
Hello,
using VC 7.1 SP5 I have created [this|http://img232.imageshack.us/img232/2460/screenshotsr0.png] model. The webservice returns a collection of structured elements. The table is meant to display values of top-level attributes. This works as expected.
However, the table cannot be sorted or filtered. What is the reason for this? How can I fix that?
I tried to store the result of the web service in a data bridge. That did not succeed.
Best regards
AlexanderHi Natty,
How are you trying to sort it?
I want to be able to sort the table by clicking on the table column headers. Furthermore, I want be able to filter the table by using the built-in table feature. However, table sorting and filtering seem to be disabled for this particular table, whereas other tables in my model provide the desired features.
Best regards
Alexander -
Reporting Services Error after Interactive sorting and drill down in pps
Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?
Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support -
Using member sorting and grouping with two reports sharing rows
Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT MATERIAL AMOUNT
TOTAL PROD_A-X 100
PROD_A_A MAT1 22
PROD_A_B MAT1 50
PROD_A_A MAT2 28
TOTAL PROD_B-X 120
PROD_B_A MAT1 30
PROD_B_A MAT2 50
PROD_B_B MAT2 40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very muchHi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT MATERIAL AMOUNT
TOTAL PROD_A-X 100
PROD_A_A MAT1 22
PROD_A_B MAT1 50
PROD_A_A MAT2 28
TOTAL PROD_B-X 120
PROD_B_A MAT1 30
PROD_B_A MAT2 50
PROD_B_B MAT2 40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much -
Slow Speeds ages to sort and I'm down 4 days holid...
Hi,
First time I've posted on a forum.
I've had real trouble from the start with BT, ordered Infinity in November 2012, but wasn't installed until December, with me having to take 2 separate days holiday as the first engineer could only fit the the phone line, and the second had to install the broadband. January 2013 after a few teething problems the BT infinity was excellent 75mb download and 19MB upload........Then I used the phone, that's when problems started, and to cut a very long story short, and after 4 visits by engineers, again me having to use my holiday days and unpaid days it was sorted, but I had a whole month where the speed was half what it was supposed to be, with BT customer service telling me how to do speed tests etc etc, fobbing me off. Bearing in mind that they only sorted me out when I cancelled my direct debit, as I wasn't going to pay for a service I wasn't getting.
I emailed BT on 12th July and 15th July (130712-001629 and 130715-007822) no response. Today I contacted them through the online chat, and was cut off not by one but by 3 representatives before they could even help me or me advise the problem. Rudradeep Saha, Mruntunjoy, Junaid, and then finally MD Shahnawaz Akhtar who told me he couldn't help me online.
My main thing is this, yes the BT infinity speed is now perfect, no problem, but I requested that at the very least a month's payment be credited for all the trouble and MY time I have wasted due to a fault that isn't mine.
I've cancelled the Direct Debit and this should speed up contacting me, as it seems to be the only way for BT to actually do something for me.cancelling a direct debit will only lead to one thing suspension of service and it eventual cancellation of service
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3/5 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!
Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.
-
Sorting and Searching String (Please help me)
Hi, Could somn please be of any help here. I am trying to sort this string in alphabetical order and then search for data available but I am not makingprogress with the code. Does anyone have any advise or better still the code to solve this problem... This is hat I have at the moment
import java.util.*;
import java.io.PrintStream;
import java.io.File;
import java.io.FileNotFoundException;
public class coursework2
public static final int MAX_RECORDS = 20;
public static String lastName[] = new String[MAX_RECORDS];
public static String firstName[] = new String[MAX_RECORDS];
public static String telNumber[] = new String[MAX_RECORDS];
public static String emailAddress[] = new String[MAX_RECORDS];
public static int read_in_file(String file_name)
Scanner read_in;
Scanner line;
int record_count = 0;
String record;
try
read_in = new Scanner(new File(file_name));
// read in one line at a time
read_in.useDelimiter(System.getProperty("line.separator"));
while (read_in.hasNext())
// Test to see if there are too many records in the file
if (record_count == MAX_RECORDS)
System.out.printf("Only %d records allowed in file", MAX_RECORDS);
System.exit(0);
// read in record
record = new String(read_in.next());
// Split the record up into its fields and store in
// appropriate arrays
line = new Scanner(record);
line.useDelimiter("\\s*,,\\s*");
lastName[record_count] = line.next();
firstName[record_count] = line.next();
telNumber[record_count] = line.next();
emailAddress[record_count] = line.next();
// Increment record count
record_count++;
catch (FileNotFoundException e)
e.printStackTrace();
return record_count;
public static void write_out_file(int no_of_records, String filename)
PrintStream write_out;
int counter;
try
// Create new file
write_out = new PrintStream(new File(filename));
// Output all reacords
for(counter = 0; counter < no_of_records; counter++)
// Output a record
write_out.print(lastName[counter]);
write_out.print(",,");
write_out.print(firstName[counter]);
write_out.print(",,");
write_out.print(telNumber[counter]);
write_out.print(",,");
write_out.println(emailAddress[counter]);
// Close file
write_out.close();
catch (FileNotFoundException e)
e.printStackTrace();
// Your 'functions' go here
//This code sorts out the record after loaded into alphabetical order using
//the selection sort method
public static void sort()
// Your 'main' code goes here
//The code below uses a binary search method to search for record because
//record have been sorted and this would make search faster and more efficient
public static boolean linearSearch(String strFirstName, String strLastName)
//Set-up data_input and declare variables
//This linear search searches for record in the contact application.
//Search for a record using surname only
int i = 0;
boolean found = false;
while (!found && i < lastName.length)
if(strFirstName.equals("") && strLastName.equals(""))
return true;
if(lastName.equalsIgnoreCase(strLastName)){
//List records from surname only
System.out.println("Enter your search criteria (last name only):");
System.out.print(lastName[i] + "\t" + firstName[i] + "\t" + telNumber[i] +"\t" + emailAddress[i]);
System.out.println("");
if (lastName[i].compareTo(strLastName) == 0)
//Compare the last name values and type to make sure they are same.
found = true;
i++;
System.out.print(lastName[i] + "\t" + firstName[i] + "\t" + telNumber[i] +"\t" + emailAddress[i]);
System.out.println("");
return found;
//Search for a record using first name only
public static void main(String[] args)
// Set-up data input
Scanner data_input = new Scanner(System.in);
// Declare Variables
int number_of_records;
String filename;
int counter;
// Get filename and read in file
System.out.print("Enter the masterfile file name: ");
filename = data_input.next();
number_of_records = read_in_file("data2.dat");
//Get new filename and write out the file
System.out.print("Enter new masterfile file name: ");
filename = data_input.next();
//System.out.println("Enter your search criteria (first or last name):");
linearSearch("*", "");
Am very sorry this is long, the file should be sorted after it is loaded and I have that, You can make up some data with last ane, first name, tel and email to show me an example. Thanks alot
JosephHi Monica, Thanks for you patience with me.
I have tried writing a selection sort method but am having some errors. Could you kindly have a lookand correct me please.
This is the code i wrote
public static void selectionSort(Comparable [] data)
String strFirstName;
String strLastName;
Comparable temp;
for(int i = 0; i < lastName.length; i++)
lastName = index;
for (int j = i; j < lastName.length; j++)
if (lastName[j].compareTo(lastName) < 0)
lastName[j] = lastName[i];
//Swap the string values
temp = lastName[j];
lastName[j] = lastName[i];
lastName[i] = temp;
As you requested, below are 4 error messages I had
E:\coursework2.java:101: cannot find symbol
symbol : variable index
location: class coursework2
lastName = index;
^
E:\coursework2.java:107: cannot find symbol
symbol : variable j
location: class coursework2
temp = lastName[j];
^
E:\coursework2.java:108: cannot find symbol
symbol : variable j
location: class coursework2
lastName[j] = lastName[i];
^
E:\coursework2.java:109: incompatible types
found : java.lang.Comparable
required: java.lang.String
lastName[i] = temp;
^
4 errors
JCompiler done.
JCompiler ready.
Joseph -
Line graph date sorting and formatting
Hi Gurus
We've recently upgraded to 11.1.1.7 and noticed that our Publisher line charts with date on the x-axis are no longer sorting correctly i.e. May comes before March. The reason for this is because in <11.1.1.7 we have a formatted date mask (to_char) in our data model but sorted by the underlying canonical date which worked. Now in 11.1.1.7 it is no longer sorting by the data model sort but by the formatted date string therefore numeric values of 30 April sorted after 1 May.
We have tried a number of options to resolve:
1. using the canonical date and sorting on that corrects the sort problem but the default formatting used in long YYYY-MM-DDT00:00:00-00:00 and not readable as our chart is showing daily totals. Changing to time-series chart can allow you to format the date but see problem 2 next...
2. Time series = yes doesn't display the chart if we have a number of entities in our series i.e. multiple lines and the interactive viewer shows a red error icon. I think this may be due to the fact that our date range is not continuous ie we have a sparse data set.
3. Workaround we used was a bar chart (our users preference is line charts) with time series = false but the date format is still long.
Any advice / suggestions would be helpful.
Thanks
Nick.for #1: numbers does what is called a "stable" sort. Meaning that the previous sort order is preserved. i.e. do your sort in reverse order. Amount, then name, then date. Just did it with sample data and it was perfect. It keeps them in the original order, so if there is a match in name after you sort, you should see the amount still in the proper order.
#2: What in your formula isnt working? I just made a formula that did math on the columns to the left, sorted and it worked. Sorted by static data columns and the formula column. I know it was broken originally, years ago, but it seems to be working correctly now, at least in my quick test. You might have an issue if you are using formulas that refer to data on other rows or tables.
#3: yeah formatting can be a pain. But it is easier to do in the desktop program. No, you cannot get it for windows, sorry. If the formatting the only thing you need to do on the desktop side, then i dont see much tying you to it. I do 90% or more on the ipad and iphone now.
Jason -
Problem sorting data in a file?
I have a problem sorting this file alphabetically by second name. Basically, my method sorts each column alphabetically but i would like to sort the file according to the second name. I really really need help. Thanks
File:
Moe Carl
Saul Sergio
Rocky Louis
Ike Ziken
This is how my method sorts the file:
Ike Carl
Moe Louis
Rocky Sergio
Saul ziken
Instead
Moe Carl
Rocky Louis
Saul Sergio
Ike Ziken
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
class thedata implements Comparable
private String firstname;
private String secondname;
public void setFirstname(String firstname)
this.firstname = firstname;
public String getFirstname()
return firstname;
public void setSecondname(String secondname)
this.secondname = secondname;
public String getSecondname()
return secondname;
public int compareTo(Object Student) throws ClassCastException
if (!(Student instanceof ShowData))
throw new ClassCastException("Error");
String sn = ((ShowData) Student).getSecondname();
return this.secondname.compareTo(sn);
public class sort {
public static void main(String[] args) {
sortmethod();
public static void sortmethod(){
int j = 0;
thedata data[] = new thedata[4];
try
FileInputStream fstream = new FileInputStream("datafile.txt");
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String line;
String[] firstname = new String[4];
String[] secondname = new String[4];
ArrayList<String> list = new ArrayList<String>();
while ((line = br.readLine()) != null)
list.add(line);
Iterator<String> itr = list.iterator();
int k = 0;
for (itr = list.iterator(); itr.hasNext();)
String str = itr.next().toString();
String[] splitSt = str.split("\t");
for (int i = 0; i < splitSt.length; i++)
firstname[k] = splitSt[0];
secondname[k] = splitSt[1];
k++;
arraysort(firstname);
arraysort(secondname);
for(j = 0;j < 4;j++)
data[j] = new thedata();
data[j].setFirstname(firstname[j]);
data[j].setSecondname(secondname[j]);
for (int i = 0; i < 4; i++)
thedata show = data;
String firstname1 = show.getFirstname();
String secondname1 = show.getSecondname();
System.out.println(firstname1 + "\t\t" + secondname1);
catch (Exception e)
private static void arraysort(String[] array)
for(int i=0; i<array.length; i++)
for(int j=0; j<array.length-1-i; j++)
if(array[j].compareTo(array[j+1])>0)
String temp1 ="";
temp1= array[j];
array[j] = array[j+1];
array[j+1] = temp1;
Edited by: 999363 on Apr 11, 2013 3:41 AMYou're not sorting your objects, you're only sorting the firstname and secondname arrays separately, so they get scrambled. Sort the array of `thedata` objects.
BTW this:
public int compareTo(Object Student) throws ClassCastException
if (!(Student instanceof ShowData))
throw new ClassCastException("Error");
String sn = ((ShowData) Student).getSecondname();
}contains a complete waste of time. You should just remove 'throws ClassCastException' and the first two lines of the method. The test and throw happens anyway at the cast. If Student isn't an instance of ShowData the cast will fail with the same exception (and a much better error message). -
Retrieving sort and filter criteria for interactive report
I have developed a test management system in APEX. Users log in and see an interactive report with their assignments. Each test they've been assigned occupies one row.
There is an "Execute" link for each row that takes the user to the test execution page, where they can see the input steps / expected results and report the test passing or failing.
I've implemented "Next >" and "< Previous" buttons on the execution page, so the user can immediately go forwards or backwards in his assigned tests without having to return to the assignments page and click the Execute link on the next or previous row.
The test execution page figures out what the next and previous assigned test is using the LAG and LEAD functions, like this:
lag(assignment_id) over (order by ref_num_full) prev_id,
lead(assignment_id) over (order by ref_num_full) next_id
Notice that I've "hardcoded" the over clause to be the reference number of the test.
The problem here - this solution ignores any custom sorts or filters the user has put in place on the assignments (interactive) report.
Is there a way I can "grab" the interactive report (1) sort criteria and (2) filter criteria dynamically? I'm thinking I could then use dynamic SQL to build an OVER clause used in the lag/lead calls so that the application now follows whatever sort and/or filter criteria the user has put in place.
Any help is greatly appreciated...thanks!!Thanks WTine!
I took a look and determined
- I can get the sort criteria from the APEX_APPLICATION_PAGE_IR_RPT view (SORT_COLUMN_# and SORT_DIRECTION_# columns)
- I can get the filter criteria from the APEX_APPLICATION_PAGE_IR_COND view
Regards, Rich
Maybe you are looking for
-
Qosmio G30 - Media center remote control doesn't work in windows
Dear All, I have Qosmio G30-194, first i had a problem with the VGA , i send it for repair, when it comes back i noticed that the remote control is not working on windows Media Center, while in A/V mode it work perfectly. I tried to do full system re
-
Propagation error during upload entitlement process
While applying entitlement we are getting this error queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031360989> <BEA-000000> <The [Upload] operation is halting due to the following failure: Posted content length of 10682519 exce
-
HT5278 How do I update my iPhone 4 to iOS 5 without iTunes?
Please help! When I go to General, there isn't an option for Software Updates.
-
Dear All, I am using my own MenuItemUI to render the disabled foreground for html text present in the Menu Item. So, in my CustomMenuUI, i am overriding the paint() method to obtain the disabled foreground when the Menu Item is disabled. But every th
-
Warranty service needed for my thinkpad keyboard. Who do I call? I have a protection plan.
I have a protection plan from Lenovo. A key broke on the key pad. Thanks Randy Solved! Go to Solution.