Problem starting sqldeveloper over tunnel
Hi there,
I'm getting the following error when I try to define a connection to a database I'm connecting to over a tunnel.
Failure -oracle/i18n/text/converter/CharacterConverterOGS
I know the connectivity is OK, because I can connect just fine using sqlplus and another tool. I don't know for sure that this is related to the tunneling, but I know that I was connecting to another database yesterday through sqldeveloper just fine.
Any ideas?
Thanks in advance.
I have some progress, firs I switched on logging in j2ee-logging.xml file (changed level to TRACE:32):
<logger name='oracle' level='TRACE:32' useParentHandlers='false'>
<handler name='oc4j-handler'/>
<handler name='console-handler'/>
</logger>
After starting oc4j, I see that it blocks when trying to start ascontrol application. So, I disabled it's autostart (in server.xml):
<application name="ascontrol" path="../../home/applications/ascontrol.ear" parent="system" start="false" />
And OC4J started normally - well, without the console. I'm still unable the start ascontrol application (using admin.jar).
Similar Messages
-
I can't start my macbook pro because I turned it off when I got a trojan on my mac. When I turn on my mac I get the message that my computer restarted because of a problem. Then it turns off again and turns on again and it starts all over. What can I do?
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
-
I soundl like I'm in a tunnel when speaking on iphone people say. I've had my Verizon iphone 4s since February and problem started 2d ago. I synced, turned off bluetooth, restarted, recharged. Any suggestions?
Have you by any chance covered the little hole at the top of the phone or is there any dirt in it?
-
I was downloading the trilogy as we speak and out of the sudden the download stops and it says there is an error. I try and resume the download but it starts all over again.
Hi tella7,
If you are having issues downloading purchased content from the iTunes Store, you may find the following article helpful:
Apple Support: Resolve issues between iTunes and security software
http://support.apple.com/kb/TS3125
Regards,
- Brenden -
If I close a window I should be back at the previous window that I was at when I followed a link to this window. At least that's the way Internet Explorer works, which I have used for years. The only thing that prevents me from using Firefox exclusively is that it is very time consuming to have to start all over again from scratch every time I close a window. For instance, say I type "cats" into the search box. It gives me links to a list of "cats" sites. I go to a "cats" website, decide I don't like it so close the window to return to my list of sites, but instead of returning me to the list, I end up at my desktop. Then I have to start all over, just like I had not even been online. Very aggravating. I don't know how else to describe the problem, I can't believe that other people haven't had a similar complaint, unless I just have some settings wrong?
Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available. -
I cannot open project; do I start all over, or is there hope?
So I have started doing video podcasts and am using iMovie '11 for editing the footage.
I exported my first episode which turned out to be around 18 min total. When I watched it to verify, the audio started becoming out of sync with the video. It got progressively worse. Searching these forums and the Internet, I found other users were noticing the same problem. One workaround was to extract the audio from each and every clip. I tried this and it worked. The exported movie had no video/audio sync problems. So I thought that would be my workflow.
Then I started working on my second episode. It turned out to be a long one clocking in at an hour and 45 min. It consisted of some complicated edits and a very large number of separate clips. I started my tedious workflow and workaround of extracting the audio from each and every clip so the exported movie would have video/audio in sync. The process got progressively slower and slower. At some point about halfway through, when I right clicked on an clip to extract the audio, the spinning beach ball came up and iMovie hung. I restarted and tried again, but the same result. When I restarted again, iMovie would not start. I can double click my first episode project and open it, but the second episode will not load; well, it will load sometimes, but if I do anything with it, including just moving the mouse, spinning beach ball and hung. Searching the Internet, I found recommendations to clear the cache and plist. This didn't help any for me. Sometimes, iMovie will hang when I simply select the project in my project library; sometimes, I can select the project and quickly get to the menus. I tried doing this and duplicating the project, but the duplicated project showed the same symptoms.
Unfortunately, I did not keep backups and I don't know why I didn't with such a large project. I've learned my lesson.
Question: Is there any hope of getting the project to a state where I can salvage it? Anyway to reattach the audio outside of iMovie or something?
I also realize now that iMovie is probably not meant for such large, complex projects. But, the video/audio sync issue doesn't seem to be that hard to reproduce. I have submitted feedback for that.
If I decide to continue using iMovie, I am going to add to my workflow that a project cannot be over x minutes long, export the parts, and combine them with Quicktime.
Question: Are there recommended guidelines for a single project's complexity or length?
I am hoping for some answers here; otherwise, I guess I'll have to start all over and spend the next two days re-editing.I have the exact same problem here Jason, only in my case the project is merely 15 mins long...
I noticed the audio sync issues on exported files (needed it as a QT HD to play in front of a whole school assembly) about half way through the audio would go miles out - well over a minute adrift.
Having read some posts I decided to detach the audio as you did, it let me do this for a while then about half way through I got the beach ball and likewise I'm now stuck with an urgent essential project that I can't do anything with. This is on a brand new 27" i7 iMac with all the updates, and no other projects. It's like the dark days of Pinnacle on windows, I thought this stuff was supposed to just work!
Does anyone have any suggestions on a fix - I've repaired permissions, tried trashing the iMovie prefs etc but it still hangs every time. -
I am trying to update software on my macbook pro. From the apple menu, I click "check updates", software is then checked and a list presented of software that I require downloading. I then tick the relevant applications. The blue bar with "install and restart" appears, I press this, the computer goes into restart mode, I login and start all over again.
i seem to be in a loop! No authentical dialogue box appears for me to enter my name and password.
Any suggestions please!Hi, try a refresh that'll bypass the cache with the Shift key + F5 (or Shift-click on reload) which is the same as clearing your browser cache (Ctrl+F5 for the Internet Exploder). If that doesn't work, then you can try a new firefox [https://support.mozilla.com/en-US/kb/Profiles profile] just to see if it's (your) Firefox-related or maybe an actual problem with the site (maybe starting Firefox in [[Safe Mode]] can be a quicker check).
-
only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!! -
my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?
Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
Good luck. -
I haven't set up my game center with my apple id so when i am trying to set it up and get to birth date part it starts all over how do i fix this?
If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.
-
Zen Touch: problems starting, touchpad, new firmw
This is a description, in chronological order, of the issues I have had with the Creative Zen Touch player.
. Bought player, charged exactly as described and player would not get past Zen Touch screen. Tried everything without success, had player swapped by **bleep** Smith.
2. WMA and data files added to new player without any problems. Players seems to work well.
3. More files added, but I started receiving an error when trying to copy files to the player from the computer. It seems that the player requires significant power to talk to the computer, this problem was more prevalent on a computer with USB .. A full battery charge will work but this will be drained quickly, so the best bet is to plug the player into the mains while it is docked with the computer. This should be added to the manual.
4. Player seems to work well from that time till the past week.
5. Installed newest firmware a week or more ago.
6. During the past week there was one day when the touchpad would not work properly. This problem was that moving between items becamse very cumbersome. I would move to a selection, but when I lifted my finger, the selection would jump two places lower. If I just touched the touchpad, the selection would jump two places lower. This problem rectified itself a day later.
7. Tried to start player as per normal but it would not start. Used reset buton, player started and had at least two thirds of battery (ie I guess that the problem starting was not battery related).
8. The next day, the same problem occurs, but reset would not work. Tried many means of starting player, until plugging into mains. Player starts and shuts down as per normal within a short period of time. Waiting significantly longer and the problem starting the player will arise.
9. Went to special menu on player and cleaned up player then rebooted. Player seems to work.
0. Next day player will not start. Tried pressing and holding down the start button for a long time, pressing many times in a short period, using reset button, using reset with play/pause button. Eventually tried mains, which brought the Creative logo onto the screen with no backlight, player did not even try to charge itself (ie flashing led on start/shutdown switch). I left player plugged into the mains and came back to find it charging. After this, the player started.
. Later in the day, I tried unsuccesfully to start player without success, using all possible tricks as mentioned. Went to inspect player a while later and it had was playing.
2. Now I have found that if I do not actually perform a shutdown and the player switches itself off using the idle settings, it will start up more easily, but not the first time. It seems that the touchpad problem (read above) has returned, but not as bad as before, in conjunction with the player being slightly easier to start (up to 5 attempts at pressing start).
Theories:
- When player is shut down it stays in a quick start mode for a period of time. During this time, if player is started, it will quickly start up and begin playing. After this time, a procedure automatically changes so that a more full startup is required during the next start-up, eg parking hard dri've or something else.
- When a player is shutdown from idle, a different shutdown happens, allowing easier startup later.
- The player in question is having difficulty starting from this second mode.
- Start/Stop button not jammed or working. Unlikely because I can shut down using the button
- Player not receiving startup message. Possible, but unlikely because reset does not work and theory .
- Battery not strong enough to perform initial startup? Feasible option given that the only time the player could start was when plugged into mains. However, player does have 2/3 of life left, which does not make any sense, unless the battery indicator is faulty. Fully charging the battery did not make a difference. Thus, max output of battery may have diminished.
- Hard dri've faulty. I am not hearing any hard dri've sounds when attempting a startup, so this is unlikely, since once player is started, everything works.
- New firmware is problematic. Explains sudden change in player's working. However, when I went to downgrade the firmware it said that the files may be corrupted by going back a version, yet to test.
- New firmware requires a hard disk format to work properly. Was this fully tested by Creative before release? Ie, did they put 0 gig of music on a Touch, then upgrade the firmware and see if the player continues to work correctly for a reasonable period?
- Player is a first time release with unironed bugs trying to capture the overflow from iPod, and we are the testers.
To Creative,
I am reasonably upset by this turn of events. I chose the Creative player over the iPod because of the battery life, reported music quality, ability to play more formats and the added storage. However, I would prefer a more durable player to what I appear to have in my possession. I believe I have given a reasonable description of the player and its problems, which should assist, unless the problem is already known. Please advise me of my options Creative.Slats325 wrote:
Number 6 has turned out to be my electronic albatross. I have attempted every concept that I have read on this board: wiped down the keypad with a towel, damp cloth, bought a plastic case in an attempt to ward off static electricity, reset the unit, cleaned up the hard dri've, etc.. The fact remains that the unit jumps when it wants to. Very disconcerting. I have decided that since Creative is well aware of the issue and is maintaining corporate silence, that I should just cut my losses and buy an iPod. Tested one at an Apple store last night and was impressed with the control and functionality of their click wheel. It is a real shame as I truly think this Zen Touch was a cool idea but has consistently lacked support and follow up by Creative.
Haha remember that poem...rhyme of the ancient mariner...good to see other cultured fellows...
anyways I too have been haveing the jump problem. I've gotten somewhat accustomed to it, but I simply can't wish I had an iPod....its control is so much better. My friend said that this was how the iPod was at first, but then it got better. Now whether this was a software problem (I hope so) or an actual hardware issue (I'm going to be ticked if they don't replace it), I don't know. They better rectify it.
I wrote them a huge, uber persuasi've, rhetorically packed essay about why they must fix this problem if they wish to ever be on the same playing field as apple.
and I never got a reply.
so we'll see what happens. they better fix it. -
i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help
You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I synced about 50 books to my new ipad air 2. When I click any other books, the sync starts all over again for all books (it shows 51 books syncing). If I abort the sync, all of a sudden, all books are gone from my ipad. I don't know why. I did not have this problem on my old ipad...or before I upgraded to the latest version of iTunes. Any help would be greatly appreciated.
Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on. -
In Yahoo Mail, when composing an email I get an "Asking to leave this page" panel; it does not matter whether i choose stay or leave, the panel pops up again....and again...the only way out is to Force Quite Firefox and start all over...help please...
Thanks for responding....but isn't your potential solution designed for Windows users? I have a Mac.
If it does apply to Mac, I am also hoping for something simpler as this could take weeks to isolate the problem and it would be more efficient to use another browser for mail
Also, I should have added, this problem occurs only occasionally and seemingly only when I am taking some time to compose a message -
How can I get Apple to recognize me? Every time I try to put in my Apple password, it doesn't recognize it. I try answering the security question, will not recognize it. I end up changing the password then try signing in again and it won't recognize it. We start all over again.
Have you changed the email address associated with the Apple ID? I did, and learned the hard way that it caused a lot of problems. I had to delete that ID and create a new one, then it caused problems with iCloud because of my old email address. If that's not the case, you might need to set up a new Apple ID altogether. Sounds like a pain, but it's not too hard, and you only need to create a new email address. You can also set up new security questions for the new ID and it should be recognized when you enter the information in iTunes, the App Store, etc. If that doesn't work, I recommend calling Apple and explaining the situation. Here's the page for Apple support numbers depending on where you live:
http://support.apple.com/kb/he57
Hope this helps.
Maybe you are looking for
-
Why is so slow filtering links in a website source code?
I was using Automator extracting links from a webpage, and then i pasted them in a textedit document. I thought it would be better doing it by applescripting, but it's sooooo slow; to grab and filter all the links in a website source code lasts about
-
Hey Guys, I recently purchased an iPad mini (wifi+cellular) from an online portal in the UAE to be used in India. One of my friends in Dubai received it yesterday (July 10) from the portal. When she opened the box, she realised that a Verizon sim car
-
Wireless keyboards and non apple devices
Is there any way to pair an apple wireless keyboard to another bluetooth device. The device i am using recognizes the keyboard, but when it asks for a passcode i am stumped. I tried using the passcode generated by the mac i have, but it is clear afte
-
Mobility Anchor and AAA Overide VLAN Assignment
Hello, I read some document 2 years ago that dynamic VLAN assignment was not possible with Anchored WLANs. Please I would like to know if this is now possible. The network setup would be as follows: 1. Foreign and Anchor WLC (5508) with single SSID f
-
About Transparent Tables and Views..
Greetings SAP Gurus... How does one differentiate between Tables, Views (are they the same as table views) and logical views? What are the differences, if ever? Why is it better to create a view rather that create a table? Cheers! Philips