Problem to invite participant with special e-mail adress

Hello,
I have a problem with Ical.
I can't invite a special e-mail-adress like [email protected]
When I send an e-mail with mac.mail at this adress I get the message: [email protected] ist keine gültige E-Mail-Adresse. Überprüfen Sie die E-Mail-Adresse und versuchen Sie es erneut. - in english: it's noch a valid e-mail adress. Please check the adresse and try again, but I can send it. In mac Ical it just disapears after I press enter after tipping the adress in the invitation list.
thx.

http://www.oracle.com/technetwork/java/javamail/faq/index.html#encodefilename

Similar Messages

Siri - Invite Contact with Multiple E-Mail Address to Meeting = No Invitation

Hi
Wondering if anyone else notices this weird behaviour of Siri when trying to invite a person to a meeting. I know Siri is in Beta but maybe this could help to improve its functionality.
Scenario
- Schedule a Meeting using Siri and inviting a person to that meeting (i.e send out invitation to that person)
- Person Contact in Addressbook has more than 1 e-mail address (like business and private)
Outcome
When trying to schedule a meeting and inviting a contact to that meeting, Siri will ask you what e-mail address shall be used. However, when the meeting has been added to your calendar, the invitee/attendee does not appear in the calendar entry and therefore never receives a notification.
How it should work
When doing the exact same thing with a contact that has only 1 e-mail address in their contact details, Siri correctly adds the person as an invitee and sends out the invitation to that e-mail address.
This is very annoying as I'm guessing lots of people have contacts in their addressbook with their business and private e-mail address.
Can anyone confirm this behaviour or is it just me? Any help is highly appreciated!
Addtional info / Stuff I noticed
- I'm synching my Addressbook through Exchange. Unfortunately, although in my e-mail programm offers different form fields for various e-mail addresses (business, private, home, assistant etc) they all show up as "e-mail" on the iPhone. Therefore Siri could not even distinguish which address to chose without tapping on it with the finger.
- Siri seems to be much more unreliable when trying to schedule a meeting with a person having more than 1 e-mail address. In contrast to having just 1 e-mail address in the contact, Siri almost always responds by saying "uh-oh there was a problem.. could you try again".

Please state your problem and we'll try to help you.

Problem to get file with special characters in the message

Hi, I'm developing an application that read the email and save the attached file. However, some files have special characters in the name, like: Documento de EspecificaÇÂO.doc
I noticed the de name of the file in de message head is:
"=?iso-8859-1?Q?Documento_de_Especifica=E7=E3o.doc?="
I'm already using the JavaMil 1.4.5
Tha is my code:
package br.com.cesan.helpdesk;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.util.Properties;
import javax.mail.Flags;
import javax.mail.Folder;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.Part;
import javax.mail.Session;
import javax.mail.Store;
import javax.mail.search.FlagTerm;
public class LerEmail2 {
     * @param args
     * @throws MessagingException
     * @throws IOException
     public static void main(String[] args) throws MessagingException, IOException {
          // TODO Auto-generated method stub
          // Get session
     Session session = Session.getInstance(new Properties(), null);
     // Get the store
     Store store = session.getStore("pop3");
     store.connect("pop.xxxxx.com.br", "user", "password");
     Folder folder = store.getFolder("INBOX");
          //folder.open(Folder.READ_ONLY);
          folder.open(Folder.READ_WRITE);
          // Show only unreaded Messages
          FlagTerm ft = new FlagTerm(new Flags(Flags.Flag.SEEN), false);
          // Get directory
     Message message[] = folder.getMessages();
     //Message messages[] = folder.search(ft);
     for (int i=0, n=message.length; i<n; i++) {
          System.out.println(i + " - "+ message.getSubject() +" - " + message[i].getSentDate() );
          Object content = message[i].getContent();
          if (content instanceof Multipart) {
     handleMultipart((Multipart)content);
     } else {
     handlePart(message[i]);
     // Close connection
     folder.close(false);
     store.close();
     public static void handleMultipart(Multipart multipart) throws MessagingException, IOException {
          for (int i=0, n=multipart.getCount(); i<n; i++) {
               handlePart(multipart.getBodyPart(i));
     public static void handlePart(Part part) throws MessagingException, IOException {
          String disposition = part.getDisposition();
     String contentType = part.getContentType();
     if (disposition == null) { // When just body
          System.out.println("Null: " + contentType);
          // Check if plain
          if ((contentType.length() >= 10) && (contentType.toLowerCase().substring(0, 10).equals("text/plain"))) {
               part.writeTo(System.out);
          } else { // Don't think this will happen
               System.out.println("Other body: " + contentType);
               part.writeTo(System.out);
     } else if (disposition.equalsIgnoreCase(Part.ATTACHMENT)) {
          System.out.println("Attachment: " + part.getFileName() + " : " + contentType);
          saveFile(part.getFileName(), part.getInputStream());
     } else if (disposition.equalsIgnoreCase(Part.INLINE)) {
     System.out.println("Inline: " +
     part.getFileName() +
     " : " + contentType);
     saveFile(part.getFileName(), part.getInputStream());
     } else { // Should never happen
     System.out.println("Other: " + disposition);
     public static void saveFile(String filename, InputStream input) throws IOException {
          if (filename == null) {
               filename = File.createTempFile("xx", ".out").getName();
          // Do no overwrite existing file
          File file = new File(filename);
          for (int i=0; file.exists(); i++) {
               file = new File(filename+i);
          System.setProperty("file.encoding", "iso-8859-1");
          FileOutputStream fos = new FileOutputStream(file);
          BufferedOutputStream bos = new BufferedOutputStream(fos);
          BufferedInputStream bis = new BufferedInputStream(input);
          int aByte;
          while ((aByte = bis.read()) != -1) {
               bos.write(aByte);
          bos.flush();
          bos.close();
          bis.close();
The problem occurs in:
FileOutputStream fos = new FileOutputStream(file);
BufferedOutputStream bos = new BufferedOutputStream(fos);
BufferedInputStream bis = new BufferedInputStream(input);
int aByte;
while ((aByte = bis.read()) != -1) {
bos.write(aByte);
Thanks
Edited by: user10283976 on 30/03/2012 07:36
Edited by: user10283976 on 30/03/2012 07:37
Edited by: user10283976 on 30/03/2012 07:37
Edited by: user10283976 on 30/03/2012 07:38
Edited by: user10283976 on 30/03/2012 07:40
Edited by: user10283976 on 30/03/2012 07:41
Edited by: user10283976 on 30/03/2012 07:42

http://www.oracle.com/technetwork/java/javamail/faq/index.html#encodefilename

Problem reading csv file with special character

Hai all,
i have the following problem reading a csv file.
442050-Operations Tilburg algemeen     Huis in t Veld, EAM (Lisette)     Gebruikersaccount     461041     Peildatum: 4-5-2010     AA461041                    1     85,92
when reading this line with FM GUI_UPLOAD this line is split up in two lines in data_tab of the FM,
it is split up at this character
Line 1
442050-Operations Tilburg algemeen     Huis in
Line 2
t Veld, EAM (Lisette)     Gebruikersaccount     461041     Peildatum: 4-5-2010     AA461041                    1     85,92
Anyone have a idea how to get this in one line in my interbal table??
Greetz Richard

Hi Greetz Richard
Problably character contains same binary code as line feed + carriage return.
You can use statement below as workaround.
OPEN DATASET file FOR INPUT IN TEXT MODE ENCODING UNICODE
In this case your system must support Unicode encoding
Kind regards

Problem with special chars in BLOB datatype using contains keyword

Facing problem, when part searching with special chars in BLOB datatype. It is considering the non alpha-numeric chars as a separtor in a provided string
EX:
SELECT *
FROM RESUME_TEST P,grst_candidate d
WHERE d.candidate_id = p.candidate_id
AND CONTAINS(P.CAND_RESUME,'%VB.NET%',1) > 0
Strings: , VB.NET , PL/SQL AS/400 , C etc..
Followed the below approaches
1) created a table:
Syntax: create table resume_Test(cand_id number(10),cand_resume blob);
2) inserted the values into this table upto 60,000
3) created a context index
3.1 created preferences
Syntax:
BEGIN
ctx_ddl.create_preference('try_lexer3','BASIC_LEXER');
ctx_ddl.set_attribute('try_lexer3','printjoins','-_~!@#$%^&*(){}[],=?\;|><.+');
END;
3.2 created context index
Syntax:
CREATE INDEX CANDRESUME_CTX_IDX ON resume_test (cand_resume)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ('LEXER try_lexer3 memory 500M');
4) while executing this index, it is taking much time approx 6 hrs(plz explain why it is taking time)
5) Problems:
5.1 when searching with string(VB.NET , PL/SQL AS/400 , C etc..) it is considering the special char as a separator
5.2 used escape char (\) also, but no effect
5.3 when searching with single char, it is giving error (ORA-29902,ORA-20000,DRG-51030)
5.4 getting the above error with wild card chars (& ,_, (),{},[])
So, please explain the clear scenarios, why am getting this error , and how to get the proper results.

Have you tried adding the / char to the printjoin characters?
Indexing can take a lot of time, depending on the amount of data and your machine's power. You could try to parallelize the index creation and / or assign more memory
CREATE INDEX CANDRESUME_CTX_IDX ON resume_test (cand_resume)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ('LEXER try_lexer3 memory 2000M') PARALLEL 8;

E-mail adresses rejected

Printer HP Officejet Pro 8600 Plus
ePrint set up, printer has an e-mail and number of users with their e-mail adresses has been entered and stored as to be allowed to use the printer.
When one of them tries to send a mail to the printer, it is received there, but it is rejected as the user is not allowed to use the printer, thought his address is in the 'white list'.
If I set the printer service to 'everybody' then all works, but this is not the meaning of the feature.
How to set all so that it works?
<reading many other threads with similar problem, I made sure that: the server the mail is sent from (SMTP) has same domain as the from addreess, that means it is sent via the e-mails provider server and no domain/server missmatch exists.
The sender also receives korrekt answer mail, asking him to check if the printer is online or the internet works or if he is allowed to use the service.
Tested from windows life mail and two android devices.

Hello ottosykora1,
Welcome to the HP Support Forums. I gather that when using the allowed senders feature of HP Connected and ePrint that some of the allowed senders are having ePrint jobs that don’t print.
I have included the Learn About Print History in HP Connected document. It will allow you to check to see if there is an error message attached to the failed print job. I have also included the ePrint Job Did Not Print document. It will review why an ePrint job may have failed, such as the attachment(s) were too large or an unsupported document was sent to the printer.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Historical Log of E-mail Adress in SU01 transaction

Hello,
I need to know if there is a way to see the log changes in e-mail adress in transaction SU01.
Someone had change a SapUser e-mail adress in SU01.
I've look in Table ADR6 and ADR7, and it only has the actual e-mail.
I've also see transaction SUIM and there is notihng related with 'change e-mail adress'.
Can you please help me.
Thanks,
Best regards,
EF.

Try to check the change documents for current user in SUIM -->
http://help.sap.com/erp2005_ehp_04/helpdata/EN/90/c3e45b841f214ca32fcc17f7eb059e/frameset.htm
Regards.

STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.

I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionInterval

Hi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK?

I am getting pop-ups, and web pages are opening with "special offers." My yahoo mail has advertising covering the mail messages. This is new. What do I do?

I am getting pop-ups, and web pages are opening with "special offers." My yahoo mail has advertising covering the mail messages. This is new. What do I do?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
SCAN WITH ALL PROGRAMS.
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

Text fields special characters problem in forms created with ID

Hi there,
I'm creating form document with ID.
The problem with special characters appears after exporting file to interactive pdf.
When filling up text field, special characters (polish language specials in my case) are replaced by squares.
I do not know if this is a ID problem (and I should set encoding during pdf creation somehow) or Acrobat/Reader problem (tried both and also in Polish or English versions).
Some help would be appreciated.

I am Creative Cloud User and downloaded fresh ID less than 2 hours ago.. And honestly the last thing I would think about was updating.
But in fact - it was the problem.
So thank you very much for help!

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?

Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon

Problem to invite participant with special e-mail adress

Similar Messages

Maybe you are looking for