Problem trying to build an ad-hoc wifi network between Leopard and Win XP

Hello,
I hope this question was not previously posted despite my attempts to find one related.
I am trying to do something that sounded very basic to me until I tried to do it : connect a Windows XP equiped PC and a Leopard equiped Power G4, through an ad-hoc wifi network (in order to later develop a crossed platforms client/server app ).
What I did :
- Create a network from Leopard using both default (11) and specified (6 <-> default one under Win XP) channels
- Connect to this (detected) network on Windows.
- Try to ping (in a terminal with the suiting IPs) between each other...
But this looked like they are not connected, or that they cannot discuss together, though they are obviously connected together.
I also tried to create the network from Windows (although it is not as friendly as it is through Leopard Interface), the same way, but without the possibility to specify the channel (that should be 6 according to some forum read on the net ). I then connect to it through the PC and the Mac. The result is the same... indeed! No Ping, no telnet, nothing...
Then, I am wondering if there is something that is so specific to each platform that they cannot connect together or if there is something I did wrong. Since I am not used to networking and, furthermore, the Mac World (ie newcommer to it), I may have missed some basic thing. So, I any of you have an idea, it'd be welcome .
Thanks for reading, and in advance for trying to figure it out.

I managed to connect them finally. But I still can't understand what was the exact problem, though I know now where it was :
My Win PC was also connected to a company network. When I disconnected it and connected it with the Mac instead, everything suddenly went fine! It also works of course if no computer is connected to the company network.
Now, this solves my problem but does not answer my question. There are obviously skills I missed about networking.. do any of you know why the connection of this company network ruined my ad-hoc network when connected on the PC and not when connected on the Mac?

Similar Messages

  • Im trying a home network between Mac and Win 7, but its very slow

    Hi guys,
    ive searched for this for the last couple of days, but i havent found my sollution yet.
    I have been trying to setup a network between my macbook and win7, and it works...i can move data.
    The problem is that it is VERY slow. (2MB/sec max in the monitor app, it takes 6 minutes to transfer 1GB)
    This is my setup:
    Macbook 2011 ML 10.8 (I use WiFi to the router)
    Zyxel P-2601HN-F1
    Dell PC (connected thru ethernet cable to the router)
    The ethernet adapter of the Dell is 192.168.1.37 and its a new cabel.
    So i type in CMD-K, then smb://192.168.1.37 and connect with user and pass
    I tried all the stuff i read here, like changing channels, but it stays really slow.
    The crazy part is when i do both in Wifi, its almost as fast as with cable...and i DO use different ips in the smb connection
    Maybe im going wired all over the studio and my house, but i would be awesome if this would work at least at 10/20MB/s, thats almost usb stick speed.
    please help,
    wendel

    So i bought the Airport Extreme and hooked up all my hd's on the usb port...
    the wireles upload speed from macbook to hd's is 5-6MB/s which is a lot better (40-48Mbit/s)
    in the end i think its a protocol & adapter settings issue, with Windows using smb2, and apple using some old protocol from the 90's in ML 10.8.x
    Also, there are a lot of (for me) complicated network adapter settings one has to know, before getting great transfer speeds between Win and OSX...so its easy to mess it up in Windows 7.
    I read that Mavericks switched to smb2 too...so let's wait for all my software to be mavericks compatible and see how fast that will be with my Airport Extreme!
    cheerio

  • Creating a local wifi network between macbook and iphone

    Hi there
    I'm in a hotel and want to move some files to my iphone, but the computer I have isn't my synching machine. I would like to create a wifi network that the iphone and the macbook can both join. I also have an older airport express on hand, and am using Snow Leopard on a newer macbook pro.
    I've tried creating a wifi network on the macbook and joining from the iphone, but the iphone can't see the network even when specified manually.
    I've also tried making a network with the airport express, but the same thing happens as with the macbook.
    I feel like this should be do-able, but I'm missing something. Any help would be greatly appreciated.

    Hi,
    I have been trying this for days now without success! I seem to create a computer to computer network ok (although I dont know if I should use dhcp or dhcp with manual or manual ip setting..??), and my iphone recognises the wifi name I give it.... but shows a different ip address!
    and when I try the desired app (iosc), it doesnt seem to be transmitting any iosc data to my max/msp patch. Is there a simple test to check if the iphone is actually connecting ? - even though the ip addresses are different (weird!?)..
    any help very much appreciated...

  • How to create a wifi network between Mac and iPhone

    Hi there,
    I have just wired Internet at my house, and i would like to create a network with the wifi of the mac, to connect my iPhone to the Internet.
    Is that possible?
    i have tried to do, I've created a network, encrypted it, the iPhone recognize it, but when i try to use safari, the following message appears.
    "safari can`t open the page because it can't find the server"
    So, is that possible and i am doing something wrong, or it isn't possible?
    thx in advantage
    Marcelo França
    Brazil

    This is a possibility. But please be aware using your Mac to emit a WiFi connection is a temporary solution. And it will get a short range unlike an actual WiFi Router. Also you may find it to be unstable at times. The Airport Card in your Mac was not designed to be a full time Router WiFi emitter. But more of a receiver to get the signal and use it for personal use.
    1. Unlock the network on your Mac make it an open network
    2. Go to your iPhone, Settings-Wireless-Tap on blue circle next to network name, Choose Forget network
    3. Now go back, It will rescan and find an open network, Connect, and see if Safari works
    If Safari works, Then you had a Security issue. Try using WEP 128 bit 13 character passkey or WEP 8 Character Passkey.
    Cheers and best of luck
    Message was edited by: Andrew T.

  • HT1145 I have an older plug in version of Airport Express and am trying to connect it to my wifi network to boost coverage but it is not connecting to my network.

    I have an older plug in version of Airport Express and am trying to connect it to my wifi network to boost coverage but it is not connecting to my network.

    What is the make & model of the wireless router that you are trying to "boost" with the AirPort Express? Is your Express an 802.11g or 802.11n model? Is the connection between routers going to be a wired or wireless one?

  • How do I share wifi data between iMac and windows based computer on wifi network?

    I have an unsecured wifi network at home and need to easily share photos between computers>  I have an iMac and a couple window based computer> Is ther an easy way instead of using a thumb drive?

    Since photos are typically large files it will probably be quicker with the thumb drive. The other way is to set up sharing where the files are located and directing the other computers to look there.

  • Un-link list of preferred WiFi networks between devices

    I have one wifi network for internet access, and another one for TimeCapsule. TimeCapsule is for my MacBook. But I DON'T WANT MY iPad TO JOIN THE TimeCapsule network. The issue is: when I tell my iPad to "Forget this network", it also dissappears from my MacBook! Can anyone advice me how I can un-link the lists of preferred WiFi networks between different devices?
    Thanks!

    thanks for your reply, but this isn't exactly the issue.
    One network is simply hosted by TC, which provides a (hidden) wifi network for my MBP.
    Independent of that, there's a public wifi network in the room. My iPad should simply ignore the TC network, and connect to the public wifi. I never entered the TC network details on my iPad, but (I'm assuming) because of iCloud keychain sharing, it automatically picks up the TC network, and because this signal is stronger, connnects to it. when I tell the iPad to "forget this network", my MBP also fogets it, and if I set it back up on the MBP, ...
    I could just disable iCloud on my iPad, but that's annoying for other reasons.
    I'd be very grateful if you hab any suggestions!

  • Why can't iPod connect to wifi network when iPad and Macbook can?

    Why can't my iPod connect to wifi network when iPad and Macbook both can? Connected in the past, but not for the past week.

    - Reset the iPOd. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off andthen back on the router
    - Power off and then back on the router.
    - Reset network settings>Settings>General>Reset>Reset Network Settings
    iOS: Troubleshooting Wi-Fi networks and connections

  • Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook

    Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook..
    why is it sooo hard still --- can anyone inform me on this miracle app please
    thank you
    sincerely
    Theigalaxy

    find my iphone is something one needs to activate on the phone itself using the same appelID is nowhere near enough
    if it is then one can track, play a sound and remote whipe it from
    www.icloud.com
    if your screen is smashed and you think you can use find my iphone to get any data from your phone you are sadly mistaken

  • I have the iPod 5th gen. and my iPod wont connect to my wifi. I've tried everything. I reset my wifi networks and it still wont work. What do i do???

    I have the iPod 5th gen. and my iPod wont connect to my wifi. I've tried everything. i rest my wifi networks and it still wont work. What do I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    For the future, saying you tried everything provides use with zero info as to what you did try. If you really tried everything then there is no way we could help

  • Trying to re-join a known wifi network

    I have issue sometimes with my iPhone or iPad to rejoin a known wifi network.
    For instance each morning I am connecting my iPhone to a public transport free wifi. My phone recognises and connects to the wifi however it cannot connect to the internet, because the safari browser is not launched automatically as it should.
    I have tried to "forget the network" and try again but that did not work. I have switched my phone off and on again, no result.
    I have same problem in hotels when I use the hotel wifi. When I come back to hotel and try to reconnect, wifi is connected, but web browser does not launch therefore I cannot access the hotel website to register and accept terms and conditions for instance.....
    Should I bookmark the website when the web browser is launched the first time when I register, so that I can access the website again if it does not launch automatically ?

    I stay in various hotels each month throughout the year and have occasional problems logging on to the local wifi.  I consulted an Apple Genius staff once about this and it was suggested to reset the network settings.  I tried this and it does help although I forget about it after a few months of using dozens, perhaps hundreds of different wifi hotspots.  Once you experience problems, go to General in Settings, hit Reset at the bottom then hit "Reset Network Settings".  After a few seconds all stored settings regarding past wifi connections will be erased.  By starting fresh like this you may have better luck.

  • Very strange problem: some links redirect to an old wifi network

    When I use my public libraries wifi I have no problem. It's afterward that the reign of terror begins. When I'm back home, even though I'm not connected to the library wifi anymore, if I click on some links (for example, the link at the top of a RES reddit link), I get rerouted to a library page that says the page isn't found.
    I am thinking it must be a dns lookup or domainname lookup issue or something, but my resolv.conf looks exactly normal, and I'm not sure where else to look. Any thoughts you have would be much appreciated.
    Thanks
    PS - I should note that this never happens with any other wifi network I connect to. Only the Public Library one.

    You did not mention which browser you use, but try clearing your browser cache.  At the library, use whatever private or incognito mode your browser supports.  I suspect they are modifying content on-the-fly to either "Improve your experience" or to monitor your actions.

  • Can´t connect to wifi network on IPAD and I have tryed everything

    i have an ipad and i can connect it to a wifi network everywhere but not at my work... there  is people there that have iphones and samsumg galaxy that can connect and all the laptops used there have wifi connection... i have already tryied to use the tips that apple gives on its site.... Does anyone suggests anything?

    Restart your router.

  • When iBooks has a problem connecting to a wifi network, it hangs and the page goes blank

    i use the books I have in iBooks as study aids, a lot. I find that when I am in the vicinity of a new or busy wifi network that the page or bookshelf just goes blank, I have to switch wifi off and restart the app, then it works again. It is most annoying though.

    Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).

  • How do i get a wifi connection between iphone and iMac?

    I downloaded the app "CityMaps2Go". Some of the maps I need are bigger than 20MB and Apple doesn't allow to download that amount over a regular 3G telephone connection. "CityMaps2Go" is asking me to connect via Wifi to download bigger maps. But I have no Wifi right now here at home available. My iMac runs with DSL6000 from Deutsche Telekom (High Speed Internet). Even tough my router has WLAN available, it is not konfigured for Apple hardware (I guess, never worked) But the Internet connection for my iMac is very fast, so no problem there. Here my question: While my iMac is online and connected, can I somehow connect my iphone via wifi to my iMac, so I can download those bigger maps from "CityMaps2Go"??? Thank you!

    Just download the updates via iTunes on your Mac and then sync your iPhone to update them.
    You cannot simply create a Wi-Fi connection between your computer and your iPhone, you must have a Wi-Fi router or access point to connect to.

Maybe you are looking for

  • Using xml file in java application

    How can i get the attribute name & value into my java application from a xml flie?

  • PI 7.1 Dual stack to PI 7.4 Dual stack upgrade

    Hi SAP friends, We are planning to upgrade PI 7.1 (Dual Stack) to PI 7.4 (Dual Stack). Please suggest best way to do this: In-place upgrade PI 7.1 to PI 7.4 (Dual Stack) New Install PI 7.4 (Dual Stack) and migrate the contents from PI 7.1 Thanks Vika

  • LR 4 Library: Images not fully loading (unsharp)

    I'm editing some images ready to send to a client and I find that some them do not become fully sharp, when viewed in the library module, in loup view.  Of the 14 images showing in one folder (selected with "pick") only the first 2 are sharp when vie

  • Row level ppr in advanced table

    Hi, my requirement is as follows... for example One dept lov is there, and two more fields are there, one is LOV and another one is Message text input. if I select 10 in DEPT lov need t show lov field and hide text field if i select 20 need tod show

  • ABAP-HR  PB40 generating applicant number

    Hi All In TRNX CODE : PB40 I am Trying To generate applicant no. Action type : Initial entry of basic data ---> execute It is generating run type error : <b>Short text                                                                                </b