Problem Updating Devices

I wasn't sure which forum to post this in, so I started here.
I have a bunch of Torches that I need to update. I can't do it wirelessly so I am using the desktop software to do this. I have downloaded the update from my carrier and installed it on my PC. I have run one device through the process and everything worked fine. I connected 2 other devices to my computer since then and neither device recognizes that there is an update. I tried one of the devices on another computer where I installed the update.
Is the desktop software allowed to only update 1 device?? I have about 20 to do and want to bring them back to my computer to update them. Or how can a I get multiple devices updated from one computer??
Thanks in advance for your help.
Dave
Solved!
Go to Solution.

I have just the exact resource you need... for updating multiple devices.
Read this instructional, and feel free to post back here if you need further help.
http://www.port3101.org/power-users/182-updating-os-multiple-devices-adding-3rd-party-app-install.ht...
You can skip the part about adding back third party applications if that does not apply to you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Upgrade from LMS 3.0.1 to LMS 3.1 or 3.2 and problem with devices update

Hello
How to upgrade from LMS 3.0 December 2007 update to LMS 3.1 or LMS 3.2. The problem is the large number of C2960S-24TS-L switches that my organization has and cannot managed them..
I tried to upgrade devices through Software Center but always Ciscoworks informs me with the following message.
"Error while downloading package information from Cisco.com for the selected products. See the log file for details".
Also i can not run EOL/EOS inventory report. The message is
" INVREP0102: Cisco.com user credentials are invalid. Enter correct credentials." I check my credentials and is right.
The server has access to www through proxy without any restrictions.
In the past I've already updated devices through the software center. Also in the past i ve run EOS/EOL inventory reports.
The LMS 3.0 December 2007 has the following products
LMS
3.0.1
16 May 2008
CiscoWorks Common Services
3.1.1
02 Jul 2009, 07:44:58 EEST
2.
Campus Manager
5.0.5
11 Oct 2009, 07:36:10 EEST
3.
CiscoView
6.1.7
02 Jul 2009, 07:45:05 EEST
4.
CiscoWorks Assistant
1.0.1
02 Jul 2009, 07:45:05 EEST
5.
Device Fault Manager
3.0.5
12 Jun 2010, 07:31:48 EEST
6.
Internetwork Performance Monitor
4.0.1
02 Jul 2009, 07:45:11 EEST
7.
Integration Utility
1.7.1
02 Jul 2009, 07:45:14 EEST
8.
LMS Portal
1.0.1
02 Jul 2009, 07:45:16 EEST
9.
Resource Manager Essentials
4.1.1
02 Jul 2009, 07:45:17 EEST
Has anyone knows what can be the problem??.
Thanks

Hi,
the problem to access cisco.com is because of a "bug". Its ID is CSCto46927.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto46927
Symptom:
After the 16th of June 2011 LMS will no longer be able to download Software and Device Package updates, or PSIRT and End of Sale/Life information from CCO
Conditions:
Hosted services in Cisco.com that are being leveraged by LMS, for downloading the latest Software and Device Package updates, as well as the PSIRT and End of Sale/Life information are being migrated to a new framework and the old services will be retired.
This will affect all LMS 3.x and 4.x versions.
Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
Workaround:
Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch"
Because of that it is necessary to upgrade not only to 3.1 or 3.2, you need 3.2.1 to get the patch and then access to cisco.com again.
The question about the better way for updating I can't answer. I did a update to 3.1 and then to 3.2. But I think you will find the requirements for the updates in the notes for them.
But I can't find LMS 3.1 in the cisco download center. There is only 3.2 and 3.2.1 available for me.
Sven

Problem updating my device's software?

Yesterday I wanted to install the Spanish lanugage in my BB because I had removed it to open some space up when I first got my phone ... At the same time, I decided to update some applications in my phone ( BB maps, Windows live messenger etc.). I connected my phone to my PC, got in Application Loader, after making some adjustments, clicked ''Next''. A couple of minutes after starting the update, my phone turned off and on my PC, I saw the following message: A fatal error has occurred while updating your device's software. Please try again. I try again and again and again but everytime, my phone would just turn off for no reason and restart itself! Today, I went through the whole procedure with the same result: phone shutting off & restarting, error message displaying on PC screen - no update to the device. What the hell?
Oh and since I've updated my phone to the latest version, sometimes I want to listen to music but the music just wont play ; my phone just mutes itself... I need to always press STOP and PLAY back again so that my song would play or raise the volume... Even if I've been listening to a song and the next song is supposed to play, it doesn't - I need to stop the song and press play again.
I'm really, really very unsatisfied with my storm. Problems over problems over problems ...
- '' Le sage ne dit pas ce qu'il sait et le sot ne sait pas ce qu'il dit. '' E.W.

Before you start the activity you must have a back up of your device data using Blackberry desktop manager.
Then follow the below for OS upgrade by installing device OS in the PC -
Step #1:
Before starting make sure that BlackBerry Desktop Software is installed on the Computer.
Step #2:
Make
sure that you have installed updated device software installed in your
PC. Check this link to get update device software from carrier OS
download site.
Step#3:
Users can perform a full or
selective backup of the data using the Backup and Restore tool in
BlackBerry Desktop Manager by completing the following steps:
1. Connect the BlackBerry device to the computer running BlackBerry Desktop Manager
2. Open BlackBerry Desktop Manager
3. Double-click Backup & Restore
4. Select Backup to perform a full backup or select Advanced to perform a backup of specific databases
5. Choose a location to save the backup file, then click Save
Step#4:
To perform a clean install of the BlackBerry Device Software, perform the following steps:
1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager
2. Double-click the Application Loader icon
3. Click Next to start the installation process
4. Type your BlackBerry smartphone password, if prompted, and click OK
5. Click the check boxes next to the names of the applications you want to load, and then click Next
6. Click Advanced, and then click the check box beside Erase all currently installed applications.
7. Click Next.
8. Click the check box next to Do not automatically backup the application data during the loading process
9. Clear the box next to Backup and restore applications installed wirelessly
10.Click Next -> Finish
11.
When the process has completed, the message The loading operation was
successful will appear. Click Close to return to BlackBerry Desktop
Manager
Note: It's true that the process is for advanced level user. If you think that you might damage your device then it's better to ask help from either mobile operator or someone user.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Problem updating my device?!

Hi, i've got a blackberry 8520 and i plugged it in to my laptop and desktop manager said there is an update for the phone so i clicked update phone and it backed my phone up then it tried downloading the modules but it gets stuck to 604 out of 658, it happens all the time, could it be because im connected to a mobile broadband service? Because this is the only time its happened
Solved!
Go to Solution.

Could be. Whenever you have problems updating your phone, it often helps to do it one step at a time.
First, download the new OS to your computer, and install it on your computer. Here is the download site. Once you have the software on your desktop (PC, right?), you can then do the update on your phone through desktop manager, and not have to worry about connectivity issues during.

Error publishing from Muse - "error updating device redirect setting"

After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?

I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,

Error while updating device software

I was trying to update device software using latest ovi suite and suddenly my device stop working.
nowitsnot able to switch on...and while i tried to installing software..i also got 12017 error..
please help me ..my cell is dead now

Sorry to know about your problem.. In absense of the knowledge about which Phone do you have, not sure how much this resource will be helpful. If nothing works ( The resets will not work on S40 phone) the ONLY place to get it working again is Nokia Care...

Problems updating ipod touch 3g to os 5

Hi... I am very excited to see what all the buzz is about for the new OS 5.x for use on my ipod touch 3g but im having problems updating my device. my itunes has been updated to 10.5 and i have conected my touch to my computer and clicked on update. but all that comes back is that it is updated to the newest version which it states 4.2.1 .... but i dont see any of the new stuff that is supposed to be with os 5 i have erased and put my touch back to default settings and it still does the same thing. i erased using itunes when connected by the cord and i have tried using the reset feature on the touch itself w/o the cable. if anyone has some advice for me it would be greatly appreciated !!

heather from gravenhurst wrote:
it is an 8g & ive talked to the itunes support team and they say that it is indeed a 3g
Not true. Apple did not make an 8GB ipod touhc 3rd gen at all. They do not exist.
You can see for yourself:
Identifying iPod models

LMS 2.6 / RME 4.0.6 : Update device packages

Hi All,
I want update device packages for the device Unknow c3560v2 and ME2400 on ciscoworks lms 2.6.
CCS= version 3.0.6
CM= version 4.0.10
CV = 6.1.5
DFM = 2.0.7
IPM = 2.6.0
RME = 4.0.6
The server doesn't have access internet so i downloaded files and copy this on directory psu.
1) I've tried directely upgrading the device package in RME, but it failed. He want file mdf v1.22 and the version is V1.20.
2) I've upgrading CiscoView for device, it's ok
3) I've upgrading Campus Manager with version 4.0.13, it's ok
4) I've tried upgrading the device package in RME, but it failed. He want file mdf v1.27 and the version is V1.25 after upgrade Campus.
I don't find on site cisco the version 1.27 of mdf, where i can found this file ?
I have the version 1.56 but it's compatible for LMS 2.6 and RME 4.0.6 ?
How can uninstall a version of mdf if I have a problem with this version?
thanks

Indeed. It does look like the only MDF available is 1.52 for CS 3.0
I also saw the note:
You must install Campus Manager 4.0.13 and MDF 1.27 before installing CMDeviceUpdates 2.0.
RME 4.0.6 Release Notes
FYI. LMS 2.6 is EOL. As such I suggest you contact your account team to see if they can acquire it for you.
Thanks.

Update Device Name in BAT

Hi All,
I've been struggling with this BAT problem for some time.
I'm trying to update the Name for a phone (eg: CSF), device profile, Trunk device, etc, using BAT. The obvious problem with this using BAT, is that I'm trying to update the field which identifies the object you are trying to update. A bit of a tail biter.
To explain this in a different way, this would not a problem with SQL, of course, as you can do something like the following:
UPDATE device SET name='newName' WHERE name='oldName'
I was wondering if anyone has had luck achieving this within BAT? If the functionality is there imagine it would be through the use of a second 'Device Name' field or something of the likes.
Any help would be greatly appreciated.
Regards, Mike

You can interface with the CUCM Database utilizing SQL statements. There are several blogs on the subject. The command would be run sql update...
Or you if wanted to use BAT export all details, change the device name, Insert all details, delete out the old records.

HT4623 im having a problem updating my phone. it downloaded the first part but then when i hit install it says software update is not available at this time. what do i do ?

im having a problem updating my phone. it downloaded the first part but then when i hit install it says software update is not available at this time. what do i do ?

Does it say Try Again Later? If so, try again later. Worked for me on one device, later! 2 of my devices are being a bit more stubborn!

Can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue

can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue

Hey damien555,
Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

I have a problem updating the new ipod touch 5th generation

I have a problem updating the new ipod touch 5th generation and I need help:
With each attempt I receive the message:
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
The iPod only displays a USB cable with an arrow pointing to an iTunes logo.
I receive a "Are you sure..." message with the 2 options, one to Restore and Update and the other to Cancel.
Each time I have selected the Restore and Update button and then moved through the acceptance screens. Then iTunes begins to download the iOS 6.0.1 Software Update, which usually takes about 50 minutes. During the download I will receive messages that an iPod has been found in restore mode.
After the download is complete no update occurs to the iPod and iTunes displays the Device Summary screen showing derive Name as iPod and all other items as n/a.
The iPod was working great without any known issues prior to attempting to update the OS.

Maybe:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

EA6300 5g Problems and Devices with no MAC

Problem 1
I have been on the phone with Support about 5g connection problems;
sometime it connects, sometimes it does not,
When I reboot the router in my device connects, after awhile it starts to degrade and drop.
Yes I have separate ssid, Yes I have been working with support,
So I had to go back to version 1.1.39
Problem 2
Devices where showing up, with MAC address as 00;000;00
Sorry to Say I settled for my Asus RT-AC66u in the meantime.
Chris

Hi! You mentioned about 1.1.39, is that your current firmware? Did you try to update the firmware to Ver.1.1.40 (build 153731) and experienced the same issue? Did you also try changing the channel settings on the 5Ghz network?

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

No updatable devices found after firmware update

Unfortunately I didn't check here before doing the latest updates. I dl'd the following on the night of July 1:
2007-07-01 01:49:08 -0400: Installed "SuperDrive Firmware Update" (2.1)
2007-07-01 01:49:31 -0400: Installed "iTunes" (7.3)
2007-07-01 01:49:35 -0400: Installed "Safari 3 Beta Update" (3.0.2)
2007-07-01 01:53:02 -0400: Installed "Mac OS X Update (Intel)" (10.4.10)
2007-07-03 00:30:01 -0400: Installed "Audio Update 2007-001" (1.0)
Since then each time I restart the computer the SuperDrive Update launches and tells me no updatable devices have been found. But this machine has a SD, unless I'm very much mistaken. Why won't the update take? Is it related to the ex HD issues I've been reading about here with 10.4.10?
I also just looked at my sys log and it could be its own novel since these updates. I was going to post it in hopes it would help the Mac guys smarter than I, but I think it would flood out this post.
I am also having the internet drop issue, again only when I'm on battery power, but I understand that's a bigger issue than just my machine. My Safari windows seem to be hanging and giving me the spinning beach-ball a lot when I try to scroll.
I ran disk repair on permissions, that's all sorted out. I don't know what else to do to resolve the firmware update. Please help. Thanks!

At the risk of sounding stupid.. how would I delete the download?
And if I have a SuperDrive, which I do, why wouldn't the update apply to me and why would Software Updater have prompted me to download it in the first place?

Problem Updating Devices

Similar Messages

Maybe you are looking for