Problem Using Inner Group Name

Hi
In my report design, I have 4 groups level created and all of them are based on Account number. Its like group and subgroup structure.
All I wanted to do is , I want to supress the Footer of Inner most group(group 4) based on the group name.
for example if the group4 name ="something" I need to supress group 4 footer section.
I tried to put the above condition in Supress formula of group4 footer section. its not working.
On the formula editor I choose the group4 name field avaiable under Report fields. Its comes as
GroupName ({@Account Number})  in to the formula ( There is not mention of which group name its refers to).
So by default its  apply the formula on the outter most group name(group 1). So my condition fails.
Please help me.

This my structure
Group Header1                                                           Group 1 Name
    Group Header2                                                        Group 2 Name
       Group Header3                                                     Group 3 Name 
           Group Header4
                         Details                  AccoutNumber    Account Description       Amount
            Group Footer4                  textbox            Group4 name                      sum of Amount          
       Group Footer3
    Group Footer2
Group Footer1
I want to supress the Group Footer4 based on Group4 name.
     ASSETS
     CURRENT ASSETS
     1XXX   0092     CASH SAVINGS DBTCA     $172,868,975.44
                                                                      $172,868,975.44
     TOTAL     CASH & CASH EQUIVALENTS
     13XX   5555     A/R OTHER                           $5,423,705.50
                                                                      $5,423,705.50
     TOTAL     ACCOUNTS RECEIVABLE
     1XXX   0001     I/C REC MGMT LLC SAN FRAN     $8,878,791.16
     1XXX  0001     I/C REC MGMT CO SAN FRAN     $45,046,263.00
       TOTAL     INTER   COMPANY RECEIVABLE           $53,925,054.16
     1XXX  0000     DEFERRED TAX ASSET     $70,548,040.00
     $70,548,040.00
     TOTAL     NOTGROUPED
      302,765,775.10
The bold lettered text are belongs to Group4 footer . I want to suppress it if the group 4 name is " NOTGROUPED"
Edited by: Nivazz on Sep 9, 2009 5:16 PM
Edited by: Nivazz on Sep 9, 2009 5:17 PM

Similar Messages

  • Using Customized group name fields in Live Office

    Hello everybody,
    I've created a Crystal Reports based on a BEx Query and including a costcenter hierarchy. Now I want to add this report in Excel sheet via Live Office. I did this according to the official HowTos provided by Ingo Hilgefort. Now I've following issue. When I choose the data for the selected fields in Live Office, I could manage to insert the Live Office object into my report but the display of the cost center hierarchy nodes doesn't comply with the display in Crystal Reports. There I've defined a group with a customized group name field (costcenter.medium description) Live Office seems to use only the costcenter node ID.
    Crystal Report:
    Marketing und Vertrieb----
    63     63     63     63     0     0
    Vertrieb----
    54     54     54     54     0     0
    Vertrieb a----
    1     1     1     1     0     0
    Vertrieb a----
    3     3     3     3     0     0
    Vertrieb a----
    4     4     4     4     0     0
    Vertrieb a----
    2     2     2     2     0     0
    Vertrieb a----
    2     2     2     2     0     0
    Vertrieb a----
    3     3     3     3     0     0
    Vertrieb a----
    2     2     2     2     0     0
    Marketing----
    34     34     34     34     0     0
    Marketing a----
    3     3     3     3     0     0
    Live Office:
    1000H1.1000H1000.1000H1300----
    63      63     63     63     0     0
    1000H1.1000H1000.1000H1300.1000H1310----
    54      54     54     54     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3100-----1      1     1     1     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3105-----3      3     3     3     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3110-----4      4     4     4     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3120-----2      2     2     2     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3125-----2      2     2     2     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3130-----3      3     3     3     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3135-----2      2     2     2     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3140-----34      34     34     34     0     0
    1000H1.1000H1000.1000H1300.1000H1310.1000/3150-----3      3     3     3     0     0
    How can I use customized group name fields in Live Office?
    Thank you for helping me on my issue.
    Regards,
    Florian

    live office uses web services to authenticate (dswsbobje) which depends on a java app server for kerberos to be enabled to login with AD. Is Infoview working with AD? This would be required. I'm not sure about your other issues.
    Regards,
    Tim

  • HT2486 i created a group in address book and when wanted to use it it does not allow me to use it in email how do use a group name i created?

    I created a group in address book and wanted to use it, it does not allow me to use it in email how do I use a group name i created?

    How many in the group? Some ISP's have a restriction on that. Check with your ISP.

  • VPN whit surface RT using a Group Name And Password (Secret)

    We are looking to make a conection with  Surface rt to ASA with IPSEC through Cisco.
    Whir IOS and client Cisco give us the option of Group Name and Password for the shared secret.
    Windows RT Surface have not seeing this option for  Group Name and Password
    Is there some kind of combination of username password that would go in the "Use preshared key for authentication" field (such as "username;password" or some other format)?
    We and other LARGE corporations will require this feature to implement  VPN un Surface RT, please give us a workaround or fix it ASAP.

    Hi,
    Based on my knowledge, windows RT support certificate or pre-shared key for IPsec authentication.
    Windows RT doesn't support  groupname+password.
    Thanks for your understanding.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Problem using Detail group region

    Hi Guys,
    I'm having problems using a detail group container. The problem is that when the detail group is placed in the detail region group, there is no button under that group to add a new row to the group. Is this a bug in JHS or have I done something wrong?
    The reason I'm using the container is that I want selective rendering of detail groups depending on the state of an item in the parent group.
    Regards
    Bar
    JDev: 10.1.3.2.0
    JHS: 10.1.3.1.26

    Bar,
    I could reproduce both problems. To fix the problem with the New button, you can change the content of the tableGroupButtons.vm template:
    #if ($JHS.page.hasDetailPageComponents || $JHS.page.hasGroupRegionPageComponents)
    <af:panelButtonBar id="${group.shortName}TableGroupButtons">
    #JHS_PARSE("NEW_BUTTON_NOT_IN_FORM_LAYOUT" ${JHS.current.model})
    </af:panelButtonBar>
    #end
    To fix the issue with the roles check, you can enter the rendered expression that is missing in the rendered property of the group region.
    Steven Davelaar,
    JHeadstart Team.

  • Problem using a group which has a space in it's DN when using LDAP Group mappings in UCS 1.4

    Hey,
    We've been implementing LDAP authentication (Active Directory) using LDAP group mapping in UCS 1.4, and we've noticed that when using a group which has a DN with a space in it (such as "UCS Admins") it wouldn't authenticate the user with the appropriate role.
    Using a DN without spaces (such as "UCSAdmins"), works just fine.
    I should mention that having a base DN with spaces works just fine as well, it's just the group mappings that doesn't work.
    I should also mention that Cisco's "Quick guide to configuring ldap for ucs 1.4" shows an example in which the group's DN doesn't include a space.
    Is there a workaround available which can make it possible using a group which has a space in it's name?
    Thanks,
    Dor

    Hey Roman,
    Thanks for your prompt reply.
    We've tried putting quotes using UCSM which is not possible at all - not for the entire entry nor for the part with spaces.
    We've also tried using CLI ("scope security/ldap/ldap-group") where you have to put quotes if you use a DN with spaces, and it still doesn't work. Furthermore, we tried adding quotes only to the part with the spaces, i.e. - CN="UCS Admins",OU=TEST,DC=TEST. It adds the entry without an error, but shows like we would use "CN=UCS Admins,OU=TEST,DC=TEST". Anyway, it doesn't work either.
    Thanks again,
    Dor

  • Problem using alias field names in a sql query

    Hello,
    I have a question regarding a simple Oracle database SQL query writeup:
    In the following (badly written but properly working) SQL query:
    Query 1:
    select
    soe.field1,
    (soe.field2 + soe.field3) as field4,
    (soe.field5 - (soe.field2 + soe.field3)) as field6,
    (select comp.parValue*soe.field7
    from
    CompTable comp) as parValue,
    (select soe.field8 - (comp.parValue*soe.field7+ soe.field9)
    from
    CompTable comp) as field10
    from
    SomeTable soe
    PROBLEM 1:
    I am re writing the code (soe.field2 + soe.field3) to get the alias field4 or column name field4 that I have created on the fly in the previously for use with the following fields. Can't I rewrite the query as follows. There is something simple missing!
    Query 2:
    select
    soe.field1,
    (soe.field2 + soe.field3) as field4,
    soe.field5 - field4 as field6, <<< field4 does not work here
    (select
    comp.parValue*soe.field7
    from
    CompTable comp) as parValue,
    (select
    soe.field8 - (comp.parValue*soe.field7+ soe.field9)
    from
    CompTable comp) as field10
    from
    SomeTable soe
    PROBLEM 2:
    Similar to the above problem, I was thinking to get a field parValue out of the CompTable table and re-use many times rather than the code shown in Query 1:
    Query 3:
    select
    soe.field1,
    (soe.field2 + soe.field3) as field4,
    soe.field5 - field4 as field6,
    soe.field7* (select comp.parValue from CompTable comp) as parValue1,
    soe.field8 - (parValue1*soe.field7+ soe.field9) as field10      <<<< parvalue1 does not work here
    parValue1*soe.field9 as TaxCondition               <<<< parvalue1 does not work here
    from
    SomeTable soe
    See that the query becomes so simple, but the above query does not work. There is something fundamentally wrong in my usage of the alias field names in creating other fields. The Query1 seems to be the only working option but its very slow as I am redoing and re-writing the whole code again and again to get the parValue field out of the CompTable table for use to create many other fields.
    I will appreciate if you can guide me in the right direction on this issue.
    Thanks and Regards
    Rama

    SELECT tmp.contract_no, tmp.Actual, tmp.Actual - tmp.NbHours
    FROM ( SELECT t.contract_no, sum(l.hrs) AS Actual, (c.labour_hours * c.labour_progress_per) / 100 AS NbHours
    FROM TASK_DELEGATION t
    INNER JOIN COST_CODE c
    ON t.cost_code = c.cost_code AND t.contract_no = c.contract_no AND t.is_inactive=0
    INNER JOIN Labour.dbo.LABOURALLOT l
    ON l.contractNo = c.contract_no AND l.costcode = c.cost_code AND l.pm = 'N'
    GROUP BY t.contract_no, c.labour_hours, c.labour_progress_per
    ) tmp

  • Problem using contact groups in email

    I have created a GROUP of contacts with the Contacts application. There are 21 emails in this group. I am using Postbox as my email client. When I go to create an email and select this group for the TO field, it only puts in 19 of the 21 people in the group ommiting 2 people. Their emails are correct so I am nt sure what the heck is hapening. Any suggestions?
    Many thanks,
    Houston

    Hello Annie,
    Drag it from Address Book to Mail's BCC: field, or just type the name of the Smart Group there.
    PS. It's usually considered very bad form to use the To: or CC: fields for multiple addies.

  • Problem using my Group level function in a chart

    Post Author: LcdCyn
    CA Forum: Charts and Graphs
    I have created a function (StatePerRecord) that is displayed under the Details section to evaluate each records' state:
    Here is my code:
    If Not IsNull () Then    (    select         case "fail":            if (Not (IsNull ())) Then               "Passed"           else               "Failed"        case "pass":              "Passed"        default:             "Passed"     )
    else      "NA"
    I also have group section based on Record ID that groups the state record. In the header of the group footer I need to define summary function (StateSummary) such that
    highest state from the state records should be the output here (excluding "NA" state). Here are the priorities:
      Highest - Failed
      Lowest - Passed
    I want to use the StateSummary in a graph to show the Summarized State per Record ID.
    I used Running Totals in my StateSummary function but I cannot see the field in the Chart expert.
    P.S. I use Crystal Reports 10 Professional

    Object (when acting as a map) uses toString() as a poor man's hashcode implementation, so you can get more-or-less the behavior you want by implementing the toString() method in your CIDate class and then storing the instances in an Object (rather than a Dictionary).
    E.g., say your CIDate looks like this:
              public class CIDate {
                public var num:Number
                public function CIDate(num:Number) { this.num = num }
                public function toString():String { return num.toString(); }
    You can use toString() as a comparison operator by keeping things in an Object instead of a Dictionary:
                var testDic:Object = {};
                var key1:ClDate = new ClDate(10000);
                var key2:ClDate = new ClDate(20000);
                var key3:ClDate = new ClDate(30000);
                var key4:ClDate = new ClDate(40000);
                testDic[key1] = 1;
                testDic[key2] = 2;
                testDic[key3] = 3;
                testDic[key4] = 4;
                var key:ClDate = new ClDate(20000);
                var retNum:Number = testDic[key];
    Then retNum should be '2', as expected. This is sort of a hack, but it might work for what you're doing.

  • Prepared statement problem using a field name that contains a "?"

    I am attempting to execute the following query via use of a PreparedStatement:
    select [Spread_By_Cost_Center?], Debit_Category, Credit_Category, Start_Date, End_Date, Allocation_Type From ALLOCATION_FORMULA Where FormulaID = ?
    The query fails with the following message:
    java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver]COUNT
    field incorrect
    However, I can run this query directly in MS-ACCESS, using a value for the substitution parameter (i.e., FormulaID = 1)
    If I remove the "Spread_By_Cost_Center? field from the query within the PreparedStatement, the PreparedStatement query executes successfully.
    So, it would appear that the "?" in the field name is possibly being treated as a substitution parameter. Is this a bug within PreparedStatement? I do not want to use a Statement object, as the PreparedStatement provides a much more elegant solution (when it works).
    Any suggestions?

    That may be so, but as I see it there are two alternatives:
    1. Wait for the "bug" to be fixed.
    2. Change the database to use less problematic column names.
    I know which alternative I would choose.

  • Problem using choice group

    I am developing a project on quiz.
    I have to show question and 4 options in one screen.also I want that the radio buttons(choice group)for the options should be selected by up down keys only.For using up down keys I have to extend canvas.if I extend canvas then how can I place my question and radio buttons?

    You can't use the ChoiceGroup on a Canvas. You'll have to make your own menu widget.
    Another option would be to display first the question on a form with a Command "Answers" and then when the Command is pressed you switch to a List (with List.IMPLICIT set as the type).
    shmoove

  • View and Control Group Name on Upload?

    Is possible to view the group name or to control the group name on a file in Dreamweaver when it is uploaded?
    Since the beginning of this year when I create a new file such as a folder or a PDF and upload it, it is attributing a wrong  group to my user name. If I create a new HTML file from a template and upload, that file is attributed to the correct group with my user name. I can't figure out if you can view the group for a file in Dreamweaver or if you can control it, I've had to use another FTP client to view the group name and figure out this was my problem.
    This group name inconsistancy is causing serious issues, giving me and others in the group the "access denied" error because the files are uploading with the wrong group name. Is there anyway to change the group name or make sure when I upload a file, the correct name is on it?
    I am using a Mac, but others in the group are using a PC and have the same issue. Not sure if the group name is something we can and should be controlling or something that is out of our reach.

    If you are giving permissions to a group or a user, each has a name. Users are part of a group that have access to certain files.
    There are user names and group names, it's part of the permissions. My user name is coming up with two different group names when I am uploading files, sometimes the files have the correct group name associated with my user name and sometimes they have an incorrect group name tied to my user name. I need to know if these group names can be viewed in Dreamweaver anywhere like the permissions are so I know when a file is not accessible to others in my group, and if I can control what group name is being assigned to a file when I upload it. Currently I am using another FTP client to see the what the group name is next to a file, but I cannot change the group name in it if it is wrong.

  • How to change the Group name?

    Hi
    I made some groups and assigned users to it.
    Now the need requires me to change the names of the group.
    Could you please explain me how to do this and also will this chage be also effective in the desktop master rule.
    I'm using EP6.0, SP11
    Thanks
    Regards
    Henry

    Hi,
    I have the same problem.
    We are using the group name for departments.
    How you know department names are dynamically.
    So I need to chnage them sometimes.
    So I want to change the displayname of that grous, not the id.
    How can I do that? And when I cant, can someone explain me the function of the displayname.
    Otherwise can I use the UME-API to change it?
    Many thanks
    STeve

  • Problem with mailing Groups from Address book

    I have been using Groups in my address book for a while - adding people to Groups and using the Group name to email them all at once.  Recently (since turning on iCloud, though I don't know if that is the cause) I am finding the following problem.  I add new people to my address book.  I add those new people to a Group.  I go to mail and use the Group name... but the new people are not in the email list (when I drill into it).  If I go to the address book and use control-click and the drop-down box to select the option to send a mail to the Group, the same thing happens.  Any suggestions out there?  Thanks.

    I am having a similar problem. All the addresses are correct, and I know this because I use them all the time with no errors. BUT when bundled into a group - actually any group I set up I cannot send successfully. I have two groups in my mail program and neither will work.

  • Using Lov display name but save id

    problem: using Lov display name but save id

    solution: put the LOV on the name and use formValue item for the ID with the viewInstance and viewAttribute, and make a mapping for the form value

Maybe you are looking for

  • Deploy a ear file from workshop-enabled weblogic on windows to solaris?

    Hi, I built a java ear application on my workshop-enabled weblogic in windows OS. I need to deploy it over into a solaris weblogic system. Does anyone have any idea if this is feasibe (as i was under the impression that the solaris version of weblogi

  • How to change the screen resolution

    Dear All, Could someone please help and tell me how I can change the screen resolution (i.e. the dimensions of the monitor) in Solaris 10 using CDE? Regards and thanks a lot for your reply

  • Rotate HD video recording on my Mac

    Not strictly an iPhone question, but I can imagine I'm not the only iPhone user one with this problem: I started to record a video holding my iPhone vertically, and when I realised this, I turned it horizontally. So now I have a five minute video in

  • Doubt in Opening a OA page as a popup from OA page on click of a button

    Hi All, I need a help. I have a OApage, from the OA page i want to open one more OA page as an popup on click of a button, So a took the button as normal button not a submit button So in the buttons Destination URI property I have set the property as

  • Where to buy Canon original accessories ??

    The original boxes with some accessories of my new purchase. 7D Mk2 and 24 70 F4IS were taken by somebody from my front porch. (My bad. I put the Canon boxes inside a snow thrower box. The big box was left outside the front porch pending sorting for