Problem using ToolTip_Text on 2 screens

I am using Forms 6i in my application. When installing on a PC with 2 screens the ToolTip_Text property fails on screen # 2. The text is always displayed on screen # 1. Can anyone help me ?
Best Regards
kjellG

I believe I saw a thread a while ago that explained that Forms is not supported for 2 screens. Try the search function.

Similar Messages

Problem using file sharing and screen sharing in Leopard

I have Mac OS 10.5 Leopard installed on 4 computers in a Home Network and have a problem with sharing files and using screen sharing. Here is my setup.
MacBook Pro with my logon ID
MacBook Pro with my fiancee's logon ID
Mac Mini with both of our logon ID's
Mac Pro with both of our logon ID's
The problem I have is I am able to access the Mac Mini computer where we have an external Hard Drive connected for data. She is also able to access it. The only problem is we have it set up to only share this external USB drive. Yet for both of us it shares the external drive along with the internal Macintosh HD. Fortunately this is not a very big deal but since I'm not sharing all those drives why is it doing this?
Also, I am able to connect from the Mac Mini for example to my MBP and vice versa for screen sharing along with file sharing. Yet if she tries to connect to the Mac Pro from her MBP and vice versa it won't. It simply times out and will never connect for screen sharing or file sharing but yet the Finder shows the Mac Pro. We have a 2nd hard drive in the Mac Pro which is the one set up for file sharing. I am also unable to connect to the Mac Pro's HD. Everything appears to be set up correctly. For my MBP on the Finder it shows the Mac Pro but once again I am unable to connect to it for screen sharing or file sharing.
Also, not sure if it's related but even for her MBP she is unable to connect to it from any other computer in our network although it's set up for file sharing and screen sharing so I'm not sure if it's related to her logon ID. Then again as mentioned above neither of us can connect to the Mac Pro.
I tried to make the above sound as simple as possible. I am relatively new to networking and of course Leopard but even on the Mac Pro all settings sound the same as on the Mac Mini where we can both connect to. The only big difference is on the Mini we are connect to a USB external drive, on the Mac Pro an internal drive. Is there something I could have overlooked or are there known issues with Leopard's sharing features?
We both have .mac but since we are using this on an internal network (some wi-fi, some wired, all through an Airport Base Station Extreme) I would think this has nothing to do with Back to my Mac.
I appreciate any help with the above.

FaceTime doesn't do any of that, so I'll assume you mean Messages.
From the Messages menu bar, select
Video ▹ Connection Doctor
In the window that opens, select
Show: Capabilities
There should be a checkmark on the line with the words "1-on-1 video chat." Select
Show: Network Status
You should have two green dots.
Make sure that you and the other party meet the applicable requirements shown in these support articles:
Share your screen
Requirements for audio chats, video chats, and screen sharing
See also:
Fix video chat issues

I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appr

I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.

OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options

I am having problems using my iphone4 during calls. When any part of my facial skin touches the screen, it would either go mute, hold, speaker or whatever part my skin accidentally touches the screen.The other caller then cant hear me

I am having problems using my iphone4 during calls. The screen does not automatically lock to prevent any part of my skin or face from touching it. When my skin touches the screen it would either go mute, hold, divert to speaker phone or calls another in my contact list. The person i'm talking to then cannot hear me suddenly when in mute or hold. Is there any application for my iphone4 like a "screen lock" when it is being used on calls?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I have a consultation with you. Because my sister is updating the IOS8 Iphone 4S. Then was not able to use it. Random screen freezes apple.So bring your instruments to Restore Center. Machine can use it. But can not access .

Dear Staff
I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
Highly respected
Sarawut
My email: ********
<Personal Information Edited By Host>

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Can Photoshop CS6 be used with Interactive Display Screens?

Our High School uses large interactive display screens (Sahara Clevertouch) in each classroom connected to a mix on Windows 7 & 8.1 laptops and desktops.
We have the same problem with all of them that only seems to happen in Photoshop:
If you use a mouse or the trackpad on a laptop, even when plugged into the Clevertouch, then everything works fine.
If you then try using the touch on the screen as an alternative to the mouse, it detects the movement, but turns into panning mode (little white hand) rather than whatever tool you where using.
Bizarrely if you start the touch off the side of the page and move onto the page it draws the line correctly: the problem only occurs if the line (etc) starts on the page.
Can anyone let me know the setting I need to change to get Photoshop to behave normally?
Thanks
Philip Evans

Unlikely, but feel free to try using compatibility modes and al lthe otehr usual tricks.
Mylenium

Problem in enabling the selection screen

Hi ,
I have problem in enabling the selection screen.
i have radio button and based on the radio button i need to make the date field as mandatory.
When i tried this with at selection screen on radio button group XXX, itu2019s not triggering.
Could you please help me by resolving the above problem?
Vijay

Hi,
see the sap documentation
... RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields. If a function code used in the GUI status of the selection screen is specified for fcode, the selection screen processing is affected accordingly.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
Regards,
Venkatesh

Unusual problem using Arial Black font with #'s

We have encountered a rather unusual problem.
Recently one of our customers contacted us about a problem with their job. They used #'s in arial black and regular throughout their document. Everywhere the #'s were in Arial Black they came out looking like an entirely different font. All of the files that we have created from their document appear correctly. Even the proofs created from the files printed correctly. However at the point of Esko's Nexus program creating the tiff file to make the press plates we are getting the incorrect results. I have even created a new document using our fonts in multiple sizes and I am getting the same results. As you can see the rest of the text in the same font is imaging properly. It is only the #'s that are the problem.
This is a screen capture of the PDF I created:
This is a screen capture of the results from the plate tiff image:
I am positive that it is not an issue with Esko's Nexus software as I have recreated this text in Quark, Miccrosoft Word, and Microsoft Publisher and they all imaged properly.
I am only encountering this with Adobe software. I am getting the same results from both InDesign and Illustrator. I have run the file from multiple Macs with various OS systems and from a PC each with their own font sets. I have even run the file from all versions of InDesign that we own (CC2014, CC, CS6, CS5.5) and they ALL give me incorrect results. As you can see from the images above it is ONLY the # character in Arial Black that is a problem.
I'm at a loss as to how to solve this problem.
Larry Meirndorf
BRD Printing
Prepress Supervisor

Images of full font set:
Correct from Quark:
Incorrect from InDesign:

Z68a-GD65 (G3) Problems Using USB Bootable Tool 1.25g

I am having problems using the USB Bootable Tool 1.25g with the P77, P80, and P82 BIOS's. I have tried both modes 1 and 2. Both modes copy over everything successfully. When booting using the bootable USB drive, after copying the BIOS file via mode 1, the tool flashes a screen very quickly, then says BIOS updated successfully. This is not true, however, because nothing has been updated. I see something rapidly go 1-2-3-4-5, but the progress indicator I was familiar with with the old version of the USB Bootable tool does not show up, where the BIOS file was being copied block by block and took some time.
Mode 2 doesn't work either. I get the message "ROMFILE ROMID is not compatible with existing BIOS". This happened with all three BIOS's, using mode 2. I have tried the "Fix my USB Key" option, and have tried clearing the CMOS as described in the instructions on the forum. As a test, I used the M-Flash in the BIOS and was able to flash to P80. P80 is giving me problems with an Intel Management Mode HECI error which disappears when I start the PC, as well as me being unable to raise the base clock speed--even though it shows as raised in the BIOS and it saves the setting. I am now stuck with P80. Now I cannot flash to any other BIOS using the M-Flash utility, as it doesn't find the BIOS file I manually copied over to the drive. The USB bootable tool will not work.

I did use mode 1, although since I was having trouble, I used mode 2 also, after reading troubleshooting instructions for the USB BIOS tool. The archives I used were all ones I downloaded from the Beta BIOS thread I posted above.
The problems I was having with P80 were actually because I unknowingly was using the N20 BIOS because somehow my BIOS reverted to that. I have no idea how that happened, aside from that possibly being the failsafe BIOS as part of the dual bios system. Above, I meant to say that I flashed the BIOS through Windows when I had success with the P80 BIOS. The M-Flash utility does not read the BIOS files which are available on this forum.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen. I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it). The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

Are there any problems using a back cover.

I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

Is it ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

Problems using Oracle Sql Developer

Hello.
I am tryng to use the developer but I have serious problems using it. Lags, freeze, blocked screens, fatal errors without messages that make me close the application.
It is running on Windows 2000.
Somebody have this problems too?
Is this tool operative or is in beta state?
Thanks a lot.
Miguel De Belliz.
Argentina.

I executed a query & need to cancel the operation. However the busy cursor won't let me click Cancel (X) icon. Why ?
Also from time to time a simple operation of copy / paste freezes the screen and eventually comes back to life after 4/5 minutes. Why ?
Platform : Windows
Version : WinXP2002SP2
SQL Dev Version : 1.0.0.13.43
Build : MAIN-13.43
Java : 1.5.0_05
Oracle IDE : 1.0.0
Regards

Problem using NEW webcam...

OS win98SE.
Have successfully installed my new webcam Vista Plus Model: VF0090. I now have a problem using it!
As per instuctions, I go to WebCam Centre and press 'capture'. I then get a message along the bottom of the screen saying 'this device is not available, it may be used by another resource'.
I'm completely at a loss as to what the problem could be.
Any one out there who could help?
Regards
Sue

Got the same problem (1), in addition to the installer freezing (2).
(1) There seems to be a problem with the software - the driver is OK. I used it to record still pictures and movies with MS Photoeditor, Irfanview, WinTVCap and YahooMessenger.
I played around for hours at no avail.
---> Creative - fix that problem in both Cam Detector and WebCam Center!!!
(2) The Setup freezes, then when you kill it it comes up with a DOS window complaining about not enough resources (?!?!?!).
Work-around:
a - Run Demo.exe from the CD;
b - it asks for a *.dbd: look for "your region".dbd, e.g. europe.dbd
c - continue and it will install ...
However, do not know if the install process is correct, because of problem (1). My guess is that it is, and that the problems (1) and (2) are independent.
Again:
---> Creative - fix that problem in with the setup!!!
e.g., use a setup which is less "cool" but which is working.
Regards, Hans

Lasso tool problem, using alt key, no click within 5sec causes loss of active window focus

I have been using Photoshop since ver. 4 and have never seen this happen. The only difference is now I'm on Windows 7 64bit. Did not have this problem with XP. Current version CS3 Extended.
Problem: While using Lasso tool with the alt key if I do not make a mouse click in 5 seconds Photoshop's active window loses focus for a split second and then the first point of my selection and the last point will connect. Thus, wasting my time and my attempt at a selection.
I have task bar buttons to "Never combine". I see for that split second what appears to be another program button opening but it is so fast that I cannot see if there is a name on the task bar button. The current Photoshop button moves to the right and back too fast. This all happens very quickly as the window loses focus.
I first thought it was some another program but after many searches found nothing I can identify as the cause.
Right before posting this I had a thought and did a test that concluded in the 5 sec rule. For over a minute I held down the alt key and made a mouse click within the 5 second window of time and there was no loss of window focus. While still holding down the alt key in this same test but not making a mouse click within 5 seconds the window lost focus and the tool stopped with my selection.
I have a wireless Logitech M305 mouse that this morning updated the driver to its current version 5.20.51, Control Center version: 6.20.50.
I have not tested a wired mouse, yet.
Any help would be appreciated. Anyone else seen this? Windows 7 64 bit the culprit?????
Message was edited by: golfnut333

UPDATE
After I removed Photoshop from Norton 360's Administrative Settings_Silent Mode Settings_User-Specified Programs, I did not have the problem with the lasso tool that I first had with loss of window focus. I then put Photoshop back in the 360's settings and the lasso tool still worked, BUT...............
After a couple of days of not using Photoshop and turning computer on and off in that time, I tried Photoshop again and the same problem, it came back. Loss of focus after 5 seconds of not clicking mouse. So, once again I open Norton and took Photoshop out of the User-Specified Programs and the problem went away, no loss of focus.
So, I will see if after a couple of days of turning on and off the computer and NOT putting Photoshop in the Norton's User-Specified Programs setting if the problem stays fixed.
I don't have to have Photoshop in the Norton's setting I just thought that it would be a good idea so Norton didn't try to do any background processes or whatever while I was working in Photoshop or I was rendering a filter or something.
Another thought I also have the Full Screen Detection setting ON. I do use Photoshop in Full Screen mode so maybe when having both the Full Screen mode and User-Specified Programs setting selected it makes something go wacky.
Hope this helps anyone having the same problem I "did". Will post back after a few days to let you know if focus problem is gone.
If it does relieve the problem then I will leave Photoshop off the list in Norton. No sense in trying to fix something that really doesn't matter, really.
UPDATE 2
January 8, 2011, I tried the lasso tool again and it still appears to be working. I did my standard test of holding the alt key and clicking to make selections then not click for 5 seconds or more and I did not lose window focus. I do not know why the Norton 360 setting triggers the loss of focus but since I turned that setting off I'm not having any problem.
Will update again if something changes.
Anyone else out there with the same problem that was solved using this method?
Message was edited by: golfnut333

Problems using the Program Monitor

Dear Premiere users,
I recently bought Adobe Premiere CS3 and i'm having problems using the Program Monitor.
I cant see anything off screen. It just wont show anything if its outside the boundaries of the screen. I can adjust the zoom level but that wont change anything even if i set it to full screen.
Another problem I'm having is that it wont show motion paths or clip handles. Even if I make a motion path in the Effects Control window it wont show the path in the Program Monitor.
I really appreciate any advice on this because it drives me crazy. I already tried installing it again but that wont solve the problem.
Thanks in advance.
Greetings,
Peter

First of all I hope you are being sarcastic Jim. Sorry for being not that clear but I'm not stupid :).
Craig Howard is right. I thought that the Program Monitor was similarly to AEFX. But I suppose I was wrong on this one? So you cant get something to display outside the image area? If I place a clip outside the project dimension it just disappears in the Program Monitor.
And about the motion paths. I thought I read in the Premiere help files that they do show up in the Program Monitor. The topic says: "Adjust position, scale, and rotation" or "Animate motion in the Program Monitor ". There are pictures over there that show clip handles and motion paths in the Program Monitor. Clicking the effect wont do anything for me. Its like my video driver cant get them to show or something.
Edit: I found a tutorial here:
http://digitalproducer.digitalmedianet.com/articles/viewarticle.jsp?id=26660&afterinter=tr ue
They are dragging frames off screen and are using the handles and borders around the frame to adjust them. So I guess it should be possible, but how?
Thanks for the help.

Problem using ToolTip_Text on 2 screens

Similar Messages

Maybe you are looking for