Problem when restoring Backup from Tape...

Hi
I am getting the following error when I am trying to restore a backup from Tape on AIX system:
BR0279W Return code from 'LANG+C cd /oracle/RSD/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0': 0
BR0359W Restore of /oracle/RSD/sapbackup/.tape.hdr0 from /dev/rmt0 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0 failed
BR0236I Perfhaps volume initialization with option '-i force' required
I have initialized the tape before backup to label RSDB05 which I used while taking the backup.
When I initialized the tape as mentioned above with '-i force' then while restoring there is problem of timestamp.
How to restore the backup from tape now.
Regards
Chin2

Dear Ahamad,
In this command " brrestore -b xxxx.anf -m all -p /oracle/TRG/102_64/dbs/initSRC.sap " you are calling parameter file of source system initSRC.sap in which system is checking parameter/option 'compress_dir'. Please check if its same. Why you have replaced the SSID with TSID its not required at all.
Please follow these steps....
Place xxxxx.anf file in backup directory. check for parameters in initSID.sap file of TRG system. It should be the same as of SRC system.
Try again and post result if you are getting any error.
Regds
Anil

Similar Messages

RMAN error when restoring controlfile from tape

Hi,
We have a Production database with instance name PROD.
We use Symantec Netbackup software to backup this database to tape library.
We want to test some recovery scenarios on a test server. So we want to restore the production backups from Tape to this test server.
We did the following:
Cloned the ORACLE Home to the Test Server.
Changed the db_name parameter to PROD and also set ORACLE_SID to PROD.
then we connected to RMAN and ran the following command to restore the control files:
RMAN> run {
set dbid 4155532403
set controlfile autobackup format for device type 'sbt_type' to '%F';
set until time "to_date('16/12/2012:10:13:37','dd/mm/yyyy:hh24:mi:ss')";
allocate channel t1 device type 'sbt_tape';
SEND 'NB_ORA_SERV=riysvbkp-001,NB_ORA_CLIENT=lh-erp';
restore controlfile to '/testerp/dbexec/tmp/cf1.ctl' from autobackup;
executing command: SET DBID
database name is "PROD" and DBID is 4155532403
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
executing command: SET until clause
allocated channel: t1
channel t1: SID=171 device type=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 7.1 (2011082510)
sent command to channel: t1
Starting restore at 17-DEC-12
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 08:34:41
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <c-4155532403-20121216-01>
Here you can see that AUTOBACKUP is found but RMAN is unable to process the backup piece.
I am not able to see any errors in the log files. Please advise.
Thanks,
Muneer.

Thanks.
The earlier error is gone and now I am getting the following error:
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 14:34:25
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Backup file <c-4155532403-20121216-01> not found in NetBackup catalog

PSE 7 catalog error when restoring backup from PSE 5

I am attempting to move from PSE5 on XP to PSE7 on Vista using the backup-restore method, . Catalog is about 75 MB, data set is 56 GB, all stored on external USB drive. Tried restoring in new folder using both with and without restoring folder arrangement.
On PSE 5, most images were online, scattered across E: partition and external USB disk. Restoring to PSE7, files are all restored to a new directory OK, but new catalog lists all files in E: as offline. Let me repeat... the images are moved into a new folder on the new system, but are shown in the organizer as still on a non-existent E: drive on the new computer.
I am left with thousands of untagged images, all of them ther newest and most important in my system.

Mahlon,
First, some additional questions:
1. Did you do File > Catalog > Recover and File > Catalog > Reconnect before doing the backup? Thats very important.
2. On the old computer, was E: a partition on an internal drive, an external USB drive, or a network drive?
3. In the restored PSE 7 catalog, are the suspect thumbnails shown with a yellow question icon in their corner or a red circle icon with a line through it (like the international power symbol)?
4. When you say files are still recorded in the catalog as being on the E: drive, is that as shown in Folder Location view in the left-hand folder heirarchy pane, in the center Folder Location pane, in the Properties pane, or all three? (Check all three, because sometimes PSE will show different drive letters.)
> This will take a dozen hours on the old system, and I'm skeptical that it will work. PSE7 already converts the PSE5 database in or out of the restore. But it can't correct the pathname on the old system to indicate that the files are local and not offline.
Recovering the PSE 5 catalog, reconnecting missing files, installing PSE 7, and converting the catalog to PSE 7 on the old computer should take about 30-45 minutes (doing a second backup will take much longer).
Converting the catalog on the old computer is different than converting it on the new computer. PSE 7 has a different catalog format than PSE 5 PSE 5 uses drive letters to identify hard drives, whereas PSE 7 relies on serial numbers, and the internal database format is completely different. When you restore to the new computer and try to convert the catalog at the same time, the conversion needs to both update the new paths of all the files
and convert from the old catalog format to the new one, changing drive letters to serial numbers. But when you convert to PSE 7 on the old computer, the locations of files and drives havent changed its just changing the database format. So its entirely possible that conversion will go correctly. Then when you backup the PSE 7 catalog and restore it on the new computer, backup/restore is just changing the paths of files, not converting from drive letters to serial numbers or changing database formats.
So thats why its quite possible (though not at all guaranteed) that converting to PSE 7 on the old computer and then doing backup/restore could produce different results different process, different results.
You have two other options, both of which might lose tags or other catalog information:
1. On your new computer in its current state, reconnect all the files in the catalog to their new locations. Because they are marked as offline (assuming they actually are offline, based on the answers to my questions above), the Reconnect command will tell there is nothing to reconnect. However, you can force PSE to reconnect offline files using a trick described in step 4 of this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Quickly_reconnecting_la rge
This may or may not work, because its likely that the buggy conversion process has left your catalog in an inconsistent, unknown state, and there may be other problems still lurking. Also, persuading PSE to quickly reconnect whole folder hierarchies of files takes some patience (as youll see in the FAQ).
2. You can merge the PSE 5 catalog into a fresh PSE 7 catalog using this procedure: In PSE 5, save the tag definitions to a file, use File > Write Keyword Tag to write the keyword tags to the photos, copy the tag-definitions file and all the photos to the new computer using Windows Explorer, import the tag definitions into a fresh PSE 7 catalog, import the copied photos, and finally have PSE 7 automatically stack photos that used to be in version sets into stacks. These steps are described in detail in this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Merging_Catalogs
This FAQ is written assuming the source catalog is in PSE 6 or 7, but I think it should also apply to a source catalog in PSE 5.
There are a number of problems with this. First, its time consuming. Second, youll lose version sets, stacks of photos that are *not* visually very similar or taken close together in time, collections (albums), and projects. The PSE File > Write Keyword Tag command has numerous bugs (in all versions), and youll most likely lose at least some, and perhaps much, of your tags, star ratings, captions, notes, dates/times, and GPS/map locations. If you have raw files in particular, youll very likely lose much or all of the metadata, but depending on the source of your JPGs and other file formats, those files could lose much information too. See the end of this FAQ for more details on the known bugs:
http://www.johnrellis.com/psedbtool/#_Writing_File_Metadata

Problem while restoring backup from the pc to the ...

hi all
today i make two backups of my phone ( nokia XpressMusic 5730 Symbiyan 60 3rd) and then i restore all original phone settings using *#7370#
after that i tried to recover the back up from the pc
but after it finished restoring the backup and the mobile restarted nothing is back !
please help it is very important data
im using Nokia Pc Suite 7.1.180.94
my computer works on windows 7 ultimate service pack 1
and the backup is .nbu file

the backup content msgs and notes and calender

How do I prevent icloud from overwriting my contacts when doing a restore backup from PC to iphone?

My icloud contact list is screwed up. I have my contact list in my PC backup. I've removed icloud from iphone AND changed apple ID and icloud ID, yet when I attempt to restore backup from PC to iphone, my correct contact list shows up momentarily, then reverts to the screwed up icloud contact list.
I understand that my PC backup is set to connect to icloud; however, one would think by removing the email address associated with apple or icloud that it would not be able to connect to icloud when I do a restore backup from PC to iphone. Yet each time I find icloud connected via my old email address after attempting the restore.
How do I fix this? This seems like an icloud bug, since it connects via my old email/ID.

The problem may be that the iphone is immediately syncing with icloud and losing the newly restored data. You might turn off your router. Once restored, turn off icloud on the device, turn on the router, then turn on the iphone.
(I'm going by memory on this, and that hasn't been too reliable lately.)

When I turn on my new iPhone 5s, I have to select a language and county and then my only options are to restore backup from iTunes or restore from iCloud. I have already restored form iTunes, so what am I doing wrong?

When I try to turn on my new iPhone 5s, the ONLY options it gives me is to either backup from the iCloud or restore backup from iTunes. I have already restored the backup from iTunes, so I don't know why it keeps telling me to restore the backup. And why won't it give me any other options? I can't text, call, etc. My phone will do NOTHING.
Any suggestions?

It seems you restored from a blank back up if it is still asking you to choose one of those options. Set it up as new then manually restore from back up with iTunes on your computer and be sure to check the date of the back up an which phone the back up is from.

Restore FRA from tape backup

I have got a 2 node RAC cluster.
I am running RMAN backup connecting to one of the nodes and then running RMAN backups to FRA.
Since I cannot backup ASM to tapes just like a normal file system, I have configured the MML to backup the FRA to tapes using "backup recovery area" command.
The FRA backup to tapes is successful.
Now if ever I need to restore / recover the database, how do I restore my backups from tape.
ie: I dont see a command to say -> restore recovery area , which will restore the backups to FRA.Or is there a way ?
If it cannot restore , then what is the point of backing up the FRA to tapes using the above command.
Any thoughts ?
AU

Just try to restore database/tablespace/datafile using usual RMAN commands: RMAN will check if FRA is used and check if related backup is on disk or on tape. If backup is on tape, RMAN will read it using Media Manager Layer (MML) in a transparent way.

Restore the backup from tape to some other server

Dear All,
I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
Regards,
Kumar

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

Restore RMAN backup from tape

I have to restore the RMAN full backup from tape to new host to a previous date say March 1st. My target database RMAN retention period is 28 days, today is 11th May.
Is it possible to restore the obsolete database from tape backup to new host as of May 1st. If not possible, I would like to restore the available backup say as 15th April from tape to new host.
Can you please provide me the steps to restore the tape old backup to new host.
Thanks,
Mahi

Can't read documentation? You also seem to be unable to mark questions as answered
Mahi
     Newbie
Handle:      Mahi
Status Level:      Newbie
Registered:      Nov 24, 2010
Total Posts:      24
Total Questions:      15 (13 unresolved)
Sybrand Bakker
Senior Oracle DBA

Hard disk crashed, restored data from tape backup, Firefox not showing bookmarks. What is the location of bookmarks & favourites to ensure I have restored the correct file?

Hard disk crashed (XP), restored files from tape backup using Retrospect onto new Windows 7 laptop. Started up Mozilla after restore but bookmarks and favourites are missing.
I still have access to the backup tape and files. I was wondering whether the bookmarks are kept anywhere special other than the Mozilla program file that I restored.

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

When restore iPhone from backup, why it copying every single app

when restore iPhone from backup, why it is copying every single app from library? any way to restore whatever was backed up from iPhone?

How to restore from backup without sync all my apps? I recently upraded firmware to IOS 7, and then tried to restore from my privouse backup. But it everytime, when it's saying you are successfully restored. but I when I unlock my phone all app icon are dark gray color, means nothing restored and then itunes automactically copying all my app to iPhone like 100+ apps, I dont need all of them.
Again, How to restore from backup without sync all my apps?

TS3682 when i want to restore backup from icloud this message will appare on my iphone 4s *move your mobileme account to icloud* whats mainig of this messave?

when i want to restore backup from icloud this message will appare on my iphone 4s *move your mobileme account to icloud* whats mainig of this message?

Apple has shutdown MobileMe. You have to switch over to iCloud.

Cannot restore backup from iCloud after rolling back from iOS 8

So, after trying iOS 8 on my iPhone 4s I decided there was too much lag to apps opening, etc.
I downloaded the iOS 7.1.2 firmware and got it back, after backing up to iCloud.
Now all I get - after trying probably 250 times over the past day - is 'Cannot restore backup' from any of the backups from the past three days.
Is it being blocked because iCloud recognises it as not being the latest iOS?
Any thoughts?
Thanks in advance for any help

I have the same problem with an iPhone 4 with iOS 5.1.1, I'm trying to restore my iPhone with a backup made with iCloud (when I made the backup 2 weeks ago I had the same iOS version, 5.1.1).
The error message is: "Cannot restore backup" which is NOT listed here: http://support.apple.com/kb/TS4036
I need some help with this, thanks.

How to restore backup from different device

Hallo... seems I have problem with downloading backup from my older ipad mini (16gb) into newer ipad mini retina (32gb)... during the first setup it aksed me if I want to restore backup from older device, but since my older ipad and its backup was on ios 8.0.2 and newly purchased ipad was still on 7.1.2 i needed to skip this and upgrade os first. now I have new device set up and running ios 8 but I can not get into it backup from older device. what to do?

Resetting the iPad back to factory defaults should take you to the setup process and let you restore to an iCloud backup : Settings > General > Reset > Erase All Content And Settings
Back up and restore your iOS device with iCloud or iTunes :
You can go through the iOS Setup Assistant again by erasing all the content on the device. Just tap Settings > General > Reset > Erase All Content and Settings. This will remove all content from your device, so do this only if you already have a backup. The iOS Setup Assistant is the only way to restore a backup.

Problem when restoring Backup from Tape...

Similar Messages

Maybe you are looking for