Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Similar Messages

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Error while tansporting the Data Source & Transformation

Dear Experts,
I stuck in one problem. I just tried to transport one data source & its transformation fron BWD to BWQ. After importing the request, it throws an error (mentioned below):
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Password logon no longer possible - too many failed attempts
Error when activating DataSource ZMAT_MAPVL RQ1CLNT400
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS ZMAT_MAPVL RQ1CLNT400 does not exist
Also i check the same data source on R/3 system where it is available in activated form. I also replicate the same & tried to transport it again on BWQ but still the same.
Please help me out.
Thanks in advance
Neha

Hi,
Did you check the 'Conversion of logical system names' option?, whether your source is mapped to correct R3 system?. If not please check and map with the correct R/3 Quality system and sometimes there may be more than one R/3 system connected to quality, if so remove the wrong one.
For Password logon no longer possible, please check your RFC connection(SM59) by selecting the option Remote logon, it shd give you the error. As background user got locked it seems. Please check.
Thanks,
V.Senthil
Edited by: Senthilkumar Viswanathan on May 10, 2011 7:21 AM

Error while activating the Data in DSO

Hello,
We moved huge amount of FI data from datasource to DSO. After moving all the data, we tried to activate the data. But the mistake we did is we activated all the requests at one go. (my assumption) It turned all the request to Red. The job log says SQL error.
Is there any way of solving this issue without deleting the data. Data load will take too much time and we would like to avoid it if possible.
Waiting for inputs!!!
Regards,
Abhishek

yes a Dump was triggered.
Database error text........: "ORA-12801: error signaled in parallel query
server P007#ORA-01652: unable to extend temp segment by 2560 in tablespace
PSAPTEMP"
Internal call code.........: "[RSQL/FTCH//BIC/AYEPSPFI140 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_RSODSO_ACTIVATE_REQUESTS===CP" or "CL_RSODSO_ACTIVATE_REQUESTS===CM00D"
"ACTIVATE_DATA_FROM_QUEUE"
Edited by: Abhishek Nishis on Oct 12, 2009 10:54 PM

Error while creating the data source

hi
iam creating generic data source using function module.
i inserted the function module and structure name,
when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
please guide me how can i overcome this
treat this is as urjent requirement
regards
kumar

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while activating the data into DSO

Hi
My base DSO is used to load 4 other data targets.
In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
When loading to other DSO, We have encountered an error
Object is currently locked by BI Remote
Lock not set for : Activating data in DSO
Activation of M records terminated.
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
2. What difference does it make when loading DSO to DSO and cube parallel?
Thanks
Annie

Hi Annie.....
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
Is any further targets getting loaded from this 2nd level DSO ?
Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
So check it and atart the activation again..
2. What difference does it make when loading DSO to DSO and cube parallel?
The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
Regards,
Debjani....

Error while Activating the Info Source.

Hi Gurus,
We are in BI7 & SP14.
Here I am Activating the Infosource "0CO_OM_OPA_2" which i already assign the datasource "0CO_OM_OPA_2" to "0OPA_C11"Cube.But i am getting the following error message "Data element for InfoObject KOKRS 0CO_AREA could not be created".
Here the whole flow i am doing in old version(3.5).
Any one can help me to solve this issue.
Thanks
Raju.k

Please check your Infoobject is active or not. Even it is active please reactivate and check once again.

Re: Invalid Type CURR while activating the data source from R/3 to BI 7

Dear Expert,
I have created a data source using function module and has it successfully replicated in BI 7.
But when I try to activate it, I run into the problem associated with "Invalid Type CURR" with two of the CURR fields.
Could you help me to resolve this problem or provide me with some suggestions?
Thanks and appreciated.
Arthur

In SAP BW 7.0 Currency types are managed via transaction RSCUR.. Perhaps you should check if everything is ok (i mean to check if the Currency Types are transported) before to active your DataSource.
It's only a suggestion .. good luck !

Error while changing the data source at runtime

Hi All,
I want to change the DB connection(from Dev to QA) in the code before viewing it to the user. I browsed through the samples and found a code. But when I', trying to use the code, I'm getting the following error.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon Error: invalid arguments in call---- Error code:-2147217393 Error code name:dbLogonFailed
The following is the code:(Bold - problem area)
private static void switch_tables(DatabaseController databaseController) throws ReportSDKException {
final String DBUSERNAME = "irs_tin";
final String DBPASSWORD = "monica30";
final String SERVERNAME = "n3qvdb999.1dc.com";
final String CONNECTION_STRING = "Use JDBC=b(true);Connection URL=s(oracle.jdbc.OracleDriver://n3qvdb999.1dc.com:1631);" +
                                                   "Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(n3qvdb999.1dc.com);" +
                                                   "User ID=s(irs_tin);Password=;Database=s(IRSQA);Trusted_Connection=b(false);" +
                                                   "JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;" +
                                                   "DatabaseName={database};user=;password=!)";
final String DATABASE_NAME = "IRSQA";
          final String URI = "!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;DatabaseName=;user=;password=!";
          final String DATABASE_DLL = "crdb_jdbc.dll";
          Tables tables = databaseController.getDatabase().getTables();
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
               //Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
IConnectionInfo connectionInfo = table.getConnectionInfo();
PropertyBag propertyBag = new PropertyBag();
propertyBag.put("Trusted_Connection", "false");
               propertyBag.put("Server Name", SERVERNAME); //Optional property.
               propertyBag.put("Connection String", CONNECTION_STRING);
               propertyBag.put("Database Name", DATABASE_NAME);
               propertyBag.put("Server Type", "JDBC (JNDI)");
               propertyBag.put("URI", URI);
               propertyBag.put("Use JDBC", "true");
               propertyBag.put("Database DLL", DATABASE_DLL);
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);table.setConnectionInfo(connectionInfo);
databaseController.setTableLocation(table, tables.getTable(i));
Thanks for your time.

Hi Guys,
I managed to fix my problem.
I have used the method in the utility class at this location:
http://code.google.com/p/struts2demos/source/browse/trunk/Struts_Demo_ThirdDemo/src/com/businessobjects/samples/JRCHelperSample.java?r=4
-Anil

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Error coming while activating the data request at DSO level

Hi to all,
please can anybody tell me the solution for that.
While activation the data request at DSO level , i am getting error .
Value 'R2S-11.60UML ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
Process 000001 returned with errors
this error is coming under SID Generation .
I shall be thnakfull to you for this.
Regards
Pavneet Rana

Hi Rana,
Activation failed because of the special characters in the Omaterial
Delete the request in target
edit it in the specific record in PSA and load it back
In your case i think its a space problem u can see a space after L
delete the space for the record and load it again
Regards,
MADhu

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error while activating the data source.

Similar Messages

Maybe you are looking for