Problem while adding XL-Reporter
hi All,
i added the Addon XL-Reporter on the client side and when i started teh Addon , i'm getting that class not registered,Presently i'm using the SBO20042B SP00 PL00
can anybody help me.
Thanks & Regards
shiva shanker.
No it doesn't. That code cannot possibly give any errors. JNDI doesn't work like that. The error happened later on when you sent the attributes to the LDAP server. Please post the complete exception and stack trace and the code to which the stack trace refers, indicating clearly exactly which line of code threw the exception.
Similar Messages
-
Problems while generating the report........
Hi Experts,
I have genereated a new report on purchasing data, I am facing bellow problems while generating the report,
1) In rows one Invoice doc num is there, I am not getting result row for this object, I have given NEVER in supress result rows in properties of that object, but it's not showing.....how can i get result row for this object?
2) I am getting '#' for the blank values, How to remove these '#"s
Please help to solve my above problems,
Helpful answer will be awarded with points,
Thanks in advance,
Venkat.Hi,
1) If you have only Invoice Num it does not shows the result Row .
2)If you display the characteristics as Key u will get as '#'. You can select as Text,then it will show 'Not Assigned'. (Hope you know that when the Values not updated from Infoprovider then # appears at output )
Hope it helps -
Bold 9000: problem while adding email address to TO:
Hi Guys!!
I am facing a problem while adding email addresses (whcih are already stored in my BB Bold 9000). while adding "To: or CC:" only 1 email stored contact is displayed. others are not.
please help me some solution.
regards
Thanks & regards
Ajay JainIf I understand you correctly, while adding email addresses to any particular email IDs you're can't see multiple email IDs. Email addresses are stored under the contact names. You can save multiple email address under one contact. Now while putting name in To/CC field you should be typing the names of the contact and when pressing/selecting names you would be prompted with multiple email addresses.
Try this -
When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which minor issues with the BlackBerry device.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1
Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
SunnyHi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang -
Problem while exporting a report using CSV
Dear friends / experts ,
after successful genration of report my end users want to export that report i.e
while exporting a report in portal using " Export CSV" option , am getting CSV file as semicolon ( seperated instead coma(,)
please help me where can i change those settings to achive this CSV file with coma separated.
thanks in advance..
regards
anandCheck the below link
http://help.sap.com/saphelp_smehp1/helpdata/en/d2/11a28fc26d4042a6d230a9783152f2/content.htm
[Steps to change the delimiter in csv export WAD or portal|http://forums.sdn.sap.com/thread.jspa?threadID=1988651]
To set the field separator, go to SPRO and choose
-> SAP Reference IMG
-> SAP Customizing Implementation Guide
-> SAP NetWeaver
-> Business Intelligence
-> Links to Other Source Systems
-> Connection Between Flatfile and BI System
-> Set options for uploading flat files
Regards
KP
Edited by: Konduru Prashanth. on Feb 29, 2012 3:13 PM -
Problem while adding subscreen in MM02
Hi all,
Thx for ur reply bur while adding the subscreen in my custom program(mm02) saplzmgd1 , what shall i write in the PBO and PAI event?
or shall i copy the existing screen n make modifications ther?
what if i have to add another field of my own in the existinh subscreen added to mara by append structure, in that case, what shall be ther at PBO and PAI ??
Regds
GunjanThe whole procedure what to do is described in detail in the IMG:
e.g.
PBO:
MODULE INIT_SUB.
MODULE GET_DATEN_SUB.
MODULE FELDAUSWAHL.
MODULE SONDERFAUS.
MODULE SONFAUSW_IN_FGRUPPEN.
MODULE FELDHISTORIE. "Aenderungsdienst
MODULE BILDSTATUS.
MODULE ZUSREF_VORSCHLAGEN_B.
MODULE REFDATEN_VORSCHLAGEN.
MODULE ZUSREF_VORSCHLAGEN_A.
MODULE INIT_SUB_1000. "YOUR CODING
MODULE SET_DATEN_SUB.
PAI:
MODULE GET_DATEN_SUB.
Start YOUR CODING
FIELD: MARC-....
MODULE MARC_...
MODULE OK_CODE....
End YOUR CODING
MODULE SET_DATEN_SUB. -
Problem while adding both Key And Focus Listeners to JTextField
Hi!
I have something peculiar while adding Key and Focus Listener to JTextField. Suppose i add just Key Listener then everything's fine and i could keep track of keys being pressed. But as soon as i add a Focus Listener to it with the code to select full text in focusGained() method, it starts reponding wrongly to arrow keys pressed and does not perform desired actions. For let arrow key it moves caret by one for the first time after that it does not resond to that unless caret is changed by using mouse. If right arrow key is pressed the it moves the caret to last position from wherever it is. For UP and DOWN it selects the full text(This should be done when it gets focus)
public void focusGained(FocusEvent fe)
setCaretPosition(0);
moveCaretPosition(getDocument().getLength());
Can someone help me out on this?
thanks and regards,
Amit.None of those things will cause your JFrame to resize itself. And this is probably a good thing, because your JFrame shouldn't change size once you have created it. Why not create your JPanel so that it has enough space for you to add the component later? Or why not just add the component to start with and then enable it or make it editable when you decide that's necessary?
-
Problem while adding a free attribute to a report,
Hi,
When ever I try to add a free attribute to a report, my screen continues to show a hand when I click and drag. I do not get a vertical black line to indicate the target destination if I am adding a column. I am doing this from Portal.
If I am deleting I do not get a black cross after I have clicked on and dragged a column to the outside of the report. I just continue to see the hand.
When ever I try to add or delete free attributes, the screen does not reflect my actions, so I do not know whether the change is eing processed.
Can somebody give a headway on this please.
Thanks in Advance !!Hi
Thanks for the reply,
I already have BI Add on Installed on my GU 7.10.
Moreover, i am accessing this report through EP.
Thanks !! -
Facing problem while adding combobox using gridbaglayout
HI, I have used gridbaglayout in my panel. after adding the gridbaglayout, if i select long value combobox does't display all the value of the selected value. Why?
This is my code
cboPrioritySearchValue = new JComboBox();
cboPrioritySearchValue.setBackground(Color.white);
cboPrioritySearchValue.addItem("ALL");
cboPrioritySearchValue.addItem(Priority.NOT.getValue());
cboPrioritySearchValue.addItem(Priority.ONE.getValue());
cboPrioritySearchValue.addItem(Priority.TWO.getValue());
cboPrioritySearchValue.addItem(Priority.THREE.getValue());
cboPrioritySearchValue.addItem(Priority.FOUR.getValue());
setConstraints(gbc,gbc.WEST,gbc.NONE,2,1,2,8,new Insets(2,5,5,5),0,0,0,0);
gbl.setConstraints(cboPrioritySearchValue,gbc);
panel.add(cboPrioritySearchValue);This is my setConstraints method,
public GridBagConstraints setConstraints(GridBagConstraints gbc, int anchor,int fill,
int gridw, int gridh, int gridx, int gridy,
Insets insets, int ipadx, int ipady,
int weightx, int weighty)
gbc.anchor = anchor;
gbc.fill = fill;
gbc.gridwidth = gridw;
gbc.gridheight = gridh;
gbc.gridx = gridx;
gbc.gridy = gridy;
gbc.insets = insets;
gbc.ipadx = ipadx;
gbc.ipady = ipady;
gbc.weightx = weightx;
gbc.weighty = weighty;
return gbc;
}Edited by: JavaHeroPrince on May 13, 2010 6:58 AMThanks Pete, hopefully its only a temporary problem.Short answer: It is (well ... hopefully).
Long answer: My server's dying regularly because all the connections fill up in CLOSE_WAIT states. This doesn't seem to have the same root cause as the reported bugs that I can find (issues with older JDKs) so I'm interested in investigating it beyond just upgrading everything to the latest and crossing my fingers. Unfortunately that will take time and I'm a bit pressed for spare time at the moment - so: my apologies; the domain is likely to be down until after the weekend at least.
After the weekend I'll re-target sscce.org (and .com and .net which I acquired a little while back) to a different server that's not suffering from the problem. Or if Andrew prefers I'll target a server under his control. -
Lock Problem while Broadcasting multiple reports using process chains
Hi All,
I am trying to broadcast 10 reports using the process chains using the program for RSRD_START and variants created in the Broadcaster..the Program jobs start fine.But I am facing the error that the RSRA_CA_LOG table is getting locked while trying to broadcast the Reports..Can any help me on how to run the jobs without the locking problem..Suggestions please.
Thanks,
Mike.Hi,
Thanks for the Inputs and the SAP Notes.
I am trying to broadcast the Reports from the the Bex Analyer and getting this ock error and not the workbooks.
I am also trying to Broadcast the Workbooks also, but could not find the options to Broadcast them. we are in SAP -BW3.5 SP 12, Is it possible to broadcast the workbooks in this Patch level..or do we need to upgrade to achieve this.If so...can any one provide me the proceedure to Broadcast the Workbooks.
Thanks,
Mike. -
Problem while running the report from stored procedure
Hi,
I using stored procedure to generate my report.
my stored procedure's code looks like this.
CREATE OR REPLACE PROCEDURE PROJECTOVERVIEWREPORT1(query in VARCHAR2)
IS
myPlist SRW_PARAMLIST;
myIdent SRW.Job_Ident;
myStatus SRW.Status_Record;
BEGIN
srw.start_Debugging;
myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
srw.add_parameter(myPlist,'GATEWAY','http://localhost:8888/reports/rwservlet');
srw.add_parameter(myPlist,'SERVER','rep_kalyan1');
srw.add_parameter(myPlist,'REPORT','BillFormat.RDF');
srw.add_parameter(myPlist,'USERID','atl3_dev_jul04/atl3_dev_jul04@mgi');
srw.add_parameter(myPlist,'destype','file');
srw.add_parameter(myPlist,'desformat','pdf');
srw.add_parameter(myPlist,'documentnumber','17181');
srw.add_parameter(myPlist,'papertype','N');
srw.add_parameter(myPlist,'desname','c:\temp\17181.pdf');
myIdent := srw.run_report(myPlist);
myStatus := srw.report_status(myIdent);
srw.stop_Debugging;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
NULL;
END PROJECTOVERVIEWREPORT1;
Iam running the oc4j instance and the report server in my local machine.
when i have typed http://localhost:8888/reports/rwservlet
Iam able to see the help page.
My rdf file is placed in OralceHome/reports/integ folder.
Iam executing my stored procedure it is returning some error.
Iam doing any thing wrong.
Do i need to modify anything.
Is the place of rdf file correct.
plz help me solving the above problem.
--KalyanThis is the error message iam getting..
any idea????
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 *
* Debugging turned ON *************************************
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://localhost:8888/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_kalyan1
*** Length of Paramlist : 3
OK : Parameter added : REPORT=BillFormat.RDF
*** Length of Paramlist : 4
OK : Parameter added : USERID=atl3_dev_jul04/atl3_dev_jul04@mgi
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=file
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=pdf
*** Length of Paramlist : 7
OK : Parameter added : DOCUMENTNUMBER=17181
*** Length of Paramlist : 8
OK : Parameter added : PAPERTYPE=N
*** Length of Paramlist : 9
OK : Parameter added : DESNAME=c:\temp\17181.pdf
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built : http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statu
*** Submitting HTTP Request
*** using URL :http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statusf
ERROR : HTTP request failed -
UNIQUE PROBLEM WHILE CHANING STANDARD REPORT
Hey guys,
I am adding few coloumns to exsisting ALV GRID(in a standard report which is developed for printing GL account detials of vendors)
But the problem is,the cloumn in position 12,comes again in position 13...
the original report has 12 coloumns,i added 8 more columns..
but the cloumn in 13 has same values as in 12..
why is it happening?how can i corecT?NAH,
i checked rechecked....
hasnt got to do anythign with structure of FC..
peculiarly,no matter what,the coloumn in 13 gets effected this way...
i.e if i try to hide the coloum creating problem,the coloum which replaced it behaves the same way...
i.e vlaues in coloumn 13 = vlaues in coloumn 12 no matter what.
intrestingly if i change reuse_alv_list_display to grid_display..
this paticular problem doesnt arise...
however i cannot display grid..i ahve to display list.. -
Facing problem while creating a report on the value of a UDM in oem gc
Hi,
I have created a report in OEM grid control. I have selected a host for this. And I have selected an UDM from the metric list. The report works fine shows the correct graph in the report.
The problem is that along with the value from the respective udm , I am also getting the values from other metrics.
Between, I also noticed that the metric I selected is not highlighted when visited next time to the report edit page. I guess this could be the cause but dont know how to fix it. May be I am wrong, If any other issues or suggestions to my problem , Please Advise.
Thanks in advance.It is 10.2.0.5. I guess it is a bug but where to check for confirmation.
Thanks.
Edited by: Kuldip on Jul 22, 2010 11:15 PM -
Problem while calling a report from the report
Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regardsThanx,
I have solved this problem.
Regards,
Hafeez -
Problem while adding a new dimension in a existing cube with data in BW3.5
Hi,
We are trying to create a new dimension with new characteristics in a existing cube. But while activating we are getting error that "InfoCube contains data; intentional changes not permitted". Can we add a new dimension in a existing cube with data in BW3.5? If it is not possible then we can take the backup and delete the data from cube and then change the cube. But my question is that, when we will transport the cube with changes to quality then will it transport successfully or same procedure needs to be done there as well.
Regards,
Saikathi,
Adding new infoobject /dimension to the cube containing data in 3.5 is not possible.
easier solution is create a new cube similar to old and add the new dimension and proceed.
else you have to drop data and transport.
Ramesh
Maybe you are looking for
-
Problem with HP printer and Network
I recently purchased a MacBook Pro and HP 8600 wireless printer. I'm using an airport extreme base station. I'm having trouble with network connectivity and wondered if the printer is the culprit--many times after printing, I lose my network connect
-
I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library. I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can. I can't a
-
How to produce a sound whose intensity depending on the amplitude of a signal?
i am acquiring some signal. each time the signal reach a value (e.g. 0.5 V) i want my application to emitt a sound. that's what i did for now but i wish i could make the sound intensity depending on the amplitude of my signal? thanks for your help gu
-
Type casting an array as element
Hello all, I'm relatively new to labVIEW and I would like your help with something. Let us say I have an array of two I16 elements. I would like to type cast it into one single U32 element. In C, I could simple read it as a U32 or use pointers to get
-
When I try to scan from my printer it does not connect
When I try to scan from my printer I get a message "Cannot find HP deskjet 3050 j610". But i can print from it and get printer data like ink supply. This started abruptly today. It was working OK until a couple days ago. The printer is connected by