Problem while loading kernel image through Jtag (on ZEDBOARD)
Hi all,
I am trying to boot kernel image on the Zedboar via Jtag.
But while running the "run netboot" i am getting the following error
"wrong image format for bootm command"
ERROR: can't get kernel image
I just enclosed the console Screenshort.
I am requesting to suggest some solotion for the above problem.
Try re-building the image and see if that helps.
Can you try booting the image using bootm commands and see if you are able to boot?
Example:
uboot> tftpboot 0x1000000 /tftpboot/image.ub
uboot> tftpboot 0x2000000 /tftpboot/urootfs.cpio.gz
uboot> tftpboot 0x3000000 /tftpboot/system.dtb
uboot> bootm 0x1000000 0x2000000 0x3000000
For details steps refer to details in the link
Regards,
Achutha
Similar Messages
-
Error While loading a image from database
Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
NatsHi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!. -
Problem while loading data from ODS to infoobject
Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savioHi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier. -
Problem in Loading Multiple image in Single Sprite/MovieClip
Hi All,
I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
Here is the ImageLoader.as class
package com.project.utils{
import com.project.*;
import com.project.utils.*;
import flash.events.EventDispatcher;
import flash.display.MovieClip;
import flash.events.Event;
import flash.events.ProgressEvent;
import flash.display.Loader;
import flash.events.IOErrorEvent;
import flash.net.URLLoader;
import flash.events.MouseEvent;
import flash.net.URLRequest;
import flash.display.Bitmap;
public class ImageLoader extends EventDispatcher {
public var imgloader:Loader;
public var imgMc:MovieClip;
public var imgObject:Object;
public var loaded:Number;
public function ImageLoader():void {
imgMc = new MovieClip();
imgObject = new Object();
imgloader = new Loader();
public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
imgMc = new MovieClip();
imgObject = new Object();
imgloader = new Loader();
imgMc = imgHolder;
imgObject = imgObj;
imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
imgloader.load(new URLRequest(imgObj.FilePath));
private function onImgLoad(Evt:Event):void {
var image:Bitmap = Bitmap(Evt.target.content);
try {
imgMc.removeChildAt(0);
} catch (error:Error) {
imgMc.addChild(image);
try {
if (imgObject.URL != undefined) {
imgMc.buttonMode = true;
imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
} catch (err:Error) {
dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
private function onImageClicked(evt:MouseEvent):void {
trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
private function onImgLoadProgress(Evt:ProgressEvent):void {
if (Evt.bytesLoaded>0) {
loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
private function onImageLoadFailed(Evt:IOErrorEvent):void {
trace("Image Loading Failed");
dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
for (var i=0; i < 3; i++) {
//imgLoader=new ImageLoader;
imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
target.list_mc.visible=false;
var imgObj:Object=new Object;
imgObj.FilePath=list[i].Thumbnail;
imgObj.Url=list[i].Url;
imgObj.Target=list[i].Target;
target.list_mc.urlObj=new Object ;
target.list_mc.urlObj=imgObj;
imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
target.list_mc.imgholder_mc.buttonMode=true;
target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
mcCount++;
In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
See at the same time, If i uncomment onething in the for loop that is
//imgLoader=new ImageLoader;
its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
So, help to get rid out of this problem.
Thanks
-Varunpackage com.project.utils{
import com.project.*;
import com.project.utils.*;
import flash.events.EventDispatcher;
import flash.display.MovieClip;
import flash.events.Event;
import flash.events.ProgressEvent;
import flash.display.Loader;
import flash.events.IOErrorEvent;
import flash.net.URLLoader;
import flash.events.MouseEvent;
import flash.net.URLRequest;
import flash.display.Bitmap;
public class ImageLoader extends EventDispatcher {
public var imgloader:Loader;
public var imgMc:MovieClip;
public var imgObject:Object;
public var loaded:Number;
public function ImageLoader():void {
// better add you movieclip to the stage if you want to view anything added to it.
imgMc = new MovieClip();
imgObject = new Object();
imgloader = new Loader();
public function loadImage(filepath:String):void {
imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
imgloader.load(new URLRequest(filepath));
private function onImgLoad(Evt:Event):void {
var image:Bitmap = Bitmap(Evt.target.content);
try {
imgMc.removeChildAt(0);
} catch (error:Error) {
imgMc.addChild(image);
try {
if (imgObject.URL != undefined) {
imgMc.buttonMode = true;
imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
} catch (err:Error) {
dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
private function onImageClicked(evt:MouseEvent):void {
trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
private function onImgLoadProgress(Evt:ProgressEvent):void {
if (Evt.bytesLoaded>0) {
loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
private function onImageLoadFailed(Evt:IOErrorEvent):void {
trace("Image Loading Failed");
dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
for (var i=0; i < 3; i++) {
var imgLoader:ImageLoader=new ImageLoader();
imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
target.list_mc.visible=false;
var imgObj:Object=new Object;
imgObj.FilePath=list[i].Thumbnail;
imgObj.Url=list[i].Url;
imgObj.Target=list[i].Target;
target.list_mc.urlObj=new Object ;
target.list_mc.urlObj=imgObj;
imgLoader.loadImage(pass the image file's path/name);
target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
target.list_mc.imgholder_mc.buttonMode=true;
target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
mcCount++; -
Error message while opening a project: "an error was encountered while loading the image"
We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Problem while loading applet in opera- very urgent please
hi,
I am having problem while loading applet in opera browser. Showing "Applet loading " continuously. I am trying to use URLConnection to read information from applet's own host. I cant find the exact problem what is happening, Since there is no error message in browser Javaconsole.
If anybody have idea on this please help me. I am in great hurry.
Thanks in advance.
Rao. Vhi this is rao,
I inserted a lot of System.out statements throughout applet life cycle. But they are not displaying in java console. I think the problem is in Opera-java settings. Since i am new to the opera environment i cant get right solution.
Please help me if anybody having clear idea on this aspect.
thanks in advance -
Problem while loading security information (users/roles) from repository
Iview have stopped connecting to our MDM, All repositories, all IViews Very strange
Here is what I see in the logs.... Any ideas? Please if you have seen this before only
Marty
com.sap.mdm.extension.MetadataException: Problem while loading security information (users/roles) from repository 'PORTAL_CUSTOMERS'
at com.sap.mdm.extension.MetadataManager.loadRoleCache(MetadataManager.java:559)
at com.sap.mdm.extension.MetadataManager.internalGetRoleSet(MetadataManager.java:502)
at com.sap.mdm.extension.MetadataManager.getRoleSet(MetadataManager.java:471)
at com.sap.mdm.extension.MetadataManager.createMetadataKey(MetadataManager.java:464)
at com.sap.mdm.extension.MetadataManager.getRepositorySchema(MetadataManager.java:197)
at com.sap.mdm.uwl.MdmUwlConnector.createUserSessionContext(MdmUwlConnector.java:1463)
at com.sap.mdm.uwl.MdmUwlConnector.new_retrieveItems(MdmUwlConnector.java:546)
at com.sap.mdm.uwl.MdmUwlConnector.getItems(MdmUwlConnector.java:129)
Caused by: com.sap.mdm.commands.CommandException: com.sap.mdm.net.ConnectionException: java.io.IOException: Unexpected socket read. Result is -1.
at com.sap.mdm.security.commands.GetUserListCommand.execute(GetUserListCommand.java:72)
at com.sap.mdm.extension.MetadataManager.loadRoleCache(MetadataManager.java:526)
Caused by: com.sap.mdm.net.ConnectionException: java.io.IOException: Unexpected socket read. Result is -1.
at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:102)
at com.sap.mdm.security.commands.GetUserListCommand.execute(GetUserListCommand.java:69)
at com.sap.mdm.internal.net.DataSocket.receiveData(DataSocket.java:62)
at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:497)
at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:490)
at com.sap.mdm.internal.net.ConnectionImpl.nextMessage(ConnectionImpl.java:629)
at com.sap.mdm.internal.net.ConnectionImpl.receiveMessage(ConnectionImpl.java:572)
at com.sap.mdm.internal.net.ConnectionImpl.send(ConnectionImpl.java:233)
at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:99)
com.sap.mdm.commands.CommandException: com.sap.mdm.net.ConnectionException: java.net.SocketException: There is no process to read data written to a pipe.Early this month we upgraded the MDM server to:
MDM Server version: 5.5.63.57
And the portal components:
MDM 5.5 SP06 Technology Patch 3 (Build 5.5.63.57)
MDM 5.5 SP06 Application Patch 3 (Build 5.5.63.57)
MDM 5.5 SP06 Java API Patch 3 (Build 5.5.63.57)
However the issue just began 2 days ago?
We started intgrating MDM Workflow with UWL and assigned Roles and Iviews to the Universal Worklist Configuration
It seems the Iviews work for a while and then after some time everything gives up? Very confounding
And yes we are using standard Iviews (search, Result and detail)
Thanks
Edited by: Marty Monroe on Oct 31, 2008 3:07 PM -
Facing problem while loading data into XI
Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahulHi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh -
Facing Problem while executing a command through WLST
Hi,
Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
But whenever i execute the same in Linux,it is throwing the error as below:
wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: reassociateSecurityStore
Please suggest....
Regards
PavanFacing Problem while executing a command through WLST
-
Problem in getting the image through URL
hi all,
I facing the problem,Inwhich i am unable find the solution...I am using the following code to display the image
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws IOException, ServletException {
int data=0;
response.setContentType("image/png");
ServletOutputStream out = response.getOutputStream();
String file = request.getContextPath()+imageNames[0];
//String file = "C:/Program Files/Apache Group/Tomcat 4.1/webapps/ImageComm/WEB-INF/images"+imageNames[index];
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
System.out.println("the size of the inputStream is..."+in.available());
System.out.println("the context path is..."+request.getContextPath());
while ((data = in.read()) != -1) {
out.write(data);
with the above i am not getting any error at the compile time but it was giving exception like FileNotFoundException.
but the same thing(URL address) when i am copying on the browser it was displayig the image.
(what might be the reason)
one more thing when i commented on the url address and try to use the actual realpath address it was displaying the image with out any problem
can anybody give me the solution like where to keep my images by which i can able to get the images through url address
thanks in advance
lakshmanhi all,
I am getting the image from the server.but the problem is i am getting the Exception as ArrayOutOfBound exception.
It was displaying the Image for the first time.and when ever it was going for the second time in to the paint method it was displaying the IOException in reading the stream from the connection.
can anybody give me the solution in rectifying that exception.
thanks in advance
lakshman -
Issue while loading Master Data through Process Chain in Production
Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
BhanumathiHi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan -
Long text problem while uploading Inspection plan through BDC.
Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
FahiéHi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié -
(Class cast Exception)Problem while loading data fro database in java class
Dear all,
Please help me...to solve this
I have a database having two columns of String and Date Types.
In my java code i was trying to load the data to a UI.
I am successfull in loading the String type value.
But while loading date field value,is showing Class cast Exception.
What i am doing is Getting the values from database to a String[] array.
So my question is how to
get the Date field as date field itself,Then convert it to a String..Then put it in to String[] array...
Any body please help...If any one want more clarification in question i will give......Hi,
I am using GWT to display my data in a Grid.
So it will accept a Single two dimensional String array....Here i have one as String and other as Date.
So i was trying to get each row in a sindle dimensional array array[] then store it in a list.
Iteration goes up to 10 rows.After i am setting it in to a list
ie list.add(array);
Now while returning this list i am doing this
"return (String[][])list.toArray(new String[0][]);"
When i tried to get the date element to String array it is showing class cast exception. When i tried with toString() method it is showing the same problem. -
Problem while Creating Service order through Work Order
Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.Closed..
-
Hi Gurus,
I am getting error "<b>Idocs missing: No end-confirmation arrived in the Warehouse from</b>" while loading data from R3 to BW via process chain.
Can any one please suggest me how solve this problem.
Thanks in advance.
Regards
TonyHi,
It may be due to below reasons...
1. Check whether the Log Table is full in the BW side.
2. Check Whether the Connection to Source System is fine.
3. System might be busy , Many jobs running in system.
Go to SM58 in BW system , find TRFC queue with enteries for each LUW . U can come to know why IDOC is not processed by looking at the error there . Also check whether the job is finished successfully in Source System. U can process the LUW in Sm58 manually from Edit menu entry ....
Thanks
DSt
Maybe you are looking for
-
Creation of Excise Invoice for Sample Sales
Hi Gurus, When i create excise invoice for sample sales against the invoice the excise duties are not capturing it is showing as zero value. Can you give suggestions to solve this. Regards Kiran
-
Ibook G4 freezes when using mains power
Hi There I'm looking for a bit of help, hopefully someone might have had a similar problem. When using mains power my ibook freezes with the screen visible but nothing moving including the mouse arrow. The only way to shut it down is to keep the powe
-
How to make mouse change position on click?
So, I'm trying to make a gun aim at the crosshair, so it follows the mouse all the time. I want it to go up on recoil, so the mouse crosshair goes up and the gun follows up. I tried something like mouseY - 10; but with no luck, it didn't do anything.
-
Dear all, We have installed the PPM Fiori apps on our system; we have managed to get these four apps on the launchpad. However when we click one of the tiles the error "Failure - unable tot start app" occurs. If we do the same but now right click and
-
My podcast stopped updating in iTunes
Hi there, I've been doing a podcast for a bit over a year. About a month ago it stopped updating in iTunes and I don't know why. I've checked out our feed on feedvalidator.org and it seems to be ok. We use podbean to host it. I emailed their supp