Problem while opening the PDF File in Enterprise Protal

Dear All,
I have uploaded a PDF Document of around 30 pages in KM and made an iview to view that document but when i click on the iview the document is not opening properly and after sometime the Portal/system is getting hanged.But when i open the pdf document with less number of pages it is working fine.
I am using EP 7.0 and Adobe Reader 8.1.
Any help or suggestions will be highly appreciated.
Regards
Shareef

Doesnt seem to appear as a portal issue neither it is a reader issue. Might be some issues with the network which isnt allowing the entire file to get downloaded and hence causing the browser to hang.
Thanks,
GLM

Similar Messages

Problem while opening the PDF

Hi All,
Iam having an issue while opening the PDF-Attachment in which iam sending it as attachment to the mail.While opening the PDF iam getting the error that "Aodbe Reader could not open the document because it is either not a supported file type or because the file has been damaged(for example,it was sent as an email attachment and was'nt correctly decoded)".
The function-module "SO_NEW_DOCUMENT_ATT_SEND_API1" is getting use to send the attachment.
First iam converting the internal table data into PDF and then am sending the mail with PDF-attchment.
Thanks,
Asmitha.

Even i had a smilar problem. The reason is perhaps the data in internal table doesnt get converted into PDF corectly. In my case i had to convert into PDF and download on local machine. Attching below code for it.Maybe u can get pointers to your problem.
REPORT sy-repid
       NO STANDARD PAGE HEADING
       LINE-COUNT 74
       LINE-SIZE 200
       MESSAGE-ID zz.
PARAMETERS : pcfile LIKE rlgrap-filename LOWER CASE.
DATA :textlines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA otf LIKE itcoo OCCURS 1000 WITH HEADER LINE.
DATA it_lines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA options LIKE itcpo.
DATA header LIKE thead.
DATA result LIKE itcpp.
DATA: bin_filesize TYPE i.
DATA: filesize TYPE i,
convcount TYPE i,
cancel(1).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
    CALL FUNCTION 'WS_FILENAME_GET'
      EXPORTING
        mask     = ',*.*,*.*.'
      IMPORTING
        filename = pcfile
      EXCEPTIONS
        OTHERS   = 1.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
START-OF-SELECTION.
    DATA : BEGIN OF itab OCCURS 0,
            matnr TYPE mara-matnr,
            END OF itab.
    SELECT matnr FROM mara UP TO 10 ROWS INTO TABLE itab.
    LOOP AT itab.
      textlines-tdformat = '*'.
      textlines-tdline = itab-matnr.       APPEND textlines.
    ENDLOOP.
    options-tdgetotf = 'X'.
    options-tdnoprev = 'X'.
    CALL FUNCTION 'PRINT_TEXT'
      EXPORTING
        dialog                   = ' '
        header                   = header
        OPTIONS                  = options
      IMPORTING
        RESULT                   = RESULT
      tables
        lines                    = textlines
        otfdata                  = otf
      EXCEPTIONS
        canceled                 = 1
        device                   = 2
        form                     = 3
        OPTIONS                  = 4
        unclosed                 = 5
        unknown                  = 6
        format                   = 7
        textformat               = 8
        communication            = 9
        bad_pageformat_for_print = 10
        OTHERS                   = 11.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
      IMPORTING
        bin_filesize          = filesize
      TABLES
        otf                   = otf
        lines                 = it_lines
      EXCEPTIONS
        err_conv_not_possible = 1
        err_bad_otf           = 2.
    DATA : g_file TYPE string.
    g_file = pcfile.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        bin_filesize            = bin_filesize
        filename                = g_file
        filetype                = 'BIN'
      TABLES
        data_tab                = it_lines
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6.
Regards,
Mansi

WebInterface Server - Error while opening the PDF file

Hello,
We are using webinterface to display the MSDS genearated.
Our customers use the link provided to them for displaying the msds.
We imported a few MSDS ( CG36 ), which are in PDF format & displayed successfully on the webinterface server.
However the newly generated MSDS ( Create Report ) from SAP EH&S system are not getting displayed on the webinterface server. We are getting following error message:
Error reading resulitng document from filesystem. Class:
COM.td.ehswww.results.EhsDocument.
Method:getResolvedDocument().This error could have been caused by a misconfigured filter.ini.
We checked and found that the filter.ini file is same on both quality & production system.
We are able to generate & display the report successfully on quality webinterface server.
Problem only appears on the production webinterface server.
We also tried to search for the SAP notes on this issue.
But we could not find out any relevant note for our issue.
Any help in this regarding is highly appreciated.
Thanks & Regards,
Aarohi

Hello Sebastian,
Thank you very much for your help.
We checked on both quality & production webinterface server.
The Tomcat service is not executed with any specific user.
The system is working fine on quality , we are getting errors only on the production.
We also identified a strange behavior on the production web interface server.
We are able to see files under following menu path:
There are error files getting generated.
I guess these error files are getting generated while converting the rtf file to pdf file.
The resultant PDF file is not getting generated and hence system is giving the error on the webpage.
Can you guide us as to why these error files are getting generated .? What can be the root cause of this issue.? and How to prevent this.?
Again thanks a lot for your help.
Best Regards,
Aarohi

Problem while opening the excel files

Hi
In my system , i have excel reports in my server disk . And i am opening the excel files through an action class like /viewReport.do?id=23 .....and thus from the action class i open my excel file .
After opening one excel file , i try to open another excel by clicking that link , then my system often hangs else excel shows an error saying "a report with name viewReport.do is already open " even though both of these files are different on the server
How can i avoid this ??
The reason why i am opening the excel file through an action class is , i need to perform some operations before opening that excel report
i tried by setting the
response.setHeader("Content-disposition","attachment; filename=myWorksheet.xls");
and i kept on changing the names but that doesnt work
Can any one let me know how to go abt this ??

Hi Sir,
I found you posted the issue in the
APS.NET forum, and you seems use some code to open the file. Have you tried the last link in the thread?
Then, let's do some test to narrow down the issue.
I notice that you are using Office 2010, does the issue occur only with 'Reachlocal.xlsx' or every existed file?
If every Excel file has the issue, please try the following methods:
Open the file in
safe mode.
Repair Office 2010.
On the other hand, this problem might be caused by malware on the affected machine. There are now two known variants of malware which causes this problem: Win32/Crilock.A and
Win32/Buma!rts. They have both been identified as a new family of
ransomware.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
If you have any further assistance about code/program, I recommend you post the question to MSDN forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support

Problem while opening a pdf file

Hi,
when i try to open a certain pdf file directly by clicking on the link, the reader hangs up.
when i start the reader and try to open the file directly after that, the reader hangs up.
But when i open the reader, let it run for a minute or two and open the file then, then it works fine.
Anyone got an idea what the problem is?
Regards
a.dura

Hi,
when i try to open a certain pdf file directly by clicking on the link, the reader hangs up.
when i start the reader and try to open the file directly after that, the reader hangs up.
But when i open the reader, let it run for a minute or two and open the file then, then it works fine.
Anyone got an idea what the problem is?
Regards
a.dura

I cannot view PDF in Firefox at the first time but once I manually open the PDF file from my local computer, I can view other PDF files via Firefox webbrowser

I install Adobe Acrobat 9 in my laptop which runs on windows 7. I use Firefox 3.6.8 and have the problem with the PDF file. The problem is I cannot open the PDF file in Firefox web browser at the first time I launch firefox. It shows a warning box without any message. Only OK button is shown so I can close it. However, if I manage to open the PDF file from my local computer by just using adobe acrobat itself then the PDF can be opened in the Firefox web browser. I followed the instruction on the mozilla help but nothing works for me. The problem still exists. I wonder if anyone have the same problem like me and know how to solve this. Thank you so much

Hi there!
I cannot help you, but I think we have a common problem: We got a system here running Vista SP1 with Acrobat 9 standard on it. When we open a pdf file it works normally, but when we open another pdf file, we see the first one in that second window.
Think that missing option to watch several files within a single window-thing messed up more than meets the eye ... but as we just purchased the 15 licenses, we have to use version 9.
I didn't find any clues on this problem, but I will post any new hints I get.

Problem to open with PDF file created in acrobat 5.0

Hi,
I always open my pdf files with acrobat 5.0, but now I made the instalation of Acrobat Reader 7.0 and now when I try to open the pdf files I only see blank pages.
There is some option to fix this problem?
Somebody could you help me?
Regards
Rodrigo

Adobe Reader Lite version 1.5
Basically is as useful as a chocolate teapot. NUL POINTS
I bought PDF+ from www.mBrainSoftware.com fro my Nokia E61
Brilliant
It has opened a 22MB file which is the biggest PDF I have with graphics etc

Getting the NullPointerException,while merging the pdf files.

I am getting the following exception, while merging the pdf files with PDFDocMerger class.
[121807_113056749][][EXCEPTION] java.lang.NullPointerException
at oracle.apps.xdo.template.pdf.PDFWriter.write(PDFWriter.java:62)
at oracle.apps.xdo.template.pdf.PDFWriter.generate(PDFWriter.java:157)
at oracle.apps.xdo.common.pdf.util.PDFDocMerger$PDFUtility.writeOutput(PDFDocMerger.java:2520)
at oracle.apps.xdo.common.pdf.util.PDFDocMerger.mergeDocs(PDFDocMerger.java:537)
at oracle.apps.xdo.common.pdf.util.PDFDocMerger.process(PDFDocMerger.java:378)
This error is coming for few PDF files and those files i was able to open successfully in my machine.
Could any one help me to resolve this issue?
Thanks,
Indira

One of the merged PDF was edited by using the "Adobe Lifecycle Assembler" tool and i was able to open that file successfully in my machine.
Is bi publisher API compatible with such files?
It would be great, if any one can throw some light on this issue.
Thanks,
Indira

Lenvo User Guide doesn't want open the pdf file. Why!?

Lenvo User Guide application doesn't want open the pdf file after selecting my language. I have Adobe Reader installed on my laptop and application is from oryginal Lenovo cd with drivers. I don't know why. Earlier it worked perfectly. I installed and reinstalled it many times but the problem still exist. Does anybody know the solution?

hi tora117,
Welcome to Lenovo Community Forums!
Can you try right clicking the User guide file and go to General tab and check if the "open with" settings is set to Adobe Reader.
If still won't work download a new User guide from www.support.lenovo.com
Home this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Why does reader freeze while opening some pdf files and others open instantaneously?

I use pdf files created from CamScanner and shared from DropBox. In DropBox, many times (over 50%) while opening the PDF the process freezes and the error message is Adobe Reader is not responding. If you close the program, and re-open the file, it opens fine. I have saved these files to my computer and the same issue occurs. The files are 100-500kb, so I do not think size is the issue. I have reinstalled Reader (11.1.10) and there is no improvement.

This appears to have reduced the time to load a document. Thanks Jimb From: Anubha Goel <[email protected]>
To: jimb70395944 <[email protected]>
Sent: Friday, March 20, 2015 4:37 AM
Subject: You have been mentioned by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community
|
You have been mentioned
by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community - View Anubha Goel's reference to you Hey jimb70395944, Please try disabling protected mode under 'Edit> Preferences> Security (Enhanced)' and uncheck 'Enable Enhanced Security' option.Then, try again and let me know. Regards,Anubha
Participate in the conversation by replying to this email
To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

How to open the pdf file using LabVIEW program

I want to open the pdf file using the system exe, but it is not happening . Can you help me?
Solved!
Go to Solution.

In simpler version
Mark the satisfied answer as accepted solution for your question,you mistakenly marked youself
Message Edited by Baji on 04-07-2009 05:03 PM
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
open pdf.JPG ‏25 KB

Please help i cannot open the pdf files of cic.gc.ca

please help i cannot open the pdf files of cic.gc.ca

Hi ooovvvaaaiiisss12345.
Are you trying to view the pdf's from the browser are after downloading it and viewing via Reader.
Please let me know the OS and browser you are using.
Are you able to view the pdf's on other websites?
Let me know what errors you get while viewing the pdf's

Doesn't open the PDF file (i.e. articles, books pages). It appears a black page. Thanks for help

Safari doesn't open the PDF file (articles, book page, etc). It appears a black page. Before that it was working perfectly. Thank for your help

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin (or anything Adobe related) in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

'failed to open the PDF file' error - Indesign CS3 on Mac

Hi,
Whenever I place PDFs that were created by any other app besides indesign or Illustrator I get a 'failed to open the PDF file' error, previously these PDFs were fine to place but all of a sudden they're not... Help?
I'm not too keen on opening in Illustrator and resaving for the rest of the foreseeable future either...
Jared

Thanks for the reminder, Scott.
http://indesignsecrets.com/failed-to-open-pdf-error-show-options-to-fix-it.php
Bob

How to AVDocGetPDDoc without opening the pdf file

Hi all,
how to AVDocGetPDDoc without opening the pdf file in acrobat plugin sdk.
Regards,
JK

thanks for ur reply, now its fine.

Problem while opening the PDF File in Enterprise Protal

Similar Messages

Maybe you are looking for