Problem while sending the *.txt as attachment with mail

Hi All,
I am Using function module (SO_NEW_DOCUMENT_ATT_SEND_API1) to send Mail with attachment in *.TXT format. But This function module is allowing only 255 char for a row. But the length of my Internal table is 700 char. Is there any another way to process the attachment without disturbing the data,that means need to process all 700 char in the field with out splitting.

no other way and use mutilple lines as text ( This is possible )
you want to keep text as multiple lines into internal table use FM
SWA_STRING_SPLIT - Pass text and maintain length as 255 Charcters

Similar Messages

Problem while sending the mail from sap

Hi experts,
                 I am facing some problem while sending mail from sap to external mail.
this is th code i am using but it is not working. plz check and tell me.
REPORT ZMAIL_DEMO.
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
break-point.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = 'SOME MAIL ID'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'RAW'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc = 0.   "( did not receive any mail) *
write : 'mail sent'.
endif.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Problem while sending the message using RWB

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Logo Problem While sending the smart form as an attachment via Email

Hi ,
I am using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send the smartforma as an attachement into the mailbox . it is sent correctly but the COLOR LOGO are not coming correctlly .
I checked the OTF to PDF file is getting converted correctly .i.e. if i am downloading the foem then it is displaying correctly , but in case of sending it to mailbox as an attached PDF file ,the logo are not comming correctly ,
If anybody faced such type of problem can u please clarify .
I am thinking the problem is in FM SO_NEW_DOCUMENT_ATT_SEND_API1 . this FM is not sending the Attached PDF file correctly .
All the TExt/variables are displaying correctly in the PDF file except the LOGO.while opening the PDF file one Warnng message is getting displayed : "An error occured while opening the Image" .
PLease help ..
Thanks,
sachi

Hi,
Edit your logo as 256 color bit map image and save it and upload into SE78,
And also better to use this FM :SO_DOCUMENT_SEND_API1 it is good for new versions.
thanks,
venkat.
Edited by: Satya venkat Rao.R on Dec 13, 2011 6:02 AM

Problem while sending the o/p of payslip report through mail

Hi ,
         I am trying to mail the output of ZHINACALC0 (copy of standard program HINCALC0 for payslip display)
        In the report code of ZHINCALC0, there is a form named xform which contanis the o/p of the employee's payslip.
CALL FUNCTION 'HR_PL_APPEND_FORM'
           EXPORTING
                imp_pernr = pernr-pernr
                imp_period = rgdir-inper                "XMS note 386560
           TABLES
                imp_form   = *xform*
           EXCEPTIONS
                OTHERS     = 0.
I am using the following function module to get the o/p from memory.
SUBMIT ZHINCALC0 EXPORTING LIST TO MEMORY AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
            LISTOBJECT = LISTOBJECT
       EXCEPTIONS
            NOT_FOUND = 1
            OTHERS     = 2.
IF SY-SUBRC <> 0.
WRITE 'Error in list_from_memory.'.
ENDIF.
after this i am using SO_NEW_DOCUMENT_ATT_SEND_API1 to send the o/p through mail.
However i am not getting the desired result as the function module LIST_FROM_MEMORY takes an o/p list as input,but this is not the case here as xform is not an o/p list. How do i send the xform into memory and then get it back. Kindly help.
Thanks and Regards,
Subhabrata.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Error while sending excel sheet as attachment to Mail Receiver

Hi everyone,
I am facing the below error when I am trying to send data to Mail receiver adapter. The attachment is excel sheet.
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of MessageTransformBean.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of MessageTransformBean..
I don't understand where the problem is. This has been running since long time and last month we have changed our web dispatcher details. I hope everything is fine. But not sure the root cause for this issue.
Please help me in resolving this.
Thank you.
Regards
Bhanu T.

Check if this helps: MessageTransformBean module
Confirm that you have configured the MessagetransformationBean properly.
Are you trying to convert some payload into Excel and send it as an attachment in the Mail CC? If yes, then I hope that you have included the correct Content_type value.
Check this for more info on Content_type: /people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
Regards,
Abhishek.

Problem while sending IDOC to File Senario

Hi Experts
    I am having problem while sending the Idoc from SAP R/3 to File
   I have done all the setting in SAP as well in XI but while pushing IDOC
   I am getting error in the transaction sm58 in SAP R/3
" <b>The service for the client 300(My SAP R/3 client) is not present in Integration
Directory</b>"
I can any one explain me what to done on this....all the connections are fine
Waiting for Response
Adv points and thanx
Rakesh

Reason and Prerequisites
You send IDocs from system ABC to the exchange infrastructure (XI) of system XIZ, and error messages are issued in system ABC (Transaction SM58) for the IDOC_INBOUND_ASYNCHRONOUS function module.
This note proposes solutions for the following error messages:
a) No service for system SAPABC client 123 in the integration directory
b) Transaction IDX1: Port SAPABC, client 123, RFC destination
c) ::000
d) NO_EXEC_PERMISSION: "USER" "Business_System"
e) IDoc adapter inbound: Error error ...
Solution
a) Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc, the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service):
Business system
Activities in the System Landscape Directory (SLD)(Create technical system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client.
For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the "Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with TransactionSLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD.
In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
b) Error message: Transaction IDX1: Port SAPABC, client 123, RFC destination
Solution:
The Integration Server tries to load the IDoc metadata from the sending system. The IDoc schemas from the Integration Repository cannot be used because they are release-dependent.
The sending system is determined by the value of the "SNDPOR" field from the IDoc control record (for example, "SAPABC").
Activities in the central XI system:
In Transaction IDX1, you can assign an RFC destination to the sending system (for example, "SAPABC"). This must be created beforehand in Transaction SM59.
Note that the IDoc metadata is cross-client data. In Transaction IDX1, only one entry must be maintained for each system. Only the lowest client is used by the runtime for Idoc metadata retrieval with RFC.
Ensure that only SAPABC and not "SAPABC_123" is entered in the port name.
c) Error message: "::000"
Solution:
This error occurs if the central XI system tries to load the IDoc metadata from the sending system by RFC.
There may be several different reasons for the failure of the metadata import, the error is not transferred in full by tRFC completely, and this results in the error message above.
User cannot log onto sending system
User/password/client is not correct or the user is logged due to too many failed logons.
Activities in sender system ABC:
Transaction SM21 contains entries for failed logons.
Activities in the central XI system:
Determine the sending port from the IDoc control record of the IDoc. If the ID of the sending system has the value "ABC", the value of the sending port is "SAPABC". You will find the RFC destination used for the "SAPABC" sending port with the lowest client in Transaction IDX1. In Transaction SM59, you will find the RFC destination containing the maintained logon data .
User does not have the required authorizations
Activities in the sender system ABC:
In Transaction SM21, you will find entries relating to authorization problems and more exact details.
Contact your system administrator and, if necessary, assign the user the required roles in user administration.
IDoctyp/Cimtyp cannot be loaded
Activities in sender system ABC:
In the sender system, you can check your IDoc types in Transaction WE30 (IDoc type editor) Take note not only of the errors, but also of the warnings.
The most common errors are:
- IDoc type or segments not released
- Segments that no longer exist are listed in the IDoc type
- Data elements that do not exist in the DDIC are assigned to fields
in the segment.
Contact your system administrator and correct these errors in the IDoc type.
d) Error message: NO_EXEC_PERMISSION: "User" "Business_System"
Solution:
You created a list of users in the directory who are authorized to use the "Business_System". The user in the error message is not on the list.
Alternatively, the same error is used if you have created a sender agreement with a channel of the IDoc type for the "Business_System" and the interface used. The user in the error message is not contained in the list of all authorized users defined there.
e) Error message: IDoc adapter inbound: Error error
Solution:
You send IDocs to the central XI system, where they are received by the IDoc adapter. The IDocs are converted into IDoc XML, and a corresponding XI message is generated and transferred to the XI Runtime Engine. The Engine tries to read its own business system from the "Exchange Profile". If the Exchange Profile is currently unavailable, the message is not processed and it is returned to the sending system with an error message.
Regard's
Prabhakar.....

Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"

I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupname

Hi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal

Problem while sending/Receiving request using the HttpURLConnection obj

Hi,
We are facing the problem while passing the request in Weblogic.
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
Currently we are migrating 2 applications to WebLogic. Application1 to application2 request should pass.
Below is some example we tried:
"When we send a request to our code using the SSOAdaptor code (which handles the request/session in our application) which is on the SunOne server the request parameters are received by our code successfully. And also in Create User Functionality of application1 we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass."
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues.
Where as when the request is sent from WebLogic to WebLogic the request parameters are missing some how.
Is there any issue in Weblogic? Please helpus on this.
Thanks,
Nagesh
Edited by: user9307541 on Mar 15, 2010 5:08 AM

Hi,
Please find below scenario for testing.
We have tested the SSOAdaptor code (it is the fucntion name which will send the data from source) locally by hittiing the WPS adaptor URL in a Java client program(TestRequest.java) and the request parameters were reaching the WPS Adapter successfully.
Then we have written two test servlets to test the communication between SSOAdaptor(TestServlet.java) and WPS adaptor(WPSServlet.java).
Functionality of TestSevlet: It is sending a request to WPSServelt similar to the way we are doing it in SSOAdaptor.
Functionality of WPSServlet: It will receive the request parameters and write the parameter Map to console.
We have deployed and these two servlets(in a single webapplication) on Tomcat server and the request parameters are reaching the WPSServlet successfully.
Output on Tomcat server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{TypeAcc=[Ljava.lang.String;@14e3f41, ServiceName=[Ljava.lang.String;@1acd47, GMEPortalUserID=[Ljava.lang.String;@19b04e2, UserID=[Ljava.lang.String;@5dcec6, Country=[Ljava.lang.String;@b25b9d}
after sending request
After this we have deployed these two servlets (with in a single webapplication) on the Weblogic server in Dev machine(path: /apps/usmport/domains/usmport/servers/usmport_admin/upload/ssoAdaptor/WEB-INF/classes/com/gm/gmeportal/security/adaptor) and
now the request parameters are not reaching the WPSServlet.
Output on Weblogic Server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{}
after sending request
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
When we send a request to WPSAdaptor using the Old SSOAdaptor code which is on the SunOne server the request parameters are received by WPS successfully. And also in Create User Functionality of Portal we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass.
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues. Where as when the request is sent from weblogic to weblogic the request parameters are missing some how.
Please find below javs source code used to test this:
TestRequest.java
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
public class TestRequest {
     * @param args
     public static void main(String[] args) throws Exception{
          // TODO Auto-generated method stub
          excutePost("http://localhost:8080/Testing/TestServlet", "GMEPortalUserID=captest.wss@it0555&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
          //System.out.println("********** Now the request is from SSO *****************");
          //excuteGet("http://10.156.0.173:7013/channel21/wpsadapter", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
     public static String excutePost(String targetURL, String urlParameters)
     URL url;
     HttpURLConnection connection = null;
     try {
     //Create connection
     url = new URL(targetURL);
     connection = (HttpURLConnection)url.openConnection();
     connection.setRequestMethod("POST");
     connection.setRequestProperty("Content-Type",
     "application/x-www-form-urlencoded");
     connection.setRequestProperty("Content-Length", "" +
     Integer.toString(urlParameters.getBytes().length));
     connection.setRequestProperty("Content-Language", "en-US");
     connection.setUseCaches (false);
     connection.setDoInput(true);
     connection.setDoOutput(true);
     //Send request
     DataOutputStream wr = new DataOutputStream (
     connection.getOutputStream ());
     wr.writeBytes (urlParameters);
     wr.flush ();
     wr.close ();
     //Get Response
     InputStream is = connection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     System.out.println("Response is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(connection != null) {
     connection.disconnect();
     public static String excuteGet(String targetURL, String urlParameters) throws Exception
          URL url = new URL(targetURL);
          HttpURLConnection httpurlconnection =
               (HttpURLConnection) url.openConnection();
          /*httpurlconnection.setRequestProperty(
               "cookie",
               constructRequestParams(httpservletrequest.getCookies()));*/
          httpurlconnection.setDoOutput(true);
          httpurlconnection.setDoInput(true);
          httpurlconnection.setRequestProperty(
               "Content-length",
               String.valueOf(urlParameters.length()));
          OutputStream outputstream = httpurlconnection.getOutputStream();
          outputstream.write(urlParameters.getBytes());
          outputstream.flush();
          //Get Response
          try{
     InputStream is = httpurlconnection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     System.out.println("Response from SSO is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(httpurlconnection != null) {
          httpurlconnection.disconnect();
TestServlet.java
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class TestServlet
public class TestServlet extends HttpServlet {
     private static final long serialVersionUID = 1L;
* Default constructor.
public TestServlet() {
// TODO Auto-generated constructor stub
     * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          doPost(request,response);
     * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          //System.out.println("********************** the request Map is:" + request.getParameterMap());
          try {
               System.out.println("before sending request");
               excuteGet("http://localhost:7003/ssoAdaptor/WPSServlet", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
               System.out.println("after sending request");
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public String excuteGet(String targetURL, String urlParameters) throws Exception
          URL url = new URL(targetURL);
          HttpURLConnection httpurlconnection =
               (HttpURLConnection) url.openConnection();
          /*httpurlconnection.setRequestProperty(
               "cookie",
               constructRequestParams(httpservletrequest.getCookies()));*/
          httpurlconnection.setDoOutput(true);
          httpurlconnection.setDoInput(true);
          httpurlconnection.setRequestProperty(
               "Content-length",
               String.valueOf(urlParameters.length()));
          OutputStream outputstream = httpurlconnection.getOutputStream();
          outputstream.write(urlParameters.getBytes());
          outputstream.flush();
          //Get Response
          try{
     InputStream is = httpurlconnection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     //System.out.println("Response from SSO is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(httpurlconnection != null) {
          httpurlconnection.disconnect();
WPSServlet.java
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class WPSServlet
public class WPSServlet extends HttpServlet {
     private static final long serialVersionUID = 1L;
* @see HttpServlet#HttpServlet()
public WPSServlet() {
super();
// TODO Auto-generated constructor stub
     * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          System.out.println("**********************Inside WPS Servlet -- the request Map is:" + request.getParameterMap());
     * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          doGet(request,response);
Thanks,
Nagesh

Experiencing the problems while encoding the barcode with Code 128 font

Hi Tim,
Hope you are doing good.
We are experiencing the problems while encoding the barcode with Code 128 font.we have followed the Oracle BI Publisher Blog i.e Barcoding 102 http://blogs.oracle.com/xmlpublisher/discuss/msgReader$281.
Before applying the encoding Java class we were able to display the barcode but after applying this encoding Java class we are not able to display the barcode.
We are requesting you to help us for encoding the barcode with Code 128 font and read barcode by scanner.
We will appreciate and thankful if anybody help us in this regard
Thanks,
SubbaRao.

Hi Tim,
I am trying to create 128 Barcode, output shows little junk characters. I followed the your "Barcoding 102 instrucitons but no luck. I apprciate your help if you provide some help on this.
http://blogs.oracle.com/xmlpublisher/2006/06/06
1. Created Java class under $JAVA_TOP/oracle/apps/oracle/xdo/template/util/barcoder
2. Registeted and applied the format the barcode to the form field. I will sedn my XML, RTF and Java class, Would you pleae advice me on this
Thanks
Venu

Getting: Unable to send attachment with Mail Drop

Mail Drop is not working for me, I always get error message while trying to send.
Here is what happens:
-I compose a message that includes a large attachment
-I click send
-I get the message "Unable to send attachment with Mail Drop" for a few seconds
-My message is not sent and it goes into the Outbox folder.
Configuration:
OS X 10.10 Yosemite
Mail -> Preferences -> Accounts -> Advanced. The option "Send large attachments with Mail Drop" is selected.

I had the exact same problem. I finally figured out what was wrong. I believe you must have iCloud Drive turned on in System Preferences AND you also must allow mail to store document in iCloud Drive which you can check by clicking the "Options..." button in the preference pane of iCloud Drive. As you can see below.

Dreamweaver encountered problems while constructing the menus from the current menus.xml file

So, after having trouble with my Photoshop scratch disk, I had to do an archive and install of my Mac OS 10.6.1 then reinstall the Adobe suite. I then had to run the Licensing Repair Tool (http://www.adobe.com/support/contact/licensing.html).
Now everything works but Dreamweaver, which is throwing the following error:
"Dreamweaver encountered problems while constructing the menus from the current menus.xml file.
Please delete the current menus.xml file and rename menus.bak to menus.xml"
I tried that. menus.bak is a directory, not a file. Even renaming the directory didn't work.
I saw this http://forums.adobe.com/message/2188511#2188511
but I don't have a /FlashPlayerTrust/ directory, nor do I see what that has to do with Dreamweaver.
I couldn't find a corresponding solution for this http://forums.adobe.com/message/862339#862339 for the Mac OS.
This http://forums.adobe.com/message/3396334#3396334 didn't help, either.
Anybody have any ideas?
Thanks!

This is the error I got after deleting (moving) the configuration directory.
"No document types have been found in the Configuration/DocumentTypes/ folder. The MMDocumentTypes.xml file may be missing or corrupted. The application will exit now."
I've reinstalled the entire Adobe CS4 (which fixed my Photoshop problem but created this Dreamweaver problem) and then reinstalled Dreamweaver alone.
I've also attached a screenshot of the Dreamweaver directory tree with the menus.xml files.

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Want to Send smartform as pdf attachment with a Email to some mail id

Hi ,
I want to send a smartform as a PDF attachment with a mail to a mail id. And I can send a mail with the PDF attachment.
But I am not able to open the PDF. It is throwing some error (Adobe reader could not open u2018fileu2019 because it is either not a supported file type or because the file has been damaged (for example , it was sent as an email attachment and was not correctly decoded)).
By debugging I come to know that the file which is generating is in some encoding format.
Please help me regard this. This is very urgent.
here is the code,
Main Program :
REPORT Ztest_report.
*--Top Include for Global Data Declarations.
INCLUDE ztest_report_top.
*--Form Include for Form Routines.
INCLUDE ztest_report_form.
START-OF-SELECTION.
START-OF-SELECTION.
*--Display data
Perform display_data.
END-OF-SELECTION.
Top declaration :
Internal table
DATA : i_otfdata TYPE tsfotf,          " Smart Forms: Table OTF
        i_tline TYPE TABLE OF tline WITH HEADER LINE,
        i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
        i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
        i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
        w_mailaddr TYPE ppfdmailad,
        w_mailtype TYPE so_escape,
        w_mailrecipient TYPE swotobjid,
        w_control TYPE ssfctrlop,
        w_compop TYPE ssfcompop,
        w_return TYPE ssfcrescl,
        wa_doc_chng TYPE sodocchgi1,
        w_data TYPE sodocchgi1,
        wa_buffer TYPE string, "To convert from 132 to 255
        wa_objhead TYPE soli_tab,
Variables declarations
        v_form_name TYPE rs38l_fnam,
        v_len_in LIKE sood-objlen,
        v_len_out LIKE sood-objlen,
        v_len_outn TYPE i,
        v_lines_txt TYPE i,
        v_lines_bin TYPE i.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-009.
PARAMETER:      p_bukrs TYPE bukrs OBLIGATORY,            "Company Code
                p_belnr TYPE belnr_d OBLIGATORY,          "Document No
                p_gjahr TYPE gjahr OBLIGATORY,            "document type
                p_mailid(50) TYPE c OBLIGATORY.
"Mail Id
SELECTION-SCREEN END OF BLOCK blk1.
Form Logic :
FORM display_data.
*Local Variable declaration
DATA: lc_fm TYPE rs38l_fnam,       "local variable to store the
        l_i_document_output_info TYPE ssfcrespd,
        l_i_struc_job_output_info TYPE ssfcrescl,
        l_i_struc_job_output_options TYPE ssfcrescl,
        i_lines TYPE TABLE OF tline WITH HEADER LINE,
        lv_job_output_info      TYPE ssfcrescl,
        lv_document_output_info TYPE ssfcrespd,
        lv_job_output_options   TYPE ssfcresop,
        lv_bin_filesize         LIKE sood-objlen.
Determine the smartform name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
            formname           = 'ZTEST_SMARTFORM'
       IMPORTING
            fm_name            = lc_fm
       EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_control-getotf = 'X'.
w_control-no_dialog = 'X'.
w_control-preview = space.
w_control-device = 'MAIL'.
Call the smartform and pass the selection screen parameter
CALL FUNCTION lc_fm
       EXPORTING
            control_parameters = w_control
            output_options     = w_compop
            user_settings      = 'X'
            t_bukrs            = p_bukrs
            t_belnr            = p_belnr
            t_gjahr            = p_gjahr
       IMPORTING
            job_output_info    = l_i_struc_job_output_info
       EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Moving the Smart Forms: Table OTF into an internal table
i_otfdata[] = l_i_struc_job_output_info-otfdata[].
CONVERT TO OTF TO PDF.
CALL FUNCTION 'CONVERT_OTF'
       EXPORTING
            format                = 'PDF'
            max_linewidth         = 132
       IMPORTING
            bin_filesize          = lv_bin_filesize
       TABLES
            otf                   = i_otfdata
            lines                 = i_lines
       EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            err_bad_otf           = 4
            OTHERS                = 5.
IF sy-batch EQ l_c_no.
To directly view the print-preview in PDF format
CALL FUNCTION 'SSFCOMP_PDF_PREVIEW'
       EXPORTING
            i_otf                    = i_otfdata
       EXCEPTIONS
            convert_otf_to_pdf_error = 1
            cntl_error               = 2
            OTHERS                   = 3.
For Sending the PDF file to a Mail ID.
LOOP AT i_lines.
   TRANSLATE i_lines USING '~'.
   CONCATENATE wa_buffer i_lines INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
   i_record = wa_buffer.
   APPEND i_record.
   SHIFT wa_buffer LEFT BY 255 PLACES.
   IF wa_buffer IS INITIAL.
     EXIT.
   ENDIF.
ENDDO.
DATA: BEGIN OF zlines OCCURS 0,
tline TYPE char255,
END OF zlines.
*Change the PDF format from 132 to 255.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
       EXPORTING
            transfer_bin                = 'X'
       TABLES
            content_in                  = i_lines
            content_out                 = zlines
       EXCEPTIONS
            err_line_width_src_too_long = 1
            err_line_width_dst_too_long = 2
            err_conv_failed             = 3
            OTHERS                      = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Attachment
REFRESH: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR wa_objhead.
i_objbin[] = zlines[].
Create Message Body Title and Description
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 2.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Attachment (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 2.
I_OBJPACK-DOC_TYPE = 'RAW'.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = p_mailid.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
Send new document with attachments via RFC
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            document_data              = wa_doc_chng
            put_in_outbox              = 'X'
            commit_work                = 'X'
       TABLES
            packing_list               = i_objpack
            object_header              = wa_objhead
            contents_bin               = i_objbin
            contents_txt               = i_objtxt
            receivers                  = i_reclist
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
IF sy-subrc <> 0.
    WRITE:/ 'Error When Sending the File', sy-subrc.
ELSE.
    WRITE:/ 'Mail sent'.
ENDIF.
ENDFORM.                    " display_data

hi,
i wrote a programm.for me it is working.i think it will help for u.
DATA: t_otfdata TYPE ssfcrescl,
      t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
      t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
      w_bin_filesize TYPE i,
      wa_ctrlop TYPE ssfctrlop,
      wa_outopt TYPE ssfcompop,
      WA_BUFFER TYPE STRING,          "To convert from 132 to 255
      WA_OBJHEAD TYPE SOLI_TAB,
      WA_DOC_CHNG TYPE SODOCCHGI1,
      W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
      V_LINES_TXT TYPE I,
      V_LINES_BIN TYPE I,
      nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSR_DEMO1'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = form_name
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = wa_ctrlop
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = wa_outopt
   USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            = t_otfdata
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
   MAX_LINEWIDTH               = 132
ARCHIVE_INDEX               = ' '
COPYNUMBER                  = 0
ASCII_BIDI_VIS2LOG          = ' '
PDF_DELETE_OTFTAB           = ' '
IMPORTING
   BIN_FILESIZE                = w_bin_filesize
BIN_FILE                    =
TABLES
    OTF                         = t_otf
    LINES                       = t_lines
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'mail id'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    DOCUMENT_DATA              = WA_DOC_CHNG
    PUT_IN_OUTBOX              = 'X'
    COMMIT_WORK                = 'X'
TABLES
    PACKING_LIST               = T_OBJPACK
    OBJECT_HEADER              = WA_OBJHEAD
    CONTENTS_BIN               = T_OBJBIN
    CONTENTS_TXT               = T_OBJTXT
    RECEIVERS                  = T_RECLIST
EXCEPTIONS
    TOO_MANY_RECEIVERS         = 1
    DOCUMENT_NOT_SENT          = 2
    DOCUMENT_TYPE_NOT_EXIST    = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR            = 5
    X_ERROR                    = 6
    ENQUEUE_ERROR              = 7
    OTHERS                     = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
please reward me if helpful.

Error while sending the email notifcation

Hi All
I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
[2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
     at java.util.Vector.elementAt(Vector.java:427)
     at javax.mail.Multipart.getBodyPart(Multipart.java:157)
     at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
     at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
     at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
     at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
     at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
     at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
     at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy346.onMessage(Unknown Source)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
[2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
     Status type : DELIVERY_TO_GATEWAY:FAILURE,
     Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
     Addressed to : EMAIL:[email protected],
     UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
     UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
     Gateway message Id : ,
     Status Received at : Wed Sep 12 03:55:41 HST 2012.
Check status details and fix the underlying reason, which caused error.
[2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
Hence it will not be retried.
Possible cause could be purging of notification data after sending out notification, but before receiving status.
]]

Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
Please make sure that the outgoing mail server and port along with the username and password are correct.
Also validate the workflow settings in your EM?
In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
Thanks
ACM

Problem while sending the *.txt as attachment with mail

Similar Messages

Maybe you are looking for