Problem with academic rule in report

Hello,
I have an academic rule that uses the Module Booking Single callup point (0003) and the checking is provided by an user-exit
The problem is that the rule Works fine through the transaction PIQST00 -> Change Module booking, (dialog mode) but when the hriq_student_booking function is called from a report, the rule doesn't check.
We have another academic rules created as this one, and they work fine in both environments (dialog and through HRIQ_STUDENT_BOOKING into a report)
I debugged the report and the value returned for this rule by sy-subrc is zero, when the expected value for a negative check result is nine
Any comments about this will be of great help.
Regards,
Diego

Hi Diego,
Within HRIQ_STUDENT_BOOKING we have the parameters IV_DIALOG and IV_MODE control the way the function responds when error messages are returned on a module booking (including VSR rule messages). Please check how are this parameters used in your implementation of the RFC.
I attach a brief documentation of the usage.
IV_DIALOG = D.- Technical errors will stop process immediately (RETURN_CODE = 4, message in EXP_OBJECT_SUBRC). With this option business errors will be collected by message handler (filtered by user customization) and displayed by VSR tool. If there is at least one remaining error message, no database update will be possible (RETURN_CODE = 4), but if user accepted displayed messages then the database update is processed.
IV_DIALOG =B.- Technical errors will stop process immediately (RETURN_CODE = 4, message in EXP_OBJECT_SUBRC). With this option business errors will be collected into global table GT_OBJECT_SUBRC, filtered by message handler and exported; if there is at least one remaining error message
no database update is done (RETURN_CODE = 4) if there are no errors database update is processed (RETURN_CODE = 0).
IV_MODE = T.- Test mode, no database update is processed, RETURN_CODE = 0 -> update would be processed without any problems RETURN_CODE = 4 -> update would not have been processed with the given module list due to errors (all messages are collected into ET_RETURN).
IV_MODE = V.- Database update is processed if no business errors are detected (such as VSR rules).
IV_MODE = F.- Database update even if business errors are detected (Overriding rules).

Similar Messages

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Problem with Localization of Crystal Reports

Post Author: raj20007
CA Forum: Crystal Reports
Hi everyone..I am having a problem with crystal Reports. I need Malayalam unicode( INDIAN Language) to be displayed in the reports, this data will be binded from database.And the problem is : After applying this unicode font to the labels of my reports, some labels in the reports are going invisible.Also, previously if I increase the font size beyond 22, I used to get "A Generic error occured in GDI+". But after changing the textformat property of the field to "crRtfText" from "crstandardText" , I could resolve this Generic Error.
And, I could also observe that the last char of the fields in the "details" section is repeating.This is the code I am using to apply local font to the labels.
Private Sub assignfont()
Dim Mfont As New Font("kartika", 20, FontStyle.Regular,GraphicsUnit.Document)
CType(Report.Section8.ReportObjects("Field45"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
CType(Report.Section8.ReportObjects("Field48"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
End SubAnd I am calling this function in the form load event of that report.Any suggestion on this is greatly appreciated........Thanks in advance..

Thanks for replying.
Yes I am trying to move the 15mb of template files which are located in the Users Profile to a different location. I have modified the key in the Registry which defines this location: HKEY_CURRENT_USER\Software
Business Objects\Suite 12.0\Crystal Reports\ChartSupportPath=My Defined Location
I have done this prior to installtion and prepulated the registry and the templates in my defined location, but the installation over looks this and writes over the reg key. Even after modifying the reg key post installation, the application writes over this key and ignores what's in there. Does this mean that the Install.EXE is hard coded to always over write that location, and therefore the crw32.exe is hard coded to look in the User's Profile for the templates, and if they are not there it will create a copy for the User specific??
Thanks

Problem with business rule

Hi all,
I have a problem with a business rule (BR) deployed as a standalone Descision service.
the BR consists on a simple decision table wich compare an input (bigInteger) with 50. It returns two facts (as output).
the two conditions are confugured (i.e. <50 and >=50).
the Decision service (stateless) is called in a simple BPEL process. in some cases the the assign activity in the bpel process rise this exception :
<bpelFault><faultType>0</faultType><selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>empty variable/expression result. The XPath variable or expression /ns5:callFunctionStatelessDecision/ns5:resultList/ns6:processResponse/ns6:CodeRetour is empty at line 440. An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data. Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related variables to ensure the run-time data is valid. </summary></part></selectionFailure></bpelFault>
it seems like an output of the business rule used by the assign after the invoke activity is empty.
But in the input payload for the decision service all elements are not empty. I can't inderstand how the OBR return an empty variable?
Any help please?

In the taskflow you should be capable to trace step by step what happens in the execution. Does this give any clue, e.g. why sometimes the assert does not work?
cu
Andreas

Problem with Business Rules in OBPM 10.3.1 Enterprise for WebLogic

We're having a problem with our Business Rules. We've updated two of our business rules (that are used by business rule transitions) in Studio; however, when we publish the updated process, the business rules are not updated. We cannot find anywhere in the Process Admin where to administer the rules to make sure they're overwritten.
I've double checked, and the updated rule code is in the .project.xpdl, but for whatever reason, the rules are not being updated during the deployment. I'm sure that we've done this many times in the past, but for some reason, now it is not working.
We're tried variations of the different versioning when we publish, and we've also tried to unpublish all of the older versions of our process, but it does not change the business rules. We can try to unpublish and undeploy, but it seems like we would lose all old instances of that process that are still running if we did that.
Has anyone ever had this issue, or know if there is a way to effect the business rules via the process admin?

I see what you're saying, but here's why it works the way you're observing it.
Once deployed, the 10g business rules are edited by a business user (the owner of the rule). Changes in Studio that a developer makes to a business rule don't override the changes that the business user made.
To let the business owner edit the rule, add a Global Interactive activity and change its property setting to edit the business rule. Put this activity in the role for the business owner (the person you want to edit the rule).
Dan

Problem with Inventory stock audit Report in other currency

Hi I have a problem with Inventory stock audit, the SBO show me the report in local currency, and I have to obtain that report in other currency, I was working with OINM table, but I don't know how obtain the report

Alberto,
Other currency information is available at the document row level and in the Journal Entries.
What you could do is join the OINM with the associated document and let the foriegn currency value.
OINM.TransType = ObjType (marketing document)
OINM.BASE_REF .......Document Ref
OINM.DocLineNum ......LineNum
Suda

Pdf problem with Preview - how to report to Apple?

Hi,
I have been having problems with certain PDFs and Preview. The PDFs in question are scientific papers obtained via JSTOR (they manage the supply of papers from a range of Journals). In Preview many JSTOR papers display very slowly - so slowly that scrolling through the document is not practical. In Acrobat they are displayed normally, so this seems to be a Preview problem. There seem to be no settings in Preview that seem relevant to the problem, so how can I report this problem to Apple?
all the best,
Jeremy Harbinson

Hi,
So far as I can tell, I cannot attach a file to a posting to one of these discussion groups. A file which causes the problem can be found at
http://www.jstor.org/stable/3066865
Baroli, I and Niyogi, KK (2000). Molecular genetics of xanthophyll-dependent photoprotection in green algae and plants. Philosophical Transactions: Biological Sciences, 355;1385-94
Note that the problem only seems to occur with JSTOR files: the same pdf - this time in an easily readable form, and minus the JSTOR header page - can be downloaded from the Royal Society website:
http://journals.royalsociety.org/content/qpjabmqk0kxar5vb/
all the best,
Jeremy

ORARRP Problem with Oracle Forms and Reports 10g

hi,
i have a problem with orarrp utility. the printeroutput is sometimes mirrored or only a blank sheet. is this a known problem? are there any workaraounds available? what can i do to fix the problem? please help me.
thanks very much
gunnar kieck

Hi Rajesh,
But i have not installed IAS at all. I have only Forms and Reports 10g and Oracle database installed. As you said it only save on IAS, but can we save it on local machine. Is there any other alternative.
Again my second issues is --> I want to remove Mail option and rename Cache option to PDF from Destype combo box which appears at run time.
Any idea how we can do this?

Problem with scrambling rules

Good afternoon, I have a problem with the conversion rules, when I transfer the employee does not take into account any of the scrambling rules, those made by me and with the rules that I copied by CNV_TDMS_HCM_SCRAM transaction. I understand that this conversion is performed in the task to prepare data transfer. Someone can give me an idea that I may fail to do. Somebody has documentation of Scrambling rules? Thanks in advance.
Manuel Campos

Thank you, when I execute the program wherever Phase or activity ID that I select, for example PC001_RULES_MAINTAIN
It shows me this:
Rules for packege 90042
Rule Name                     Status         Active
CNV_MBT_BOP             red              check
INITIAL                           red             check
MOVE                            red             check
01_RVNUM_CK_DGT      red             check
99_HR_PEVAL2              red             check
99_PD_SEQ_NR             red             check
ADDR_SCRAM1             green          check
SAMP_SCR_DOM          red             check
SAMP_SCR_FIELD        green          check
In your package appear something like this?
I used transaction CNV_TDMS_HCM_SCRAM to prepare and maintain customizing for
scrambling at project or subproject level. And I made this:
To use the SAP template, choose Copy from other Project. You can now copy a scramble
definition. To copy the SAP template, input the following:
Pack ID: TDHSC
Project: *
Subproject: *
Process Type: R
Select the "Get from client 000" checkbox .
You can use a description prefix, for example SAP_, to easily identify elements. For
example, if you use this prefix and the name of a scramble group in the template is
HCM_DE_01, then after the copy the name is SAP_HCM_DE_01. This is useful for copying
in add-on mode into an existing project, because it helps you to determine what was new
from this copy.
Then I tried to use this scrambling rules copied, but They doesn´t work.
Thanks a lot for your help

Problem with Settelment Rule for iw32

Hi,
Good day guys
Iam getting the problem while creating the settelment rule creation. Ive got a problem with " wa_srules-SOURCE = '1' ".
If i wont fill this field, settelment rule is going to be created. but i need to fill this field as per requirement.
Ive got a error message "Enter an Existing source assingment for souce stracutre CS.
Plz any one guide me, how to overcome this prob
DATA: srules TYPE srules_ext OCCURS 0,
 wa_srules TYPE srules_ext,
 lv_mandt type SYMANDT.
DATA IT_OBJNR TYPE STANDARD TABLE OF IONRB WITH HEADER LINE.
DATA: ls_copadata type BAPI_COPA_DATA occurs 0.
DATA: ls_cobrb type standard table of cobrb with header line.
IT_OBJNR-OBJNR = CAUFVD_IMP-OBJNR.
APPEND IT_OBJNR.
break-point.
CALL FUNCTION 'K_SRULE_PRE_READ'
EXPORTING
 I_PFLEGE = ' '
TABLES
 T_SENDER_OBJNR = IT_OBJNR
* T_COBRA =
EXCEPTIONS
 WRONG_PARAMETERS = 1
 OTHERS = 2
CALL FUNCTION 'K_SETTLEMENT_RULE_EXISTENCE'
EXPORTING
 objnr = caufvd_imp-objnr
* FLG_LOCAL = ' '
* IMPORTING
* E_COBRA =
EXCEPTIONS
 RULE_NOT_FOUND = 1
 OTHERS = 2
CALL FUNCTION 'K_SRULE_CREATE'
EXPORTING
 i_objnr = caufvd_imp-objnr
* I_CHECK_ONLY_LOCAL = ' '
* IMPORTING
* E_COBRA =
EXCEPTIONS
rule_already_exists = 1
OTHERS = 2.
wa_srules-SOURCE = '1'.
wa_srules-settl_type = 'FUL'.
wa_srules-percentage = '100'.
*wa_srules-amount = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
wa_srules-SOURCE = '1'.
wa_srules-settl_type = 'PER'.
wa_srules-percentage = '100'.
*wa_srules-amount = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
CALL FUNCTION 'K_ORDER_SRULE_ADD'
EXPORTING
 object_no = caufvd_imp-objnr
* IMPORTING
* FLG_RULE_INSERTED =
tables
 srules = srules
IF sy-subrc = 0.
commit work.
Endif
Regards
Edited by: balaji kiran on Mar 26, 2010 10:18 AM

Hello Vitaliy,
Nice to "see" you here
I did try remodelling and it works fine here. A constant value rule really gets a constant value.
The user exit option also works fine here. Here's an example of a very simple user exit for a KF:
method IF_RSCNV_EXIT~EXIT.
FIELD-SYMBOLS: <l_s_old> TYPE ANY,
 <l_fillfield> TYPE ANY,
 <l_newfield> TYPE ANY,
 <fs_kfsource> type any.
* Assign the references to field symbols
ASSIGN c_r_newfield->* TO <l_newfield>.
ASSIGN i_r_old->* TO <l_s_old>.
* We will use the value of the 0AMOUNT KF. The value of the new KF is 0AMOUNT + 5.
ASSIGN COMPONENT 'AMOUNT' OF STRUCTURE <l_s_old> TO <fs_kfsource>.
<l_newfield> = <fs_kfsource> + 5.
endmethod.
For a KF, you can check the fields of the FACT Table (/BIx/Fzzzz) to know the field names for your source KFs.
Hope this helps.

Problem with Unix version of Reports

When I run the report(filenam.rep) off of
my P.C., it works fine. Then when I transfer
it over to Unix and run the report, I get
some of the values in my report copied into
places they don't belong. For instance,
I have a value for the last row and last column in my report that gets copied to the
first value in the last column of every page
except for the first page. The proper value
doesn't appear and it gets replaced by this
value instead. I am running Reports 2.5 on
both my P.C. as well as Unix. My P.C. is
an NT 4.0 workstation. My command line on Unix looks like this:
r25runm report=${report} userid=reitprod/namrem batch=YES paramform=NO \
buffers=1000 destype=file desname=${TEMP}.lis \
${PARAMETER_STRING}
I also have Designer 6.0 installed on my P.C.
I recently installed a patch to fix a problem
with formatting in Reports 6.0. I am wondering whether the patch might have something to do with incompatibility between
Reports 2.5 on my P.C. and Reports 2.5 on
the Unix system.
null

Hello,
We need more information in order to help. How are you requesting the report (command line, URL, ?). What file is it asking for?
Regards,
The Oracle Reports Team --skw
null

Problem WIth Variant in a report program

I have a z report program with couple of variants , the problem is the varaints display onlt name of the variant and description when the varaint button is pressed.
The changed by , date etc details are not getting displayed.
Thanks
Arun

Hi Arun,
You will not get those data directly from the program execution screen. If you want to get those details, please check table VARID for that variant or program.
Regards,
Sourav

Problem with checkboxes in IR report mainly for update process please help

Hello,
Can anyone please help me out with this issue.
I have an interactive report with 3 checkbox item for a single column named status. Based on the value of the column status the check box should be checked. For example:
DECODE(status,'DEV',1,0) as DEV,
DECODE(status,'RVW',1,0) as RVW,
DECODE(status,'PRD',1,0) as PROD,
So for this I have used the apex_item.checkbox item. Below is my report query
SELECT APEX_ITEM.HIDDEN(30,0,'','f30_' || ROWNUM)
 || APEX_ITEM.HIDDEN(31,0,'','f31_' || ROWNUM)
 || APEX_ITEM.HIDDEN(01,ROWNUM,'','f01_' || ROWNUM)
 || APEX_ITEM.HIDDEN(04,CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN,'','f04_' || ROWNUM)
 || APEX_ITEM.HIDDEN(05,CHF_STATUS,'','f05_' || ROWNUM)
 || APEX_ITEM.HIDDEN(06,CHF_STATUS,'','f06_' || ROWNUM)
 || APEX_ITEM.HIDDEN(08,CHF_STATUS,'','f08_' || ROWNUM)
 || APEX_ITEM.HIDDEN(09,CHF_STATUS,'','f09_' || ROWNUM)
 || APEX_ITEM.HIDDEN(11,CHF_STATUS,'','f11_' || ROWNUM)
 || APEX_ITEM.HIDDEN(12,CHF_STATUS,'','f12_' || ROWNUM)
 || APEX_ITEM.CHECKBOX (32,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f30'');"'
 ,DECODE (0,1, ROWNUM),':','f32_' || ROWNUM) DELETE
 ,CHF_COLUMN
 ,CHF_STATUS
 ,APEX_ITEM.CHECKBOX (07,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f05'');"',DECODE (CHF_STATUS,'DEV',ROWNUM),':','f07_' || ROWNUM)
 DEV_EDIT
 ,APEX_ITEM.CHECKBOX (10,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f08'');"',DECODE (CHF_STATUS,'RVW',ROWNUM),':','f10_' || ROWNUM)
 RVW_EDIT
 ,APEX_ITEM.CHECKBOX (13,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f11'');"',DECODE (CHF_STATUS,'PRD',ROWNUM),':','f13_' || ROWNUM)
 PRD_EDIT
 FROM CHF_COLUMN WHERE
CHF_DATASTORE = 'DOMAIN_DEV' AND
CHF_SCHEMA = 'SCHEMA_DEV' AND
CHF_TABLE = 'EMPLOYEEE'
ORDER BY 1; And I have a button for the update process so that the users can check the checkboxes option for the status column either 'DEV', 'RVW', 'PRD'. The status of the column can be in either of these states or can be null.
I have a update process, its having some problem - I don't understand whats causing the problem. Below is the error message which I encountered when trying to update.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
My Update process.
DECLARE
l_cnt BINARY_INTEGER := 0;
l_stepid number := 10;
l_date DATE := SYSDATE;
BEGIN
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
IF APEX_APPLICATION.G_f05 (i) = 1 THEN
 UPDATE CHF_COLUMN
 SET CHF_STATUS = 'DEV'
 WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
 l_cnt := l_cnt + SQL%ROWCOUNT;
apex_application.g_print_success_message := apex_application.g_print_success_message ||
'Successfully updated'||l_cnt ||' ';
END IF;
IF APEX_APPLICATION.G_f08 (i) = 1 THEN
 UPDATE CHF_COLUMN
 SET CHF_STATUS = 'RVW'
 WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
 l_cnt := l_cnt + SQL%ROWCOUNT;
apex_application.g_print_success_message := apex_application.g_print_success_message ||
'Successfully updated'||l_cnt ||' ';
END IF;
IF APEX_APPLICATION.G_f11 (i) = 1 THEN
 UPDATE CHF_COLUMN
 SET CHF_STATUS = 'PRD'
 WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
 l_cnt := l_cnt + SQL%ROWCOUNT;
apex_application.g_print_success_message := apex_application.g_print_success_message ||
'Successfully updated'||l_cnt ||' ';
END IF;
END LOOP;
COMMIT;
END;If you can please have a look at the app, you can get a better understanding of my problem.
Workspace : orton_workspace
username : [email protected]
password : sanadear
Application No: 15089 SAMPLE_CHECKBOX_APP
Thanks,
Orton
Edited by: orton607 on Aug 4, 2010 9:28 AM

I could be wrong but maybe change the hidden items to be like:
APEX_ITEM.HIDDEN(05,DECODE(CHF_STATUS,'DEV',1,0),'','f05_' || ROWNUM)
APEX_ITEM.HIDDEN(08,DECODE(CHF_STATUS,'RVW',1,0),,'','f08_' || ROWNUM)
APEX_ITEM.HIDDEN(11,DECODE(CHF_STATUS,'PRD',1,0),,'','f11_' || ROWNUM)so that the values are 0/1?
Also, you have
DECODE (CHF_STATUS,'DEV',ROWNUM)instead of
DECODE (CHF_STATUS,'DEV',0,1)in the checkboxes, as I would expect.
I'm also not sure why you need to duplicate the checkboxes (f07,f10,f13) as hidden items (f05, f08, f11) if they are both 0/1 values.

Problem with DATE in Interactive Report

Hello,
In Interactive Report when I click on the header of any column with DATE datatype, nothing happens due to Javascript error:
Line: 2
Char: 14838
Error: Expected identifier, string or number
Code: 0
Click on any other column works perfectly as well as sorting by DATE column from Action Menu.
I tried to set different format masks for my DATE column and for Application Date Format, but it didn't help.
Finally I found out that this error disappeared when in properties of my DATE column in "List of Values" section I set "Report Filter Date Ranges" = 'Past' instead of 'All'. In this case I get the list with values "Last 5 Years", "Last 2 Years", etc, but not with "Next Hour", "Next 2 Hours", etc...
Can someone help me on this issue, because this functionality might be usefull and also it's not very convinient to change this property for all date columns in all Interactive Report.
By the way, my database version is 9.2.0.5 - maybe it can cause such problem?
Best regards,
Vladimir

Hi Marco,
1) French Canada (fr-ca)
2) This filter works
More informations about the error when I call the function gReport.controls.widget():
&lth;div id="apexir_DT" style="text-align: center;" onclick="gReport.controls.widget(this.id)"&gth;Date de naissance&lth;/div&gth;
*************POST*************
flowid 48579
p_flow_step_id 5
p_instance 1412541985987586
p_request APXWGT
p_widget_action SORT_WIDGET
p_widget_mod CONTROL
p_widget_name worksheet
x01 5775894815382747091
x02 5775899227924757464
x03 apexir_DT
*************RESPONSE*************
{"dialog":{"id":"1966481623126322611","hide":["apexir_info","apexir_computation"],"coltype":"DATE","filter"
:false,"uv":true,{"dialog":{"uv":true,"row":[{"V":"Failure ORA-20001: get_dbms_sql_cursor error
ORA-00923: FROM keyword not found where expected"}]}}
Louis-Guillaume
Homepage: http://www.insum.ca
Blog: http://insum-apex.blogspot.com

Performance problem with Filters of Crystal Report

Hi,
I have been facing this problem for a month now.
Whenever I try to run a Crystal Report from Infoview it takes 5min or more to get the prompts screen
but sometimes(mostly when i restart all servers) the filter screen appears real quick say 5 to 10 secs(is this quick?)
I have no idea why this is happening! Is there an issue with the servers? or is this problem related to Crystal report?
Please help. I tried googling for this problem but could not find anything that would help.
Thanks
Nilesh

I am using a universe which uses a DSN to connect to the sql2k5 database. One thing I forgot to mention is that this is a clustered environment(with 2 servers) and the input/output file repository is set to a folder on a third server.
Note: Even though the report filters take time to pop up, but the report runs very fast; doesnt take more than 5 seconds for a fairly complex report.
Yesterday I did a trial install on a seperate server and the reports filters come up pretty fast.

Problem with academic rule in report

Similar Messages

Maybe you are looking for