Problem with adapter network category reverting to public after change to private

I noticed that after setting up HyperV Server 2012 R2, that after applying needed firewall rules to allow remote management, that these were added into the "Public" profile. So, I disabled them and enabled for Private and proceeded to change the
NIC which is internal to the LAN to Private as well.
All was good; however, after several hours... the network category reverted to Public on that NIC, which of course will not allow any remote management.
The firewall rules for remote management are only enabled for "Private".
I used: Set-NetConnectionProfile -InterfaceIndex # -NetworkCategory Private
Which works; however, what is causing it to revert to public after a given amount of time...

no domain for this HyperV Server 2012 R2, it's workgroup.
The management NIC is set for static IP. At first I did not apply a gateway nor dns settings for it and NLA automatically gave it the Public profile. After setting to Private via powershell, any reboot or after several hours, it would
revert.
So, I set a gateway and dns to a VM that is running on that server which runs those services for other subnets. I am guessing that after a reboot, NLA discovery is not respecting the static properties and changing the profile to public. Perhaps
due to the VM is still spinning up?
I cannot find a way to get NLA to respect the static properties "and" profile for itself.

Similar Messages

Time Machine and "might be a problem with your network"

Hi! My Power Mac is from 2008, and I'm in the middle of replacing my hard drive. Here's a summary of what I've gone through, including various trouble shooting...
OK, the hard drive dies (all of which I wrote about in an earlier thread and, I think, not very relevant for this thread). While waiting to buy my replacement, I created an external bootable drive, hooked up via FW800. I created a new User Account, and then I used the Migration Assistant to bring in all the user settings, files, etc, from my Time Machine. It took many hours and and during the stage when it was transferring files, it gave me the prompt: "There might be a problem with your network. The other Mac is not responding. Make sure that all of your network devices are connected and turned on. Also, make sure that your Ethernet cables are still connected properly to your computer and to the network, or if using AirPort, that the base station is in range and turned on." After clicking "Continue" got me nowhere, I clicked Cancel, and it was a very incomplete migration [no apps, no files]. I didn't sweat this since this external drive is a temporary solution anyway.
Tonight I came home with the new internal drive, installed it, installed Leopard, and began the Setup Assistant. I got the same prompt as last night. NOTE: This time with Setup Assistant; last night was with Migration Assistant.
I notice from reviewing the boards that this Time Machine glitch seemed to happen a few years ago, in Leopard, and maybe hasn't happened since. But I haven't read a thread with a solution. (Maybe I missed it?)
A few things come to mind:
1. Could there be an issue with the fact that the computer is only 10.5 and many of the files/apps may have been installed when I was running 10.5.8? I'm just tossing that out there. For instance, what if I set up an initial User account, then updated the software to 10.5 and THEN used Migration Assistant to bring in the older account?
2. Soon, since I'm reinstalling Leopard, I'll get the prompt to use Setup Assistant, and this time I'll just select account settings and apps. I'll bring in the files manually, later. Since the progress window seems to get hung up during the file-transferring stage, maybe I'll have better luck if I skip that.
If anyone has any suggestions, man, I'd be way grateful!
Thanks!

"try trashing the timemachine.plist in your original user's Library>Preferences."
I didn't even get to that step. Here's what happened.
I went back to my original Admin account (the one I restored via Setup Assistant, from my Time Machine backup), and ran Migration Assistant again. I selected Applications only and when it gave me a prompt about the account name already existing. So, I created a new account name (TEMP 1, I called it).
All of my applications were restored.
Next, I tried it with all the files and folders. It didn't give me the duplicate name prompt this time. It copied all my flles and folders over.
Was it perfect? Well, a lot of the apps need some fresh registration and some upgrading, but I suppose that's to be expected. Or is it?
While I feel like this problem is in my rear-view mirror, I'm still interested in your suggestons for a Time Machine altenative.
Thanks again for your advice!

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Is there problems with the network/signal in TA3 Taunton area

Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

The problem with the network card.

The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.

Pawełek wrote:
The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.
This confusing which one are you asking about?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

Problem with adapter

hello
running a sync service and recieve this error.
couldnt determine if this is XI problem or WS.
if it is XI, how can I debug it?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xip.mgnt154</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Hi,
This merely problem with cache. It is saying XI engine is not able identify the adapter engine URL.
please do this.
You can view the cache data in
transaction SXI_CACHE. To do this,
select Go to &#56256;&#56518; Adapter Engine
Cache.
You can delete the cache data in
transaction SXI_CACHE. To do this,
select Go to &#56256;&#56518; Adapter Engine
Cache. Then choose the recycle bin
push button ( ).
Thanks,
Gujjeti

Problem with " Account assignment category"- Services

Hello expert,
I have a problem with the order positions type " D" (Services). At the moment that I indicate that value in the field " Item category in purchasing document" , the field " Account assignment category" he becomes gray, preventing that can be modified later. What could do so that this field is modifiable in the future?
Thank you!!

hi
1. Go to Tcode- OMH4,
Maintain Acct assignment as "Possible" instead of not possible for Item Category "D"
2.Go to Tcode - OMG0
Here maintain Various Combinations of Item Category "D" and Account assignment Categories.
Then, Acct Assignment Category field in PO item overview will be open for Item Category "D".
Hope it helps,
Regards,
Rahul
Edited by: RahulNsk on Jun 5, 2009 2:03 PM

Problem with wifi network.

I've had my macbook pro for a little under a month and have had no problems with it up until this weekend. The problem is this; whenever I try to log onto a wifi network, the computer says that I'm connected but when I go to open Safari it says that I'm not connected to the internet. I've run a network diagnostic and it says that nothing appears to be wrong with the connection. Usually if I turn off my wifi and turn it back on I can get my connection to work but it usually takes a few tries. I've had the same issue both at my house and my parents' so the issue seems to be with my computer versus with a specific wifi network...any suggestions?

System Preferences > Network > WiFi/Airport > ( Assist me ) ...
... only this time, choose Set up again from scratch, including a new Location and answer the questions to set everything up again.

Problem with carrier network

I have a problem with mi iPhone 5s 64 Gb, time to time The carrier network still looking for network and some times it tooks until 2 minutes to find the net, im compare with friends to understand if this is a general problem with the carrier servíce but 1) some of them have the same phone without a problem using the same carrier, and 2) the must funny thing is that im working with the carrier company, so im really angry with this, i want to change my phone, i have images with the problem because this is really too much.
Are you going to help me? Or do i need to change mi phone!!!!!!!

This is just annoying!
Same thing in Germany! Updated my Iphone 6 (128gb) to Ios 8.0.1 late in the evening. Couldn´t restore it because of the traffic on Apple´s Server.
Now I´m sitting at work with my Ipod (lol) and just mentioned that even the Artwork of Movies or Music is lost. Just grey boxes.
This is not Apple anymore!!!
Is this the "just one more thing"?! --> Next time I will think twice before buying some stuff of apple!!

CSM problem with Adapter Teaming

Hi,
A CSM has been configured with a TCL scripted keepalive to retrieve a dynamic page from each server in the serverfarm. The script reads the data returned by the server and detects a specific string in the page.
The servers are dual-attached with two Broadcom NetXtreme Gigabit adatpers, configured with BASP Teaming (Smart load balancing with failover). This mode of operation allows outbound and inbound load balancing. Each adapter has its own MAC address.
Symptom :
We observe that the servers status swing between OPERATIONAL and PROBE_FAILED at random intervals. We suspect that the problem comes from the adapter teaming mode of operation. We see the CSM ARP table swinging between the two adapter MAC addresses for a specific IP address. I conclude that the CSM updates its ARP table for unicast packets as well.
When the ARP table points to the primary interface, the server status is OPERATIONAL, when the CSM ARP table points to the second adapter, the server status go to PROBE_FAILED.
Is is a know issue ? Is the CSM incompatble with adapter teaming ? We also have CSS devices probing the same servers at the same time, but without problems
Thank you for any advice
Yves Haemmerli

It is not a CSM trouble but more a teaming trouble.
If you connect trought the console management instead of telnet you may see message like this one:
xdxh: %CSM_SLB-6-RSERVERSTATE: Module x server state changed: SLB-NETMGT: Got different MAC address from server x.x.x.x in response to ARP
If you have that kind of message it meens that the server is using both interfaces for the same IP address.
If it is the case you should have a look to your teaming configuration.

Facing Problem with Adaptive Web Service Model

Hi All,
I am consuming adaptive web servcie model. It is created from a lcoal web service i.e deployes on a web service. When i run from WS navigator it works fine.
When i consume WDJ it is erroring out. The method is written an array of bean methods.
The error i am getting is -- java.lang.IllegalArgumentException: Target role name 'Response' not defined for model class 'SearchInvoiceByNumberResponse'
Please help me, have a very tight delivery....
Thanks
Supriya

Hi All,
I did re-imported my model but no help. There are 5 business methods in my EJB. three methods returns integer value and other two methods are selecting the data which returns bean type. One is bean type and another is of bean array type.....
I have problem with only these two...........................these two methods errors out when try to consume through adaptive web servcie model....are there any pre-requsisties i should take care offf.....
Help me out................
Thanks
Supriya.

Problem with Adaptive Web Service model

Hi All,
I am trying to create a model using Adaptive Webservice.
While I am deploying the application I am getting the following warning message.
I cheked the web serivice throw WSNavigator, It is working properlty.Nov 27, 2008 3:34:56 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[040]Deployment finished with warning
Settings
SDM host : infpu05445
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Result
=> deployed with warning : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Finished with warnings: development component 'testw'/'local'/'LOKAL'/'0.2008.11.27.15.34.48':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/testw and wait. Reason: Clusterwide exception: server ID 12403050:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/testw'' for startup. Reason=Clusterwide exception: Failed to start dependent library ''tc/wd/wslib'' of application ''local/testw''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
     at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : Got problems during deployment
Can you all please let me know is the problem with model creatuion or Web Service configuration.
Thanks,
Archana.

It seams that the component 'tc/wd/wslib' is not well deployed on your server. You should redeploy it on your server.
-Go to nwds, Development infrastructure perspective
-Expand the FRAMEWORK item, there is the 'tc/wd/wslib' normally
Deploy :
-Open the menu Window > Show view > Other and open the Undeploy View
-In the undeploy view expand the FRAMWORK item and locate the tcwdwslib (it ther is no such application, then go directly to deploy steps after)
-Add the to the undeploy list (+ button)
-Click undeploy (blue button near + button
When it is undeployed, you can redploy it:
-In the Componenet Browser, locate the 'tc/wd/wslib' in the FRAMWORK as befor
-Right-click and click Deploy and click OK
If it not working, try the same (undeploy/dredploy) with 'tc/wd/wslib/api'
Check also that the dependencies of your project should have 'tc/wd/wslib/api' and not tc/wd/wslib/
Hope it will help you
Quentin

Problem with adapter network category reverting to public after change to private

Similar Messages

Maybe you are looking for