Problem with add a field

Hi,
We have a problem in the KE30. We copied a field but didn't appear the same options that in the original field. In the original appear a table with 4 options but in the field new only appear one and without a description. The table is PAPARTNER and the original field is VRTNR and the new field is inside of an include MCPARTUSR.
I hope someone can help us because is very wreid!!!

Is your new field using the same data element as the field VRTNR does? The VRTNR on the PAPARTNER structure is using the data element VRTNR which has a search help attached to it which is 'PREMV'. There is a search help exit in this 'HRMC_PREM_EXIT_A'. May be there is some code in there that is restricting the data.
Regards,
Srinivas

Similar Messages

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Problem with add fields in KOB1

Hi,
I need to add some fields in the KOB1 report for Display Actual Cost Line Items for Orders, i have tried change the Customizing include CI_RKPOS with the new fields and the includes ZXKAEPTOP, ZXKAEPU01 from EXIT_SAPLKAEP_001. The problem is that the new fields are marked with 'X' in the fielcat-no_out and not appear in the report. How can i change this fieldcat or do that these fields appear in the report.
Thanks.

Hi,
do like this
1) there is a view covp go in to that open table/join tab COEP table in that one include is there CI_COBL
in this include put your custome fields.
and activate it.
2)open se37 tc and run this RS_SEL_OPTIONS fm and exe cute it click on creat button and you can able to give group no in the sceen with the fields which you need to display. then save it.
3) run kob1 you will get it

Problem with a Currency field in Adhoc Query - HR

Hi,
I have an Adhoc query that uses Custom infotype fields (Z infotype and z fields).
The currncy field also has a reference field in the infotype (of type waers).
Wehen we try to get the ouput of the Adhoc Query it gives following error:
The report cannot be generated because the internal description is invalid or incomplete, or because the selection screen is too large.
Regenerate the assigned InfoSet, and read the log. If the InfoSet is OK, make sure that at least one field is given as output.
If you used the 'Refresh' icon to start the query, use the 'Output' menu option to execute the query. This gives you a full screen display of the data.
If an output was generated, the query cannot work with actual data in the construction view. In this case, always use the 'Output' function to execute the query.
I have already tried a number of solutions:
1> Regenerate the infoset...
2> make the field as an additional field and write my own code for it (the error comes before the code as i kept a breakpoint but it stopped before that)
if i add other fields of this infoset instead of this field, then those appear in the output.
Any solutions ??
thanks in advance,
Anuj

Hi,
Is the problem not clear or no one has an answer?
Please reply with some suggestions..
Regards,
Anuj.

Problems with the 'Comments' field in iTunes

First, sorry for my english (I'm danish).
I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
But the problem is with the 'Comments' field:
Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
And there's also a different story:
A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
THANKS!
Doug

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Problem with SAPbouiCOM.EditText field

Hey Everyone,
I am experiencing a problem with an edit text box on a form that I created. For some reason when I go into the add mode on the form and type into the field the text disappears as soon as I go to another one of the controls on the form.
If i leave the cursor in that text box the text stays. Has anyone experienced this problem before?
Thanks in advance.

Laura,
I had this problem and the reason was about the datasource.
If you item is linked to a UserDataSource, there is no problem.
If you item is linked to a dbdatasource, you have to ensure the datasource contains at least one record.
Can you show us the part of xml file, or VB code that you use to create your item on you form.
the event that you can catch would be et_validate. But I think it's fired when your text box is linked to datasource
HTH
Sebastien

Problem with ME_PROCESS_PO_CUST setting fields to update..

I try to add new fields to a purchase order, everything works fine, I added the fields in CI_EKPODB and CI_EKPODBX
also changed structure ZPO_CUST_FIELDS and changed the screen in SAPLZ_PO_CUST_FIELDS
ME_GUI_PO_CUST is implemented ( it already was since we already had custom fields)
in ME_PROCESS_PO_CUST we have FIELDSELECTION_ITEM where I can set if the field needs to be editable or not.
for 1 field that has happenend in the past and the code reads
IF gt_trtyp NE 'A'.           " Transactietype <> Weergeven
    READ TABLE ch_fieldselection ASSIGNING <fs>
         WITH TABLE KEY metafield = mmmfd_cust_10.
    IF sy-subrc EQ 0.
      <fs>-fieldstatus = '.'.     " Veld is wijzigbaar
    ENDIF.
ENDIF.
when I check out the mmmfd_cust_10 I see that it is somehow linked to the old custom field
now I added more custom fields but I can't find there needed mmmfd fields ??
do they need to be generated somehow ? I can't find anything in the documentation or sdn about those fields ?
so the fields are visible in me22n but I have to set them to editable ! if there are more sollutions to this problem I'm glad to hear
kind regards
arthur de smidt

I was under the impression that the mmmf fields were added when new fields were added. seems that you can only use the 10 fields available

Having a problem with Add-ons I did not install and now can't uninstall.

Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
PLUG-INS-
Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
Mozilla Default Plug In
(THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
Itunes Application Detector 1.0.1.1
Itunes Detector Plug-In
Wacom Dynamic Link Library 1.1.0.3
Wacom Dynamic Link Library
Windows Presentation Foundation 3.5.30729.1
Windows presentation foundation (WPF) plug-in for Mozilla Browsers
EXTENSIONS_ Java Console 6.0.23
Java Console 6.0.20
(Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!

For camera problem try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
I do not understand what you mean about your update problem

Weird Problem with Add Row Button in Master Detail Page

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

Contract - problem with attachements (empty field in LOIO_OBJID)

Hi Guys,
We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
LOIO_CLASS: Normally filled with BBP_L_DOC
LOIO_OBJID: Normaly filled with a GUID size datastring
Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
Can anyone give us advice about two things.
1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
2) Does anyone know why this problem occurs and how to fix it for new contracts?
Hope to hear from you,
Arie

Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
W_ENQUIRY_ITEM_INX-ITM_NUMBER = THEAD-ITEMNO.
      W_ENQUIRY_ITEM_INX-UPDATEFLAG = 'X'.
      W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
APPEND W_ENQUIRY_ITEM_INX.
CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
   EXPORTING
   SALESDOCUMENTIN               =
     INQUIRY_HEADER_IN             = W_ENQUIRY_THEAD
IMPORTING
    SALESDOCUMENT                 = W_NUMBER
   TABLES
    RETURN                        = W_RETURN
    INQUIRY_ITEMS_IN              = W_ENQUIRY_ITEM
    INQUIRY_ITEMS_INX             = W_ENQUIRY_ITEM_INX
     INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

Problem with a Form field, need help

I work for a small police agency and I am our IT guy. Most of my IT tasks have many been hardware and system software and networking. I have been trying to learn and teach myself programming. I also create forms for agency use. I have been working on a form and want to add increased functionality to allow our officers to issue a citation with the least amount of time spend on the form. One main issue is that we have to have a unique citation number. We have come up with a format that will specify as such: YYYY(Officer's 4 Digit ID Number)-(Auto Incrementing number). So, for instance, if this is my 55th citation issued and my ID number is 0100 the citation number would appear like this: 20120100-0055. The ID number will be entered by the officer earlier in the form. The problem I can't seem to vision around is how I will keep the number to increase by one and have it maintain that way. I want it to be form specific, because each officer has their own vehicle and MDT that the PDF will reside on at this time.
So far, what I have toyed with in the past 30 minutes is this:
var Ticker = 0001;
var Year = getFullYear();
var x = getField('OfcIDNo').value;
Eventually the form will be autocreated by a program that will be run from a centralized server. I have even thought about running the from from a server and taking all the data and INSERTing it into a SQL Server 2008 Express DB table on a server, but I'd still have to have the citation number created at the form as the officer fills in the data. The last four of the number doesn't have to reset when the year changes, but it would be a plus. Any information anyone can help with I would appreciate it.
Thanks in advance

Seems like it was too easy, is it safe to assume that javascript and javascript functioning in Adobe PDF is a bit different learning curve? That does help, the only thing that I'm missing is the Auto Incrementing 4 digit number. I was toying with assigning a variable in the globals that would auto increment but having problems with how I would execute it. Each copy of the form would be installed on each officers MDT so the number would be specific to that officer. The format will be YYYY"OFCIDNo"-####. I would like to assign the number to the global variable on the execution of the Print Dialog. This way the officer an clear the form if he/she needs to start over and then it stays whether or not they close the file and reopen it.
That syntax has been very helpful to get started.
Thank you,
David

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problem with add a field

Similar Messages

Maybe you are looking for