Problem with Adware - Firefox for MAC

I keep getting adware pop ups from cpxinteractive adware. Anyone figure out how to remove these?
I'm running Firefox on my Intel based MAC. Firefox version 5.0. MAC OS X 10.5.1.
Is Safari better at blocking adware and spyware programs?
Help!?
Thanks, Jim

Hi Jimmy
Is Safari better at blocking adware and spyware programs?
Not necessarily. I call it about even.
A good Safari add-on for effectively blocking sites/ads is PithHelmet.
For issues affecting Firefox (latest version is Beta 3), please post here.

Similar Messages

Problems with Office 2011 for mac after upgrading to Mountain Lion

Office 2011 for mac worked fine with Lion on my MacBook Air. I had been having some problems with my computer freezing and crashing, so the folks at the Genius Bar wiped my computer clean and installed Mountain Lion for me.
I have full backups (Time Machine) from before the wipe on my external hard drive, but I was told not to restore from the backup, that I should drag and drop files instead. I was also told to re-install any program for which I had the disk. I reinstalled Office 2011 via the disk.
Two major problems followed:
1.     I lost all my old emails (I use Mail). Even rebuilding the library or trying to restore them from Time Machine don't get them back.
2.     Word and Excel don't seem to recognize me anymore. I can pull up and modify an old document or workbook, but I cannot "save" my changes. I have to hit "save as." That's a pain, but there's a worse problem.
I have no trouble saving these "save as" versions to my desktop or to my Documents file. But I cannot save them anywhere else — even to the folder where I found the original document. I get a message that I don't have the necessary permissions to access or modify the folders. I'm asked to authenticate, and I do, but that doesn't seem to do anything.
I tried Get Info on the workbooks and documents, and I'm clearly granted Read and Write permission.
I've done a permissions repair via Disk Utility. There were some things to repair, but it didn't solve my problem.
I know I can move all documents to an external hard drive and then recreate all the folders, saving all the documents and workbooks "as" but it seems a huge amount of work. Can anybody suggest an easier route or how to get my email history?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Problem with Entourage 2008 for Mac

I don't know if this is the right forum, if not please direct me to where I should go. I have Entourage 2008 for Mac. I continue to have a problem with the font reverting back to Calibri when I am composing an email. I've set up in Preferences the font I want, but it doesn't seem to work. Anyone have any suggestions? Other than give up entirely on Apple and go back to a PC????? The whole Office 2008 program is horrible and whoever designed it at Apple should be fired.

I don't know if this is the right forum, if not please direct me to where I should go.
Microsoft's own forums for their Mac software: http://answers.microsoft.com/en-us/mac
whoever designed it at Apple should be fired.
Ummm...nobody at Apple designed it. It's a Microsoft product.

Sync problems with AME CS4 for Mac

Hi,
I've been trying to use Adobe Media Encoder CS4 to convert a 2 min video (MPEG2 Muxed, 29.97) to FLV/F4V, and the audio still does not sync to the video. I've tried in Sor. Spark, On2VP6, and H.264. I can't imagine it's a fps issue because in the Settings I always choose "same as source". Is there something else I should do that I'm not doing thus far?
For what it's worth: I'm using version 4.2.0.006.
Thanks in advance!
Dave

Thanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli

Print Problems with Elements 9 for Mac

I cannot print borderless (randlos) on format 10 x 15 (or any other) on my Printer Canon PIXMA MP970. With Elements 8 for Windows there is no problem. I have tried any possible combinations of adjustements and have the lates printer driver installed.

10 x 15 cm is a standard European paper size but the choice ist not available in the paper size selection. The choices avaiIable seem to be only American. I have to define it as user defined (Benutzerdefiniert). I have contacted Canon but they have no solution for this problem. It seems that PSE 9 for Mac and Canon printer drivers don't like each other. A least the German versions. With PSE 8 for Windows everything works fine. There the standard European paper sizes and borderless printing can be selected with no problem. As mentioned in other topics rotating is although a problem. Lucky enough I have also a Windows system with PSE 8.

Problem with MS Office for Macs, can someone please help?

I am using MS Office for Macs 2011 on my new MBA, and have encountered a pretty annoying issue when I transfered all my Excel, Word & PP documents from my old Sony PC. When I open an Excel spreadsheet for example, the computer also opens every single OTHER speadsheet. Since I have over 30 Excel documents, this obviously becomes very annoying and time-consuming! The same thing happens when I try to open a Word or PP document. Is there some setting that I need to change to have only the document I actually want to open? All the documents were created on older versions of MS Office, but I doubt this is the problem. Can someone help please? Thanks!

You could also try deleting the microsoft preference files, incase something has gone amiss there.
Make sure all Office application are quit fully
Go to User/[unername]/Library/Preferences
Look for
com.microsoft.Excel.plist
com.microsoft.office.plist
com.microsoft.Word.plist
com.microsoft.Powerpoint.plist
Outlook is there too, so if it is causing you issues, you can delete them too
Next time you open your office applications, the new prefernce files are created. Any particular preferences that you had set will of course need to be reset as they are now all new (default) again.
Another thing to check is in you System Preferences - General
Do you have the 'close windows when quitting an application' checked? if not, checking it may fix the issue.
Message was edited by: actionmarker
Added second tip

Serious problem with Powerpoint 2011 for MAC

Hi, if anyone can help. We are a team of designers who work on Apple Macs, we use Powerpoint but have serious issues with the decks. When we move the deck window around the screen, it fragments the screen, leaving us unable to do anything else. Once this
happens, we have to re-start our Mac each time, this becomes very time consuming. Thanks.

Hi,
We support Office for Windows in the current forum, since this question is about Office for Mac, I suggest you post the question in Office for Mac forum:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problems with editing Powerpoint for Mac in Office 2011

First time posting,
I seem to have delayed functionality in editing slides. e.g. inserting shapes/text boxes/table etc, can be viewed, but on next slide I try the same and it is not visible, but may appear 5 minutes later when editing. Also can not see some detail on preview, but they will then print out. Incidentally when I send a file I have been working on to a PC, I can then see the various inserts I have made with no issue.
I have Mac OSX version 10.7.5
3.06 Ghz Intel Core 2 Duo; 4GB 800 MHz DDR2 SDRAM
and Microsfot powerpoint for Mac 2011, version 14.4.5

As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

Problems with Reading Word for Mac attachments

I have just 'switched' my wife from a PC to a Mac Mini. She is using Mail to send out attachments and some of the recipients are unable to read them. They are getting the message "can't start converter mswrd632". Using a similar set up with my Mac Pro I am not getting the same issues!
Googling the message I understand that this relates to a Microsoft security upgrade MS09-73 but I am not able to understand why her machine has the problem and not mine!! Both appear to be sending .doc suffixed attachments.
As the Mac champion in the household this is now 'my fault' and any guidance would be welcomed.

Are you sure that your wife is actually sending out Word documents? The error is due to a document having a ".doc" suffix but is really a text file.

Problems with Microsoft Office for Mac 2008

Hi,
I replaced my old mac around two months ago so I now own a Macbook Pro with Lion. Since then, whenever I open Microsoft Word, or a previously saved document, it also opens other documents I've saved since I bought the laptop. However, this does not include the documents I managed to retrieve from my previous Mac.
Is anyone aware of a way to prevent this happening?
Thank you

I'm sorry, but I have the same problem and neither the article indicated or using First Aid on the keychains have fixed it - problems occurred after installing Office 2008. What else can I try?
Regards
mjf

Problem with ms word for mac 10.6.8 with mac OSX 10.6.8

I am using ms word mac 10.6.8 with mac OSX 10.6.8 and two times now I have edited a document, tried to save it and it froze up. The error message is "command is not available b/c the document is in modal state" Any suggestions?

Try not to double click when you post in the Communities. Your thread became a duplicate, and an answer may appear in this thread:
https://discussions.apple.com/message/17498901#17498901

Problem with Yahoo Messenger for MAC

my yahoo messenger was working perfectly till today. it refuses to automatically scroll down to the latest or newest message. i have to manually scroll down each time i wanna read a new message which is extremely inconvenient & annoying. how to i go about resolving this problem?
i tried uninstalling yahoo messenger by dragging the yahoo messenger icon into the trash then download & reinstall yahoo messenger from scratch but problem still persists.
i'm very new to mac, only got my macbook 4 days ago. any help will certainly be appreciated.
thank you.

Perhaps emptying the Caches would help, actually I'd do more, and my preferred method is to use Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.

I am having problem with My CS5 for MAC Serial Number.

Once I star installation it ask me to enter the serial number which I obtain from the adobe reseller in Dubai - After completion of installation it ask me again to enter the serial number and then an error comes :- THIS SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT.
Even I uninstall and reinstall twice & thrice the problem is remain same.

Call support by phone.
Mylenium

How can I fix problems with Bridge CS2 for Mac.

How can I upgrade Bridge CS2 version 1.0.0.545 to Bridge CS2 version 1.0.3. The Installer says that I have a newer version installed. I am running a special version Photoshop CS2. When I launch Bridge CS2 v.1.0.0.545, I get a window saying that "Sorry, a serious error has been detected." This software stays open after clicking the OK button. Please help!

Spent a long time on phone with Apple tech support on this. Here's what users all need to know: it's likely the car manufacturer who needs to upgrade the vehicle software. Pairing problems can happen whenever a phone is upgraded. Now to find a dealer that's open after work!

Strange problem with Office 2004 for MAC. Dates incorrect... anyone seen t

Hi,
It seems that Dates are being changed to wrong dates on EXCEL files
Ex.
8/11/07 becomes 8/12/2011
Anyone sen this bug?

Best answered at the Excel forum: http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

Problem with Adware - Firefox for MAC

Similar Messages

Maybe you are looking for