Problem with authorize my computer
Hi I am having problems with the authorization of my computer every time I go to "shop" "authorize computer"and the itunes asks me apple ID and password and I type it and later itunes says that this computer is Allow 1 of 5
but when I go through my applications that I bought in itunes store the itunes says tah my computer is not authorized...
What can I do to pass applicatives to my iPhone?
I'm also having the same problem. They started after I replaced a hard disk.
i-tunes wants authorization and gets...tells me the computer is already authorized and refuses to recognize the phone. If I run the sync it cleans out all of the apps from the phone and wont send any to the phone.
Similar Messages
-
I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer.
Now my computer is stuk on restart and wont turn on.
Can somone help me with it?
Thanks.If Mende 1's suggestion doesn't solve it you might find the following useful:
I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Hope this helps -
Hi
I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer. Any suggestions.? Anyone have any suggestions?
-
help
Unfortunately I am running in circles as the result is the same.
Thank you for the link but I have already had this page provided to me by my school. Nevertheless, I followed your advise, downloaded the latest version once again and restarted my computer. Again, I am not able to get my computer authorised, with or without an ID. I get either of the two messages : 1) Microsoft tells me there is a problem with my computer. 2) Adobe tells me I have no internet access and in order to proceed I should gain internet access.
That is the reason why I have today purchased an AVG software. I have additionally purchased the service of having the AVG software installed on my computer by an AVG representative remotely by allowing him temporary access to my laptop. Subsequently he installed the software successfully, run all necessary checks, optimised my computer and there are currently no problems with it whatsoever.
I have then asked him for this additional favour to watch me trying to download the e-book using your software, just in case I am doing something incorrectly. He agreed and upon my attempting to download the e-book again, the same problems occurred. He followed the steps himself - again no joy. He then advised me to ask Adobe for help. In his opinion the program Adobe stops responding and there is nothing more he could do to help me. I had his reassurances that my computer is in full working order and the problem does not lie here.
I am back to you asking you for help. I am attaching here photos of the two messages that keeping popping up whenever I try to download the e-book.
Is there anything at all you can do to help me? I quite need this e-book for my exam which is fast approaching. I would be really grateful if you could sort something out...
Thank you in advance. I look forward to hearing from you.
Stela -
Problem with Authorization for Planning folder
Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
AbrahamCalling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category Internal Kernel Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
An error occurred during the receipt of a complex parameter.
What happened?
During a remote function call, an error occurred while converting
a complex parameter.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An error occurred during the conversion of a complex parameter. -
Problem with Authorization for BW BPS planning Folder
Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
AbrahamHI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham -
Problems with authorizing my computer
I authorized my new computer, but every time I try to play a song purchased with an old account, it tells me I need to authorize this computer. But when I type in my username and password, nothing happens. Then I try to go to Store, authorize this computer, and the prompt tells me this computer is already authorized!!!
Its very frustrating, and I've got about 1000 songs I can't play!
Any help would be GREATLY appreciated.
thanks!Hopefully someone will answer soon. I am also having an issue with a song I just recently purchased.
I purchased the song on my iPhone, iTunes automatically downloaded the song when I started iTunes. Tried playing the song withing iTunes and it says this computer is not Authorized to play this song. Then prompts me to log in and nothing happens. -
More Problems with my new computer
Well I'm beginning to think this new machine is acting very much like what happened back in 1996-97 when I rebuilt a Packard Bell Legend 1956 only to have the computer croak better than either a frog or my cartoon namesake on "South Park" because the recovery disk didn't recognize the new componentry.
after I thought I revived it with this forum's assistance. after 5 days it started acting up with "turn off computer" icon going AWOL. since I didn't have a backup I went to system restore which promptly froze midway thru the process.
so what I did was to take out my Digital Lifeguard software and try and reconfigure the I:\ drive to a C:\
eventually it said that Windows couldn't start because it needed a pci driver.
so on July 5th a technician showed up & it came back.
now on the 11th when I started it up. & changed the secondary drive to a C:\
so now I figured why not reformat the I:\ & and put XP Pro on the C:\ so my programs won't start a revolt
especially since I only had 1 day left before activation.
Now the computer is in an infinite loop saying that Windows cannot install because the hard drives are not available to install the temp files.
by thw way the chip head was wondering why both of the optical drives were on the master cable & the HD's were on the slave. he also warned me that this computer's configuration was problemaic and I will have errors.
I wanted this type of computer because I wanted to know what was the differences between an OEM & a custom built especially since they recovered quite differently as well.
In retrospect, I think I would've did much better with another OEM because I would've had recovery CD's/DVD's
and for 1 year tech support would've help me thru the transition from the old one to the new.
I've been reading the manual to this motherboard trying to figure out how to not send this computer into orbit along with the shuttle! & wasting $1600. so far nary a clue could be discerned.
the builder says that I shouldn't of tinkered with it and run the computer as he built it but the way I see it 1. If I didn't tinkered I would not be advancing my computing frontiers. 2. I would be a hostage to the builder & that is unacceptable because I would rather try & solve this myself than either pay good money waiting for somebody to fix it.
Thanks yet again
spacechild(Ken Greene)
PS. as far as the registration goes I guess I'm screwed yet again because of no receipt but this reinforces my point about being dependent on somebody else.
I appreciate very much all the efforts you've done for me as far as this computer goes
spacechildTo Maesus, Emperor & Blazer:I have the MSI 925XE Neo Platinum 54g
& I plan to use both of the Hard Drives meaning RAID 0.
and the 11-1 card reader is an ATF Pro 9 model
in addition my Power supply is a 450 watt Xion model with 18 Amps at +12v
if that further helps you.
Last night when I attempted to solve this I got this at the end of the startup process
"Windows XP Professional Setup"
"Windows cannot find the temporary installation files"
"The Hard Drive on which Setup placed temporary files is not currently available to Windows XP.
You may need a manufacturer supplied device driver or you may need to run setup again and select a drive that is compatible with Windows XP for the temporary installation files.
See your Windows XP documentation for more information.
On x86 based computers, floopy disks generated by setup for non CD installations are not suitable for installing from CD
Setup cannot continue. To quit press F3
then a 2nd screen with a red progress meter appears saying that the computer will reboot in 15 seconds then it reboots with the same message going in an infinite loop.
what does this mean?
also I think one of the reasons why I'm having this problem is that not only are the two optical drives are are on the Primary Master & Slave channel
but the BIOS indicates that there are 3 more Master\Slave channels as well and the HD's are on the 3rd one
again I truly appreciate this forum trying to be the Tech support that I'm not getting with the builder.
I'm truly sorry about this as well but at least I'm learning in the same way that I did with the other computers I've had since 1994.
spacechild -
Iphone 5. Problem with authorization by Wifi spot
Dear collegues!
Now i am in business trip and tired by the problem of connection to hotel's wireless networks that use internal authorization.
I mean the situation when network itself has no password, but i have to enter login credentials in authorization window that pops up after connecting to wireless spot.
In 80% cases this window doesn't appear, i try to on/off wi-fi, reset net settings of Iphone and after some attempts of such a workaround - sacred window appears and i can work till next time connecting. It happens without any dependance.
Other devices (Android) has no such a trouble.
What can i do? Is it possible to force this extra authorization window?
Thank you!I've had this same problem with both my 4S and now my 5. I've been an iPhone owner since day 3 of the original, and I never had this problem until iOS 6. I'm now running the betas of iOS 6.1 and it still hasn't been resolved.
One of the very first things that I tried was resetting the network settings as advised above. Doesn't resolve the issue. -
Problem with authorization M_MATE_MAT
hi guys,
i have created authorization role with authorization object M_MATE_MAT
and i put the value of begru = COMM, but when i display the PR, the search help still displays all material group even the authorization group is not COMM , is there anything that i missed out, pls helpHello
No, you did not miss anything out.
But authorizations usually do not restrict the values displayed in search helps.
Regards
Uwe -
Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
"The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
HELP!!!follow this:
Launch iTunes
select iTunes Store from the menu on the left side.
sign in via the link on the top right area if you haven't done so already
click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
now reauthorize any computers as needed when the system prompts you.
good luck. -
Problems with authorization in iTunes 7
I updated to iTunes 7 and the first time I connected my iPod there were 90 songs which I have legally downloaded from iTunes which it says I do not have authorization to copy from my computer onto the iPod. Very irritating! All my other downlaods are fine. Any ideas please?
I had the same problem, but was able to solve it. See my notes here:
http://discussions.apple.com/message.jspa?messageID=3495571#3495571
You need to replace a copy of a file that iTunes creates - it's a 30-second fix (and works perfectly) - with the caveat that you must have a good backup. -
With conversion to Leopard, file problems with networked Windows computer
Last night I did an Archive & Install from Tiger to Leopard on my Intel MacBook Pro. Today, I had trouble finding the other computers at my office. Once I finally got them to show up, I opened a Word file found on another computer, made some changes, and when I tried to save it, I got this message: "This is not a valid file name. Try one or more of the following: *Check the path to make sure it was typed correctly. *Select a file from the list of files and folders." Since this file already existed and I wasn't changing the name, I thought this was odd, but I changed the name from "Seating Chart 3-8-08" to "SeatingChart3-8-08" in case Leopard didn't like spaces when talking to Windows, but I got the same error message. Finally I gave up, not knowing what to do, then discovered that it had in fact saved my file. Still, every time I try to save ANY Word document from the shared folder of the Windows computer, I get the same error message endlessly until I choose "Don't Save."
When I try to open an Excel file from that computer, it won't even open; it says " 'File Name.xls' cannot be accessed. This file may be Read-Only, or you may be trying to access a Read-Only location. Or, the server the document is stored on may not be responding." As with the Word file problem above, I did not have any problem accessing the files until I converted to Leopard.
The Windows machine is Windows XP using Microsoft Office 2003; I have Microsoft Office 2004 on my machine.See if this Link, by Pondini, offers any insight to your issue...
Transfer from Old to New
http://pondini.org/OSX/Setup.html
Also, See here if you haven't already...
http://www.apple.com/support/switch101/ Switching from PC -
Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?
Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Problem with showing My Computer in Bridge
Just upgraded PS CS4 to CS5. When I click on the favorites or the Folders tabs in Bridge and select My Computer, the program displays the drives and then starts adding My Documents over an over without stopping...after 1 minute I had >50 icons for My Computer. It was annoying because it kept displacing the drives to the right as it inserted a new My Doc icon, and I couldn't catch the icon for the other drives to open them!
In Minibridge, it displays just three duplicate My Documents icons???
Anyone have an inkling as to what might be happening here, or how to prevent it?
Many thanks,
AThanks for the help. I was the cache. I tried purging from "Edit -> Camera <br />Raw Preferences...", and that didn't fix it. Then, I tried deleting the <br />files manually (I must have missed some), and that didn't work. Finally, I <br />purged from "Edit -> Preferences -> Cache" and everything works!<br /><br />Thanks again!<br />- Jeff<br /><br /><br /><[email protected]> wrote in message <br />news:[email protected]..<br />> Jeff<br />><br />> You should read the part about ACR install on Windows, I Use Mac and can't <br />> tell you where to put it but it is a very critical install, Not difficult <br />> but you have the follow the instructions carefully and then it will work.<br />><br />> Bridge 2 has a different cache management with it's own problems, there <br />> are many treads about that in the Bridge forum. However, it does work!<br />><br />> You should go to the Bridge preferences and check the box with <br />> "Automatically Export Caches to Folder When Possible."<br />><br />> Remember that the files are by default invisible, in the menu go to View <br />> and select "show hidden files". If your cache is written to the folder <br />> there should be 2 files (blank paper with above right corner folded) and <br />> named:<br />> .BridgeCache and<br />> .BridgeCacheT
Maybe you are looking for
-
After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!
-
Connecting database in Servlet vs App
Hi, Windows 2000 Server / SQL Server 2000 / Tomcat I have a class managing the connections and requests to databases. When invoking it from a java app context (launched from the command line java myApp), it's working fine but when the same connection
-
Hi My new n95 will not start charging, any solutions to this problem please. (='.'=)This is Bunny. Copy and paste bunny into your signature to help him gain world domination
-
Differences between h:commandButton and h:commandLink
I have a problem with h:commandButton. I want to send parameters when I execute a h:commandButton, but I don't receive anything. With h:commandLink I don't have any problems for receive parameters in the next page. I don't understand why?!?!? any ide
-
Could you please enhance the pencil tool? Thanks!
I saw somewhere online that Acrobat provides good support for tablet computers and O.S. However, there is no good tool to let tablet user to write by hand. The pencil tool seems good, but when I use it to write, the first stroke will be moved/selecte